This change applies the conventions to unwrap listed in [RFC 430][rfc] to rename
non-failing `unwrap` methods to `into_inner`. This is a breaking change, but all
`unwrap` methods are retained as `#[deprecated]` for the near future. To update
code rename `unwrap` method calls to `into_inner`.
[rfc]: https://github.com/rust-lang/rfcs/pull/430
[breaking-change]
Closes#13159
cc #19091
Previously, the entire runtime API surface was publicly exposed, but
that is neither necessary nor desirable. This commit hides most of the
module, using librustrt directly as needed. The arrangement will need to
be revisited when rustrt is pulled into std.
[breaking-change]
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
Spring cleaning is here! In the Fall! This commit removes quite a large amount
of deprecated functionality from the standard libraries. I tried to ensure that
only old deprecated functionality was removed.
This is removing lots and lots of deprecated features, so this is a breaking
change. Please consult the deprecation messages of the deleted code to see how
to migrate code forward if it still needs migration.
[breaking-change]
compiletest: compact "linux" "macos" etc.as "unix".
liballoc: remove a superfluous "use".
libcollections: remove invocations of deprecated methods in favor of
their suggested replacements and use "_" for a loop counter.
libcoretest: remove invocations of deprecated methods; also add
"allow(deprecated)" for testing a deprecated method itself.
libglob: use "cfg_attr".
libgraphviz: add a test for one of data constructors.
libgreen: remove a superfluous "use".
libnum: "allow(type_overflow)" for type cast into u8 in a test code.
librustc: names of static variables should be in upper case.
libserialize: v[i] instead of get().
libstd/ascii: to_lowercase() instead of to_lower().
libstd/bitflags: modify AnotherSetOfFlags to use i8 as its backend.
It will serve better for testing various aspects of bitflags!.
libstd/collections: "allow(deprecated)" for testing a deprecated
method itself.
libstd/io: remove invocations of deprecated methods and superfluous "use".
Also add #[test] where it was missing.
libstd/num: introduce a helper function to effectively remove
invocations of a deprecated method.
libstd/path and rand: remove invocations of deprecated methods and
superfluous "use".
libstd/task and libsync/comm: "allow(deprecated)" for testing
a deprecated method itself.
libsync/deque: remove superfluous "unsafe".
libsync/mutex and once: names of static variables should be in upper case.
libterm: introduce a helper function to effectively remove
invocations of a deprecated method.
We still see a few warnings about using obsoleted native::task::spawn()
in the test modules for libsync. I'm not sure how I should replace them
with std::task::TaksBuilder and native::task::NativeTaskBuilder
(dependency to libstd?)
Signed-off-by: NODA, Kai <nodakai@gmail.com>
Rename io::timer::sleep, Timer::sleep, Timer::oneshot,
Timer::periodic, to sleep_ms, oneshot_ms, periodic_ms. These functions
all take an integer and interpret it as milliseconds.
Replacement functions will be added that take Duration.
[breaking-change]
Most stable. deschedule/failing experimental because of concerns about
naming and desirability.
Adds task::name() to replace deprecated task::with_name().
This PR is the outcome of the library stabilization meeting for the
`liballoc::owned` and `libcore::cell` modules.
Aside from the stability attributes, there are a few breaking changes:
* The `owned` modules is now named `boxed`, to better represent its
contents. (`box` was unavailable, since it's a keyword.) This will
help avoid the misconception that `Box` plays a special role wrt
ownership.
* The `AnyOwnExt` extension trait is renamed to `BoxAny`, and its `move`
method is renamed to `downcast`, in both cases to improve clarity.
* The recently-added `AnySendOwnExt` extension trait is removed; it was
not being used and is unnecessary.
[breaking-change]
Earlier commits have established a baseline of `experimental` stability
for all crates under the facade (so their contents are considered
experimental within libstd). Since `experimental` is `allow` by
default, we should use the same baseline stability for libstd itself.
This commit adds `experimental` tags to all of the modules defined in
`std`, and `unstable` to `std` itself.
When cloning a stream, the data is already guaranteed to be in a consistent
state, so there's no need to perform a zeroing. This prevents segfaults as seen
in #15231Closes#15231
This change registers new snapshots, allowing `*T` to be removed from the language. This is a large breaking change, and it is recommended that if compiler errors are seen that any FFI calls are audited to determine whether they should be actually taking `*mut T`.
This can break code that looked like:
impl Foo for Box<Any> {
fn f(&self) { ... }
}
let x: Box<Any + Send> = ...;
x.f();
Change such code to:
impl Foo for Box<Any> {
fn f(&self) { ... }
}
let x: Box<Any> = ...;
x.f();
That is, upcast before calling methods.
This is a conservative solution to #5781. A more proper treatment (see
the xfail'd `trait-contravariant-self.rs`) would take variance into
account. This change fixes the soundness hole.
Some library changes had to be made to make this work. In particular,
`Box<Any>` is no longer showable, and only `Box<Any+Send>` is showable.
Eventually, this restriction can be lifted; for now, it does not prove
too onerous, because `Any` is only used for propagating the result of
task failure.
This patch also adds a test for the variance inference work in #12828,
which accidentally landed as part of DST.
Closes#5781.
[breaking-change]
Most of the comments are available on the Task structure itself, but this commit
is aimed at making FFI-style usage of Rust tasks a little nicer.
Primarily, this commit enables re-use of tasks across multiple invocations. The
method `run` will no longer unconditionally destroy the task itself. Rather, the
task will be internally re-usable if the closure specified did not fail. Once a
task has failed once it is considered poisoned and it can never be used again.
Along the way I tried to document shortcomings of the current method of tearing
down a task, opening a few issues as well. For now none of the behavior is a
showstopper, but it's useful to acknowledge it. Also along the way I attempted
to remove as much `unsafe` code as possible, opting for safer abstractions.
This patch consolidates and cleans up the task spawning APIs:
* Removes the problematic `future_result` method from `std::task::TaskBuilder`,
and adds a `try_future` that both spawns the task and returns a future
representing its eventual result (or failure).
* Removes the public `opts` field from `TaskBuilder`, instead adding appropriate
builder methods to configure the task.
* Adds extension traits to libgreen and libnative that add methods to
`TaskBuilder` for spawning the task as a green or native thread.
Previously, there was no way to benefit from the `TaskBuilder` functionality and
also set the scheduler to spawn within.
With this change, all task spawning scenarios are supported through the
`TaskBuilder` interface.
Closes#3725.
[breaking-change]
A few notable improvements were implemented to cut down on the number of aborts
triggered by the standard library when a local task is not found.
* Primarily, the unwinding functionality was restructured to support an unsafe
top-level function, `try`. This function invokes a closure, capturing any
failure which occurs inside of it. The purpose of this function is to be as
lightweight of a "try block" as possible for rust, intended for use when the
runtime is difficult to set up.
This function is *not* meant to be used by normal rust code, nor should it be
consider for use with normal rust code.
* When invoking spawn(), a `fail!()` is triggered rather than an abort.
* When invoking LocalIo::borrow(), which is transitively called by all I/O
constructors, None is returned rather than aborting to indicate that there is
no local I/O implementation.
* Invoking get() on a TLD key will return None if no task is available
* Invoking replace() on a TLD key will fail if no task is available.
A test case was also added showing the variety of things that you can do without
a runtime or task set up now. In general, this is just a refactoring to abort
less quickly in the standard library when a local task is not found.
The compiler was updated to recognize that implementations for ty_uniq(..) are
allowed if the Box lang item is located in the current crate. This enforces the
idea that libcore cannot allocated, and moves all related trait implementations
from libcore to libstd.
This is a breaking change in that the AnyOwnExt trait has moved from the any
module to the owned module. Any previous users of std::any::AnyOwnExt should now
use std::owned::AnyOwnExt instead. This was done because the trait is intended
for Box traits and only Box traits.
[breaking-change]
These implementations must live in libstd right now because the fmt module has
not been migrated yet. This will occur in a later PR.
Just to be clear, there are new extension traits, but they are not necessary
once the std::fmt module has migrated to libcore, which is a planned migration
in the future.
This moves as much allocation as possible from teh std::str module into
core::str. This includes essentially all non-allocating functionality, mostly
iterators and slicing and such.
This primarily splits the Str trait into only having the as_slice() method,
adding a new StrAllocating trait to std::str which contains the relevant new
allocation methods. This is a breaking change if any of the methods of "trait
Str" were overriden. The old functionality can be restored by implementing both
the Str and StrAllocating traits.
[breaking-change]
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
The constructor for `TaskBuilder` is being changed to an associated
function called `new` for consistency with the rest of the standard
library.
Closes#13666
[breaking-change]
Summary:
So far, we've used the term POD "Plain Old Data" to refer to types that
can be safely copied. However, this term is not consistent with the
other built-in bounds that use verbs instead. This patch renames the Pod
kind into Copy.
RFC: 0003-opt-in-builtin-traits
Test Plan: make check
Reviewers: cmr
Differential Revision: http://phabricator.octayn.net/D3
This commit moves all logging out of the standard library into an external
crate. This crate is the new crate which is responsible for all logging macros
and logging implementation. A few reasons for this change are:
* The crate map has always been a bit of a code smell among rust programs. It
has difficulty being loaded on almost all platforms, and it's used almost
exclusively for logging and only logging. Removing the crate map is one of the
end goals of this movement.
* The compiler has a fair bit of special support for logging. It has the
__log_level() expression as well as generating a global word per module
specifying the log level. This is unfairly favoring the built-in logging
system, and is much better done purely in libraries instead of the compiler
itself.
* Initialization of logging is much easier to do if there is no reliance on a
magical crate map being available to set module log levels.
* If the logging library can be written outside of the standard library, there's
no reason that it shouldn't be. It's likely that we're not going to build the
highest quality logging library of all time, so third-party libraries should
be able to provide just as high-quality logging systems as the default one
provided in the rust distribution.
With a migration such as this, the change does not come for free. There are some
subtle changes in the behavior of liblog vs the previous logging macros:
* The core change of this migration is that there is no longer a physical
log-level per module. This concept is still emulated (it is quite useful), but
there is now only a global log level, not a local one. This global log level
is a reflection of the maximum of all log levels specified. The previously
generated logging code looked like:
if specified_level <= __module_log_level() {
println!(...)
}
The newly generated code looks like:
if specified_level <= ::log::LOG_LEVEL {
if ::log::module_enabled(module_path!()) {
println!(...)
}
}
Notably, the first layer of checking is still intended to be "super fast" in
that it's just a load of a global word and a compare. The second layer of
checking is executed to determine if the current module does indeed have
logging turned on.
This means that if any module has a debug log level turned on, all modules
with debug log levels get a little bit slower (they all do more expensive
dynamic checks to determine if they're turned on or not).
Semantically, this migration brings no change in this respect, but
runtime-wise, this will have a perf impact on some code.
* A `RUST_LOG=::help` directive will no longer print out a list of all modules
that can be logged. This is because the crate map will no longer specify the
log levels of all modules, so the list of modules is not known. Additionally,
warnings can no longer be provided if a malformed logging directive was
supplied.
The new "hello world" for logging looks like:
#[phase(syntax, link)]
extern crate log;
fn main() {
debug!("Hello, world!");
}
The `~str` type is not long for this world as it will be superseded by the
soon-to-come DST changes for the language. The new type will be
`~Str`, and matching over the allocation will no longer be supported.
Matching on `&str` will continue to work, in both a pre and post DST world.
Delete all the documentation from std::task that references linked
failure.
Tweak TaskBuilder to be more builder-like. .name() is now .named() and
.add_wrapper() is now .with_wrapper(). Remove .watched() and
.unwatched() as they didn't actually do anything.
