int/uint aren't considered FFI safe, replace them with the actual type they
represent (i64/u64 or i32/u32). This is a breaking change, but at most a cast
to `uint` or `int` needs to be added.
[breaking-change]
As of RFC 18, struct layout is undefined. Opting into a C-compatible struct
layout is now down with #[repr(C)]. For consistency, specifying a packed
layout is now also down with #[repr(packed)]. Both can be specified.
To fix errors caused by this, just add #[repr(C)] to the structs, and change
#[packed] to #[repr(packed)]
Closes#14309
[breaking-change]
declared with the same name in the same scope.
This breaks several common patterns. First are unused imports:
use foo::bar;
use baz::bar;
Change this code to the following:
use baz::bar;
Second, this patch breaks globs that import names that are shadowed by
subsequent imports. For example:
use foo::*; // including `bar`
use baz::bar;
Change this code to remove the glob:
use foo::{boo, quux};
use baz::bar;
Or qualify all uses of `bar`:
use foo::{boo, quux};
use baz;
... baz::bar ...
Finally, this patch breaks code that, at top level, explicitly imports
`std` and doesn't disable the prelude.
extern crate std;
Because the prelude imports `std` implicitly, there is no need to
explicitly import it; just remove such directives.
The old behavior can be opted into via the `import_shadowing` feature
gate. Use of this feature gate is discouraged.
This implements RFC #116.
Closes#16464.
[breaking-change]
These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
r? @nikomatsakis (or whoever)
These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
This patch primarily does two things: (1) it prevents lifetimes from
leaking out of unboxed closures; (2) it allows unboxed closure type
notation, call notation, and construction notation to construct closures
matching any of the three traits.
This breaks code that looked like:
let mut f;
{
let x = &5i;
f = |&mut:| *x + 10;
}
Change this code to avoid having a reference escape. For example:
{
let x = &5i;
let mut f; // <-- move here to avoid dangling reference
f = |&mut:| *x + 10;
}
I believe this is enough to consider unboxed closures essentially
implemented. Further issues (for example, higher-rank lifetimes) should
be filed as followups.
Closes#14449.
[breaking-change]
This fixes borrow checking for closures. Code like this will break:
struct Foo {
x: int,
}
pub fn main() {
let mut this = &mut Foo {
x: 1,
};
let r = || {
let p = &this.x;
&mut this.x;
};
r()
}
Change this code to not take multiple mutable references to the same value. For
example:
struct Foo {
x: int,
}
pub fn main() {
let mut this = &mut Foo {
x: 1,
};
let r = || {
&mut this.x;
};
r()
}
Closes#16361.
[breaking-change]
r? @nikomatsakis
`for` loop heads.
This breaks code like:
let x = Some(box 1i);
for &a in x.iter() {
}
Change this code to obey the borrow checking rules. For example:
let x = Some(box 1i);
for &ref a in x.iter() {
}
Closes#16205.
[breaking-change]
r? @nikomatsakis
`for` loop heads.
This breaks code like:
let x = Some(box 1i);
for &a in x.iter() {
}
Change this code to obey the borrow checking rules. For example:
let x = Some(box 1i);
for &ref a in x.iter() {
}
Closes#16205.
[breaking-change]
Previously the stability lint considered cross-crate items only. That's appropriate for unstable and experimental levels, but not for deprecation.
In addition to changing the lint, this PR takes care of the fallout: a number of deprecated items that were being used throughout libstd.
Closes#16409
Due to deny(deprecated), this is a:
[breaking-change]
This fixes borrow checking for closures. Code like this will break:
struct Foo {
x: int,
}
pub fn main() {
let mut this = &mut Foo {
x: 1,
};
let r = || {
let p = &this.x;
&mut this.x;
};
r()
}
Change this code to not take multiple mutable references to the same value. For
example:
struct Foo {
x: int,
}
pub fn main() {
let mut this = &mut Foo {
x: 1,
};
let r = || {
&mut this.x;
};
r()
}
Closes#16361.
[breaking-change]
Previously the lint considered cross-crate items only. That's
appropriate for unstable and experimental levels, but not for
deprecation.
Closes#16409
Due to deny(deprecation), this is a:
[breaking-change]
The fail macro defines some function/static items internally, which got
a dead_code warning when `fail!()` is used inside a dead function. This
is ugly and unnecessarily reveals implementation details, so the
warnings can be squashed.
Fixes#16192.
The fail macro defines some function/static items internally, which got
a dead_code warning when `fail!()` is used inside a dead function. This
is ugly and unnecessarily reveals implementation details, so the
warnings can be squashed.
Fixes#16192.
This requires avoiding `quote_...!` for constructing the parts of the
__test module, since that stringifies and reinterns the idents, losing
the special gensym'd nature of them. (#15962.)
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
This requires avoiding `quote_...!` for constructing the parts of the
__test module, since that stringifies and reinterns the idents, losing
the special gensym'd nature of them. (#15962.)
meaning `'b outlives 'a`. Syntax currently does nothing but is needed for full
fix to #5763. To use this syntax, the issue_5763_bootstrap feature guard is
required.
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
Generic extern functions written in Rust have their names mangled, as well as their internal clownshoe __rust_abi functions. This allows e.g. specific monomorphizations of these functions to be used as callbacks.
Closes#12502.
The `type_overflow` lint, doesn't catch the overflow for `i64` because
the overflow happens earlier in the parse phase when the `u64` as biggest
possible int gets casted to `i64` , without checking the for overflows.
We can't lint in the parse phase, so a refactoring of the `LitInt` type
was necessary.
The types `LitInt`, `LitUint` and `LitIntUnsuffixed` where merged to one
type `LitInt` which stores it's value as `u64`. An additional parameter was
added which indicate the signedness of the type and the sign of the value.
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
This is an alternative to upgrading the way rvalues are handled in the
borrow check. Making rvalues handled more like lvalues in the borrow
check caused numerous problems related to double mutable borrows and
rvalue scopes. Rather than come up with more borrow check rules to try
to solve these problems, I decided to just forbid pattern bindings after
`@`. This affected fewer than 10 lines of code in the compiler and
libraries.
This breaks code like:
match x {
y @ z => { ... }
}
match a {
b @ Some(c) => { ... }
}
Change this code to use nested `match` or `let` expressions. For
example:
match x {
y => {
let z = y;
...
}
}
match a {
Some(c) => {
let b = Some(c);
...
}
}
Closes#14587.
[breaking-change]
Remove the ability of the borrow checker to determine that repeated
dereferences of a Box<T> refer to the same memory object. This will
usually require one of two workarounds:
1) The interior of a Box<T> will sometimes need to be moved / borrowed
into a temporary before moving / borrowing individual derived paths.
2) A `ref x` pattern will have to be replaced with a `box ref x`
pattern.
Fixes#16094.
[breaking-change]
the CFG for match statements.
There were two bugs in issue #14684. One was simply that the borrow
check didn't know about the correct CFG for match statements: the
pattern must be a predecessor of the guard. This disallows the bad
behavior if there are bindings in the pattern. But it isn't enough to
prevent the memory safety problem, because of wildcards; thus, this
patch introduces a more restrictive rule, which disallows assignments
and mutable borrows inside guards outright.
I discussed this with Niko and we decided this was the best plan of
action.
This breaks code that performs mutable borrows in pattern guards. Most
commonly, the code looks like this:
impl Foo {
fn f(&mut self, ...) {}
fn g(&mut self, ...) {
match bar {
Baz if self.f(...) => { ... }
_ => { ... }
}
}
}
Change this code to not use a guard. For example:
impl Foo {
fn f(&mut self, ...) {}
fn g(&mut self, ...) {
match bar {
Baz => {
if self.f(...) {
...
} else {
...
}
}
_ => { ... }
}
}
}
Sometimes this can result in code duplication, but often it illustrates
a hidden memory safety problem.
Closes#14684.
[breaking-change]
r? @pnkfelix
This commit applies stability attributes to the contents of these modules,
summarized here:
* The `unit` and `bool` modules have become #[unstable] as they are purely meant
for documentation purposes and are candidates for removal.
* The `ty` module has been deprecated, and the inner `Unsafe` type has been
renamed to `UnsafeCell` and moved to the `cell` module. The `marker1` field
has been removed as the compiler now always infers `UnsafeCell` to be
invariant. The `new` method i stable, but the `value` field, `get` and
`unwrap` methods are all unstable.
* The `tuple` module has its name as stable, the naming of the `TupleN` traits
as stable while the methods are all #[unstable]. The other impls in the module
have appropriate stability for the corresponding trait.
* The `arc` module has received the exact same treatment as the `rc` module
previously did.
* The `any` module has its name as stable. The `Any` trait is also stable, with
a new private supertrait which now contains the `get_type_id` method. This is
to make the method a private implementation detail rather than a public-facing
detail.
The two extension traits in the module are marked #[unstable] as they will not
be necessary with DST. The `is` method is #[stable], the as_{mut,ref} methods
have been renamed to downcast_{mut,ref} and are #[unstable].
The extension trait `BoxAny` has been clarified as to why it is unstable as it
will not be necessary with DST.
This is a breaking change because the `marker1` field was removed from the
`UnsafeCell` type. To deal with this change, you can simply delete the field and
only specify the value of the `data` field in static initializers.
[breaking-change]
Rename and gensym the runtime on import, so that users
can't refer to the `native` crate.
This is unlikely to break code, but users should import the "native" crate directly.
[breaking-change]
cc @alexcrichton
the CFG for match statements.
There were two bugs in issue #14684. One was simply that the borrow
check didn't know about the correct CFG for match statements: the
pattern must be a predecessor of the guard. This disallows the bad
behavior if there are bindings in the pattern. But it isn't enough to
prevent the memory safety problem, because of wildcards; thus, this
patch introduces a more restrictive rule, which disallows assignments
and mutable borrows inside guards outright.
I discussed this with Niko and we decided this was the best plan of
action.
This breaks code that performs mutable borrows in pattern guards. Most
commonly, the code looks like this:
impl Foo {
fn f(&mut self, ...) {}
fn g(&mut self, ...) {
match bar {
Baz if self.f(...) => { ... }
_ => { ... }
}
}
}
Change this code to not use a guard. For example:
impl Foo {
fn f(&mut self, ...) {}
fn g(&mut self, ...) {
match bar {
Baz => {
if self.f(...) {
...
} else {
...
}
}
_ => { ... }
}
}
}
Sometimes this can result in code duplication, but often it illustrates
a hidden memory safety problem.
Closes#14684.
[breaking-change]
method calls are involved.
This breaks code like:
impl<T:Copy> Foo for T { ... }
fn take_param<T:Foo>(foo: &T) { ... }
fn main() {
let x = box 3i; // note no `Copy` bound
take_param(&x);
}
Change this code to not contain a type error. For example:
impl<T:Copy> Foo for T { ... }
fn take_param<T:Foo>(foo: &T) { ... }
fn main() {
let x = 3i; // satisfies `Copy` bound
take_param(&x);
}
Closes#15860.
[breaking-change]
r? @alexcrichton
method calls are involved.
This breaks code like:
impl<T:Copy> Foo for T { ... }
fn take_param<T:Foo>(foo: &T) { ... }
fn main() {
let x = box 3i; // note no `Copy` bound
take_param(&x);
}
Change this code to not contain a type error. For example:
impl<T:Copy> Foo for T { ... }
fn take_param<T:Foo>(foo: &T) { ... }
fn main() {
let x = 3i; // satisfies `Copy` bound
take_param(&x);
}
Closes#15860.
[breaking-change]
librustc: Stop desugaring `for` expressions and translate them directly.
This makes edge cases in which the `Iterator` trait was not in scope
and/or `Option` or its variants were not in scope work properly.
This breaks code that looks like:
struct MyStruct { ... }
impl MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
for x in MyStruct { ... } { ... }
Change ad-hoc `next` methods like the above to implementations of the
`Iterator` trait. For example:
impl Iterator<int> for MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
Closes#15392.
[breaking-change]
This makes edge cases in which the `Iterator` trait was not in scope
and/or `Option` or its variants were not in scope work properly.
This breaks code that looks like:
struct MyStruct { ... }
impl MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
for x in MyStruct { ... } { ... }
Change ad-hoc `next` methods like the above to implementations of the
`Iterator` trait. For example:
impl Iterator<int> for MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
Closes#15392.
[breaking-change]
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
r? @nick29581
This is accomplished by rewriting static expressions into equivalent patterns.
This way, patterns referencing static variables can both participate
in exhaustiveness analysis as well as be compiled down into the appropriate
branch of the decision trees that match expressions are codegened to.
Fixes#6533.
Fixes#13626.
Fixes#13731.
Fixes#14576.
Fixes#15393.
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
The first is to require that `#[crate_name]` and `--crate-name` always match (if both are specified). The second is to fix parallel compilation in cargo by mixing in `-C extra-filename` into the temporary outputs of the compiler.
When invoking the compiler in parallel, the intermediate output of the object
files and bytecode can stomp over one another if two crates with the same name
are being compiled.
The output file is already being disambiguated with `-C extra-filename`, so this
commit alters the naming of the temporary files to also mix in the extra
filename to ensure that file names don't clash.
This is accomplished by rewriting static expressions into equivalent patterns.
This way, patterns referencing static variables can both participate
in exhaustiveness analysis as well as be compiled down into the appropriate
branch of the decision trees that match expressions are codegened to.
Fixes#6533.
Fixes#13626.
Fixes#13731.
Fixes#14576.
Fixes#15393.
Part of the original discussions around the `--crate-name` flag brought up that
mass confusion can arise when the flag specifies a different name than is
contained in the crate.
The current primary use case of the `--crate-name` flag is through cargo and
not requiring a `#[crate_name]` attribute, but if the `#[crate_name]` attribute
is specified it will likely go awry when the two names deviate from one another.
This commit requires that if both are provided they both match to prevent this
confusion.
Importing from types was disallowed in #6462. Flag was set for paths whether it is a module or a type. Type flag was set when impl was seen. The problem is, for cross-crate situations, when reexport is involved, it is possible that impl is seen too late because metadata is loaded lazily.
Fix#15664.
This small patch causes the stability lint to bail out when traversing
any AST produced via a macro expansion. Ultimately, we would like to
lint the contents of the macro at the place where the macro is defined,
but regardless we should not be linting it at the use site.
Closes#15703
except where trait objects are involved.
Part of issue #15349, though I'm leaving it open for trait objects.
Cross borrowing for trait objects remains because it is needed until we
have DST.
This will break code like:
fn foo(x: &int) { ... }
let a = box 3i;
foo(a);
Change this code to:
fn foo(x: &int) { ... }
let a = box 3i;
foo(&*a);
[breaking-change]
This makes two changes to region inference: (1) it allows region
inference to relate early-bound regions; and (2) it allows regions to be
related before variance runs. The former is needed because there is no
relation between the two regions before region substitution happens,
while the latter is needed because type collection has to run before
variance. We assume that, before variance is inferred, that lifetimes
are invariant. This is a conservative overapproximation.
This relates to #13885. This does not remove `~self` from the language
yet, however.
[breaking-change]
This small patch causes the stability lint to bail out when traversing
any AST produced via a macro expansion. Ultimately, we would like to
lint the contents of the macro at the place where the macro is defined,
but regardless we should not be linting it at the use site.
Closes#15703
Closes#15525
The important bit of this are the changes from line 445 in mem_categorization.rs. Most of the other changes are about adding an Implicit PointerKind, and this is only necessary for getting a decent error message :-s An alternative would have been to add an implciti/explicit flag to cat_deref, which could be mostly ignored and so would mean much fewer changes. However, the implicit state would only be valid if the PointerKind was BorrowedPtr, so it felt like it ought to be another kind of PointerKind. I still don't know which is the better design.
This PR is the outcome of the library stabilization meeting for the
`liballoc::owned` and `libcore::cell` modules.
Aside from the stability attributes, there are a few breaking changes:
* The `owned` modules is now named `boxed`, to better represent its
contents. (`box` was unavailable, since it's a keyword.) This will
help avoid the misconception that `Box` plays a special role wrt
ownership.
* The `AnyOwnExt` extension trait is renamed to `BoxAny`, and its `move`
method is renamed to `downcast`, in both cases to improve clarity.
* The recently-added `AnySendOwnExt` extension trait is removed; it was
not being used and is unnecessary.
[breaking-change]
This PR is the outcome of the library stabilization meeting for the
`liballoc::owned` and `libcore::cell` modules.
Aside from the stability attributes, there are a few breaking changes:
* The `owned` modules is now named `boxed`, to better represent its
contents. (`box` was unavailable, since it's a keyword.) This will
help avoid the misconception that `Box` plays a special role wrt
ownership.
* The `AnyOwnExt` extension trait is renamed to `BoxAny`, and its `move`
method is renamed to `downcast`, in both cases to improve clarity.
* The recently-added `AnySendOwnExt` extension trait is removed; it was
not being used and is unnecessary.
[breaking-change]
* Don't warn about `#[crate_name]` if `--crate-name` is specified
* Don't warn about non camel case identifiers on `#[repr(C)]` structs
* Switch `mode` to `mode_t` in libc.
This is a continuation of @brson's work from https://github.com/rust-lang/rust/pull/12144.
This implements the minimal scaffolding that allows mapping diagnostic messages to alpha-numeric codes, which could improve the searchability of errors. In addition, there's a new compiler option, `--explain {code}` which takes an error code and prints out a somewhat detailed explanation of the error. Example:
```rust
fn f(x: Option<bool>) {
match x {
Some(true) | Some(false) => (),
None => (),
Some(true) => ()
}
}
```
```shell
[~/rust]$ ./build/x86_64-apple-darwin/stage2/bin/rustc ./diagnostics.rs --crate-type dylib
diagnostics.rs:5:3: 5:13 error: unreachable pattern [E0001] (pass `--explain E0001` to see a detailed explanation)
diagnostics.rs:5 Some(true) => ()
^~~~~~~~~~
error: aborting due to previous error
[~/rust]$ ./build/x86_64-apple-darwin/stage2/bin/rustc --explain E0001
This error suggests that the expression arm corresponding to the noted pattern
will never be reached as for all possible values of the expression being matched,
one of the preceeding patterns will match.
This means that perhaps some of the preceeding patterns are too general, this
one is too specific or the ordering is incorrect.
```
I've refrained from migrating many errors to actually use the new macros as it can be done in an incremental fashion but if we're happy with the approach, it'd be good to do all of them sooner rather than later.
Originally, I was going to make libdiagnostics a separate crate but that's posing some interesting challenges with semi-circular dependencies. In particular, librustc would have a plugin-phase dependency on libdiagnostics, which itself depends on librustc. Per my conversation with @alexcrichton, it seems like the snapshotting process would also have to change. So for now the relevant modules from libdiagnostics are included using `#[path = ...] mod`.
C structs predominately do not use camel case identifiers, and we have a clear
indicator for what's a C struct now, so excuse all of them from this stylistic
lint.
Similar to the stability attributes, a type annotated with `#[must_use =
"informative snippet"]` will print the normal warning message along with
"informative snippet". This allows the type author to provide some
guidance about why the type should be used.
---
It can be a little unintuitive that something like `v.iter().map(|x|
println!("{}", x));` does nothing: the majority of the iterator adaptors
are lazy and do not execute anything until something calls `next`, e.g.
a `for` loop, `collect`, `fold`, etc.
The majority of such errors can be seen by someone writing something
like the above, i.e. just calling an iterator adaptor and doing nothing
with it (and doing this is certainly useless), so we can co-opt the
`must_use` lint, using the message functionality to give a hint to the
reason why.
Fixes#14666.
Similar to the stability attributes, a type annotated with `#[must_use =
"informative snippet"]` will print the normal warning message along with
"informative snippet". This allows the type author to provide some
guidance about why the type should be used.
This updates https://github.com/rust-lang/rust/pull/15075.
Rename `ToStr::to_str` to `ToString::to_string`. The naive renaming ends up with two `to_string` functions defined on strings in the prelude (the other defined via `collections::str::StrAllocating`). To remedy this I removed `StrAllocating::to_string`, making all conversions from `&str` to `String` go through `Show`. This has a measurable impact on the speed of this conversion, but the sense I get from others is that it's best to go ahead and unify `to_string` and address performance for all `to_string` conversions in `core::fmt`. `String::from_str(...)` still works as a manual fast-path.
Note that the patch was done with a script, and ended up renaming a number of other `*_to_str` functions, particularly inside of rustc. All the ones I saw looked correct, and I didn't notice any additional API breakage.
Closes#15046.
closes#13367
[breaking-change] Use `Sized?` to indicate a dynamically sized type parameter or trait (used to be `type`). E.g.,
```
trait Tr for Sized? {}
fn foo<Sized? X: Share>(x: X) {}
```
This will break code that looks like:
struct Foo {
...
}
mod Foo {
...
}
Change this code to:
struct Foo {
...
}
impl Foo {
...
}
Or rename the module.
Closes#15205.
[breaking-change]
r? @nick29581
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
r? @nick29581
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
This will break code that looks like:
struct Foo {
...
}
mod Foo {
...
}
Change this code to:
struct Foo {
...
}
impl Foo {
...
}
Or rename the module.
Closes#15205.
[breaking-change]
This was parsed by the parser but completely ignored; not even stored in
the AST!
This breaks code that looks like:
static X: &'static [u8] = &'static [1, 2, 3];
Change this code to the shorter:
static X: &'static [u8] = &[1, 2, 3];
Closes#15312.
[breaking-change]
parameters.
This can break code that mistakenly used type parameters in place of
`Self`. For example, this will break:
trait Foo {
fn bar<X>(u: X) -> Self {
u
}
}
Change this code to not contain a type error. For example:
trait Foo {
fn bar<X>(_: X) -> Self {
self
}
}
Closes#15172.
[breaking-change]
r? @alexcrichton
This can break code that looked like:
struct S<T> {
val: T,
}
trait Gettable<T> {
...
}
impl<T: Copy> Gettable<T> for S<T> {
...
}
let t: Box<S<String>> = box S {
val: "one".to_string(),
};
let a = t as Box<Gettable<String>>;
// ^ note no `Copy` bound
Change this code to:
impl<T> Gettable<T> for S<T> {
// ^ remove `Copy` bound
...
}
Closes#14061.
[breaking-change]
with the corresponding trait parameter bounds.
This is a version of the patch in PR #12611 by Florian Hahn, modified to
address Niko's feedback.
It does not address the issue of duplicate type parameter bounds, nor
does it address the issue of implementation-defined methods that contain
*fewer* bounds than the trait, because Niko's review indicates that this
should not be necessary (and indeed I believe it is not). A test has
been added to ensure that this works.
This will break code like:
trait Foo {
fn bar<T:Baz>();
}
impl Foo for Boo {
fn bar<T:Baz + Quux>() { ... }
// ^~~~ ERROR
}
This will be rejected because the implementation requires *more* bounds
than the trait. It can be fixed by either adding the missing bound to
the trait:
trait Foo {
fn bar<T:Baz + Quux>();
// ^~~~
}
impl Foo for Boo {
fn bar<T:Baz + Quux>() { ... } // OK
}
Or by removing the bound from the impl:
trait Foo {
fn bar<T:Baz>();
}
impl Foo for Boo {
fn bar<T:Baz>() { ... } // OK
// ^ remove Quux
}
This patch imports the relevant tests from #2687, as well as the test
case in #5886, which is fixed as well by this patch.
Closes#2687.
Closes#5886.
[breaking-change]
r? @pnkfelix
parameters.
This can break code that mistakenly used type parameters in place of
`Self`. For example, this will break:
trait Foo {
fn bar<X>(u: X) -> Self {
u
}
}
Change this code to not contain a type error. For example:
trait Foo {
fn bar<X>(_: X) -> Self {
self
}
}
Closes#15172.
[breaking-change]
Slice patterns are different from the rest in that a single slice pattern
does not have a distinct constructor if it contains a variable-length subslice
pattern. For example, the pattern [a, b, ..tail] can match a slice of length 2, 3, 4
and so on.
As a result, the decision tree for exhaustiveness and redundancy analysis should
explore each of those constructors separately to determine if the pattern could be useful
when specialized for any of them.
with the corresponding trait parameter bounds.
This is a version of the patch in PR #12611 by Florian Hahn, modified to
address Niko's feedback.
It does not address the issue of duplicate type parameter bounds, nor
does it address the issue of implementation-defined methods that contain
*fewer* bounds than the trait, because Niko's review indicates that this
should not be necessary (and indeed I believe it is not). A test has
been added to ensure that this works.
This will break code like:
trait Foo {
fn bar<T:Baz>();
}
impl Foo for Boo {
fn bar<T:Baz + Quux>() { ... }
// ^~~~ ERROR
}
This will be rejected because the implementation requires *more* bounds
than the trait. It can be fixed by either adding the missing bound to
the trait:
trait Foo {
fn bar<T:Baz + Quux>();
// ^~~~
}
impl Foo for Boo {
fn bar<T:Baz + Quux>() { ... } // OK
}
Or by removing the bound from the impl:
trait Foo {
fn bar<T:Baz>();
}
impl Foo for Boo {
fn bar<T:Baz>() { ... } // OK
// ^ remove Quux
}
This patch imports the relevant tests from #2687, as well as the test
case in #5886, which is fixed as well by this patch.
Closes#2687.
Closes#5886.
[breaking-change]
Being able to index into the bytes of a string encourages
poor UTF-8 hygiene. To get a view of `&[u8]` from either
a `String` or `&str` slice, use the `as_bytes()` method.
Closes#12710.
[breaking-change]
I ended up altering the semantics of Json's PartialOrd implementation.
It used to be the case that Null < Null, but I can't think of any reason
for an ordering other than the default one so I just switched it over to
using the derived implementation.
This also fixes broken `PartialOrd` implementations for `Vec` and
`TreeMap`.
RFC: 0028-partial-cmp
floating point numbers for real.
This will break code that looks like:
let mut x = 0;
while ... {
x += 1;
}
println!("{}", x);
Change that code to:
let mut x = 0i;
while ... {
x += 1;
}
println!("{}", x);
Closes#15201.
[breaking-change]
This change registers new snapshots, allowing `*T` to be removed from the language. This is a large breaking change, and it is recommended that if compiler errors are seen that any FFI calls are audited to determine whether they should be actually taking `*mut T`.
I believe that #5781 got fixed by the DST work. It duplicated the
variance inference work in #12828. Therefore, all that is left in #5781
is adding a test.
Closes#5781.
r? @huonw
This can break code that looked like:
impl Foo for Box<Any> {
fn f(&self) { ... }
}
let x: Box<Any + Send> = ...;
x.f();
Change such code to:
impl Foo for Box<Any> {
fn f(&self) { ... }
}
let x: Box<Any> = ...;
x.f();
That is, upcast before calling methods.
This is a conservative solution to #5781. A more proper treatment (see
the xfail'd `trait-contravariant-self.rs`) would take variance into
account. This change fixes the soundness hole.
Some library changes had to be made to make this work. In particular,
`Box<Any>` is no longer showable, and only `Box<Any+Send>` is showable.
Eventually, this restriction can be lifted; for now, it does not prove
too onerous, because `Any` is only used for propagating the result of
task failure.
This patch also adds a test for the variance inference work in #12828,
which accidentally landed as part of DST.
Closes#5781.
[breaking-change]
Since procs do not have lifetime bounds, we must do this to maintain
safety.
This can break code that incorrectly captured references in procedure
types. Change such code to not do this, perhaps with a trait object
instead.
A better solution would be to add higher-rank lifetime support to procs.
However, this would be a lot of work for a feature we want to remove in
favor of unboxed closures. The corresponding "real fix" is #15067.
Closes#14036.
[breaking-change]
It turns out that bindings introduced by 'for' loops were not treated hygienically. The fix for this is to make the 'for' expansion more like a macro; rather than expanding sub-pieces and then assembling them, we need to rewrite the for and then call expand again on the whole thing.
This PR includes a test and the fix.
It also contains a number of other things:
- unit tests for other forms of hygiene (currently ignored)
- a fix for the isaac.rs macro that (it turned out) was relying on capturing
- other miscellaneous cleanup and comments
This will break code like:
fn f(x: &mut int) {}
let mut a = box 1i;
f(a);
Change it to:
fn f(x: &mut int) {}
let mut a = box 1i;
f(&mut *a);
RFC 33; issue #10504.
[breaking-change]
r? @brson
vector-reference-to-unsafe-pointer-to-element cast if the type to be
casted to is not fully specified.
This is a conservative change to fix the user-visible symptoms of the
issue. A more flexible treatment would delay cast checks to after
function typechecking.
This can break code that did:
let x: *u8 = &([0, 0]) as *_;
Change this code to:
let x: *u8 = &([0, 0]) as *u8;
Closes#14893.
[breaking-change]
This will break code like:
fn f(x: &mut int) {}
let mut a = box 1i;
f(a);
Change it to:
fn f(x: &mut int) {}
let mut a = box 1i;
f(&mut *a);
RFC 33; issue #10504.
[breaking-change]
Closes#14482 (std: Bring back half of Add on String)
Closes#15026 (librustc: Remove the fallback to `int` from typechecking.)
Closes#15119 (Add more description to c_str::unwrap().)
Closes#15120 (Add tests for #12470 and #14285)
Closes#15122 (Remove the cheat sheet.)
Closes#15126 (rustc: Always include the morestack library)
Closes#15127 (Improve ambiguous pronoun.)
Closes#15130 (Fix#15129)
Closes#15131 (Add the Guide, add warning to tutorial.)
Closes#15134 (Xfailed tests for hygiene, etc.)
Closes#15135 (core: Add stability attributes to Clone)
Closes#15136 (Some minor improvements to core::bool)
Closes#15137 (std: Add stability attributes to primitive numeric modules)
Closes#15141 (Fix grammar in tutorial)
Closes#15143 (Remove few FIXMEs)
Closes#15145 (Avoid unnecessary temporary on assignments)
Closes#15147 (Small improvements for metaprogramming)
Closes#15153 (librustc: Check function argument patterns for legality of by-move)
Closes#15154 (test: Add a test for regions, traits, and variance.)
Closes#15159 (rustc: Don't register syntax crates twice)
Closes#13816 (Stabilize version output for rustc and rustdoc)
bindings.
This will break code that incorrectly did things like:
fn f(a @ box b: Box<String>) {}
Fix such code to not rely on undefined behavior.
Closes#12534.
[breaking-change]
The #14869 removed `TraitStore` from `ty_trait` and represented trait
reference as regular `ty_rptr`. An old bug of the missing constraint
upon lifetime parameter of trait reference then is fixed as a side
effect. Adds tests for affected bugs and closes them.
Closes#12470.
Closes#14285.
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
If you define lang items in your crate, add `#[feature(lang_items)]`.
If you define intrinsics (`extern "rust-intrinsic"`), add
`#[feature(intrinsics)]`.
Closes#12858.
[breaking-change]
Unit-like structs are written as `struct Foo;`, but we erroneously
accepted `struct Foo();` and took it to mean the same thing. Now we
don't, so use the `struct Foo;` form!
[breaking-change]
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
This PR is changing the error messages for non-exhaustive pattern matching to include a more accurate witness, i.e. a pattern that is not covered by any of the ones provided by the user. Example:
```rust
fn main() {
match (true, (Some("foo"), [true, true]), Some(42u)) {
(false, _, _) => (),
(true, (None, [true, _]), None) => (),
(true, (None, [false, _]), Some(1u)) => ()
}
}
```
```sh
/tmp/witness.rs:2:2: 6:3 error: non-exhaustive patterns: (true, (core::option::Some(_), _), _) not covered
/tmp/witness.rs:2 match (true, (Some("foo"), [true, true]), Some(42u)) {
/tmp/witness.rs:3 (false, _, _) => (),
/tmp/witness.rs:4 (true, (None, [true, _]), None) => (),
/tmp/witness.rs:5 (true, (None, [false, _]), Some(1u)) => ()
/tmp/witness.rs:6 }
```
As part of that, I refactored some of the relevant code and carried over the changes to fixed vectors from the previous PR.
I'm putting it out there for now but the tests will be red.
Closes#8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
The lexer already ignores CRLF in between tokens, but it doesn't
properly handle carriage returns inside strings and doc comments. Teach
it to treat CRLF as LF inside these tokens, and to disallow carriage
returns that are not followed by linefeeds. This includes handling an
escaped CRLF inside a regular string token the same way it handles an
escaped LF.
This is technically a breaking change, as bare carriage returns are no
longer allowed, and CRLF sequences are now treated as LF inside strings
and doc comments, but it's very unlikely to actually affect any
real-world code.
This change is necessary to have Rust code compile on Windows the same
way it does on Unix. The mozilla/rust repository explicitly sets eol=lf
for Rust source files, but other Rust repositories don't. Notably,
rust-http cannot be compiled on Windows without converting the CRLF line
endings back to LF.
[breaking-change]
The lexer already ignores CRLF in between tokens, but it doesn't
properly handle carriage returns inside strings and doc comments. Teach
it to treat CRLF as LF inside these tokens, and to disallow carriage
returns that are not followed by linefeeds. This includes handling an
escaped CRLF inside a regular string token the same way it handles an
escaped LF.
This is technically a breaking change, as bare carriage returns are no
longer allowed, and CRLF sequences are now treated as LF inside strings
and doc comments, but it's very unlikely to actually affect any
real-world code.
This change is necessary to have Rust code compile on Windows the same
way it does on Unix. The mozilla/rust repository explicitly sets eol=lf
for Rust source files, but other Rust repositories don't. Notably,
rust-http cannot be compiled on Windows without converting the CRLF line
endings back to LF.
[breaking-change]
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
thereof.)
PR 14739 injected the new message that this removes from one test
case: borrowck-vec-pattern-loan-from-mut.rs
When reviewing the test case, I was not able to convince myself that
the error message was a legitimate thing to start emitting. Niko did
not see an obvious reason for it either, so I am going to remove it
and wait for someone (maybe Cameron Zwarich) to explain to me why we
should be emitting it.
This removes all remnants of `@` pointers from rustc. Additionally, this removes
the `GC` structure from the prelude as it seems odd exporting an experimental
type in the prelude by default.
Closes#14193
[breaking-change]
Implement the stronger guarantees for mutable borrows from #12624. This
removes the ability to read from a mutably borrowed path for the
duration of the borrow, and enforces a unique access path for any
mutable borrow, for both reads and writes.
This makes mutable borrows work better with concurrent accesses from
multiple threads, and it opens the door for allowing moves out of
mutably borrowed values, as long as a new value is written before the
mutable borrow ends. This also aligns Rust more closely with academic
languages based on substructural types and separation logic.
The most common situation triggering an error after this change is a
call to a function mutably borrowing self with self.field as one of the
arguments. The workaround is to bind self.field to a temporary, but the
need for these temporaries will hopefully go away after #6268 is fixed.
Another situation that triggers an error is using the head expression of
a match in an arm that binds a variable with a mutable reference. The
use of the head expression needs to be replaced with an expression that
reconstructs it from match-bound variables.
This fixes#12624.
[breaking-change]
Currently analyze_move_out_from checks all restrictions on all base
paths of the move path, but it only needs to check restrictions from
loans of the base paths, and can disregard restrictions from loans of
extensions of those base paths.
Closes#14797 (librustc: Fix the issue with labels shadowing variable names by making)
Closes#14823 (Improve error messages for io::fs)
Closes#14827 (libsyntax: Allow `+` to separate trait bounds from objects.)
Closes#14834 (configure: Don't sync unused submodules)
Closes#14838 (Remove typo on collections::treemap::UnionItems)
Closes#14839 (Fix the unused struct field lint for struct variants)
Closes#14840 (Clarify `Any` docs)
Closes#14846 (rustc: [T, ..N] and [T, ..N+1] are not the same)
Closes#14847 (Audit usage of NativeMutex)
Closes#14850 (remove unnecessary PaX detection)
Closes#14856 (librustc: Take in account mutability when casting array to raw ptr.)
Closes#14859 (librustc: Forbid `transmute` from being called on types whose size is)
Closes#14860 (Fix `quote_pat!` & parse outer attributes in `quote_item!`)
only known post-monomorphization, and report `transmute` errors before
the code is generated for that `transmute`.
This can break code that looked like:
unsafe fn f<T>(x: T) {
let y: int = transmute(x);
}
Change such code to take a type parameter that has the same size as the
type being transmuted to.
Closes#12898.
[breaking-change]
RFC #27.
After a snapshot, the old syntax will be removed.
This can break some code that looked like `foo as &Trait:Send`. Now you
will need to write `foo as (&Trait+Send)`.
Closes#12778.
[breaking-change]
the leading quote part of the identifier for the purposes of hygiene.
This adopts @jbclements' solution to #14539.
I'm not sure if this is a breaking change or not.
Closes#12512.
[breaking-change]
parameters
This involves numerous substeps:
1. Treat Self same as any other parameter.
2. No longer compute offsets for method parameters.
3. Store all generic types (both trait/impl and method) with a method,
eliminating odd discrepancies.
4. Stop doing unspeakable things to static methods and instead just use
the natural types, now that we can easily add the type parameters from
trait into the method's polytype.
5. No doubt some more. It was hard to separate these into distinct commits.
Fixes#13564
* The select/plural methods from format strings are removed
* The # character no longer needs to be escaped
* The \-based escapes have been removed
* '{{' is now an escape for '{'
* '}}' is now an escape for '}'
Closes#14810
[breaking-change]
* The select/plural methods from format strings are removed
* The # character no longer needs to be escaped
* The \-based escapes have been removed
* '{{' is now an escape for '{'
* '}}' is now an escape for '}'
Closes#14810
[breaking-change]
The following features have been removed
* box [a, b, c]
* ~[a, b, c]
* box [a, ..N]
* ~[a, ..N]
* ~[T] (as a type)
* deprecated_owned_vector lint
All users of ~[T] should move to using Vec<T> instead.
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This uncovered some dead code, most notably in middle/liveness.rs, which I think suggests there must be something fishy with that part of the code.
The #[allow(dead_code)] annotations on some of the fields I am not super happy about but as I understand, marker type may disappear at some point.
This commit moves Mutable, Map, MutableMap, Set, and MutableSet from
`core::collections` to the `collections` crate at the top-level. Additionally,
this removes the `deque` module and moves the `Deque` trait to only being
available at the top-level of the collections crate.
All functionality continues to be reexported through `std::collections`.
[breaking-change]
After sitting down to build on the work merged in #14318, I realized that some of the test names were not clear, others probably weren't testing the right thing, and they were also not as exhaustive as they could have been.
Instead of calling a borrow() function that takes a pointer type, just
create a local pointer and dereference it. The dereference is there to
outsmart any future liveness analysis in borrowck.
The move_after_borrow / fu_move_after_borrow tests in
run-pass/borrowck-field-sensitivity.rs are not testing the right thing,
since the scope of the borrow is limited to the call to borrow(). When
fixed, these tests fail and thus should be moved to the corresponding
compile-fail test file.
Some of the borrowck field-sensitivity test functions have 'use' in
their name, but they don't refer to the specific kind of use (whether a
copy or a deref). It would be better if the name more precisely
reflected what the function is testing.
When converting check_loans to use ExprUseVisitor I encountered a few
issues where the wrong number of errors were being emitted for multiple
closure captures, but there is no existing test for this.
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
Make check_for_assignment_to_restricted_or_frozen_location treat
mutation through an owning pointer the same way it treats mutation
through an &mut pointer, where mutability must be inherited from the
base path.
I also included GC pointers in this check, as that is what the
corresponding code in gather_loans/restrictions.rs does, but I don't
think there is a way to test this with the current language.
Fixes#14498.
Make check_for_assignment_to_restricted_or_frozen_location treat
mutation through an owning pointer the same way it treats mutation
through an &mut pointer, where mutability must be inherited from the
base path.
I also included GC pointers in this check, as that is what the
corresponding code in gather_loans/restrictions.rs does, but I don't
think there is a way to test this with the current language.
Fixes#14498.
This commit shuffles around some of the `rand` code, along with some
reorganization. The new state of the world is as follows:
* The librand crate now only depends on libcore. This interface is experimental.
* The standard library has a new module, `std::rand`. This interface will
eventually become stable.
Unfortunately, this entailed more of a breaking change than just shuffling some
names around. The following breaking changes were made to the rand library:
* Rng::gen_vec() was removed. This has been replaced with Rng::gen_iter() which
will return an infinite stream of random values. Previous behavior can be
regained with `rng.gen_iter().take(n).collect()`
* Rng::gen_ascii_str() was removed. This has been replaced with
Rng::gen_ascii_chars() which will return an infinite stream of random ascii
characters. Similarly to gen_iter(), previous behavior can be emulated with
`rng.gen_ascii_chars().take(n).collect()`
* {IsaacRng, Isaac64Rng, XorShiftRng}::new() have all been removed. These all
relied on being able to use an OSRng for seeding, but this is no longer
available in librand (where these types are defined). To retain the same
functionality, these types now implement the `Rand` trait so they can be
generated with a random seed from another random number generator. This allows
the stdlib to use an OSRng to create seeded instances of these RNGs.
* Rand implementations for `Box<T>` and `@T` were removed. These seemed to be
pretty rare in the codebase, and it allows for librand to not depend on
liballoc. Additionally, other pointer types like Rc<T> and Arc<T> were not
supported. If this is undesirable, librand can depend on liballoc and regain
these implementations.
* The WeightedChoice structure is no longer built with a `Vec<Weighted<T>>`,
but rather a `&mut [Weighted<T>]`. This means that the WeightedChoice
structure now has a lifetime associated with it.
* The `sample` method on `Rng` has been moved to a top-level function in the
`rand` module due to its dependence on `Vec`.
cc #13851
[breaking-change]
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes#12019
[breaking-change]
messages when the pattern is refutable.
This means the compiler points directly to the pattern and said that the
problem is the pattern being refutable (rather than just saying that
some value isn't covered in the `match` as it did previously).
Fixes#14390.
There's a fair number of attributes that have to be whitelisted since
they're either looked for by rustdoc, in trans, or as needed. These can
be cleaned up in the future.
All of these features have been obsolete since February 2014, where most have
been obsolete since 2013. There shouldn't be any more need to keep around the
parser hacks after this length of time.
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
Tweak region inference to ignore constraints like `'a <= 'static`, since they
have no value. This also ensures that we can handle some obscure cases of fn
subtyping with bound regions that we didn't used to handle correctly.
Fixes#13974.
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
This is an implementation of RFC 16. A module can now only be loaded if the
module declaring `mod name;` "owns" the current directory. A module is
considered as owning its directory if it meets one of the following criteria:
* It is the top-level crate file
* It is a `mod.rs` file
* It was loaded via `#[path]`
* It was loaded via `include!`
* The module was declared via an inline `mod foo { ... }` statement
For example, this directory structure is now invalid
// lib.rs
mod foo;
// foo.rs
mod bar;
// bar.rs;
fn bar() {}
With this change `foo.rs` must be renamed to `foo/mod.rs`, and `bar.rs` must be
renamed to `foo/bar.rs`. This makes it clear that `bar` is a submodule of `foo`,
and can only be accessed through `foo`.
RFC: 0016-module-file-system-hierarchy
Closes#14180
[breaking-change]
This commit is part of the libstd facade RFC, issue #13851. This creates a new
library, liballoc, which is intended to be the core allocation library for all
of Rust. It is pinned on the basic assumption that an allocation failure is an
abort or failure.
This module has inherited the heap/libc_heap modules from std::rt, the owned/rc
modules from std, and the arc module from libsync. These three pointers are
currently the three most core pointer implementations in Rust.
The UnsafeArc type in std::sync should be considered deprecated and replaced by
Arc<Unsafe<T>>. This commit does not currently migrate to this type, but future
commits will continue this refactoring.
This is an implementation of RFC 16. A module can now only be loaded if the
module declaring `mod name;` "owns" the current directory. A module is
considered as owning its directory if it meets one of the following criteria:
* It is the top-level crate file
* It is a `mod.rs` file
* It was loaded via `#[path]`
* It was loaded via `include!`
* The module was declared via an inline `mod foo { ... }` statement
For example, this directory structure is now invalid
// lib.rs
mod foo;
// foo.rs
mod bar;
// bar.rs;
fn bar() {}
With this change `foo.rs` must be renamed to `foo/mod.rs`, and `bar.rs` must be
renamed to `foo/bar.rs`. This makes it clear that `bar` is a submodule of `foo`,
and can only be accessed through `foo`.
RFC: 0016-module-file-system-hierarchy
Closes#14180
[breaking-change]
This plugs a leak where resolve was treating enums defined in parent modules as
in-scope for all children modules when resolving a pattern identifier. This
eliminates the code path in resolve entirely.
If this breaks any existing code, then it indicates that the variants need to be
explicitly imported into the module.
Closes#14221
[breaking-change]
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
(Only after adding the tests did I realize that this is not really a
special case at the AST level; as far as the visitor is concerned,
`int` and `i32` and `i64` are just idents.)
Namely: non-pub `use` declarations *are* significant to the SVH
computation, since they can change which traits are part of the method
resolution step, and thus affect which methods get called from the
(potentially inlined) code.
Provides better help for the resolve failures inside an `impl` if the name matches:
- a field on the self type
- a method on the self type
- a method on the current trait ref (in a trait impl)
Not handling trait method suggestions if in a regular `impl` (as you can see on line 69 of the test), I believe it is possible though.
Also, provides a better message when `self` fails to resolve due to being a static method.
It's using some unsafe pointers to skip copying the larger structures (which are only used in error conditions); it's likely possible to get it working with lifetimes (all the useful refs should outlive the visitor calls) but I haven't really figured that out for this case. (can switch to copying code if wanted)
Closes#2356.
* Added `// no-pretty-expanded` to pretty-print a test, but not run it through
the `expanded` variant.
* Removed #[deriving] and other expanded attributes after they are expanded
* Removed hacks around &str and &&str and friends (from both the parser and the
pretty printer).
* Un-ignored a bunch of tests
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
Printing <no-bounds> on trait objects comes from a time when trait
objects had a non-empty default bounds set. As they no longer have any
default bounds, printing <no-bounds> is just noise.
Printing <no-bounds> on trait objects comes from a time when trait
objects had a non-empty default bounds set. As they no longer have any
default bounds, printing <no-bounds> is just noise.
The code in resolve erroneously assumed that private enums weren't visited, so
the logic was adjusted to check to see if the enum definition itself was public.
Closes#11680
have no value. This also ensures that we can handle some obscure cases of fn
subtyping with bound regions that we didn't used to handle correctly.
Fixes#13974.
As part of #5527 I had to make some changes here and I just couldn't take it anymore. Refactor the writeback code. Should be functionally equivalent to the old stuff.
r? @pcwalton
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.set()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
This commit brings the local_data api up to modern rust standards with a few key
improvements:
* The `pop` and `set` methods have been combined into one method, `replace`
* The `get_mut` method has been removed. All interior mutability should be done
through `RefCell`.
* All functionality is now exposed as a method on the keys themselves. Instead
of importing std::local_data, you now use "key.replace()" and "key.get()".
* All closures have been removed in favor of RAII functionality. This means that
get() and get_mut() no long require closures, but rather return
Option<SmartPointer> where the smart pointer takes care of relinquishing the
borrow and also implements the necessary Deref traits
* The modify() function was removed to cut the local_data interface down to its
bare essentials (similarly to how RefCell removed set/get).
[breaking-change]
This is the second step in implementing #13851. This PR cannot currently land until a snapshot exists with #13892, but I imagine that this review will take longer.
This PR refactors a large amount of functionality outside of the standard library into a new library, libcore. This new library has 0 dependencies (in theory). In practice, this library currently depends on these symbols being available:
* `rust_begin_unwind` and `rust_fail_bounds_check` - These are the two entry points of failure in libcore. The symbols are provided by libstd currently. In the future (see the bullets on #13851) this will be officially supported with nice error mesages. Additionally, there will only be one failure entry point once `std::fmt` migrates to libcore.
* `memcpy` - This is often generated by LLVM. This is also quite trivial to implement for any platform, so I'm not too worried about this.
* `memcmp` - This is required for comparing strings. This function is quite common *everywhere*, so I don't feel to bad about relying on a consumer of libcore to define it.
* `malloc` and `free` - This is quite unfortunate, and is a temporary stopgap until we deal with the `~` situation. More details can be found in the module `core::should_not_exist`
* `fmod` and `fmodf` - These exist because the `Rem` trait is defined in libcore, so the `Rem` implementation for floats must also be defined in libcore. I imagine that any platform using floating-point modulus will have these symbols anyway, and otherwise they will be optimized out.
* `fdim` and `fdimf` - Like `fmod`, these are from the `Signed` trait being defined in libcore. I don't expect this to be much of a problem
These dependencies all "Just Work" for now because libcore only exists as an rlib, not as a dylib.
The commits themselves are organized to show that the overall diff of this extraction is not all that large. Most modules were able to be moved with very few modifications. The primary module left out of this iteration is `std::fmt`. I plan on migrating the `fmt` module to libcore, but I chose to not do so at this time because it had implications on the `Writer` trait that I wanted to deal with in isolation. There are a few breaking changes in these commits, but they are fairly minor, and are all labeled with `[breaking-change]`.
The nastiest parts of this movement come up with `~[T]` and `~str` being language-defined types today. I believe that much of this nastiness will get better over time as we migrate towards `Vec<T>` and `Str` (or whatever the types will be named). There will likely always be some extension traits, but the situation won't be as bad as it is today.
Known deficiencies:
* rustdoc will get worse in terms of readability. This is the next issue I will tackle as part of #13851. If others think that the rustdoc change should happen first, I can also table this to fix rustdoc first.
* The compiler reveals that all these types are reexports via error messages like `core::option::Option`. This is filed as #13065, and I believe that issue would have a higher priority now. I do not currently plan on fixing that as part of #13851. If others believe that this issue should be fixed, I can also place it on the roadmap for #13851.
I recommend viewing these changes on a commit-by-commit basis. The overall change is likely too overwhelming to take in.
Compile-fail tests for syntax extensions belong in this suite which has correct
dependencies on all artifacts rather than just the target artifacts.
Closes#13818
This change makes internal compile errors in the compile-fail tests failures.
I believe this is the correct behaviour- those tests are intended to assert that the compiler doesn't proceed, not that it explodes.
So far, it fails on 4 tests in my environment, my testcase for #13943 which is what caused me to tackle this, and 3 others:
```
failures:
[compile-fail] compile-fail/incompatible-tuple.rs # This one is mine and not on master
[compile-fail] compile-fail/inherit-struct8.rs
[compile-fail] compile-fail/issue-9725.rs
[compile-fail] compile-fail/unsupported-cast.rs
```
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
The code in resolve erroneously assumed that private enums weren't visited, so
the logic was adjusted to check to see if the enum definition itself was public.
Closes#11680
Some cases were not correctly handled by this lint, for instance `let a = 42u8; a < 0` and `let a = 42u8; a > 255`.
It led to the discovery of two useless comparisons, which I removed.
Closes#7575.
I don't think the change from a contains lookup to an iteration of the HashSet in the resolver should be much of a burden as the set of methods with the same name should be relatively small.
