rustbuild: Don't build target compilers in stage0
The `doc-book` and `doc-nomicon` steps accidentally depended on a rustbook
compiled by a cross-compiled compiler, which isn't necessary. Be sure to set the
`host` on these dependency edges to the build compiler to ensure that we're
always using a tool compiled for the host platform.
This was discovered trawling the build logs for the new dist bots and
discovering that they're building one too many compilers in stage0.
Allow projections to be promoted to constants in MIR.
This employs the `LvalueContext` additions by @pcwalton to properly extend the MIR promotion of temporaries to allow projections (field accesses, indexing and dereferences) on said temporaries.
It's needed both parity with the old constant qualification logic (for current borrowck) and it fixes#38074.
The former is *required for soundness* if we accept the RFC for promoting rvalues to `'static` constants.
That is, until we get MIR borrowck and the same source of truth will be used for both checks and codegen.
[11/n] Separate ty::Tables into one per each body.
_This is part of a series ([prev](https://github.com/rust-lang/rust/pull/38449) | [next]()) of patches designed to rework rustc into an out-of-order on-demand pipeline model for both better feature support (e.g. [MIR-based](https://github.com/solson/miri) early constant evaluation) and incremental execution of compiler passes (e.g. type-checking), with beneficial consequences to IDE support as well.
If any motivation is unclear, please ask for additional PR description clarifications or code comments._
<hr>
In order to track the results of type-checking and inference for incremental recompilation, they must be stored separately for each function or constant value, instead of lumped together.
These side-`Tables` also have to be tracked by various passes, as they visit through bodies (all of which have `Tables`, even if closures share the ones from their parent functions). This is usually done by switching a `tables` field in an override of `visit_nested_body` before recursing through `visit_body`, to the relevant one and then restoring it - however, in many cases the nesting is unnecessary and creating the visitor for each body in the crate and then visiting that body, would be a much cleaner solution.
To simplify handling of inlined HIR & its side-tables, their `NodeId` remapping and entries HIR map were fully stripped out, which means that `NodeId`s from inlined HIR must not be used where a local `NodeId` is expected. It might be possible to make the nodes (`Expr`, `Block`, `Pat`, etc.) that only show up within a `Body` have IDs that are scoped to that `Body`, which would also allow `Tables` to use `Vec`s.
That last part also fixes#38790 which was accidentally introduced in a previous refactor.
Remove not(stage0) from deny(warnings)
Historically this was done to accommodate bugs in lints, but there hasn't been a
bug in a lint since this feature was added which the warnings affected. Let's
completely purge warnings from all our stages by denying warnings in all stages.
This will also assist in tracking down `stage0` code to be removed whenever
we're updating the bootstrap compiler.
Make the suggestion list have a correct padding:
```
error[E0308]: mismatched types
--> file.rs:3:20
|
3 | let x: usize = "";
| ^^ expected usize, found reference
|
= note: expected type `usize`
= note: found type `&'static str`
= help: here are some functions which might fulfill your needs:
- .len()
- .foo()
- .bar()
```
compiletest: Fix flaky Android gdb test runs
Local testing showed that I was able to reproduce an error where debuginfo tests
on Android would fail with "connection reset by peer". Further investigation
turned out that the gdb tests are android with bit of process management:
* First an `adb forward` command is run to ensure that the host's port 5039 is
the same as the emulator's.
* Next an `adb shell` command is run to execute the `gdbserver` executable
inside the emulator. This gdb server will attach to port 5039 and listen for
remote gdb debugging sessions.
* Finally, we run `gdb` on the host (not in the emulator) and then connect to
this gdb server to send it commands.
The problem was happening when the host's gdb was failing to connect to the
remote gdbserver running inside the emulator. The previous test for this was
that after `adb shell` executed we'd sleep for a second and then attempt to make
a TCP connection to port 5039. If successful we'd run gdb and on failure we'd
sleep again.
It turns out, however, that as soon as we've executed `adb forward` all TCP
connections to 5039 will succeed. This means that we would only ever sleep for
at most one second, and if this wasn't enough time we'd just fail later because
we would assume that gdbserver had started but it may not have done so yet.
This commit fixes these issues by removing the TCP connection to test if
gdbserver is ready to go. Instead we read the stdout of the process and wait for
it to print that it's listening at which point we start running gdb. I've found
that locally at least I was unable to reproduce the failure after these changes.
Closes#38710
trans: Fix missing closure env drop-glue in trans-item collector.
FnOnce adapters automatically generated by the compiler introduce a call to drop the closure environment. The collector didn't pick up on that because this drop call does not show up in MIR. That could lead to an assertion being triggered if the drop-glue for the environment wasn't instantiated via something else.
Fixes#38810
cc @arielb1
r? @eddyb or @nikomatsakis
rustc: use -Xlinker when specifying an rpath with ',' in it
The `-Wl` option splits its parameters on commas, so if rustc specifies
`-Wl,-rpath,<path>` when `<path>` contains commas, the path gets split up
and the linker gets a partial path and spurious extra parameters.
Gcc/clang support the more verbose `-Xlinker` option to pass options to the linker directly, so use it for comma-containing paths.
Fixes issue #38795.
Reduce the size of static data in std_unicode::tables
`BoolTrie` works well for sets of code points spread out through most of Unicode’s range, but is uses a lot of space for sets with few, mostly low, code points.
This switches a few of its instances to a similar but simpler trie data structure.
CC @raphlinus, who wrote the original `BoolTrie`.
## Before
`size_of::<BoolTrie>()` is 1552, which is added to `table.r3.len() * 8 + t.r5.len() + t.r6.len() * 8`:
* `Cc_table`: 1632
* `White_Space_table`: 1656
* `Pattern_White_Space_table`: 1640
* Total: 4928 bytes
## After
`size_of::<SmallBoolTrie>()` is 32, which is added to `t.r1.len() + t.r2.len() * 8`:
* `Cc_table`: 51
* `White_Space_table`: 273
* `Pattern_White_Space_table`: 193
* Total: 517 bytes
## Difference
Every Rust program with `std` statically linked should be about 4 KB smaller.
Add PeekMut::pop
A fairly common workflow is to put a bunch of stuff into a binary heap
and then mutate the top value until its empty. This both makes that a
bit more convenient (no need to save a boolean off and pop after to
avoid borrowck issues), and a bit more efficient since you only shift
once.
r? @alexcrichton
cc @rust-lang/libs
Implement placement-in protocol for `Vec`
Follow-up of #32366 per comment at https://github.com/rust-lang/rust/issues/30172#issuecomment-268099009, updating to latest rust, leaving @apasel422 as author and putting myself as committer.
I've removed the implementation of `push` in terms of place to make this PR more conservative.
E0088/E0090 fix
This fixes an issue reported by @eddyb (https://github.com/rust-lang/rust/pull/36208#issuecomment-2707092230) where the check for "too few lifetime parameters" was removed in one of the error message PRs.
I also removed the span shrinking from E0088, as early bound lifetimes give you a confusing underline in some cases.
r=eddyb
This commit adds a new method to the `Child` type in the `std::process` module
called `try_wait`. This method is the same as `wait` except that it will not
block the calling thread and instead only attempt to collect the exit status. On
Unix this means that we call `waitpid` with the `WNOHANG` flag and on Windows it
just means that we pass a 0 timeout to `WaitForSingleObject`.
Currently it's possible to build this method out of tree, but it's unfortunately
tricky to do so. Specifically on Unix you essentially lose ownership of the pid
for the process once a call to `waitpid` has succeeded. Although `Child` tracks
this state internally to be resilient to multiple calls to `wait` or a `kill`
after a successful wait, if the child is waited on externally then the state
inside of `Child` is not updated. This means that external implementations of
this method must be extra careful to essentially not use a `Child`'s methods
after a call to `waitpid` has succeeded (even in a nonblocking fashion).
By adding this functionality to the standard library it should help canonicalize
these external implementations and ensure they can continue to robustly reuse
the `Child` type from the standard library without worrying about pid ownership.
std: Don't pass overlapped handles to processes
This commit fixes a mistake introduced in #31618 where overlapped handles were
leaked to child processes on Windows. On Windows once a handle is in overlapped
mode it should always have I/O executed with an instance of `OVERLAPPED`. Most
child processes, however, are not prepared to have their stdio handles in
overlapped mode as they don't use `OVERLAPPED` on reads/writes to the handle.
Now we haven't had any odd behavior in Rust up to this point, and the original
bug was introduced almost a year ago. I believe this is because it turns out
that if you *don't* pass an `OVERLAPPED` then the system will [supply one for
you][link]. In this case everything will go awry if you concurrently operate on
the handle. In Rust, however, the stdio handles are always locked, and there's
no way to not use them unlocked in libstd. Due to that change we've always had
synchronized access to these handles, which means that Rust programs typically
"just work".
Conversely, though, this commit fixes the test case included, which exhibits
behavior that other programs Rust spawns may attempt to execute. Namely, the
stdio handles may be concurrently used and having them in overlapped mode wreaks
havoc.
[link]: https://blogs.msdn.microsoft.com/oldnewthing/20121012-00/?p=6343Closes#38811
fix help for the --print option
Since 8285ab5c99, which was merged in with #38061, the help for the
--print option is missing the surrounding [ ] around the possible
options.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Local testing showed that I was able to reproduce an error where debuginfo tests
on Android would fail with "connection reset by peer". Further investigation
turned out that the gdb tests are android with bit of process management:
* First an `adb forward` command is run to ensure that the host's port 5039 is
the same as the emulator's.
* Next an `adb shell` command is run to execute the `gdbserver` executable
inside the emulator. This gdb server will attach to port 5039 and listen for
remote gdb debugging sessions.
* Finally, we run `gdb` on the host (not in the emulator) and then connect to
this gdb server to send it commands.
The problem was happening when the host's gdb was failing to connect to the
remote gdbserver running inside the emulator. The previous test for this was
that after `adb shell` executed we'd sleep for a second and then attempt to make
a TCP connection to port 5039. If successful we'd run gdb and on failure we'd
sleep again.
It turns out, however, that as soon as we've executed `adb forward` all TCP
connections to 5039 will succeed. This means that we would only ever sleep for
at most one second, and if this wasn't enough time we'd just fail later because
we would assume that gdbserver had started but it may not have done so yet.
This commit fixes these issues by removing the TCP connection to test if
gdbserver is ready to go. Instead we read the stdout of the process and wait for
it to print that it's listening at which point we start running gdb. I've found
that locally at least I was unable to reproduce the failure after these changes.
Closes#38710
Deprecate TcpListener::set_only_v6
This was supposed to have been removed in #33124 but snuck through :(
Should the docs be removed?
I left the accessor undeprecated since it should actually work, though that method doesn't exist on other networking types.
r? @alexcrichton
cc @rust-lang/libs
fix promotion of MIR terminators
promotion of MIR terminators used to try to promote the destination it
is trying to promote, leading to stack overflow.
Also clean up the code in `promote_temp` a bit to make it more understandable.
Fixes#37991.
cc @nikomatsakis
r? @eddyb
It looks like in practice at least this test will not pass on Windows.
Empirically it is prone to blocking forever, presumably because a call to
`shutdown` doesn't actually wake up other threads on Windows.
We don't document this as a guarantee for `shutdown`, nor do we internally rely
on it. This test originated in a time long since passed when it was leveraged
for canceling I/O, but nowadays there's nothing fancy happening in the standard
library so it's not really a productive test anyway, hence just ignoring it on
Windows.
Closes#31657
