* Streams are now ~3x faster than before (fewer allocations and more optimized)
* Based on a single-producer single-consumer lock-free queue that doesn't
always have to allocate on every send.
* Blocking via mutexes/cond vars outside the runtime
* Streams work in/out of the runtime seamlessly
* Select now works in/out of the runtime seamlessly
* Streams will now fail!() on send() if the other end has hung up
* try_send() will not fail
* PortOne/ChanOne removed
* SharedPort removed
* MegaPipe removed
* Generic select removed (only one kind of port now)
* API redesign
* try_recv == never block
* recv_opt == block, don't fail
* iter() == Iterator<T> for Port<T>
* removed peek
* Type::new
* Removed rt::comm
In order to keep up to date with changes to the libraries that `llvm-config`
spits out, the dependencies to the LLVM are a dynamically generated rust file.
This file is now automatically updated whenever LLVM is updated to get kept
up-to-date.
At the same time, this cleans out some old cruft which isn't necessary in the
makefiles in terms of dependencies.
Closes#10745Closes#10744
Right now, as pointed out in #8132, it is very easy to introduce a subtle race
in the runtime. I believe that this is the cause of the current flakiness on the
bots.
I have taken the last idea mentioned in that issue which is to use a lock around
descheduling and context switching in order to solve this race.
Closes#8132
The reasons for doing this are:
* The model on which linked failure is based is inherently complex
* The implementation is also very complex, and there are few remaining who
fully understand the implementation
* There are existing race conditions in the core context switching function of
the scheduler, and possibly others.
* It's unclear whether this model of linked failure maps well to a 1:1 threading
model
Linked failure is often a desired aspect of tasks, but we would like to take a
much more conservative approach in re-implementing linked failure if at all.
Closes#8674Closes#8318Closes#8863
These two attributes are no longer useful now that Rust has decided to leave
segmented stacks behind. It is assumed that the rust task's stack is always
large enough to make an FFI call (due to the stack being very large).
There's always the case of stack overflow, however, to consider. This does not
change the behavior of stack overflow in Rust. This is still normally triggered
by the __morestack function and aborts the whole process.
C stack overflow will continue to corrupt the stack, however (as it did before
this commit as well). The future improvement of a guard page at the end of every
rust stack is still unimplemented and is intended to be the mechanism through
which we attempt to detect C stack overflow.
Closes#8822Closes#10155
Now that the type_id intrinsic is working across crates, all of these
unnecessary messages can be removed to have the failure type for a task truly be
~Any and only ~Any
- `begin_unwind` is now generic over any `T: Any + Send`.
- Every value you fail with gets boxed as an `~Any`.
- Because of implementation details, `&'static str` and `~str` are still
handled specially behind the scenes.
- Changed the big macro source string in libsyntax to a raw string
literal, and enabled doc comments there.
Some code cleanup, sorting of import blocks
Removed std::unstable::UnsafeArc's use of Either
Added run-fail tests for the new FailWithCause impls
Changed future_result and try to return Result<(), ~Any>.
- Internally, there is an enum of possible fail messages passend around.
- In case of linked failure or a string message, the ~Any gets
lazyly allocated in future_results recv method.
- For that, future result now returns a wrapper around a Port.
- Moved and renamed task::TaskResult into rt::task::UnwindResult
and made it an internal enum.
- Introduced a replacement typedef `type TaskResult = Result<(), ~Any>`.
Almost all languages provide some form of buffering of the stdout stream, and
this commit adds this feature for rust. A handle to stdout is lazily initialized
in the Task structure as a buffered owned Writer trait object. The buffer
behavior depends on where stdout is directed to. Like C, this line-buffers the
stream when the output goes to a terminal (flushes on newlines), and also like C
this uses a fixed-size buffer when output is not directed at a terminal.
We may decide the fixed-size buffering is overkill, but it certainly does reduce
write syscall counts when piping output elsewhere. This is a *huge* benefit to
any code using logging macros or the printing macros. Formatting emits calls to
`write` very frequently, and to have each of them backed by a write syscall was
very expensive.
In a local benchmark of printing 10000 lines of "what" to stdout, I got the
following timings:
when | terminal | redirected
----------|---------------|--------
before | 0.575s | 0.525s
after | 0.197s | 0.013s
C | 0.019s | 0.004s
I can also confirm that we're buffering the output appropriately in both
situtations. We're still far slower than C, but I believe much of that has to do
with the "homing" that all tasks due, we're still performing an order of
magnitude more write syscalls than C does.
Almost all languages provide some form of buffering of the stdout stream, and
this commit adds this feature for rust. A handle to stdout is lazily initialized
in the Task structure as a buffered owned Writer trait object. The buffer
behavior depends on where stdout is directed to. Like C, this line-buffers the
stream when the output goes to a terminal (flushes on newlines), and also like C
this uses a fixed-size buffer when output is not directed at a terminal.
We may decide the fixed-size buffering is overkill, but it certainly does reduce
write syscall counts when piping output elsewhere. This is a *huge* benefit to
any code using logging macros or the printing macros. Formatting emits calls to
`write` very frequently, and to have each of them backed by a write syscall was
very expensive.
In a local benchmark of printing 10000 lines of "what" to stdout, I got the
following timings:
when | terminal | redirected
----------------------------------
before | 0.575s | 0.525s
after | 0.197s | 0.013s
C | 0.019s | 0.004s
I can also confirm that we're buffering the output appropriately in both
situtations. We're still far slower than C, but I believe much of that has to do
with the "homing" that all tasks due, we're still performing an order of
magnitude more write syscalls than C does.
It's not guaranteed that there will always be an event loop to run, and this
implementation will serve as an incredibly basic one which does not provide any
I/O, but allows the scheduler to still run.
cc #9128
The isn't an ideal patch, and the comment why is in the code. Basically uvio
uses task::unkillable which touches the kill flag for a task, and if the task is
failing due to mismangement of the kill flag, then there will be serious
problems when the task tries to print that it's failing.
When uv's TTY I/O is used for the stdio streams, the file descriptors are put
into a non-blocking mode. This means that other concurrent writes to the same
stream can fail with EAGAIN or EWOULDBLOCK. By all I/O to event-loop I/O, we
avoid this error.
There is one location which cannot move, which is the runtime's dumb_println
function. This was implemented to handle the EAGAIN and EWOULDBLOCK errors and
simply retry again and again.
This commit re-introduces the functionality of __morestack in a way that it was
not originally anticipated. Rust does not currently have segmented stacks,
rather just large stack segments. We do not detect when these stack segments are
overrun currently, but this commit leverages __morestack in order to check this.
This commit purges a lot of the old __morestack and stack limit C++
functionality, migrating the necessary chunks to rust. The stack limit is now
entirely maintained in rust, and the "main logic bits" of __morestack are now
also implemented in rust as well.
I put my best effort into validating that this currently builds and runs successfully on osx and linux 32/64 bit, but I was unable to get this working on windows. We never did have unwinding through __morestack frames, and although I tried poking at it for a bit, I was unable to understand why we don't get unwinding right now.
A focus of this commit is to implement as much of the logic in rust as possible. This involved some liberal usage of `no_split_stack` in various locations, along with some use of the `asm!` macro (scary). I modified a bit of C++ to stop calling `record_sp_limit` because this is no longer defined in C++, rather in rust.
Another consequence of this commit is that `thread_local_storage::{get, set}` must both be flagged with `#[rust_stack]`. I've briefly looked at the implementations on osx/linux/windows to ensure that they're pretty small stacks, and I'm pretty sure that they're definitely less than 20K stacks, so we probably don't have a lot to worry about.
Other things worthy of note:
* The default stack size is now 4MB instead of 2MB. This is so that when we request 2MB to call a C function you don't immediately overflow because you have consumed any stack at all.
* `asm!` is actually pretty cool, maybe we could actually define context switching with it?
* I wanted to add links to the internet about all this jazz of storing information in TLS, but I was only able to find a link for the windows implementation. Otherwise my suggestion is just "disassemble on that arch and see what happens"
* I put my best effort forward on arm/mips to tweak __morestack correctly, we have no ability to test this so an extra set of eyes would be useful on these spots.
* This is all really tricky stuff, so I tried to put as many comments as I thought were necessary, but if anything is still unclear (or I completely forgot to take something into account), I'm willing to write more!
This commit resumes management of the stack boundaries and limits when switching
between tasks. This additionally leverages the __morestack function to run code
on "stack overflow". The current behavior is to abort the process, but this is
probably not the best behavior in the long term (for deails, see the comment I
wrote up in the stack exhaustion routine).
This is 2x faster on 64-bit computers at generating anything larger
than 32-bits.
It has been verified against the canonical C implementation from the
website of the creator of ISAAC64.
Also, move `Rng.next` to `Rng.next_u32` and add `Rng.next_u64` to
take full advantage of the wider word width; otherwise Isaac64 will
always be squeezed down into a u32 wasting half the entropy and
offering no advantage over the 32-bit variant.
This moves all local_data stuff into the `local_data` module and only that
module alone. It also removes a fair amount of "super-unsafe" code in favor of
just vanilla code generated by the compiler at the same time.
Closes#8113
This removes the stacking of type parameters that occurs when invoking
trait methods, and fixes all places in the standard library that were
relying on it. It is somewhat awkward in places; I think we'll probably
want something like the `Foo::<for T>::new()` syntax.
Instead of a furious storm of idle callbacks we just have one. This is a major performance gain - around 40% on my machine for the ping pong bench.
Also in this PR is a cleanup commit for the scheduler code. Was previously up as a separate PR, but bors load + imminent merge hell led me to roll them together. Was #8549.