Extend the `DepthFirstSearch` iterator so that it can be re-used and
extended with add'l start nodes. Then replace the FxHashSets of nodes
we were using in the fallback analysis with a single iterator. This
way we won't re-walk portions of the graph that are reached more than
once, and we also do less allocation etc.
Instead, we now record those type variables that are the target of a
`NeverToAny` adjustment and consider those to be the "diverging" type
variables. This allows us to remove the special case logic that
creates a type variable for `!` in coercion.
The comment seems incorrect. Testing revealed that the examples in
question still work (as well as some variants) even without the
special casing here.
We now fallback type variables using the following rules:
* Construct a coercion graph `A -> B` where `A` and `B` are unresolved
type variables or the `!` type.
* Let D be those variables that are reachable from `!`.
* Let N be those variables that are reachable from a variable not in
D.
* All variables in (D \ N) fallback to `!`.
* All variables in (D & N) fallback to `()`.
Remove concept of 'completion' from the projection cache
Fixes#88910
When we initially store a `NormalizedTy` in the projection cache,
we discard all obligations that we can (while ensuring that we
don't cause any issues with incremental compilation).
Marking a projection cache entry as 'completed' discards all
obligations associated with it. This can only cause problems,
since any obligations stored in the cache are there for a reason
(e.g. they evaluate to `EvaluatedToOkModuloRegions`).
This commit removes `complete` and `complete_normalized` entirely.
Set the library path in sysroot-crates-are-unstable
Most of the `run-make-fulldeps` tests use a make-driven rustc command
that includes `HOST_RPATH_DIR` in the library path, but this particular
test runs from python instead. When the toolchain is built without
`rpath` enabled, we need that library path in the environment so it can
find its own libraries.
PassWrapper: handle separate Module*SanitizerPass
Change ab41eef9aca3 in LLVM split MemorySanitizerPass into
MemorySanitizerPass for functions and ModuleMemorySanitizerPass for
modules. There's a related change for ThreadSanitizerPass, and in here
since we're using a ModulePassManager I only add the module flavor of
the pass on LLVM 14.
r? `@nikic` cc `@nagisa`
Improve error message for type mismatch in generator arguments
Fixes#88653. The code example given there is invalid because the `Generator` trait (unlike the `Fn` traits) does not take the generator arguments in tupled-up form (because there can only be one argument, from my understanding). Hence, the type error in the example in #88653 is correct, because the given generator takes a `bool` argument, whereas the function's return type talks about a generator with a `(bool,)` argument.
The error message is both confusing and wrong, though: It is wrong because it displays the wrong "expected signature", and it is confusing because both the "expected" and "found" notes point at the same span. With my changes, I get the following, more helpful output:
```
error[E0631]: type mismatch in generator arguments
--> test.rs:5:22
|
5 | fn foo(bar: bool) -> impl Generator<(bool,)> {
| ^^^^^^^^^^^^^^^^^^^^^^^ expected signature of `fn((bool,)) -> _`
6 | |bar| {
| ----- found signature of `fn(bool) -> _`
```
Couple of changes to FileSearch and SearchPath
* Turn a couple of regular comments into doc comments
* Move `get_tools_search_paths` from `FileSearch` to `Session`
* Use Lrc instead of Option to avoid duplication of a `SearchPath`
Don't lint about missing code examples in derived traits
When the `missing_doc_code_examples` lint is performed it also requires that derived Trait implementations have a code example for each member etc., which causes undesirable behavior.
# Examples
With `missing_doc_code_examples` enable we are not able to use the `Clone` derive macro due to the generated code not being documented:
```rust
#[deny(rustdoc::missing_doc_code_examples)]
/// docs
/// ```
/// let s = SomeStruct;
/// ```
#[derive(Clone)]
pub struct SomeStruct;
```
yields:
```
Documenting testt v0.1.0 (<redacted>)
error: missing code example in this documentation
--> src/lib.rs:7:10
|
7 | #[derive(Clone)]
| ^^^^^
|
note: the lint level is defined here
--> src/lib.rs:1:8
|
1 | #[deny(rustdoc::missing_doc_code_examples)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
error: missing code example in this documentation
--> src/lib.rs:7:10
|
7 | #[derive(Clone)]
| ^^^^^
error: could not document `testt`
Caused by:
process didn't exit successfully: `rustdoc ...
```
closes#81775
Add TcpListener::into_incoming and IntoIncoming
The `incoming` method is really useful, however for some use cases the borrow
this introduces is needlessly restricting. Thus, an owned variant is added.
r? ``@joshtriplett``
Fix ICE in `improper_ctypes_definitions` lint with all-ZST transparent types
Fixes#87496. There is also another function in the same file that looks fishy, but I haven't been able to produce an ICE there, and in any case, it's not related to #87496:
fd853c00e2/compiler/rustc_lint/src/types.rs (L720-L734)
r? ```@JohnTitor```
Make diagnostics clearer for `?` operators
Re-submission of #75029, fixes#71309
This also revives the `content` methods removed by #83185.
r? `@estebank`
Introduce a fast path that avoids the `debug_tuple` abstraction when deriving Debug for unit-like enum variants.
The intent here is to allow LLVM to remove the switch entirely in favor of an
indexed load from a table of constant strings, which is likely what the
programmer would write in C. Unfortunately, LLVM currently doesn't perform this
optimization due to a bug, but there is [a
patch](https://reviews.llvm.org/D109565) that fixes this issue. I've verified
that, with that patch applied on top of this commit, Debug for unit-like tuple
variants becomes a load, reducing the O(n) code bloat to O(1).
Note that inlining `DebugTuple::finish()` wasn't enough to allow LLVM to
optimize the code properly; I had to avoid the abstraction entirely. Not using
the abstraction is likely better for compile time anyway.
Part of #88793.
r? `@oli-obk`
Most of the `run-make-fulldeps` tests use a make-driven rustc command
that includes `HOST_RPATH_DIR` in the library path, but this particular
test runs from python instead. When the toolchain is built without
`rpath` enabled, we need that library path in the environment so it can
find its own libraries.
Point at argument instead of call for their obligations
When an obligation is introduced by a specific `fn` argument, point at
the argument instead of the `fn` call if the obligation fails to be
fulfilled.
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
When giving an error about an obligation introduced by a function call
that an argument doesn't fulfill, and that argument is a block, add a
span_label pointing at the innermost tail expression.
Current output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:31
|
2 | let p = Some(45).and_then({
| ______________________--------_^
| | |
| | required by a bound introduced by this call
3 | | |x| println!("doubling {}", x);
4 | | Some(x * 2)
| | -----------
5 | | });
| |_____^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Previous output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:22
|
2 | let p = Some(45).and_then({
| ^^^^^^^^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Partially address #27300. Will require rebasing on top of #88546.
Rollup of 10 pull requests
Successful merges:
- #88292 (Enable --generate-link-to-definition for rustc's docs)
- #88729 (Recover from `Foo(a: 1, b: 2)`)
- #88875 (cleanup(rustc_trait_selection): remove vestigial code from rustc_on_unimplemented)
- #88892 (Move object safety suggestions to the end of the error)
- #88928 (Document the closure arguments for `reduce`.)
- #88976 (Clean up and add doc comments for CStr)
- #88983 (Allow calling `get_body_with_borrowck_facts` without `-Z polonius`)
- #88985 (Update clobber_abi list to include k[1-7] regs)
- #88986 (Update the backtrace crate)
- #89009 (Fix typo in `break` docs)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Allow calling `get_body_with_borrowck_facts` without `-Z polonius`
For my [static analysis tool](https://github.com/willcrichton/flowistry), I need to access the set of outlives-constraints. Recently, #86977 merged a way to access these facts via Polonius. However, the merged implementation requires `-Z polonius` to be provided to use this feature. This uses Polonius for borrow checking on the entire crate, which as described [here](https://rust-lang.zulipchat.com/#narrow/stream/186049-t-compiler.2Fwg-polonius/topic/Polonius.20performance.20in.20a.20rustc.20plugin/near/251301631), is very slow.
This PR allows `get_body_with_borrowck_facts` to be called without `-Z polonius`. This is essential for my tool to run in a sensible length of time. This is a temporary patch as the Polonius-related APIs develop -- I can update my code as future changes happen.
Additionally, this PR also makes public two APIs that were previously public but then became private after `rustc_mir` got broken up: `rustc_mir_dataflow::framework::graphviz` and `rustc_mir_transform::MirPass`. I need both of these for my analysis tool. (I can break this change into a separate PR if necessary.)
cleanup(rustc_trait_selection): remove vestigial code from rustc_on_unimplemented
This isn't allowed by the validator, and seems to be unused.
When it was added in ed10a3faae,
it was used on `Sized`, and that usage is gone.
Recover from `Foo(a: 1, b: 2)`
Detect likely `struct` literal using parentheses as delimiters and emit
targeted suggestion instead of type ascription parse error.
Fix#61326.
Disable RemoveZsts in generators to avoid query cycles
Querying layout of a generator requires its optimized MIR. Thus
computing layout during MIR optimization of a generator might create a
query cycle. Disable RemoveZsts in generators to avoid the issue
(similar approach is used in ConstProp transform already).
Fixes#88972.
Change ab41eef9aca3 in LLVM split MemorySanitizerPass into
MemorySanitizerPass for functions and ModuleMemorySanitizerPass for
modules. There's a related change for ThreadSanitizerPass, and in here
since we're using a ModulePassManager I only add the module flavor of
the pass on LLVM 14.
r? @nikic cc @nagisa
When evaluating an `ExprKind::Call`, we first have to `check_expr` on it's
callee. When this one is a `ExprKind::Path`, we had to evaluate the bounds
introduced for its arguments, but by the time we evaluated them we no
longer had access to the argument spans. Now we special case this so
that we can point at the right place on unsatisfied bounds. This also
allows the E0277 deduplication to kick in correctly, so we now emit
fewer errors.
When giving an error about an obligation introduced by a function call
that an argument doesn't fulfill, and that argument is a block, add a
span_label pointing at the innermost tail expression.
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
