feat: Implement `feature(exhaustive_patterns)` from unstable Rust
Closes#12753
Recognize Rust's unstable `#![feature(exhaustive_patterns)]` (RFC 1872). Allow omitting visibly uninhabited variants from `match` expressions when the feature is on.
This adjusts match checking to the current implementation of the postponed RFC 1872 in rustc.
fix: Parse TypePathFn with preceding `::`
e.g. `impl Fn::() -> ()`.
Fixes#13157. This was the problem, not that the path was not at the end.
I could unify the parsing of `::` of TypePathFn with that of generic arg list, but some code relies on the `::` of generic arg list to be inside it.
fix: Lower float literals with underscores
Fixes#13155 (the problem was the `PI` is defined with `_f64` suffix). `PI` is still truncated, though, because `f64` cannot represent the value with full precision.
Highlight namerefs by syntax until proc-macros have been loaded
Usually when loading up a project, once loading is done we start answering highlight requests while proc-macros haven't always been loaded yet, so we start out with showing a lot of unresolved name-refs. After this PR, we'll use syntax based highlighting for those unresolved namerefs until the proc-macros have been loaded.
Remove hir::Expr::MacroStmts
This hir expression isn't needed and only existed as it was simpler to
deal with at first as it gave us a direct mapping for the ast version of
the same construct. This PR removes it, properly handling the statements
that are introduced by macro call expressions.
This hir expression isn't needed and only existed as it was simpler to
deal with at first as it gave us a direct mapping for the ast version of
the same construct. This PR removes it, properly handling the statements
that are introduced by macro call expressions.
feature: Assist to turn match into matches! invocation
Resolves#12510
This PR adds an assist, which convert 2-arm match that evaluates to a boolean into the equivalent matches! invocation.
fix: Only move comments when extracting a struct from an enum variant
Motivating example:
```rs
#[derive(Debug, thiserror::Error)]
enum Error {
/// Some explanation for this error
#[error("message")]
$0Woops {
code: u32
}
}
```
now becomes
```rs
/// Some explanation for this error
#[derive(Debug, thiserror::Error)]
struct Woops{
code: u32
}
#[derive(Debug, thiserror::Error)]
enum Error {
#[error("message")]
Woops(Woops)
}
```
(the `thiserror::Error` derive being copied and the struct formatting aren't ideal, though those are issues for another day)
fix: sort and deduplicate auto traits in trait object types
Fixes#12739
Chalk solver doesn't sort and deduplicate auto traits in trait object types, so we need to handle them ourselves in the lowering phase, just like [`rustc`](880416180b/compiler/rustc_typeck/src/astconv/mod.rs (L1487-L1488)) and [`chalk-integration`](https://github.com/rust-lang/chalk/blob/master/chalk-integration/src/lowering.rs#L575) do.
Quoting from [the Chalk book](https://rust-lang.github.io/chalk/book/types/rust_types.html#dyn-types):
> Note that -- for this purpose -- ordering of bounds is significant. That means that if you create a `dyn Foo + Send` and a `dyn Send + Foo`, chalk would consider them distinct types. The assumption is that bounds are ordered in some canonical fashion somewhere else.
Also, trait object types with more than one non-auto traits were previously allowed, but are now disallowed with this patch.
Use correct type in "Replace turbofish with type"
And support `?` and `.await` expressions.
Fixes#13148.
The assist can still show up even if the turbofish's type is not used at all, e.g.:
```rust
fn foo<T>() {}
let v = foo::<i32>();
```
I implemented that by checking the expressions' type.
This could probably be implemented better by taking the function's return type and substituting the generic parameter with the provided turbofish, but this is more complicated.
feat: Add a "Unmerge match arm" assist to split or-patterns inside match expressions
Fixes#13072.
The way I implemented it it leaves the `OrPat` in place even if there is only one pattern now but I don't think something will break because of that, and when more code will be typed we'll parse it again anyway. Removing it (but keeping the child pattern) is hard, I don't know how to do that.
Move empty diagnostics workaround back into the server
This only touches on the diagnostics in one place instead of multiple as was previously done, since all published diagnostics will go through this code path anyways.
Closes https://github.com/rust-lang/rust-analyzer/issues/13130
Make use of NoHash hashing for FileId and CrateId
Both of these are mere integers so there is nothing to hash here.
Ideally we would use this for `la_arena::Idx` too, but that doesn't work due to the orphan rule, and `la_arena` is unfortunately a public library so we can't really do much here... Unless we remove the trait restriction but I'd like not to
internal: Re-export standard semantic token types and mods
Should help in preventing future occurences of #13099 by having all token types and mods come through the same place
Add some more highlighting configurations
The following can be enabled/disabled now in terms of highlighting:
- doc comment injection (enabled by default)
- punctuation highlighting (disabled by default)
- operator highlighting (enabled by default)
- punctuation specialized highlighting (disabled by default)
- operator specialized highlighting (disabled by default)
- macro call bang highlighting (disabled by default)
This PR also changes our `attribute` semantic token type to the `decorator` type which landed upstream (but not yet in lsp-types).
Specialized highlighting is disabled by default, as all clients will have to ship something to map these back to the standard punctuation/operator token (we do this in VSCode via the inheritance mapping for example). This is a lot of maintenance work, and not something every client wants to do, pushing that need to use the user. As this is a rather niche use in the first place this will just be disabled by default.
Punctuation highlighting is disabled by default, punctuation is usually something that can be done by the native syntactic highlighting of the client, so there is no loss in quality. The main reason for this though is that punctuation adds a lot of extra token data that we sent over, a lot of clients struggle with applying this, so disabling this improves the UX for a lot of people. Note that we still highlight punctuations with special meaning as that special entity, (the never type `!` will still be tagged as a builtin type if it occurs as such)
Separate highlighting of the macro call bang `!` is disabled by default, as I think people actually didn't like that change that much, though at the same time I feel like not many people even noticed that change (I prefer it be separate, but that's not enough reason for it to be enabled by default I believe :^) )
cc https://github.com/rust-lang/rust-analyzer/issues/12783https://github.com/rust-lang/rust-analyzer/issues/13066
fix: Fix panics on GATs involving const generics
This workaround avoids constant crashing of rust analyzer when using GATs with const generics,
even when the const generics are only on the `impl` block.
The workaround treats GATs as non-existing if either itself or the parent has const generics and
removes relevant panicking code-paths.
Fixes#11989, fixes#12193
feat: Generate static method using Self::assoc() syntax
This change improves the `generate_function` assist to support generating static methods/associated functions using the `Self::assoc()` syntax. Previously, one could generate a static method, but only when specifying the type name directly (like `Foo::assoc()`). After this change, `Self` is supported as well as the type name.
Fixes#13012
feat: Add an assist for inlining all type alias uses
## Description
`inline_type_alias_uses` assist tries to inline all selected type alias occurrences.
### Currently
Type alias used in `PathType` position are inlined.
### Not supported
- Removing type alias declaration if all uses are inlined.
- Removing redundant imports after inlining all uses in the file.
- Type alias not in `PathType` position, such as:
- `A::new()`
- `let x = A {}`
- `let bits = A::BITS`
- etc.
## Demonstration
## Related Issues
Partially fixes#10881
feat: Run test mod from anywhere in parent file
The "Run" feature of rust-analyzer is super useful, especially for running
individual tests or test-modules during development.
One common pattern in rust development is to develop tests in the same file as
production code, inside a module (usually called `test` or `tests`) marked with
`#[cfg(test)]`. Unforunately, this pattern is not well supported by r-a today,
as a test module won't show up as a runnable unless the cursor is inside it.
In my experience, it is quite common to want to run the tests associated with
some production code immediately after editing it, not only after editing the
tests themselves. As such it would be better if test modules were available
from the "Run" menu even when the cursor is outside the test module.
This change updates the filtration logic for runnables in
`handlers::handle_runnables` to special case `RunnableKind::TestMod`, making
test modules available regardless of the cursor location. Other `RunnableKind`s
are unnaffected.
Fixes#9589
fix: resolve associated types of bare dyn types
Fixes#13031
We've been dropping the associated type bindings of trait object types that were written without the `dyn` keyword. This patch reuses the lowering logic for `TypeRef::DynTrait` so the associated type bindings are properly lowered.
The "Run" feature of rust-analyzer is super useful, especially for running
individual tests or test-modules during development.
One common pattern in rust development is to develop tests in the same file as
production code, inside a module (usually called `test` or `tests`) marked with
`#[cfg(test)]`. Unforunately, this pattern is not well supported by r-a today,
as a test module won't show up as a runnable unless the cursor is inside it.
In my experience, it is quite common to want to run the tests associated with
some production code immediately after editing it, not only after editing the
tests themselves. As such it would be better if test modules were available
from the "Run" menu even when the cursor is outside the test module.
This change updates the filtration logic for runnables in
`handlers::handle_runnables` to special case `RunnableKind::TestMod`, making
test modules available regardless of the cursor location. Other `RunnableKind`s
are unnaffected.
Fixes#9589
fix: a bunch of typos
This PR will fix some typos detected by [typos].
There are also some other typos in the function names, variable names, and file
names, which I leave as they are. I'm more certain that typos in comments
should be fixed.
[typos]: https://github.com/crate-ci/typos
This PR will fix some typos detected by [typos].
There are also some other typos in the function names, variable names, and file
names, which I leave as they are. I'm more certain that typos in comments
should be fixed.
[typos]: https://github.com/crate-ci/typos
fix: escape keywords used as names in earlier editions
Fixes#13030
There are keywords in Rust 2018+ that you can use as names without escaping when your crate is in Rust 2015 e.g. "try". We need to be consistent on how to keep track of the names regardless of how they are actually written in each crate. This patch attempts at it by taking such names into account and storing them uniformly in their escaped form.
This change improves the `generate_function` assist to support generating static methods/associated functions using the `Self::assoc()` syntax. Previously, one could generate a static method, but only when specifying the type name directly (like `Foo::assoc()`). After this change, `Self` is supported as well as the type name.
Fixes#13012
This workaround avoids constant crashing of rust analyzer when using GATs with const generics,
even when the const generics are only on the `impl` block.
The workaround treats GATs as non-existing if either itself or the parent has const generics and
removes relevant panicking code-paths.
fix: Fix incorrect type mismatch with `cfg_if!` and other macros in expression position
Fixes https://github.com/rust-lang/rust-analyzer/issues/12940
This is a bit of a hack, ideally `MacroStmts` would not exist at all after HIR lowering, but that requires changing how the lowering code works.
rust-analyzer's RUSTC_WRAPPER unconditionally succeeds `cargo check`
invocations tripping up build scripts using `cargo check` to probe for
successful compilations. To prevent this from happening the RUSTC_WRAPPER
now checks if it's run from a build script by looking for the
`CARGO_CFG_TARGET_ARCH` env var that cargo sets only when running build
scripts.
Make `Name` hold escaped name
Resolves#12787Resolvesrust-lang/rust#99361
This PR effectively swaps `Name` and `EscapedName` in hir. In other words, it makes `Name` hold and print escaped raw identifiers and introduces another struct `UnescapedName` for cases where you need to print names without "r#" prefix.
My rationale is that it makes it easier for us to format an escaped name into string, which is what we want when we serialize names in general. This is because we format a name into string usually when we are presenting it to the users and arguably they expect its escaped form as that's what they see and write in the source code.
I split the change for `Name` into 3 commits to make it easier to follow but it also made some tests fail in the intermediate commits. I can squash them into a commit after the review if desired. I've also made similar changes for `ModPath` and `EscapedModPath` as it makes them consistent with `Name`.
For reference, there was a brief discussion on this in [a zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/185405-t-compiler.2Frust-analyzer/topic/escaping.20.60Name.60s).
internal: Remove incomplete 1.64 ABI
This no longer works for current nightlies and should not be needed any more, since we can use the toolchain's proc macro server instead.
Parse range patterns in struct and slice without trailing comma
Resolves#12935
This patch includes the support for range patterns in slices, which is unstable (tracked in https://github.com/rust-lang/rust/issues/67264). If it's not desired I can remove it.
Add fixups for incomplete in proc-macros
Partially implements https://github.com/rust-lang/rust-analyzer/issues/12777.
Added support for for loops and match statements.
I couldn't do paths like `crate::foo::` as I wasn't able to add `SyntheticTokens` to the end of `foo::`, they always ended up after `crate::`
This is my first contribution so please don't be shy about letting me know if I've done anything wrong!
fix: make `concat!` work with char
Fixes#12921
- I avoided making `unquote_str()` take char literals as well because it's depended on by another function `parse_string()` that's only supposed to take strings.
- Even with this patch, we don't output `\0` as `\u{0}` which #12921 pointed out ~~, but we're not actually responsible for serializing it but rowan is~~. They are functionally equivalent and I don't think it'd cause any confusion, but we *could* try escaping them before serialization (for reference, `rustc -Zunpretty=expanded`, which `cargo expand` uses under the hood, [makes use of `str::escape_default()`](3830ecaa8d/compiler/rustc_ast/src/util/literal.rs (L161)).
More methods and traits for `la_arena::ArenaMap`
Continue of #12931. Seems that I forgot some methods in the previous PR :(
I also changed `ArenaMap::insert` to return the old value, to match the map-like collection API of std. **So this is a breaking change.**
r? `@lnicola`
Don't switch workspace on vfs file changes from libraries
When r-a starts up, it starts switching the workspace before all vfs
events have been processed which causes us to switch workspace multiple
times until all vfs changes have been processed. This scales with the
size of the project and its dependencies. If workspace files from
dependencies as well as the sysroot get loaded, we shouldn't switch
the workspace as those have no impact on the project workspace.
