Add documentation to more `From::from` implementations.
For users looking at documentation through IDE popups, this gives them relevant information rather than the generic trait documentation wording “Performs the conversion”. For users reading the documentation for a specific type for any reason, this informs them when the conversion may allocate or copy significant memory versus when it is always a move or cheap copy.
Notes on specific cases:
* The new documentation for `From<T> for T` explains that it is not a conversion at all.
* Also documented `impl<T, U> Into<U> for T where U: From<T>`, the other central blanket implementation of conversion.
* The new documentation for construction of maps and sets from arrays of keys mentions the handling of duplicates. Future work could be to do this for *all* code paths that convert an iterable to a map or set.
* I did not add documentation to conversions of a specific error type to a more general error type.
* I did not add documentation to unstable code.
This change was prepared by searching for the text "From<... for" and so may have missed some cases that for whatever reason did not match. I also looked for `Into` impls but did not find any worth documenting by the above criteria.
Optimize `core::str::Chars::count`
I wrote this a while ago after seeing this function as a bottleneck in a profile, but never got around to contributing it. I saw it again, and so here it is. The implementation is fairly complex, but I tried to explain what's happening at both a high level (in the header comment for the file), and in line comments in the impl. Hopefully it's clear enough.
This implementation (`case00_cur_libcore` in the benchmarks below) is somewhat consistently around 4x to 5x faster than the old implementation (`case01_old_libcore` in the benchmarks below), for a wide variety of workloads, without regressing performance on any of the workload sizes I've tried.
I also improved the benchmarks for this code, so that they explicitly check text in different languages and of different sizes (err, the cross product of language x size). The results of the benchmarks are here:
<details>
<summary>Benchmark results</summary>
<pre>
test str::char_count::emoji_huge::case00_cur_libcore ... bench: 20,216 ns/iter (+/- 3,673) = 17931 MB/s
test str::char_count::emoji_huge::case01_old_libcore ... bench: 108,851 ns/iter (+/- 12,777) = 3330 MB/s
test str::char_count::emoji_huge::case02_iter_increment ... bench: 329,502 ns/iter (+/- 4,163) = 1100 MB/s
test str::char_count::emoji_huge::case03_manual_char_len ... bench: 223,333 ns/iter (+/- 14,167) = 1623 MB/s
test str::char_count::emoji_large::case00_cur_libcore ... bench: 293 ns/iter (+/- 6) = 19331 MB/s
test str::char_count::emoji_large::case01_old_libcore ... bench: 1,681 ns/iter (+/- 28) = 3369 MB/s
test str::char_count::emoji_large::case02_iter_increment ... bench: 5,166 ns/iter (+/- 85) = 1096 MB/s
test str::char_count::emoji_large::case03_manual_char_len ... bench: 3,476 ns/iter (+/- 62) = 1629 MB/s
test str::char_count::emoji_medium::case00_cur_libcore ... bench: 48 ns/iter (+/- 0) = 14750 MB/s
test str::char_count::emoji_medium::case01_old_libcore ... bench: 217 ns/iter (+/- 4) = 3262 MB/s
test str::char_count::emoji_medium::case02_iter_increment ... bench: 642 ns/iter (+/- 7) = 1102 MB/s
test str::char_count::emoji_medium::case03_manual_char_len ... bench: 445 ns/iter (+/- 3) = 1591 MB/s
test str::char_count::emoji_small::case00_cur_libcore ... bench: 18 ns/iter (+/- 0) = 3777 MB/s
test str::char_count::emoji_small::case01_old_libcore ... bench: 23 ns/iter (+/- 0) = 2956 MB/s
test str::char_count::emoji_small::case02_iter_increment ... bench: 66 ns/iter (+/- 2) = 1030 MB/s
test str::char_count::emoji_small::case03_manual_char_len ... bench: 29 ns/iter (+/- 1) = 2344 MB/s
test str::char_count::en_huge::case00_cur_libcore ... bench: 25,909 ns/iter (+/- 39,260) = 13299 MB/s
test str::char_count::en_huge::case01_old_libcore ... bench: 102,887 ns/iter (+/- 3,257) = 3349 MB/s
test str::char_count::en_huge::case02_iter_increment ... bench: 166,370 ns/iter (+/- 12,439) = 2071 MB/s
test str::char_count::en_huge::case03_manual_char_len ... bench: 166,332 ns/iter (+/- 4,262) = 2071 MB/s
test str::char_count::en_large::case00_cur_libcore ... bench: 281 ns/iter (+/- 6) = 19160 MB/s
test str::char_count::en_large::case01_old_libcore ... bench: 1,598 ns/iter (+/- 19) = 3369 MB/s
test str::char_count::en_large::case02_iter_increment ... bench: 2,598 ns/iter (+/- 167) = 2072 MB/s
test str::char_count::en_large::case03_manual_char_len ... bench: 2,578 ns/iter (+/- 55) = 2088 MB/s
test str::char_count::en_medium::case00_cur_libcore ... bench: 44 ns/iter (+/- 1) = 15295 MB/s
test str::char_count::en_medium::case01_old_libcore ... bench: 201 ns/iter (+/- 51) = 3348 MB/s
test str::char_count::en_medium::case02_iter_increment ... bench: 322 ns/iter (+/- 40) = 2090 MB/s
test str::char_count::en_medium::case03_manual_char_len ... bench: 319 ns/iter (+/- 5) = 2109 MB/s
test str::char_count::en_small::case00_cur_libcore ... bench: 15 ns/iter (+/- 0) = 2333 MB/s
test str::char_count::en_small::case01_old_libcore ... bench: 14 ns/iter (+/- 0) = 2500 MB/s
test str::char_count::en_small::case02_iter_increment ... bench: 30 ns/iter (+/- 1) = 1166 MB/s
test str::char_count::en_small::case03_manual_char_len ... bench: 30 ns/iter (+/- 1) = 1166 MB/s
test str::char_count::ru_huge::case00_cur_libcore ... bench: 16,439 ns/iter (+/- 3,105) = 19777 MB/s
test str::char_count::ru_huge::case01_old_libcore ... bench: 89,480 ns/iter (+/- 2,555) = 3633 MB/s
test str::char_count::ru_huge::case02_iter_increment ... bench: 217,703 ns/iter (+/- 22,185) = 1493 MB/s
test str::char_count::ru_huge::case03_manual_char_len ... bench: 157,330 ns/iter (+/- 19,188) = 2066 MB/s
test str::char_count::ru_large::case00_cur_libcore ... bench: 243 ns/iter (+/- 6) = 20905 MB/s
test str::char_count::ru_large::case01_old_libcore ... bench: 1,384 ns/iter (+/- 51) = 3670 MB/s
test str::char_count::ru_large::case02_iter_increment ... bench: 3,381 ns/iter (+/- 543) = 1502 MB/s
test str::char_count::ru_large::case03_manual_char_len ... bench: 2,423 ns/iter (+/- 429) = 2096 MB/s
test str::char_count::ru_medium::case00_cur_libcore ... bench: 42 ns/iter (+/- 1) = 15119 MB/s
test str::char_count::ru_medium::case01_old_libcore ... bench: 180 ns/iter (+/- 4) = 3527 MB/s
test str::char_count::ru_medium::case02_iter_increment ... bench: 402 ns/iter (+/- 45) = 1579 MB/s
test str::char_count::ru_medium::case03_manual_char_len ... bench: 280 ns/iter (+/- 29) = 2267 MB/s
test str::char_count::ru_small::case00_cur_libcore ... bench: 12 ns/iter (+/- 0) = 2666 MB/s
test str::char_count::ru_small::case01_old_libcore ... bench: 12 ns/iter (+/- 0) = 2666 MB/s
test str::char_count::ru_small::case02_iter_increment ... bench: 19 ns/iter (+/- 0) = 1684 MB/s
test str::char_count::ru_small::case03_manual_char_len ... bench: 14 ns/iter (+/- 1) = 2285 MB/s
test str::char_count::zh_huge::case00_cur_libcore ... bench: 15,053 ns/iter (+/- 2,640) = 20067 MB/s
test str::char_count::zh_huge::case01_old_libcore ... bench: 82,622 ns/iter (+/- 3,602) = 3656 MB/s
test str::char_count::zh_huge::case02_iter_increment ... bench: 230,456 ns/iter (+/- 7,246) = 1310 MB/s
test str::char_count::zh_huge::case03_manual_char_len ... bench: 220,595 ns/iter (+/- 11,624) = 1369 MB/s
test str::char_count::zh_large::case00_cur_libcore ... bench: 227 ns/iter (+/- 65) = 20792 MB/s
test str::char_count::zh_large::case01_old_libcore ... bench: 1,136 ns/iter (+/- 144) = 4154 MB/s
test str::char_count::zh_large::case02_iter_increment ... bench: 3,147 ns/iter (+/- 253) = 1499 MB/s
test str::char_count::zh_large::case03_manual_char_len ... bench: 2,993 ns/iter (+/- 400) = 1577 MB/s
test str::char_count::zh_medium::case00_cur_libcore ... bench: 36 ns/iter (+/- 5) = 16388 MB/s
test str::char_count::zh_medium::case01_old_libcore ... bench: 142 ns/iter (+/- 18) = 4154 MB/s
test str::char_count::zh_medium::case02_iter_increment ... bench: 379 ns/iter (+/- 37) = 1556 MB/s
test str::char_count::zh_medium::case03_manual_char_len ... bench: 364 ns/iter (+/- 51) = 1620 MB/s
test str::char_count::zh_small::case00_cur_libcore ... bench: 11 ns/iter (+/- 1) = 3000 MB/s
test str::char_count::zh_small::case01_old_libcore ... bench: 11 ns/iter (+/- 1) = 3000 MB/s
test str::char_count::zh_small::case02_iter_increment ... bench: 20 ns/iter (+/- 3) = 1650 MB/s
</pre>
</details>
I also added fairly thorough tests for different sizes and alignments. This completes on my machine in 0.02s, which is surprising given how thorough they are, but it seems to detect bugs in the implementation. (I haven't run the tests on a 32 bit machine yet since before I reworked the code a little though, so... hopefully I'm not about to embarrass myself).
This uses similar SWAR-style techniques to the `is_ascii` impl I contributed in https://github.com/rust-lang/rust/pull/74066, so I'm going to request review from the same person who reviewed that one. That said am not particularly picky, and might not have the correct syntax for requesting a review from someone (so it goes).
r? `@nagisa`
Replace iterator-based construction of collections by `Into<T>`
Just a few quality of life improvements in the doc examples. I also removed some `Vec`s in favor of arrays.
Stabilize arc_new_cyclic
This stabilizes feature `arc_new_cyclic` as the implementation has been merged for one year and there is no unresolved questions. The FCP is not started yet.
Closes#75861 .
``@rustbot`` label +T-libs-api
Improve `Arc` and `Rc` documentation
This makes two changes (I can split the PR if necessary, but the changes are pretty small):
1. A bunch of trait implementations claimed to be zero cost; however, they use the `Arc<T>: From<Box<T>>` impl which is definitely not free, especially for large dynamically sized `T`.
2. The code in deferred initialization examples unnecessarily used excessive amounts of `unsafe`. This has been reduced.
doc: guarantee call order for sort_by_cached_key
`slice::sort_by_cached_key` takes a caching function `f: impl FnMut(&T) -> K`, which means that the order that calls to the caching function are made is user-visible. This adds a clause to the documentation to promise the current behavior, which is that `f` is called on all elements of the slice from left to right, unless the slice has len < 2 in which case `f` is not called.
For example, this can be used to ensure that the following code is a correct way to involve the index of the element in the sort key:
```rust
let mut index = 0;
slice.sort_by_cached_key(|x| (my_key(index, x), index += 1).0);
```
Clarify explicitly that BTree{Map,Set} are ordered.
One of the main reasons one would want to use a BTree{Map,Set} rather than a Hash{Map,Set} is because they maintain their keys in sorted order; but this was never explicitly stated in the top-level docs (it was only indirectly alluded to there, and stated explicitly in the docs for `iter`, `values`, etc.)
This PR states the ordering guarantee more prominently.
Add diagnostic items for macros
For use in Clippy, it adds diagnostic items to all the stable public macros
Clippy has lints that look for almost all of these (currently by name or path), but there are a few that aren't currently part of any lint, I could remove those if it's preferred to add them as needed rather than ahead of time
Yield means something else in the context of generators, which are
sufficiently close to iterators that it's better to avoid the
terminology collision here.
Implement `panic::update_hook`
Add a new function `panic::update_hook` to allow creating panic hooks that forward the call to the previously set panic hook, without race conditions. It works by taking a closure that transforms the old panic hook into a new one, while ensuring that during the execution of the closure no other thread can modify the panic hook. This is a small function so I hope it can be discussed here without a formal RFC, however if you prefer I can write one.
Consider the following example:
```rust
let prev = panic::take_hook();
panic::set_hook(Box::new(move |info| {
println!("panic handler A");
prev(info);
}));
```
This is a common pattern in libraries that need to do something in case of panic: log panic to a file, record code coverage, send panic message to a monitoring service, print custom message with link to github to open a new issue, etc. However it is impossible to avoid race conditions with the current API, because two threads can execute in this order:
* Thread A calls `panic::take_hook()`
* Thread B calls `panic::take_hook()`
* Thread A calls `panic::set_hook()`
* Thread B calls `panic::set_hook()`
And the result is that the original panic hook has been lost, as well as the panic hook set by thread A. The resulting panic hook will be the one set by thread B, which forwards to the default panic hook. This is not considered a big issue because the panic handler setup is usually run during initialization code, probably before spawning any other threads.
Using the new `panic::update_hook` function, this race condition is impossible, and the result will be either `A, B, original` or `B, A, original`.
```rust
panic::update_hook(|prev| {
Box::new(move |info| {
println!("panic handler A");
prev(info);
})
});
```
I found one real world use case here: 988cf403e7/src/detection.rs (L32) the workaround is to detect the race condition and panic in that case.
The pattern of `take_hook` + `set_hook` is very common, you can see some examples in this pull request, so I think it's natural to have a function that combines them both. Also using `update_hook` instead of `take_hook` + `set_hook` reduces the number of calls to `HOOK_LOCK.write()` from 2 to 1, but I don't expect this to make any difference in performance.
### Unresolved questions:
* `panic::update_hook` takes a closure, if that closure panics the error message is "panicked while processing panic" which is not nice. This is a consequence of holding the `HOOK_LOCK` while executing the closure. Could be avoided using `catch_unwind`?
* Reimplement `panic::set_hook` as `panic::update_hook(|_prev| hook)`?
Partially stabilize `maybe_uninit_extra`
This covers:
```rust
impl<T> MaybeUninit<T> {
pub unsafe fn assume_init_read(&self) -> T { ... }
pub unsafe fn assume_init_drop(&mut self) { ... }
}
```
It does not cover the const-ness of `write` under `const_maybe_uninit_write` nor the const-ness of `assume_init_read` (this commit adds `const_maybe_uninit_assume_init_read` for that).
FCP: https://github.com/rust-lang/rust/issues/63567#issuecomment-958590287.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This covers:
impl<T> MaybeUninit<T> {
pub unsafe fn assume_init_read(&self) -> T { ... }
pub unsafe fn assume_init_drop(&mut self) { ... }
}
It does not cover the const-ness of `write` under
`const_maybe_uninit_write` nor the const-ness of
`assume_init_read` (this commit adds
`const_maybe_uninit_assume_init_read` for that).
FCP: https://github.com/rust-lang/rust/issues/63567#issuecomment-958590287.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace usages of vec![].into_iter with [].into_iter
`[].into_iter` is idiomatic over `vec![].into_iter` because its simpler and faster (unless the vec is optimized away in which case it would be the same)
So we should change all the implementation, documentation and tests to use it.
I skipped:
* `src/tools` - Those are copied in from upstream
* `src/test/ui` - Hard to tell if `vec![].into_iter` was used intentionally or not here and not much benefit to changing it.
* any case where `vec![].into_iter` was used because we specifically needed a `Vec::IntoIter<T>`
* any case where it looked like we were intentionally using `vec![].into_iter` to test it.
Mak DefId to AccessLevel map in resolve for export
hir_id to accesslevel in resolve and applied in privacy
using local def id
removing tracing probes
making function not recursive and adding comments
Move most of Exported/Public res to rustc_resolve
moving public/export res to resolve
fix missing stability attributes in core, std and alloc
move code to access_levels.rs
return for some kinds instead of going through them
Export correctness, macro changes, comments
add comment for import binding
add comment for import binding
renmae to access level visitor, remove comments, move fn as closure, remove new_key
fmt
fix rebase
fix rebase
fmt
fmt
fix: move macro def to rustc_resolve
fix: reachable AccessLevel for enum variants
fmt
fix: missing stability attributes for other architectures
allow unreachable pub in rustfmt
fix: missing impl access level + renaming export to reexport
Missing impl access level was found thanks to a test in clippy
Fix a minor mistake in `String::try_reserve_exact` examples
The examples of `String::try_reserve_exact` didn't actually use `try_reserve_exact`, which was probably a minor mistake, and this PR fixed it.
Drop guards in slice sorting derive src pointers from &mut T, which is invalidated by interior mutation in comparison
I tried to run https://github.com/rust-lang/miri-test-libstd on `alloc` with `-Zmiri-track-raw-pointers`, and got a failure on the test `slice::panic_safe`. The test failure has nothing to do with panic safety, it's from how the test tests for panic safety.
I minimized the test failure into this very silly program:
```rust
use std::cell::Cell;
use std::cmp::Ordering;
#[derive(Clone)]
struct Evil(Cell<usize>);
fn main() {
let mut input = vec![Evil(Cell::new(0)); 3];
// Hits the bug pattern via CopyOnDrop in core
input.sort_unstable_by(|a, _b| {
a.0.set(0);
Ordering::Less
});
// Hits the bug pattern via InsertionHole in alloc
input.sort_by(|_a, b| {
b.0.set(0);
Ordering::Less
});
}
```
To fix this, I'm just removing the mutability/uniqueness where it wasn't required.
Implement split_at_spare_mut without Deref to a slice so that the spare slice is valid
~I'm not sure I understand what's going on here correctly. And I'm pretty sure this safety comment needs to be changed. I'm just referring to the same thing that `as_mut_ptr_range` does.~ (Thanks `@RalfJung` for the guidance and clearing things up)
I tried to run https://github.com/rust-lang/miri-test-libstd on alloc with -Zmiri-track-raw-pointers, and got a failure on the test `vec::test_extend_from_within`.
I minimized the test failure into this program:
```rust
#![feature(vec_split_at_spare)]
fn main() {
Vec::<i32>::with_capacity(1).split_at_spare_mut();
}
```
The problem is that the existing implementation is actually getting a pointer range where both pointers are derived from the initialized region of the Vec's allocation, but we need the second one to be valid for the region between len and capacity. (thanks Ralf for clearing this up)
RawVec: don't recompute capacity after allocating.
Currently it sets the capacity to `ptr.len() / mem::size_of::<T>()`
after any buffer allocation/reallocation. This would be useful if
allocators ever returned a `NonNull<[u8]>` with a size larger than
requested. But this never happens, so it's not useful.
Removing this slightly reduces the size of generated LLVM IR, and
slightly speeds up the hot path of `RawVec` growth.
r? `@ghost`
Allow reverse iteration of lowercase'd/uppercase'd chars
The PR implements `DoubleEndedIterator` trait for `ToLowercase` and `ToUppercase`.
This enables reverse iteration of lowercase/uppercase variants of character sequences.
One of use cases: determining whether a char sequence is a suffix of another one.
Example:
```rust
fn endswith_ignore_case(s1: &str, s2: &str) -> bool {
for eob in s1
.chars()
.flat_map(|c| c.to_lowercase())
.rev()
.zip_longest(s2.chars().flat_map(|c| c.to_lowercase()).rev())
{
match eob {
EitherOrBoth::Both(c1, c2) => {
if c1 != c2 {
return false;
}
}
EitherOrBoth::Left(_) => return true,
EitherOrBoth::Right(_) => return false,
}
}
true
}
```
Currently it sets the capacity to `ptr.len() / mem::size_of::<T>()`
after any buffer allocation/reallocation. This would be useful if
allocators ever returned a `NonNull<[u8]>` with a size larger than
requested. But this never happens, so it's not useful.
Removing this slightly reduces the size of generated LLVM IR, and
slightly speeds up the hot path of `RawVec` growth.
The previous implementation used slice::as_mut_ptr_range to derive the
pointer for the spare capacity slice. This is invalid, because that
pointer is derived from the initialized region, so it does not have
provenance over the uninitialized region.
Update example code for Vec::splice to change the length
The current example for `Vec::splice` illustrates the replacement of a section of length 2 with a new section of length 2. This isn't a particularly interesting case for splice, and makes it look a bit like a shorthand for the kind of manipulations that could be done with a mutable slice.
In order to provide a stronger example, this updates the example to use different lengths for the source and destination regions, and uses a slice from the middle of the vector to illustrate that this does not necessarily have to be at the beginning or the end.
Resolves#92067
The src pointers in CopyOnDrop and InsertionHole used to be *mut T, and
were derived via automatic conversion from &mut T. According to Stacked
Borrows 2.1, this means that those pointers become invalidated by
interior mutation in the comparison function.
But there's no need for mutability in this code path. Thus, we can
change the drop guards to use *const and derive those from &T.
Make split_inclusive() on an empty slice yield an empty output
`[].split_inclusive()` currently yields a single, empty slice. That's
different from `"".split_inslusive()`, which yields no output at
all. I think that makes the slice version harder to use.
The case where I ran into this bug was when writing code for
generating a diff between two slices of bytes. I wanted to prefix
removed lines with "-" and a added lines with "+". Due to
`split_inclusive()`'s current behavior, that means that my code prints
just a "-" or "+" for empty files. I suspect most existing callers
have similar "bugs" (which would be fixed by this patch).
Closes#89716.
add BinaryHeap::try_reserve and BinaryHeap::try_reserve_exact
`try_reserve` of many collections were stablized in https://github.com/rust-lang/rust/pull/87993 in 1.57.0. Add `try_reserve` for the rest collections such as `BinaryHeap` should be not controversial.
Use spare_capacity_mut instead of invalid unchecked indexing when joining str
This is a fix for https://github.com/rust-lang/rust/issues/91574
I think in general I'd prefer to see this code implemented with raw pointers or `MaybeUninit::write_slice`, but there's existing code in here based on copying from slice to slice, so converting everything from `&[T]` to `&[MaybeUninit<T>]` is less disruptive.
BTree: improve public descriptions and comments
BTreeSet has always used the term "value" next to and meaning the same thing as "elements" (in the mathematical sense but also used for key-value pairs in BTreeMap), while in the BTreeMap sense these "values" are known as "keys" and definitely not "values". Today I had enough of that.
r? `@Mark-Simulacrum`
Btree: assert more API compatibility
Introducing a member such as `BTreeSet::min()` would silently break compatibility if no code calls the existing `BTreeSet::min(set)`. `BTreeSet` is the only btree class silently bringing in stable members, apart from many occurrences of `#[derive(Debug)]` on iterators.
r? `@Mark-Simulacrum`
Rollup of 11 pull requests
Successful merges:
- #91668 (Remove the match on `ErrorKind::Other`)
- #91678 (Add tests fixed by #90023)
- #91679 (Move core/stream/stream/mod.rs to core/stream/stream.rs)
- #91681 (fix typo in `intrinsics::raw_eq` docs)
- #91686 (Fix `Vec::reserve_exact` documentation)
- #91697 (Delete Utf8Lossy::from_str)
- #91706 (Add unstable book entries for parts of asm that are not being stabilized)
- #91709 (Replace iterator-based set construction by *Set::From<[T; N]>)
- #91716 (Improve x.py logging and defaults a bit more)
- #91747 (Add pierwill to .mailmap)
- #91755 (Fix since attribute for const_linked_list_new feature)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Replace iterator-based set construction by *Set::From<[T; N]>
This uses the array-based construction for `BtreeSet`s and `HashSet`s instead of first creating an iterator. I could also replace the `let mut a = Set::new(); a.insert(...);` fragments if desired.
Fix `Vec::reserve_exact` documentation
The documentation previously said the new capacity cannot overflow `usize`, but in fact it cannot exceed `isize::MAX`.
Update documentation to use `from()` to initialize `HashMap`s and `BTreeMap`s
As of Rust 1.56, `HashMap` and `BTreeMap` both have associated `from()` functions. I think using these in the documentation cleans things up a bit. It allows us to remove some of the `mut`s and avoids the Initialize-Then-Modify anti-pattern.
replace vec::Drain drop loops with drop_in_place
The `Drain::drop` implementation came up in https://github.com/rust-lang/rust/pull/82185#issuecomment-789584796 as potentially interfering with other optimization work due its widespread use somewhere in `println!`
`@rustbot` label T-libs-impl
Suggest try_reserve in try_reserve_exact
During developing #91529 , I found that `try_reserve_exact` suggests `reserve` for further insertions. I think it's a mistake by copy&paste, `try_reserve` is better here.
Implement VecDeque::retain_mut
Part of https://github.com/rust-lang/rust/issues/90829.
In https://github.com/rust-lang/rust/pull/90772, someone suggested that `retain_mut` should also be implemented on `VecDeque`. I think that it follows the same logic (coherency). So first: is it ok? Second: should I create a new feature for it or can we put it into the same one?
r? `@joshtriplett`
For users looking at documentation through IDE popups, this gives them
relevant information rather than the generic trait documentation wording
“Performs the conversion”. For users reading the documentation for a
specific type for any reason, this informs them when the conversion may
allocate or copy significant memory versus when it is always a move or
cheap copy.
Notes on specific cases:
* The new documentation for `From<T> for T` explains that it is not a
conversion at all.
* Also documented `impl<T, U> Into<U> for T where U: From<T>`, the other
central blanket implementation of conversion.
* I did not add documentation to conversions of a specific error type to
a more general error type.
* I did not add documentation to unstable code.
This change was prepared by searching for the text "From<... for" and so
may have missed some cases that for whatever reason did not match. I
also looked for `Into` impls but did not find any worth documenting by
the above criteria.
Add `into_iter().filter().collect()` as a comparison point since it was reported to be faster than `retain`.
Remove clone inside benchmark loop to reduce allocator noise.
Rollup of 10 pull requests
Successful merges:
- #88906 (Implement write() method for Box<MaybeUninit<T>>)
- #90269 (Make `Option::expect` unstably const)
- #90854 (Type can be unsized and uninhabited)
- #91170 (rustdoc: preload fonts)
- #91273 (Fix ICE #91268 by checking that the snippet ends with a `)`)
- #91381 (Android: -ldl must appear after -lgcc when linking)
- #91453 (Document Windows TLS drop behaviour)
- #91462 (Use try_normalize_erasing_regions in needs_drop)
- #91474 (suppress warning about set_errno being unused on DragonFly)
- #91483 (Sync rustfmt subtree)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Implement write() method for Box<MaybeUninit<T>>
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
Remove unnecessary check in VecDeque::grow
All callers already check that the buffer is full before calling
`grow()`. This is where it makes the most sense, since `grow()` is
`inline(never)` and we don't want to pay for a function call just for
that check.
It could also be argued that it would be correct to call `grow()` even
if the buffer wasn't full yet.
This change breaks no code since `grow()` is not `pub`.
This adds method similar to `MaybeUninit::write` main difference being
it returns owned `Box`. This can be used to elide copy from stack
safely, however it's not currently tested that the optimization actually
occurs.
Analogous methods are not provided for `Rc` and `Arc` as those need to
handle the possibility of sharing. Some version of them may be added in
the future.
This was discussed in #63291 which this change extends.
Introduce `RawVec::reserve_for_push`.
If `Vec::push`'s capacity check fails it calls `RawVec::reserve`, which
then also does a capacity check.
This commit introduces `reserve_for_push` which skips the redundant
capacity check, for some slight compile time speed-ups.
I tried lots of minor variations on this, e.g. different inlining
attributes. This was the best one I could find.
r? `@ghost`
All callers already check that the buffer is full before calling
`grow()`. This is where it makes the most sense, since `grow()` is
`inline(never)` and we don't want to pay for a function call just for
that check.
It could also be argued that it would be correct to call `grow()` even
if the buffer wasn't full yet.
This change breaks no code since `grow()` is not `pub`.
If `Vec::push`'s capacity check fails it calls `RawVec::reserve`, which
then also does a capacity check.
This commit introduces `reserve_for_push` which skips the redundant
capacity check, for some slight compile time speed-ups.
I tried lots of minor variations on this, e.g. different inlining
attributes. This was the best one I could find.
Eliminate an unreachable codepath from String::from_utf8_lossy
`Utf8Lossy`'s `Iterator` implementation ensures that only the **final** chunk has an empty slice for `broken`:
dd549dcab4/library/core/src/str/lossy.rs (L46-L47)
Thus the only way the **first** chunk could have an empty `broken` is if it is the **final** chunk, i.e. there is only one chunk total. And the only way that there could be one chunk total with an empty `broken` is if the whole input is valid utf8 and non-empty.
That condition has already been handled by an early return, so at the point that the first `REPLACEMENT` is being pushed, it's impossible for `first_broken` to be empty.
Fix Iterator::advance_by contract inconsistency
The `advance_by(n)` docs state that in the error case `Err(k)` that k is always less than n.
It also states that `advance_by(0)` may return `Err(0)` to indicate an exhausted iterator.
These statements are inconsistent.
Since only one implementation (Skip) actually made use of that I changed it to return Ok(()) in that case too.
While adding some tests I also found a bug in `Take::advance_back_by`.
Utf8Lossy's Iterator implementation ensures that only the final chunk
has an empty slice for broken. Thus the only way the first chunk could
have an empty broken is if it is the final chunk, i.e. there is only one
chunk total. And the only way that there could be one chunk total is if
the whole input is valid utf8 and non-empty. That condition has already
been handled by an early return, so at the point that the first
REPLACEMENT is being pushed, it's impossible for first_broken to be
empty.
Mark `Arc::from_inner` / `Rc::from_inner` as unsafe
While it's an internal function, it is easy to create invalid Arc/Rcs to
a dangling pointer with it.
Fixes https://github.com/rust-lang/rust/issues/89740
The `advance_by(n)` docs state that in the error case `Err(k)` that k is always less than n.
It also states that `advance_by(0)` may return `Err(0)` to indicate an exhausted iterator.
These statements are inconsistent.
Since only one implementation (Skip) actually made use of that I changed it to return Ok(()) in that case too.
While adding some tests I also found a bug in `Take::advance_back_by`.
This commit makes the following functions from `core::str` `const fn`:
- `from_utf8[_mut]` (`feature(const_str_from_utf8)`)
- `from_utf8_unchecked_mut` (`feature(const_str_from_utf8_unchecked_mut)`)
- `Utf8Error::{valid_up_to,error_len}` (`feature(const_str_from_utf8)`)
Add Vec::retain_mut
This is to continue the discussion started in #83218.
Original comment was:
> Take 2 of #34265, since I needed this today.
The reason I think why we should add `retain_mut` is for coherency and for discoverability. For example we have `chunks` and `chunks_mut` or `get` and `get_mut` or `iter` and `iter_mut`, etc. When looking for mutable `retain`, I would expect `retain_mut` to exist. It took me a while to find out about `drain_filter`. So even if it provides an API close to `drain_filter`, just for the discoverability, I think it's worth it.
cc ``````@m-ou-se`````` ``````@jonas-schievink`````` ``````@Mark-Simulacrum``````
Optimize BinaryHeap::extend from Vec
This improves the performance of extending `BinaryHeap`s from vectors directly. Future work may involve extending this optimization to other, similar, cases where the length of the added elements is well-known, but this is not yet done in this PR.
Make RawVec private to alloc
RawVec was previously exposed for compiler-internal use (libarena specifically) in 1acbb0a935
Since it is unstable, doc-hidden and has no associated tracking issue it was never meant for public use. And since
it is no longer used outside alloc itself it can be made private again.
Also remove some functions that are dead due to lack of internal users.
Better document `Box` and `alloc::alloc::box_free` connection
The internal `alloc::alloc::box_free` function requires that its signature matches the `owned_box` struct's declaration, but previously that connection was only documented on the `box_free` function.
This PR makes the documentation two-way to help anyone making theoretical changes to `Box` to see the connection, since changes are more likely to originate from `Box`.
RawVec was previously exposed for compiler-internal use (libarena specifically) in 1acbb0a935
Since it is unstable, doc-hidden and has no associated tracking issue it was never meant for public use. And since
it is no longer used outside alloc itself it can be made private again.
Also remove some functions that are dead due to lack of internal users.
Add #[must_use] to alloc functions that would leak memory
As [requested](https://github.com/rust-lang/rust/pull/89899#issuecomment-955600779) by `@joshtriplett.`
> Please do go ahead and add the ones whose only legitimate use for ignoring the return value is leaking memory. (In a separate PR please.) I think it's sufficiently error-prone to call something like alloc and ignore the result that it's legitimate to require `let _ =` for that.
I added `realloc` myself. Clippy ignored it because of its `mut` argument.
```rust
alloc/src/alloc.rs:123:1 alloc unsafe fn realloc(ptr: *mut u8, layout: Layout, new_size: usize) -> *mut u8;
```
Parent issue: #89692
r? `@joshtriplett`
Add #[must_use] to remaining core functions
I've run out of compelling reasons to group functions together across crates so I'm just going to go module-by-module. This is everything remaining from the `core` crate.
Ignored by clippy for reasons unknown:
```rust
core::alloc::Layout unsafe fn for_value_raw<T: ?Sized>(t: *const T) -> Self;
core::any const fn type_name_of_val<T: ?Sized>(_val: &T) -> &'static str;
```
Ignored by clippy because of `mut`:
```rust
str fn split_at_mut(&mut self, mid: usize) -> (&mut str, &mut str);
```
<del>
Ignored by clippy presumably because a caller might want `f` called for side effects. That seems like a bad usage of `map` to me.
```rust
core::cell::Ref<'b, T> fn map<U: ?Sized, F>(orig: Ref<'b, T>, f: F) -> Ref<'b, T>;
core::cell::Ref<'b, T> fn map_split<U: ?Sized, V: ?Sized, F>(orig: Ref<'b, T>, f: F) -> (Ref<'b, U>, Ref<'b, V>);
```
</del>
Parent issue: #89692
r? ```@joshtriplett```
Add #[must_use] to expensive computations
The unifying theme for this commit is weak, admittedly. I put together a list of "expensive" functions when I originally proposed this whole effort, but nobody's cared about that criterion. Still, it's a decent way to bite off a not-too-big chunk of work.
Given the grab bag nature of this commit, the messages I used vary quite a bit. I'm open to wording changes.
For some reason clippy flagged four `BTreeSet` methods but didn't say boo about equivalent ones on `HashSet`. I stared at them for a while but I can't figure out the difference so I added the `HashSet` ones in.
```rust
// Flagged by clippy.
alloc::collections::btree_set::BTreeSet<T> fn difference<'a>(&'a self, other: &'a BTreeSet<T>) -> Difference<'a, T>;
alloc::collections::btree_set::BTreeSet<T> fn symmetric_difference<'a>(&'a self, other: &'a BTreeSet<T>) -> SymmetricDifference<'a, T>
alloc::collections::btree_set::BTreeSet<T> fn intersection<'a>(&'a self, other: &'a BTreeSet<T>) -> Intersection<'a, T>;
alloc::collections::btree_set::BTreeSet<T> fn union<'a>(&'a self, other: &'a BTreeSet<T>) -> Union<'a, T>;
// Ignored by clippy, but not by me.
std::collections::HashSet<T, S> fn difference<'a>(&'a self, other: &'a HashSet<T, S>) -> Difference<'a, T, S>;
std::collections::HashSet<T, S> fn symmetric_difference<'a>(&'a self, other: &'a HashSet<T, S>) -> SymmetricDifference<'a, T, S>
std::collections::HashSet<T, S> fn intersection<'a>(&'a self, other: &'a HashSet<T, S>) -> Intersection<'a, T, S>;
std::collections::HashSet<T, S> fn union<'a>(&'a self, other: &'a HashSet<T, S>) -> Union<'a, T, S>;
```
Parent issue: #89692
r? ```@joshtriplett```
Previously, it wasn't clear whether "This could include" was referring
to logic errors, or undefined behaviour. Tweak wording to clarify this
sentence does not relate to UB.
Fix MIRI UB in `Vec::swap_remove`
Fixes#90055
I find it weird that `Vec::swap_remove` read the last element to the stack just to immediately put it back in the `Vec` in place of the one at index `index`. It seems much more natural to me to just read the element at position `index` and then move the last element in its place. I guess this might also slightly improve codegen.
Avoid overflow in `VecDeque::with_capacity_in()`.
The overflow only happens if alloc is compiled with overflow checks enabled and the passed capacity is greater or equal 2^(usize::BITS-1). The overflow shadows the expected "capacity overflow" panic leading to a test failure if overflow checks are enabled for std in the CI.
Unblocks [CI: Enable overflow checks for test (non-dist) builds #89776](https://github.com/rust-lang/rust/pull/89776).
For some reason the overflow is only observable with optimization turned off, but that is a separate issue.
Avoid allocations and copying in Vec::leak
The [`Vec::leak`] method (#62195) is currently implemented by calling `Vec::into_boxed_slice` and `Box::leak`. This shrinks the vector before leaking it, which potentially causes a reallocation and copies the vector's contents.
By avoiding the conversion to `Box`, we can instead leak the vector without any expensive operations, just by returning a slice reference and forgetting the `Vec`. Users who *want* to shrink the vector first can still do so by calling `shrink_to_fit` explicitly.
**Note:** This could break code that uses `Box::from_raw` to “un-leak” the slice returned by `Vec::leak`. However, the `Vec::leak` docs explicitly forbid this, so such code is already incorrect.
[`Vec::leak`]: https://doc.rust-lang.org/stable/std/vec/struct.Vec.html#method.leak
Optimize VecDeque::append
Optimize `VecDeque::append` to do unsafe copy rather than iterating through each element.
On my `Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz`, the benchmark shows 37% improvements:
```
Master:
custom-bench vec_deque_append 583164 ns/iter
custom-bench vec_deque_append 550040 ns/iter
Patched:
custom-bench vec_deque_append 349204 ns/iter
custom-bench vec_deque_append 368164 ns/iter
```
Additional notes on the context: this is the third attempt to implement a non-trivial version of `VecDeque::append`, the last two are reverted due to unsoundness or regression, see:
- https://github.com/rust-lang/rust/pull/52553, reverted in https://github.com/rust-lang/rust/pull/53571
- https://github.com/rust-lang/rust/pull/53564, reverted in https://github.com/rust-lang/rust/pull/54851
Both cases are covered by existing tests.
Signed-off-by: tabokie <xy.tao@outlook.com>
The unifying theme for this commit is weak, admittedly. I put together a
list of "expensive" functions when I originally proposed this whole
effort, but nobody's cared about that criterion. Still, it's a decent
way to bite off a not-too-big chunk of work.
Given the grab bag nature of this commit, the messages I used vary quite
a bit.
`[].split_inclusive()` currently yields a single, empty slice. That's
different from `"".split_inslusive()`, which yields no output at
all. I think that makes the slice version harder to use.
The case where I ran into this bug was when writing code for
generating a diff between two slices of bytes. I wanted to prefix
removed lines with "-" and a added lines with "+". Due to
`split_inclusive()`'s current behavior, that means that my code prints
just a "-" or "+" for empty files. I suspect most existing callers
have similar "bugs" (which would be fixed by this patch).
Closes#89716.
Add #[must_use] to non-mutating verb methods
These are methods that could be misconstrued to mutate their input, similar to #89694. I gave each one a different custom message.
I wrote that `upgrade` and `downgrade` don't modify the input pointers. Logically they don't, but technically they do...
Parent issue: #89692
r? ```@joshtriplett```
Add #[must_use] to from_value conversions
I added two methods to the list myself. Clippy did not flag them because they take `mut` args, but neither modifies their argument.
```rust
core::str const unsafe fn from_utf8_unchecked_mut(v: &mut [u8]) -> &mut str;
std::ffi::CString unsafe fn from_raw(ptr: *mut c_char) -> CString;
```
I put a custom note on `from_raw`:
```rust
#[must_use = "call `drop(from_raw(ptr))` if you intend to drop the `CString`"]
pub unsafe fn from_raw(ptr: *mut c_char) -> CString {
```
Parent issue: #89692
r? ``@joshtriplett``
Add #[must_use] to alloc constructors
Added `#[must_use]`. to the various forms of `new`, `pin`, and `with_capacity` in the `alloc` crate. No extra explanations given as I couldn't think of anything useful to add.
I figure this deserves extra scrutiny compared to the other PRs I've done so far. In particular:
* The 4 `pin`/`pin_in` methods I touched. Are there legitimate use cases for pinning and not using the result? Pinning's a difficult concept I'm not very comfortable with.
* `Box`'s constructors. Do people ever create boxes just for the side effects... allocating or zeroing out memory?
Parent issue: #89692
r? ``@joshtriplett``
Cfg hide no_global_oom_handling and no_fp_fmt_parse
These are unstable sysroot customisation cfg options that only projects building their own sysroot will use (e.g. Rust-for-linux). Most users shouldn't care. `no_global_oom_handling` can be especially annoying since it's applied on many commonly used alloc crate methods (e.g. `Box::new`, `Vec::push`).
r? ```@GuillaumeGomez```
Add documentation to boxed conversions
Among other changes, documents whether allocations are necessary
to complete the type conversion.
Part of #51430, supersedes #89199
These methods could be misconstrued as modifying their arguments instead
of returning new values.
Where possible I made the note recommend a method that does mutate in
place.
Among other changes, documents whether allocations are necessary
to complete the type conversion.
Part of #51430
Co-authored-by: Giacomo Stevanato <giaco.stevanato@gmail.com>
Co-authored-by: Joshua Nelson <github@jyn.dev>
Make cfg imply doc(cfg)
This is a reopening of #79341, rebased and modified a bit (we made a lot of refactoring in rustdoc's types so they needed to be reflected in this PR as well):
* `hidden_cfg` is now in the `Cache` instead of `DocContext` because `cfg` information isn't stored anymore on `clean::Attributes` type but instead computed on-demand, so we need this information in later parts of rustdoc.
* I removed the `bool_to_options` feature (which makes the code a bit simpler to read for `SingleExt` trait implementation.
* I updated the version for the feature.
There is only one thing I couldn't figure out: [this comment](https://github.com/rust-lang/rust/pull/79341#discussion_r561855624)
> I think I'll likely scrap the whole `SingleExt` extension trait as the diagnostics for 0 and >1 items should be different.
How/why should they differ?
EDIT: this part has been solved, the current code was fine, just needed a little simplification.
cc `@Nemo157`
r? `@jyn514`
Original PR description:
This is only active when the `doc_cfg` feature is active.
The implicit cfg can be overridden via `#[doc(cfg(...))]`, so e.g. to hide a `#[cfg]` you can use something like:
```rust
#[cfg(unix)]
#[doc(cfg(all()))]
pub struct Unix;
```
By adding `#![doc(cfg_hide(foobar))]` to the crate attributes the cfg `#[cfg(foobar)]` (and _only_ that _exact_ cfg) will not be implicitly treated as a `doc(cfg)` to render a message in the documentation.
`slice::sort_by_cached_key` takes a caching function
`f: impl FnMut(&T) -> K`, which means that the order that calls to the
caching function are made is user-visible. This adds a clause to the
documentation to promise the current behavior, which is that `f` is
called on all elements of the slice from left to right, unless the slice
has len < 2 in which case `f` is not called.
refactor: make VecDeque's IterMut fields module-private, not just crate-private
Made the fields of VecDeque's IterMut private by creating a IterMut::new(...) function to create a new instance of IterMut and migrating usage to use IterMut::new(...).
Made the fields of VecDeque's IterMut private by creating a IterMut::new(...) function to create a new instance of IterMut and migrating usage to use IterMut::new(...).
refactor: VecDeques PairSlices fields to private
Reducing VecDeque's PairSlices fields to private, a `from(...)` method is already used to create PairSlices.
Correctly handle supertraits for min_specialization
Supertraits of specialization markers could circumvent checks for
min_specialization. Elaborating predicates prevents this.
r? ````@nikomatsakis````
implement advance_(back_)_by on more iterators
Add more efficient, non-default implementations for `feature(iter_advance_by)` (#77404) on more iterators and adapters.
This PR only contains implementations where skipping over items doesn't elide any observable side-effects such as user-provided closures or `clone()` functions. I'll put those in a separate PR.
Add truncate note to Vec::resize
A very minor addition to the `Vec::resize` documentation to point out the `truncate` method.
When I was searching for something matching `truncate` I managed to miss it, along with some colleagues. We later found it by chance. We did find `resize` however, so I was hoping to point it out in the documentation.
Optimize unnecessary check in Vec::retain
The function `vec::Vec::retain` only have two stages:
1. Nothing was deleted.
2. Some elements were deleted.
Here is an unnecessary check `if g.deleted_cnt > 0` in the loop, and it's difficult for compiler to optimize it. I split the loop into two stages manully and keep the code clean using const generics.
I write a special but common bench case for this optimization. I call retain on vec but keep all elements.
Before and after this optimization:
```
test vec::bench_retain_whole_100000 ... bench: 84,803 ns/iter (+/- 17,314)
```
```
test vec::bench_retain_whole_100000 ... bench: 42,638 ns/iter (+/- 16,910)
```
The result is expected, there are two `if`s before the optimization and one `if` after.
Fix spacing of links in inline code.
Similar to #80733, but the focus is different. This PR eliminates all occurrences of pieced-together inline code blocks like [`Box`]`<`[`Option`]`<T>>` and replaces them with good-looking ones (using HTML-syntax), like <code>[Box]<[Option]\<T>></code>. As far as I can tell, I should’ve found all of these in the standard library (regex search with `` r"`\]`|`\[`" ``) \[except for in `core::convert` where I’ve noticed other things in the docs that I want to fix in a separate PR]. In particular, unlike #80733, I’ve added almost no new instance of inline code that’s broken up into multiple links (or some link and some link-free part). I also added tooltips (the stuff in quotes for the markdown link listings) in places that caught my eye, but that’s by no means systematic, just opportunistic.
[Box]: https://doc.rust-lang.org/std/boxed/struct.Box.html "Box"
[`Box`]: https://doc.rust-lang.org/std/boxed/struct.Box.html "Box"
[Option]: https://doc.rust-lang.org/std/option/enum.Option.html "Option"
[`Option`]: https://doc.rust-lang.org/std/option/enum.Option.html "Option"
Context: I got annoyed by repeatedly running into new misformatted inline code while reading the standard library docs. I know that once issue #83997 (and/or related ones) are resolved, these changes become somewhat obsolete, but I fail to notice much progress on that end right now.
r? `@jyn514`
----------
Fix spacing for links inside code blocks, and improve link tooltips in alloc::fmt
----------
Fix spacing for links inside code blocks, and improve link tooltips in alloc::{rc, sync}
----------
Fix spacing for links inside code blocks, and improve link tooltips in alloc::string
----------
Fix spacing for links inside code blocks in alloc::vec
----------
Fix spacing for links inside code blocks in core::option
----------
Fix spacing for links inside code blocks, and improve a few link tooltips in core::result
----------
Fix spacing for links inside code blocks in core::{iter::{self, iterator}, stream::stream, poll}
----------
Fix spacing for links inside code blocks, and improve a few link tooltips in std::{fs, path}
----------
Fix spacing for links inside code blocks in std::{collections, time}
----------
Fix spacing for links inside code blocks in and make formatting of `&str`-like types consistent in std::ffi::{c_str, os_str}
----------
Fix spacing for links inside code blocks, and improve link tooltips in std::ffi
----------
Fix spacing for links inside code blocks, and improve a few link tooltips
in std::{io::{self, buffered::{bufreader, bufwriter}, cursor, util}, net::{self, addr}}
----------
Fix typo in link to `into` for `OsString` docs
----------
Remove tooltips that will probably become redundant in the future
----------
Apply suggestions from code review
Replacing `…std/primitive.reference.html` paths with just `reference`
Co-authored-by: Joshua Nelson <github@jyn.dev>
----------
Also replace `…std/primitive.reference.html` paths with just `reference` in `core::pin`
Introduce `Rvalue::ShallowInitBox`
Polished version of #88700.
Implements MCP rust-lang/compiler-team#460, and should allow #43596 to go forward.
In short, creating an empty box is split from a nullary-op `NullOp::Box` into two steps, first a call to `exchange_malloc`, then a `Rvalue::ShallowInitBox` which transmutes `*mut u8` to a shallow-initialized `Box<T>`. This allows the `exchange_malloc` call to unwind. Details can be found in the MCP.
`NullOp::Box` is not yet removed, purely to make reverting easier in case anything goes wrong as the result of this PR. If revert is needed a reversion of "Use Rvalue::ShallowInitBox for box expression" commit followed by a test bless should be sufficient.
Experiments in #88700 showed a very slight compile-time perf regression due to (supposedly) slightly more time spent in LLVM. We could omit unwind edge generation (in non-`oom=panic` case) in box expression MIR construction to restore perf; but I don't think it's necessary since runtime perf isn't affected and perf difference is rather small.
Fix missing `no_global_oom_handling` cfg-gating
Cfg-gate these trait impls that are neglected.
These functions compile now because they use `box` syntax which depends on `exchange_malloc` during codegen only; as a result they compiles with cfg `no_global_oom_handling` but shouldn't.
Discovered in #89030 because that PR makes `box` syntax depend on `exchange_malloc` lang item during MIR construction.
BTreeMap/BTreeSet::from_iter: use bulk building to improve the performance
Bulk building is a common technique to increase the performance of building a fresh btree map. Instead of inserting items one-by-one, we sort all the items beforehand then create the BtreeMap in bulk.
Benchmark
```
./x.py bench library/alloc --test-args btree::map::from_iter
```
* Before
```
test btree::map::from_iter_rand_100 ... bench: 3,694 ns/iter (+/- 840)
test btree::map::from_iter_rand_10_000 ... bench: 1,033,446 ns/iter (+/- 192,950)
test btree::map::from_iter_seq_100 ... bench: 5,689 ns/iter (+/- 1,259)
test btree::map::from_iter_seq_10_000 ... bench: 861,033 ns/iter (+/- 118,815)
```
* After
```
test btree::map::from_iter_rand_100 ... bench: 3,033 ns/iter (+/- 707)
test btree::map::from_iter_rand_10_000 ... bench: 775,958 ns/iter (+/- 105,152)
test btree::map::from_iter_seq_100 ... bench: 2,969 ns/iter (+/- 336)
test btree::map::from_iter_seq_10_000 ... bench: 258,292 ns/iter (+/- 29,364)
```
BTree: remove Ord bound from new
`K: Ord` bound is unnecessary on `BTree{Map,Set}::new` and their `Default` impl. No elements exist so there are nothing to compare anyway, so I don't think "future proof" would be a blocker here. This is analogous to `HashMap::new` not having a `K: Eq + Hash` bound.
#79245 originally does this and for some reason drops the change to `new` and `Default`. I can see why changes to other methods like `entry` or `symmetric_difference` need to be careful but I couldn't find out any reason not to do it on `new`.
Removing the bound also makes the stabilisation of `const fn new` not depending on const trait bounds.
cc `@steffahn` who suggests me to make this PR.
r? `@dtolnay`
Bulk building is a common technique to increase the performance of
building a fresh btree map. Instead of inserting items one-by-one,
we sort all the items beforehand then create the BtreeMap in bulk.
