Now that `std::old_io` has been removed for quite some time the naming real
estate here has opened up to allow these modules to move back to their proper
names.
So, I realize this is really late in the game so it's unlikely to be accepted but `FromRawFd`/`FromRawHandle` are necessary for fine grain control over file creation. For example, the current `OpenOptions` does not provide a way to avoid file creation races (there's no way to specify `O_EXCL` or the windows equivalent). Stabilizing these traits and their implementations will give 1.0 users fine-grain control over file creation without committing to any new complex APIs. Additionally, `AsRawFd`/`AsRawHandle` are already stable so I feel that that stabilizing their inverses is a reasonably small change.
Disclaimer: I'm asking because my crate, tempfile, depends on this feature.
The [UnsafeCell documentation says it is undefined behavior](http://doc.rust-lang.org/nightly/std/cell/struct.UnsafeCell.html), so people shouldn't do it.
This happened to catch one case in libstd that was doing this, and I switched that to use an UnsafeCell internally.
Closes#13146
Previously, `try_write` actually only obtained shared read access (but would return a `RwLockWriteGuard` if that access was successful).
Also updates the docs for `try_read` and `try_write`, which were leftover from when those methods returned `Option` instead of `Result`.
Many bounds are currently of the form `T: ?Sized + AsRef<OsStr>` where the
argument is `&T`, but the pattern elsewhere (primarily `std::fs`) has been to
remove the `?Sized` bound and take `T` instead (allowing usage with both
references and owned values). This commit generalizes the possible apis in
`std::env` from `&T` to `T` in this fashion.
The `split_paths` function remains the same as the return value borrows the
input value, so ta borrowed reference is required.
Many bounds are currently of the form `T: ?Sized + AsRef<OsStr>` where the
argument is `&T`, but the pattern elsewhere (primarily `std::fs`) has been to
remove the `?Sized` bound and take `T` instead (allowing usage with both
references and owned values). This commit generalizes the possible apis in
`std::env` from `&T` to `T` in this fashion.
The `split_paths` function remains the same as the return value borrows the
input value, so ta borrowed reference is required.
As pointed out in #17136 the semantics of a `BufStream` aren't always what one
expects, and it looks like other [languages like C#][c-sharp] implement a
buffered stream with only one underlying buffer. For now this commit
destabilizes the primitive in the `std::io` module to give us some more time in
figuring out what to do with it.
[c-sharp]: https://msdn.microsoft.com/en-us/library/system.io.bufferedstream%28v=vs.110%29.aspx
[breaking-change]
This test has deadlocked on Windows once or twice now and we've had lots of
problems in the past of threads panicking when the process is being shut down.
One of the two threads in this test is guaranteed to panic because of the
`.unwrap()` on the `send` calls, so just call `recv` on both receivers after the
test executes to ensure that both threads are dying/dead.
This did not render as intended:
>This is defined in RFC 5737 - 192.0.2.0/24 (TEST-NET-1) - 198.51.100.0/24 (TEST-NET-2) - 203.0.113.0/24 (TEST-NET-3)
vs.
> This is defined in RFC 5737
- 192.0.2.0/24 (TEST-NET-1)
- 198.51.100.0/24 (TEST-NET-2)
- 203.0.113.0/24 (TEST-NET-3)
This test has deadlocked on Windows once or twice now and we've had lots of
problems in the past of threads panicking when the process is being shut down.
One of the two threads in this test is guaranteed to panic because of the
`.unwrap()` on the `send` calls, so just call `recv` on both receivers after the
test executes to ensure that both threads are dying/dead.
I'm uncertain whether the 3 implementations in `net2` should unwrap the socket address values. Without unwrapping it looks like this:
```
UdpSocket { addr: Ok(V4(127.0.0.1:34354)), inner: 3 }
TcpListener { addr: Ok(V4(127.0.0.1:9123)), inner: 4 }
TcpStream { addr: Ok(V4(127.0.0.1:9123)), peer: Ok(V4(127.0.0.1:58360)), inner: 5 }
```
One issue is that you can create, e.g. `UdpSocket`s with bad addresses, which means you can't just unwrap in the implementation:
```
#![feature(from_raw_os)]
use std::net::UdpSocket;
use std::os::unix::io::FromRawFd;
let sock: UdpSocket = unsafe { FromRawFd::from_raw_fd(-1) };
println!("{:?}", sock); // prints "UdpSocket { addr: Err(Error { repr: Os(9) }), inner: -1 }"
```
Fixes#23134.
Since the hashmap and its hasher are implemented in different crates, we
currently can't benefit from inlining, which means that especially for
small, fixed size keys, there is a huge overhead in hash calculations,
because the compiler can't apply optimizations that only apply for these
keys.
Fixes the brainfuck benchmark in #24014.
Since the hashmap and its hasher are implemented in different crates, we
currently can't benefit from inlining, which means that especially for
small, fixed size keys, there is a huge overhead in hash calculations,
because the compiler can't apply optimizations that only apply for these
keys.
Fixes the brainfuck benchmark in #24014.
Apparently implementations are allowed to return EDEADLK instead of blocking
forever, in which case this can lead to unsafety in the `RwLock` primitive
exposed by the standard library. A debug-build of the standard library would
have caught this error (due to the debug assert), but we don't ship debug
builds right now.
This commit adds explicit checks for the EDEADLK error code and triggers a panic
to ensure the call does not succeed.
Closes#25012
Ensures that the same error type is propagated throughout. Unnecessary leakage
of the internals is prevented through the usage of stability attributes.
Closes#24748
Ensures that the same error type is propagated throughout. Unnecessary leakage
of the internals is prevented through the usage of stability attributes.
Closes#24748
These implementations were intended to be unstable, but currently the stability
attributes cannot handle a stable trait with an unstable `impl` block. This
commit also audits the rest of the standard library for explicitly-`#[unstable]`
impl blocks. No others were removed but some annotations were changed to
`#[stable]` as they're defacto stable anyway.
One particularly interesting `impl` marked `#[stable]` as part of this commit
is the `Add<&[T]>` impl for `Vec<T>`, which uses `push_all` and implicitly
clones all elements of the vector provided.
Closes#24791
[breaking-change]
These implementations were intended to be unstable, but currently the stability
attributes cannot handle a stable trait with an unstable `impl` block. This
commit also audits the rest of the standard library for explicitly-`#[unstable]`
impl blocks. No others were removed but some annotations were changed to
`#[stable]` as they're defacto stable anyway.
One particularly interesting `impl` marked `#[stable]` as part of this commit
is the `Add<&[T]>` impl for `Vec<T>`, which uses `push_all` and implicitly
clones all elements of the vector provided.
Closes#24791
- unbreak the build under openbsd
- while here, apply same modification to dragonfly, freebsd, ios (pid_t
imported, but not used in raw.rs)
r? @alexcrichton
cc @wg @mneumann @vhbit
This commit brings the `Error` trait in line with the [Error interoperation
RFC](https://github.com/rust-lang/rfcs/pull/201) by adding downcasting,
which has long been intended. This change means that for any `Error`
trait objects that are `'static`, you can downcast to concrete error
types.
To make this work, it is necessary for `Error` to inherit from
`Reflect` (which is currently used to mark concrete types as "permitted
for reflection, aka downcasting"). This is a breaking change: it means
that impls like
```rust
impl<T> Error for MyErrorType<T> { ... }
```
must change to something like
```rust
impl<T: Reflect> Error for MyErrorType<T> { ... }
```
except that `Reflect` is currently unstable (and should remain so for
the time being). For now, code can instead bound by `Any`:
```rust
impl<T: Any> Error for MyErrorType<T> { ... }
```
which *is* stable and has `Reflect` as a super trait. The downside is
that this imposes a `'static` constraint, but that only
constrains *when* `Error` is implemented -- it does not actually
constrain the types that can implement `Error`.
[breaking-change]
Apparently implementations are allowed to return EDEADLK instead of blocking
forever, in which case this can lead to unsafety in the `RwLock` primitive
exposed by the standard library. A debug-build of the standard library would
have caught this error (due to the debug assert), but we don't ship debug
builds right now.
This commit adds explicit checks for the EDEADLK error code and triggers a panic
to ensure the call does not succeed.
Closes#25012
As pointed out in #17136 the semantics of a `BufStream` aren't always what one
expects, and it looks like other [languages like C#][c-sharp] implement a
buffered stream with only one underlying buffer. For now this commit
destabilizes the primitive in the `std::io` module to give us some more time in
figuring out what to do with it.
[c-sharp]: https://msdn.microsoft.com/en-us/library/system.io.bufferedstream%28v=vs.110%29.aspx
[breaking-change]
Changes made include adding missing punctuation, adding missing words, and converting uses of "Gets" to "Returns" in libstd/net/addr.rs to make it more consistent with the other documentation.
Fixes#24925.
`call_once` guarantees that there is a happens-before relationship between its closure and code following it via the sequentially consistent atomic store/loads of `self.cnt`.
This commit is an implementation of [RFC 1044][rfc] which adds additional
surface area to the `std::fs` module. All new APIs are `#[unstable]` behind
assorted feature names for each one.
[rfc]: https://github.com/rust-lang/rfcs/pull/1044
The new APIs added are:
* `fs::canonicalize` - bindings to `realpath` on unix and
`GetFinalPathNameByHandle` on windows.
* `fs::symlink_metadata` - similar to `lstat` on unix
* `fs::FileType` and accessor methods as `is_{file,dir,symlink}`
* `fs::Metadata::file_type` - accessor for the raw file type
* `fs::DirEntry::metadata` - acquisition of metadata which is free on Windows
but requires a syscall on unix.
* `fs::DirEntry::file_type` - access the file type which may not require a
syscall on most platforms.
* `fs::DirEntry::file_name` - access just the file name without leading
components.
* `fs::PathExt::symlink_metadata` - convenience method for the top-level
function.
* `fs::PathExt::canonicalize` - convenience method for the top-level
function.
* `fs::PathExt::read_link` - convenience method for the top-level
function.
* `fs::PathExt::read_dir` - convenience method for the top-level
function.
* `std::os::raw` - type definitions for raw OS/C types available on all
platforms.
* `std::os::$platform` - new modules have been added for all currently supported
platforms (e.g. those more specific than just `unix`).
* `std::os::$platform::raw` - platform-specific type definitions. These modules
are populated with the bare essentials necessary for lowing I/O types into
their raw representations, and currently largely consist of the `stat`
definition for unix platforms.
This commit also deprecates `Metadata::{modified, accessed}` in favor of
inspecting the raw representations via the lowering methods of `Metadata`.
Closes https://github.com/rust-lang/rust/issues/24796
This adds some missing punctuation and converts uses of "Gets" to
"Returns". This sounds better to my ear, but more importantly is
more consistent with the documentation from other files.
This adds some missing punctuation, adds a missing word, and
corrects a bug in the description of `send_to`, which actually
returns the number of bytes written on success.
Fixes#24925.
Currently if a standard I/O handle is set to inherited on Windows, no action is
taken and the slot in the process information description is set to
`INVALID_HANDLE_VALUE`. Due to our passing of `STARTF_USESTDHANDLES`, however,
this means that the handle is actually set to nothing and if a child tries to
print it will generate an error.
This commit fixes this behavior by explicitly creating stdio handles to be
placed in these slots by duplicating the current process's I/O handles. This is
presumably what previously happened silently by using a file-descriptor-based
implementation instead of a `HANDLE`-centric implementation.
Along the way this cleans up a lot of code in `Process::spawn` for Windows by
ensuring destructors are always run, using more RAII, and limiting the scope of
`unsafe` wherever possible.
These commits build on [some great work on reddit](http://www.reddit.com/r/rust/comments/33boew/weekend_experiment_link_rust_programs_against/) for adding MUSL support to the compiler. This goal of this PR is to enable a `--target x86_64-unknown-linux-musl` argument to the compiler to work A-OK. The outcome here is that there are 0 compile-time dependencies for a MUSL-targeting build *except for a linker*. Currently this also assumes that MUSL is being used for statically linked binaries so there is no support for dynamically linked binaries with MUSL.
MUSL support largely just entailed munging around with the linker and where libs are located, and the major highlights are:
* The entirety of `libc.a` is included in `liblibc.rlib` (statically included as an archive).
* The entirety of `libunwind.a` is included in `libstd.rlib` (like with liblibc).
* The target specification for MUSL passes a number of ... flavorful options! Each option is documented in the relevant commit.
* The entire test suite currently passes with MUSL as a target, except for:
* Dynamic linking tests are all ignored as it's not supported with MUSL
* Stack overflow detection is not working MUSL yet (I'm not sure why)
* There is a language change included in this PR to add a `target_env` `#[cfg]` directive. This is used to conditionally build code for only MUSL (or for linux distros not MUSL). I highly suspect that this will also be used by Windows to target MSVC instead of a MinGW-based toolchain.
To build a compiler targeting MUSL you need to follow these steps:
1. Clone the current MUSL repo from `git://git.musl-libc.org/musl`. Build this as usual and install it.
2. Clone and build LLVM's [libcxxabi](http://libcxxabi.llvm.org/) library. Only the `libunwind.a` artifact is needed. I have tried using upstream libunwind's source repo but I have not gotten unwinding to work with it unfortunately. Move `libunwind.a` adjacent to MUSL's `libc.a`
3. Configure a Rust checkout with `--target=x86_64-unknown-linux-musl --musl-root=$MUSL_ROOT` where `MUSL_ROOT` is where you installed MUSL in step 1.
I hope to improve building a copy of libunwind as it's still a little sketchy and difficult to do today, but other than that everything should "just work"! This PR is not intended to include 100% comprehensive support for MUSL, as future modifications will probably be necessary.
This commit is an implementation of [RFC 1044][rfc] which adds additional
surface area to the `std::fs` module. All new APIs are `#[unstable]` behind
assorted feature names for each one.
[rfc]: https://github.com/rust-lang/rfcs/pull/1044
The new APIs added are:
* `fs::canonicalize` - bindings to `realpath` on unix and
`GetFinalPathNameByHandle` on windows.
* `fs::symlink_metadata` - similar to `lstat` on unix
* `fs::FileType` and accessor methods as `is_{file,dir,symlink}`
* `fs::Metadata::file_type` - accessor for the raw file type
* `fs::DirEntry::metadata` - acquisition of metadata which is free on Windows
but requires a syscall on unix.
* `fs::DirEntry::file_type` - access the file type which may not require a
syscall on most platforms.
* `fs::DirEntry::file_name` - access just the file name without leading
components.
* `fs::PathExt::symlink_metadata` - convenience method for the top-level
function.
* `fs::PathExt::canonicalize` - convenience method for the top-level
function.
* `fs::PathExt::read_link` - convenience method for the top-level
function.
* `fs::PathExt::read_dir` - convenience method for the top-level
function.
* `std::os::raw` - type definitions for raw OS/C types available on all
platforms.
* `std::os::$platform` - new modules have been added for all currently supported
platforms (e.g. those more specific than just `unix`).
* `std::os::$platform::raw` - platform-specific type definitions. These modules
are populated with the bare essentials necessary for lowing I/O types into
their raw representations, and currently largely consist of the `stat`
definition for unix platforms.
This commit also deprecates `Metadata::{modified, accessed}` in favor of
inspecting the raw representations via the lowering methods of `Metadata`.
Inspecting the current thread's info may not always work due to the TLS value
having been destroyed (or is actively being destroyed). The code for printing
a panic message assumed, however, that it could acquire the thread's name
through this method.
Instead this commit propagates the `Option` outwards to allow the
`std::panicking` module to handle the case where the current thread isn't
present.
While it solves the immediate issue of #24313, there is still another underlying
issue of panicking destructors in thread locals will abort the process.
Closes#24313
This commit modifies the standard library and its dependencies to link correctly
when built against MUSL. This primarily ensures that the right libraries are
linked against and when they're linked against they're linked against
statically.
Fix `make_command_line` for the case of backslashes at the end of an
argument requiring quotes. We must encode the command and arguments
such that `CommandLineToArgvW` recovers them in the spawned process.
Simplify the logic by using a running count of backslashes as they
are encountered instead of looking ahead for quotes following them.
Extend `test_make_command_line` to additionally cover:
* a leading quote in an argument that requires quotes,
* a backslash before a quote in an argument that requires quotes,
* a backslash at the end of an argument that requires quotes, and
* a backslash at the end of an argument that does not require quotes.
Fix `make_command_line` for the case of backslashes at the end of an
argument requiring quotes. We must encode the command and arguments
such that `CommandLineToArgvW` recovers them in the spawned process.
Simplify the logic by using a running count of backslashes as they
are encountered instead of looking ahead for quotes following them.
Extend `test_make_command_line` to additionally cover:
* a leading quote in an argument that requires quotes,
* a backslash before a quote in an argument that requires quotes,
* a backslash at the end of an argument that requires quotes, and
* a backslash at the end of an argument that does not require quotes.
These functions were intended to be introduced as `#[stable]` as a stable API
was deprecated in favor of them, but they just erroneously forgot the stability
attributes.
Changes the style guidelines regarding unit tests to recommend using a
sub-module named "tests" instead of "test" for unit tests as "test"
might clash with imports of libtest.
`ToCStr` was removed with `old_io` and the current method `as_os_str`
is inherent to `Path`, meaning there is no suitable trait bound that
could be used here.
r? @alexcrichton
These functions were intended to be introduced as `#[stable]` as a stable API
was deprecated in favor of them, but they just erroneously forgot the stability
attributes.
`ToCStr` was removed with `old_io` and the current method `as_os_str`
is inherent to `Path`, meaning there is no suitable trait bound that
could be used here.
Much of this code hasn't been updated in quite some time and this commit does a
small audit of the functionality:
* Implementation functions now centralize all functionality on a locally defined
`Thread` type.
* The `detach` method has been removed in favor of a `Drop` implementation. This
notably fixes leaking thread handles on Windows.
* The `Thread` structure is now appropriately annotated with `Send` and `Sync`
automatically on Windows and in a custom fashion on Unix.
* The unsafety of creating a thread has been pushed out to the right boundaries
now.
Closes#24442
Much of this code hasn't been updated in quite some time and this commit does a
small audit of the functionality:
* Implementation functions now centralize all functionality on a locally defined
`Thread` type.
* The `detach` method has been removed in favor of a `Drop` implementation. This
notably fixes leaking thread handles on Windows.
* The `Thread` structure is now appropriately annotated with `Send` and `Sync`
automatically on Windows and in a custom fashion on Unix.
* The unsafety of creating a thread has been pushed out to the right boundaries
now.
Closes#24442
This is an implementation of [RFC 1030][rfc] which adds these traits to the
prelude and additionally removes all inherent `into_iter` methods on collections
in favor of the trait implementation (which is now accessible by default).
[rfc]: https://github.com/rust-lang/rfcs/pull/1030
This is technically a breaking change due to the prelude additions and removal
of inherent methods, but it is expected that essentially no code breaks in
practice.
[breaking-change]
Closes#24538
Implement [RFC #1048][rfc].
On Windows, when you create a symbolic link you must specify whether it
points to a directory or a file, even if it is created dangling, while
on Unix, the same symbolic link could point to a directory, a file, or
nothing at all. Furthermore, on Windows special privilege is necessary
to use a symbolic link, while on Unix, you can generally create a
symbolic link in any directory you have write privileges to.
This means that it is unlikely to be able to use symbolic links purely
portably; anyone who uses them will need to think about the cross
platform implications. This means that using platform-specific APIs
will make it easier to see where code will need to differ between the
platforms, rather than trying to provide some kind of compatibility
wrapper.
Furthermore, `soft_link` has no precedence in any other API, so to avoid
confusion, move back to the more standard `symlink` terminology.
Create a `std::os::unix::symlink` for the Unix version that is
destination type agnostic, as well as `std::os::windows::{symlink_file,
symlink_dir}` for Windows.
Because this is a stable API, leave a compatibility wrapper in
`std::fs::soft_link`, which calls `symlink` on Unix and `symlink_file`
on Windows, preserving the existing behavior of `soft_link`.
[rfc]: https://github.com/rust-lang/rfcs/pull/1048
This commit removes all the old casting/generic traits from `std::num` that are
no longer in use by the standard library. This additionally removes the old
`strconv` module which has not seen much use in quite a long time. All generic
functionality has been supplanted with traits in the `num` crate and the
`strconv` module is supplanted with the [rust-strconv crate][rust-strconv].
[rust-strconv]: https://github.com/lifthrasiir/rust-strconv
This is a breaking change due to the removal of these deprecated crates, and the
alternative crates are listed above.
[breaking-change]
On Windows, when you create a symbolic link you must specify whether it
points to a directory or a file, even if it is created dangling, while
on Unix, the same symbolic link could point to a directory, a file, or
nothing at all. Furthermore, on Windows special privilege is necessary
to use a symbolic link, while on Unix, you can generally create a
symbolic link in any directory you have write privileges to.
This means that it is unlikely to be able to use symbolic links purely
portably; anyone who uses them will need to think about the cross
platform implications. This means that using platform-specific APIs
will make it easier to see where code will need to differ between the
platforms, rather than trying to provide some kind of compatibility
wrapper.
Furthermore, `soft_link` has no precedence in any other API, so to avoid
confusion, move back to the more standard `symlink` terminology.
Create a `std::os::unix::symlink` for the Unix version that is
destination type agnostic, as well as `std::os::windows::{symlink_file,
symlink_dir}` for Windows.
Because this is a stable API, leave a compatibility wrapper in
`std::fs::soft_link`, which calls `symlink` on Unix and `symlink_file`
on Windows, preserving the existing behavior of `soft_link`.
This patch adds a `Debug` impl for `std::fs::File`.
On all platforms (Unix and Windows) it shows the file descriptor.
On Linux, it displays the path and access mode as well.
Ideally we should show the path/mode for all platforms, not just Linux,
but this will do for now.
cc #24570
It's just as convenient, but it's much faster. Using write! requires an
extra call to fmt::write and a extra dynamically dispatched call to
Arguments' Display format function.
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
This allows `io::Error` values to be stored in `Arc` properly.
Because this requires `Sync` of any value passed to `io::Error::new()`
and modifies the relevant `convert::From` impls, this is a
[breaking-change]
Fixes#24049.
This is an implementation of [RFC 1030][rfc] which adds these traits to the
prelude and additionally removes all inherent `into_iter` methods on collections
in favor of the trait implementation (which is now accessible by default).
[rfc]: https://github.com/rust-lang/rfcs/pull/1030
This is technically a breaking change due to the prelude additions and removal
of inherent methods, but it is expected that essentially no code breaks in
practice.
[breaking-change]
Closes#24538
It's just as convenient, but it's much faster. Using write! requires an
extra call to fmt::write and a extra dynamically dispatched call to
Arguments' Display format function.
This patch
1. renames libunicode to librustc_unicode,
2. deprecates several pieces of libunicode (see below), and
3. removes references to deprecated functions from
librustc_driver and libsyntax. This may change pretty-printed
output from these modules in cases involving wide or combining
characters used in filenames, identifiers, etc.
The following functions are marked deprecated:
1. char.width() and str.width():
--> use unicode-width crate
2. str.graphemes() and str.grapheme_indices():
--> use unicode-segmentation crate
3. str.nfd_chars(), str.nfkd_chars(), str.nfc_chars(), str.nfkc_chars(),
char.compose(), char.decompose_canonical(), char.decompose_compatible(),
char.canonical_combining_class():
--> use unicode-normalization crate
One of the parameters to the magical "register a thread-local destructor"
function is called `__dso_handle` and largely just passed along (this seems to
be what other implementations do). Currently we pass the *value* of this symbol,
but apparently the correct piece of information to pass is the *address* of the
symbol.
In a PIE binary the symbol actually contains an address to itself which is why
we've gotten away with what we're doing as long as we have. In a non-PIE binary
the symbol contains the address `NULL`, causing a segfault in the runtime
library if it keeps going.
Closes#24445
One of the parameters to the magical "register a thread-local destructor"
function is called `__dso_handle` and largely just passed along (this seems to
be what other implementations do). Currently we pass the *value* of this symbol,
but apparently the correct piece of information to pass is the *address* of the
symbol.
In a PIE binary the symbol actually contains an address to itself which is why
we've gotten away with what we're doing as long as we have. In a non-PIE binary
the symbol contains the address `NULL`, causing a segfault in the runtime
library if it keeps going.
Closes#24445
This commit removes the last remnants of file descriptors from the Windows
implementation of `std::sys` by using `CreatePipe` to create anonymous pipes
instead of the `pipe` shim provided in msvcrt.
