Added two fixmes: The `SimplifyBranches` pass cannot stay where it is,
and `BorrowckMir` should be a query, not a pass. But I am going to
leave those changes to a future PR.
One can either use `-Z borrowck-mir` or add the `#[rustc_mir_borrowck]` attribute
to opt into MIR based borrow checking.
Note that regardless of whether one opts in or not, AST-based borrow
check will still run as well. The errors emitted from AST-based
borrow check will include a "(Ast)" suffix in their error message,
while the errors emitted from MIR-based borrow check will include a
"(Mir)" suffix.
post-rebase: removed check for intra-statement mutual conflict;
replaced with assertion checking that at most one borrow is generated
per statement.
post-rebase: removed dead code: `IdxSet::pairs` and supporting stuff.
Use hir::ItemLocalId as keys in TypeckTables.
This PR makes `TypeckTables` use `ItemLocalId` instead of `NodeId` as key. This is needed for incremental compilation -- for stable hashing and for being able to persist and reload these tables. The PR implements the most important part of https://github.com/rust-lang/rust/issues/40303.
Some notes on the implementation:
* The PR adds the `HirId` to HIR nodes where needed (`Expr`, `Local`, `Block`, `Pat`) which obviates the need to store a `NodeId -> HirId` mapping in crate metadata. Thanks @eddyb for the suggestion! In the future the `HirId` should completely replace the `NodeId` in HIR nodes.
* Before something is read or stored in one of the various `TypeckTables` subtables, the entry's key is validated via the new `TypeckTables::validate_hir_id()` method. This makes sure that we are not mixing information from different items in a single table.
That last part could be made a bit nicer by either (a) new-typing the table-key and making `validate_hir_id()` the only way to convert a `HirId` to the new-typed key, or (b) just encapsulate sub-table access a little better. This PR, however, contents itself with not making things significantly worse.
Also, there's quite a bit of switching around between `NodeId`, `HirId`, and `DefIndex`. These conversions are cheap except for `HirId -> NodeId`, so if the valued reviewer finds such an instance in a performance critical place, please let me know.
Ideally we convert more and more code from `NodeId` to `HirId` in the future so that there are no more `NodeId`s after HIR lowering anywhere. Then the amount of switching should be minimal again.
r? @eddyb, maybe?
Cleanup for "Support compiling rustc without LLVM (try 2)"
This includes a small patch to allow running tests without llvm. Also check if you are not trying to compile a dylib.
cc #42932
r? @alexcrichton
Expose all OS-specific modules in libstd doc.
1. Uses the special `--cfg dox` configuration passed by rustbuild when running `rustdoc`. Changes the `#[cfg(platform)]` into `#[cfg(any(dox, platform))]` so that platform-specific API are visible to rustdoc.
2. Since platform-specific implementations often won't compile correctly on other platforms, `rustdoc` is changed to apply `everybody_loops` to the functions during documentation and doc-test harness.
3. Since platform-specific code are documented on all platforms now, it could confuse users who found a useful API but is non-portable. Also, their examples will be doc-tested, so must be excluded when not testing on the native platform. An undocumented attribute `#[doc(cfg(...))]` is introduced to serve the above purposed.
Fixes#24658 (Does _not_ fully implement #1998).
AddValidation: handle Call terminators into blocks that have multiple incoming edges
The old code was just wrong: It would add validation on paths that don't even come from the call, and it would add multiple validations if multiple calls end return to the same block.
rustc: Rearchitect lints to be emitted more eagerly
In preparation for incremental compilation this commit refactors the lint
handling infrastructure in the compiler to be more "eager" and overall more
incremental-friendly. Many passes of the compiler can emit lints at various
points but before this commit all lints were buffered in a table to be emitted
at the very end of compilation. This commit changes these lints to be emitted
immediately during compilation using pre-calculated lint level-related data
structures.
Linting today is split into two phases, one set of "early" lints run on the
`syntax::ast` and a "late" set of lints run on the HIR. This commit moves the
"early" lints to running as late as possible in compilation, just before HIR
lowering. This notably means that we're catching resolve-related lints just
before HIR lowering. The early linting remains a pass very similar to how it was
before, maintaining context of the current lint level as it walks the tree.
Post-HIR, however, linting is structured as a method on the `TyCtxt` which
transitively executes a query to calculate lint levels. Each request to lint on
a `TyCtxt` will query the entire crate's 'lint level data structure' and then go
from there about whether the lint should be emitted or not.
The query depends on the entire HIR crate but should be very quick to calculate
(just a quick walk of the HIR) and the red-green system should notice that the
lint level data structure rarely changes, and should hopefully preserve
incrementality.
Overall this resulted in a pretty big change to the test suite now that lints
are emitted much earlier in compilation (on-demand vs only at the end). This in
turn necessitated the addition of many `#![allow(warnings)]` directives
throughout the compile-fail test suite and a number of updates to the UI test
suite.
Closes https://github.com/rust-lang/rust/issues/42511
Fixed mutable vars being marked used when they weren't
#### NB : bootstrapping is slow on my machine, even with `keep-stage` - fixes for occurances in the current codebase are <s>in the pipeline</s> done. This PR is being put up for review of the fix of the issue.
Fixes#43526, Fixes#30280, Fixes#25049
### Issue
Whenever the compiler detected a mutable deref being used mutably, it marked an associated value as being used mutably as well. In the case of derefencing local variables which were mutable references, this incorrectly marked the reference itself being used mutably, instead of its contents - with the consequence of making the following code emit no warnings
```
fn do_thing<T>(mut arg : &mut T) {
... // don't touch arg - just deref it to access the T
}
```
### Fix
Make dereferences not be counted as a mutable use, but only when they're on borrows on local variables.
#### Why not on things other than local variables?
* Whenever you capture a variable in a closure, it gets turned into a hidden reference - when you use it in the closure, it gets dereferenced. If the closure uses the variable mutably, that is actually a mutable use of the thing being dereffed to, so it has to be counted.
* If you deref a mutable `Box` to access the contents mutably, you are using the `Box` mutably - so it has to be counted.
This prevents compilation failure we want to document a platform-specific
module. Every function is replaced by `loop {}` using the same construct
as `--unpretty everybody_loops`.
Note also a workaround to #43636 is included: `const fn` will retain their
bodies, since the standard library has quite a number of them.
In preparation for incremental compilation this commit refactors the lint
handling infrastructure in the compiler to be more "eager" and overall more
incremental-friendly. Many passes of the compiler can emit lints at various
points but before this commit all lints were buffered in a table to be emitted
at the very end of compilation. This commit changes these lints to be emitted
immediately during compilation using pre-calculated lint level-related data
structures.
Linting today is split into two phases, one set of "early" lints run on the
`syntax::ast` and a "late" set of lints run on the HIR. This commit moves the
"early" lints to running as late as possible in compilation, just before HIR
lowering. This notably means that we're catching resolve-related lints just
before HIR lowering. The early linting remains a pass very similar to how it was
before, maintaining context of the current lint level as it walks the tree.
Post-HIR, however, linting is structured as a method on the `TyCtxt` which
transitively executes a query to calculate lint levels. Each request to lint on
a `TyCtxt` will query the entire crate's 'lint level data structure' and then go
from there about whether the lint should be emitted or not.
The query depends on the entire HIR crate but should be very quick to calculate
(just a quick walk of the HIR) and the red-green system should notice that the
lint level data structure rarely changes, and should hopefully preserve
incrementality.
Overall this resulted in a pretty big change to the test suite now that lints
are emitted much earlier in compilation (on-demand vs only at the end). This in
turn necessitated the addition of many `#![allow(warnings)]` directives
throughout the compile-fail test suite and a number of updates to the UI test
suite.
Add MIR Validate statement
This adds statements to MIR that express when types are to be validated (following [Types as Contracts](https://internals.rust-lang.org/t/types-as-contracts/5562)). Obviously nothing is stabilized, and in fact a `-Z` flag has to be passed for behavior to even change at all.
This is meant to make experimentation with Types as Contracts in miri possible. The design is definitely not final.
Cc @nikomatsakis @aturon
