Makes labelled loops hygiene by performing renaming of the labels
defined in e.g. `'x: loop { ... }` and then used in break and continue
statements within loop body so that they act hygienically when used with
macros.
Closes#12262.
With the stability attributes we can put public-but unstable modules next to others, so this moves `intrinsics` and `raw` out of the `unstable` module (and marks both as `#[experimental]`).
These two containers are indeed collections, so their place is in
libcollections, not in libstd. There will always be a hash map as part of the
standard distribution of Rust, but by moving it out of the standard library it
makes libstd that much more portable to more platforms and environments.
This conveniently also removes the stuttering of 'std::hashmap::HashMap',
although 'collections::HashMap' is only one character shorter.
This PR merges `IterBytes` and `Hash` into a trait that allows for generic non-stream-based hashing. It makes use of @eddyb's default type parameter support in order to have a similar usage to the old `Hash` framework.
Fixes#8038.
Todo:
- [x] Better documentation
- [ ] Benchmark
- [ ] Parameterize `HashMap` on a `Hasher`.
Fixes#12350.
Parentheses around assignment statements such as
```rust
let mut a = (0);
a = (1);
a += (2);
```
are not necessary and therefore an unnecessary_parens warning is raised when
statements like this occur.
NOTE: In `let` declarations this does not work as intended. Is it possible that they do not count as assignment expressions (`ExprAssign`)? (edit: this is fixed by now)
Furthermore, there are some cases that I fixed in the rest of the code, where parentheses could potentially enhance readability. Compare these lines:
```rust
a = b == c;
a = (b == c);
```
Thus, after having worked on this I'm not entirely sure, whether we should go through with this patch or not. Probably a matter of debate. ;)
Not all of those messages are covered by tests. I am not sure how to trigger them and where to put those tests.
Also some message patterns in the existing tests are not complete.
For example, i find `error: mismatched types: expected "i32" but found "char" (expected i32 but found char)` a bit repetitive, but as i can see there is no test covering that.
Closes#12366.
Parentheses around assignment statements such as
let mut a = (0);
a = (1);
a += (2);
are not necessary and therefore an unnecessary_parens warning is raised when
statements like this occur.
The warning mechanism was refactored along the way to allow for code reuse
between the routines for checking expressions and statements.
Code had to be adopted throughout the compiler and standard libraries to comply
with this modification of the lint.
Travis CI provides an easy-to-use continuous integration infrastructure for
github repos to use. Travis will automatically test all PRs which are opened
against the rust repository, informing PR owners of the test results.
I believe that this will be a very convenient piece of infrastructure as we'll
be able to reduce the load on bors quite a bit. In theory all PRs opened have
had the full test suite run against them, but unfortunately this is rarely the
case (I'm a prime suspect). Travis will be able to provide easy and relatively
quick (~30min) feedback for PRs. By ensuring fewer failures on bors, we can
hopefully feed more successful jobs to bors.
Overall, I expect this to be very helpful for new contributors as well as
regular contributors as it's another layer of tests being run which will
hopefully catch things sooner. One of the most convenient parts about using
Travis is that there's very little burden in terms of maintenance, and if things
go wrong we can easily turn travis completely off.
Note that this is *not* the metric by which a PR will be merged with. Using
travis will purely be another source for running tests, we will continue to gate
all PRs on bors.
This patch merges IterBytes and Hash traits, which clears up the
confusion of using `#[deriving(IterBytes)]` to support hashing.
Instead, it now is much easier to use the new `#[deriving(Hash)]`
for making a type hashable with a stream hash.
Furthermore, it supports custom non-stream-based hashers, such as
if a value's hash was cached in a database.
This does not yet replace the old IterBytes-hash with this new
version.
Previously an `unsafe` block created by the compiler (like those in the
formatting macros) would be "ignored" if surrounded by `unsafe`, that
is, the internal unsafety would be being legitimised by the external
block:
unsafe { println!("...") } =(expansion)=> unsafe { ... unsafe { ... } }
And the code in the inner block would be using the outer block, making
it considered used (and the inner one considered unused).
This patch forces the compiler to create a new unsafe context for
compiler generated blocks, so that their internal unsafety doesn't
escape to external blocks.
Fixes#12418.
Added allow(non_camel_case_types) to librustc where necesary
Tried to fix problems with non_camel_case_types outside rustc
fixed failing tests
Docs updated
Moved #[allow(non_camel_case_types)] a level higher.
markdown.rs reverted
Fixed timer that was failing tests
Fixed another timer
Travis CI provides an easy-to-use continuous integration infrastructure for
github repos to use. Travis will automatically test all PRs which are opened
against the rust repository, informing PR owners of the test results.
I believe that this will be a very convenient piece of infrastructure as we'll
be able to reduce the load on bors quite a bit. In theory all PRs opened have
had the full test suite run against them, but unfortunately this is rarely the
case (I'm a prime suspect). Travis will be able to provide easy and relatively
quick (~30min) feedback for PRs. By ensuring fewer failures on bors, we can
hopefully feed more successful jobs to bors.
Overall, I expect this to be very helpful for new contributors as well as
regular contributors as it's another layer of tests being run which will
hopefully catch things sooner. One of the most convenient parts about using
Travis is that there's very little burden in terms of maintenance, and if things
go wrong we can easily turn travis completely off.
Note that this is *not* the metric by which a PR will be merged with. Using
travis will purely be another source for running tests, we will continue to gate
all PRs on bors.
This commit rewrites crate loading internally in attempt to look at less
metadata and provide nicer errors. The loading is now split up into a few
stages:
1. Collect a mapping of (hash => ~[Path]) for a set of candidate libraries for a
given search. The hash is the hash in the filename and the Path is the
location of the library in question. All candidates are filtered based on
their prefix/suffix (dylib/rlib appropriate) and then the hash/version are
split up and are compared (if necessary).
This means that if you're looking for an exact hash of library you don't have
to open up the metadata of all libraries named the same, but also in your
path.
2. Once this mapping is constructed, each (hash, ~[Path]) pair is filtered down
to just a Path. This is necessary because the same rlib could show up twice
in the path in multiple locations. Right now the filenames are based on just
the crate id, so this could be indicative of multiple version of a crate
during one crate_id lifetime in the path. If multiple duplicate crates are
found, an error is generated.
3. Now that we have a mapping of (hash => Path), we error on multiple versions
saying that multiple versions were found. Only if there's one (hash => Path)
pair do we actually return that Path and its metadata.
With this restructuring, it restructures code so errors which were assertions
previously are now first-class errors. Additionally, this should read much less
metadata with lots of crates of the same name or same version in a path.
Closes#11908
The new methodology can be found in the re-worded comment, but the gist of it is
that -C prefer-dynamic doesn't turn off static linkage. The error messages
should also be a little more sane now.
Closes#12133
Previously an `unsafe` block created by the compiler (like those in the
formatting macros) would be "ignored" if surrounded by `unsafe`, that
is, the internal unsafety would be being legitimised by the external
block:
unsafe { println!("...") } =(expansion)=> unsafe { ... unsafe { ... } }
And the code in the inner block would be using the outer block, making
it considered used (and the inner one considered unused).
This patch forces the compiler to create a new unsafe context for
compiler generated blocks, so that their internal unsafety doesn't
escape to external blocks.
Fixes#12418.
The new methodology can be found in the re-worded comment, but the gist of it is
that -C prefer-dynamic doesn't turn off static linkage. The error messages
should also be a little more sane now.
Closes#12133
Closes#11692. Instead of returning the original expression, a dummy expression
(with identical span) is returned. This prevents infinite loops of failed
expansions as well as odd double error messages in certain situations.
This is a slightly better fix than #12197, because it does not produce a double error and also fixes a few other cases where an infinite loop could happen.
This does not fix the other issue in #11692 (non-builtin macros not being recognised when expanded inside macros), which I think should be moved into a separate issue.
With Rc no longer trying to statically prevent cycles (and thus no
longer using the Freeze bound), it seems appropriate to remove that
restriction from MutexArc as well.
Closes#9251.
Closes#11692. Instead of returning the original expression, a dummy expression
(with identical span) is returned. This prevents infinite loops of failed
expansions as well as odd double error messages in certain situations.
This patch gets rid of ObsoleteExternModAttributesInParens and
ObsoleteNamedExternModule since the replacement of `extern mod` with
`extern crate` avoids those cases and raises different errors. Both have
been around for at least a version which makes this a good moment to get
rid of them.
This patch adds a new keyword `crate` which is intended to replace mod
in the context of `extern mod` as part of the issue #9880. The patch
doesn't replace all `extern mod` cases since it is necessary to first
push a new snapshot 0.
The implementation could've been less invasive than this. However I
preferred to take this chance to split the `parse_item_foreign_mod`
method and pull the `extern crate` part out of there, hence the new
method `parse_item_foreign_crate`.
While working on #11363 I stumbled over a couple of ignored tests, that seem to be fixed or invalid.
* src/test/run-pass/issue-3559.rs was fixed in #4726
* src/test/compile-fail/borrowck-call-sendfn.rs was fixed in #2978
* update src/test/compile-fail/issue-5500-1.rs to work with current Rust (I'm not 100% sure if the original condition is tested as mentioned in #5500, but I think so)
* removed src/test/compile-fail/issue-5500.rs because it is tested in
src/test/run-fail/issue-5500.rs (they are the same test cases, I just renamed src/test/run-fail/addr-of-bot.rs to be consistent with the other issue name
* src/test/run-pass/issue-3559.rs was fixed in #4726
* src/test/compile-fail/borrowck-call-sendfn.rs was fixed in #2978
* update src/test/compile-fail/issue-5500-1.rs to work with current Rust
* removed src/test/compile-fail/issue-5500.rs because it is tested in
src/test/run-fail/issue-5500.rs
* src/test/compile-fail/view-items-at-top.rs fixed
* #897 fixed
* compile-fail/issue-6762.rs issue was closed as dup of #6801
* deleted compile-fail/issue-2074.rs because it became irelevant and is
irrelevant #2074, a test covering this was added in
4f92f452bd
Loadable syntax extensions don't work when cross compiling (see #12102), so the
fourcc tests all need to be ignored. They're valuable tests, so they shouldn't
be outright ignored, so they're now flagged with ignore-cross-compile
This, the Nth rewrite of channels, is not a rewrite of the core logic behind
channels, but rather their API usage. In the past, we had the distinction
between oneshot, stream, and shared channels, but the most recent rewrite
dropped oneshots in favor of streams and shared channels.
This distinction of stream vs shared has shown that it's not quite what we'd
like either, and this moves the `std::comm` module in the direction of "one
channel to rule them all". There now remains only one Chan and one Port.
This new channel is actually a hybrid oneshot/stream/shared channel under the
hood in order to optimize for the use cases in question. Additionally, this also
reduces the cognitive burden of having to choose between a Chan or a SharedChan
in an API.
My simple benchmarks show no reduction in efficiency over the existing channels
today, and a 3x improvement in the oneshot case. I sadly don't have a
pre-last-rewrite compiler to test out the old old oneshots, but I would imagine
that the performance is comparable, but slightly slower (due to atomic reference
counting).
This commit also brings the bonus bugfix to channels that the pending queue of
messages are all dropped when a Port disappears rather then when both the Port
and the Chan disappear.
Loadable syntax extensions don't work when cross compiling (see #12102), so the
fourcc tests all need to be ignored. They're valuable tests, so they shouldn't
be outright ignored, so they're now flagged with ignore-cross-compile
This resolves issue #12157. Does that do it already or is there something else that needs taking care of?
As a side note, there seems to be some documentation, in which the old existence of the do keyword is explained. The list of keywords is not up-to-date either. But these are certainly separate issues.
Resolves issue #12157. `do` is hereby reinstated as a keyword; no syntax is
associated with it though. Along the way, a unit test had to be adapted, since
it was using `do` as a method identifier.
Breaking changes:
- Any code using `do` as an identifier will no longer work.
The previous definition was actually describing covariance.
Fixing to describe contravariance while keeping 'static in the definition was tricky so just changed to use 'short and 'long.
Repair a rather embarassingly obvious hole that I created as part of #9629. In particular, prevent `&mut` borrows of data in an aliasable location. This used to be prevented through the restrictions mechanism, but in #9629 I modified those rules incorrectly.
r? @pcwalton
Fixes#11913
fourcc!() allows you to embed FourCC (or OSType) values that are
evaluated as u32 literals. It takes a 4-byte ASCII string and produces
the u32 resulting in interpreting those 4 bytes as a u32, using either
the platform-native endianness, or explicitly as big or little endian.
Error messages cleaned in librustc/middle
Error messages cleaned in libsyntax
Error messages cleaned in libsyntax more agressively
Error messages cleaned in librustc more aggressively
Fixed affected tests
Fixed other failing tests
Last failing tests fixed
This removes @[] from the parser as well as much of the handling of it (and `@str`) from the compiler as I can find.
I've just rebased @pcwalton's (already reviewed) `@str` removal (and fixed the problems in a separate commit); the only new work is the trailing commits with my authorship.
Closes#11967
This is has been obsolete for quite a while now (including a release),
so removing the special handling seems fine. (The error message is quite
good still anyway.)
Fixes#9580.
It was possible to trigger a stack overflow in rustc because the routine used to verify enum representability,
type_structurally_contains, would recurse on inner types until hitting the original type. The overflow condition was when a different structurally recursive type (enum or struct) was contained in the type being checked.
I suspect my solution isn't as efficient as it could be. I pondered adding a cache of previously-seen types to avoid duplicating work (if enums A and B both contain type C, my code goes through C twice), but I didn't want to do anything that may not be necessary.
I'm a new contributor, so please pay particular attention to any unidiomatic code, misuse of terminology, bad naming of tests, or similar horribleness :)
Updated to verify struct representability as well.
Fixes#3008.
Fixes#3779.
`Times::times` was always a second-class loop because it did not support the `break` and `continue` operations. Its playful appeal (which I liked) was then lost after `do` was disabled for closures. It's time to let this one go.
`Times::times` was always a second-class loop because it did not support the `break` and `continue` operations. Its playful appeal was then lost after `do` was disabled for closures. It's time to let this one go.
The general consensus is that we want to move away from conditions for I/O, and I propose a two-step plan for doing so:
1. Warn about unused `Result` types. When all of I/O returns `Result`, it will require you inspect the return value for an error *only if* you have a result you want to look at. By default, for things like `write` returning `Result<(), Error>`, these will all go silently ignored. This lint will prevent blind ignorance of these return values, letting you know that there's something you should do about them.
2. Implement a `try!` macro:
```
macro_rules! try( ($e:expr) => (match $e { Ok(e) => e, Err(e) => return Err(e) }) )
```
With these two tools combined, I feel that we get almost all the benefits of conditions. The first step (the lint) is a sanity check that you're not ignoring return values at callsites. The second step is to provide a convenience method of returning early out of a sequence of computations. After thinking about this for awhile, I don't think that we need the so-called "do-notation" in the compiler itself because I think it's just *too* specialized. Additionally, the `try!` macro is super lightweight, easy to understand, and works almost everywhere. As soon as you want to do something more fancy, my answer is "use match".
Basically, with these two tools in action, I would be comfortable removing conditions. What do others think about this strategy?
----
This PR specifically implements the `unused_result` lint. I actually added two lints, `unused_result` and `unused_must_use`, and the first commit has the rationale for why `unused_result` is turned off by default.
I attempted to implement the lint in two steps. My first attempt was a
default-warn lint about *all* unused results. While this attempt did indeed find
many possible bugs, I felt that the false-positive rate was too high to be
turned on by default for all of Rust.
My second attempt was to make unused-result a default-allow lint, but allow
certain types to opt-in to the notion of "you must use this". For example, the
Result type is now flagged with #[must_use]. This lint about "must use" types is
warn by default (it's different from unused-result).
The unused_must_use lint had a 100% hit rate in the compiler, but there's not
that many places that return Result right now. I believe that this lint is a
crucial step towards moving away from conditions for I/O (because all I/O will
return Result by default). I'm worried that this lint is a little too specific
to Result itself, but I believe that the false positive rate for the
unused_result lint is too high to make it useful when turned on by default.
cc #7621.
See the commit message. I'm not sure if we should merge this now, or wait until we can write `Clone::clone(x)` which will directly solve the above issue with perfect error messages.
This unfortunately changes an error like
error: mismatched types: expected `&&NotClone` but found `&NotClone`
into
error: type `NotClone` does not implement any method in scope named `clone`
Non-exhaustive change list:
* `self` is now present in argument lists (modulo type-checking code I don't trust myself to refactor)
* methods have the same calling convention as bare functions (including the self argument)
* the env param is gone from all bare functions (and methods), only used by closures and `proc`s
* bare functions can only be coerced to closures and `proc`s if they are statically resolved, as they now require creating a wrapper specific to that function, to avoid indirect wrappers (equivalent to `impl<..Args, Ret> Fn<..Args, Ret> for fn(..Args) -> Ret`) that might not be optimizable by LLVM and don't work for `proc`s
* refactored some `trans::closure` code, leading to the removal of `trans::glue::make_free_glue` and `ty_opaque_closure_ptr`
I'd forgotten to update them when I changed this a while ago; it now displays error messages linked to the struct/variant field, rather than the `#[deriving(Trait)]` line, for all traits.
This also adds a very large number of autogenerated tests. I can easily remove/tone down that commit if necessary.
This was the original intention of the privacy of structs, and it was
erroneously implemented before. A pub struct will now have default-pub fields,
and a non-pub struct will have default-priv fields. This essentially brings
struct fields in line with enum variants in terms of inheriting visibility.
As usual, extraneous modifiers to visibility are disallowed depend on the case
that you're dealing with.
Closes#11522
They all have to go into a single module at the moment unfortunately.
Ideally, the logging macros would live in std::logging, condition! would
live in std::condition, format! in std::fmt, etc. However, this
introduces cyclic dependencies between those modules and the macros they
use which the current expansion system can't deal with. We may be able
to get around this by changing the expansion phase to a two-pass system
but that's for a later PR.
Closes#2247
cc #11763
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
Previously, they were treated like ~[] and &[] (which can have length
0), but fixed length vectors are fixed length, i.e. we know at compile
time if it's possible to have length zero (which is only for [T, .. 0]).
Fixes#11659.
This means that compilation continues for longer, and so we can see more
errors per compile. This is mildly more user-friendly because it stops
users having to run rustc n times to see n macro errors: just run it
once to see all of them.
Previously, they were treated like ~[] and &[] (which can have length
0), but fixed length vectors are fixed length, i.e. we know at compile
time if it's possible to have length zero (which is only for [T, .. 0]).
Fixes#11659.
For `use` statements, this means disallowing qualifiers when in functions and
disallowing `priv` outside of functions.
For `extern mod` statements, this means disallowing everything everywhere. It
may have been envisioned for `pub extern mod foo` to be a thing, but it
currently doesn't do anything (resolve doesn't pick it up), so better to err on
the side of forwards-compatibility and forbid it entirely for now.
Closes#9957
For `use` statements, this means disallowing qualifiers when in functions and
disallowing `priv` outside of functions.
For `extern mod` statements, this means disallowing everything everywhere. It
may have been envisioned for `pub extern mod foo` to be a thing, but it
currently doesn't do anything (resolve doesn't pick it up), so better to err on
the side of forwards-compatibility and forbid it entirely for now.
Closes#9957
Major changes:
- Define temporary scopes in a syntax-based way that basically defaults
to the innermost statement or conditional block, except for in
a `let` initializer, where we default to the innermost block. Rules
are documented in the code, but not in the manual (yet).
See new test run-pass/cleanup-value-scopes.rs for examples.
- Refactors Datum to better define cleanup roles.
- Refactor cleanup scopes to not be tied to basic blocks, permitting
us to have a very large number of scopes (one per AST node).
- Introduce nascent documentation in trans/doc.rs covering datums and
cleanup in a more comprehensive way.
r? @pcwalton
This means that compilation continues for longer, and so we can see more
errors per compile. This is mildly more user-friendly because it stops
users having to run rustc n times to see n macro errors: just run it
once to see all of them.
Major changes:
- Define temporary scopes in a syntax-based way that basically defaults
to the innermost statement or conditional block, except for in
a `let` initializer, where we default to the innermost block. Rules
are documented in the code, but not in the manual (yet).
See new test run-pass/cleanup-value-scopes.rs for examples.
- Refactors Datum to better define cleanup roles.
- Refactor cleanup scopes to not be tied to basic blocks, permitting
us to have a very large number of scopes (one per AST node).
- Introduce nascent documentation in trans/doc.rs covering datums and
cleanup in a more comprehensive way.
This is a patch for #8005, thanks @lfairy for the hint.
It seems like `block.expr` is None, if the last line of a function has a semi colon (= it ends with a statement).
@kmcallister does this error message cover the intended use cases?
I'm not sure about the message, the wording and the span could probably be improved.
Unsuffixed literals like 1 and 1.1, and free type parameters sometimes
have to be printed in error messages, which ended up with <V0>, <VI0>
and <VF0>. This change puts the words "generic" and "integer"/"float"
into the message so it's not a completely black box.
Dead code pass now explicitly checks for `#[allow(dead_code)]` and
`#[lang=".."]` attributes on items and marks them as live if they have
those attributes. The former is done so that if we want to suppress
warnings for a group of dead functions, we only have to annotate the
"root" of the call chain.
Specifically, dissallow setting the number base for every type of float
literal, not only those that contain the decimal point. This is in line with
the description in the manual.
The `print!` and `println!` macros are now the preferred method of printing, and so there is no reason to export the `stdio` functions in the prelude. The functions have also been replaced by their macro counterparts in the tutorial and other documentation so that newcomers don't get confused about what they should be using.
The `print!` and `println!` macros are now the preferred method of printing, and so there is no reason to export the `stdio` functions in the prelude. The functions have also been replaced by their macro counterparts in the tutorial and other documentation so that newcomers don't get confused about what they should be using.
The resulting symbol names aren't very pretty at all:
trait Trait { fn method(&self); }
impl<'a> Trait for ~[(&'a int, fn())] { fn method(&self) {} }
gives
Trait$$UP$$VEC$$TUP_2$$BP$int$$FN$$::method::...hash...::v0.0
However, at least it contain some reference to the Self type, unlike
`Trait$__extensions__::method:...`, which is what the symbol name used
to be for anything other than `impl Trait for foo::bar::Baz` (which
became, and still becomes, `Trait$Baz::method`).
* vec::raw::to_ptr is gone
* Pausible => Pausable
* Removing @
* Calling the main task "<main>"
* Removing unused imports
* Removing unused mut
* Bringing some libextra tests up to date
* Allowing compiletest to work at stage0
* Fixing the bootstrap-from-c rmake tests
* assert => rtassert in a few cases
* printing to stderr instead of stdout in fail!()
Trap the io_error condition so that a more informative error message is
displayed when the linker program cannot be started, such as when the
name of the linker binary is accidentally mistyped.
closes#10755
We decided in the 12/10/13 weekly meeting that trailing commas should be
accepted pretty much anywhere. They are currently not allowed in struct
patterns, and this commit adds support for that.
Closes#10392
We decided in the 12/10/13 weekly meeting that trailing commas should be
accepted pretty much anywhere. They are currently not allowed in struct
patterns, and this commit adds support for that.
Closes#10392
Trap the io_error condition so that a more informative error message is
displayed when the linker program cannot be started, such as when the
name of the linker binary is accidentally mistyped.
closes#10755
This code in resolve accidentally forced all types with an impl to become
public. This fixes it by default inheriting the privacy of what was previously
there and then becoming `true` if nothing else exits.
Closes#10545
This code in resolve accidentally forced all types with an impl to become
public. This fixes it by default inheriting the privacy of what was previously
there and then becoming `true` if nothing else exits.
Closes#10545
If it's a trait method, this checks the stability attribute of the
method inside the trait definition. Otherwise, it checks the method
implementation itself.
Close#8961.
This pull request completely rewrites std::comm and all associated users. Some major bullet points
* Everything now works natively
* oneshots have been removed
* shared ports have been removed
* try_recv no longer blocks (recv_opt blocks)
* constructors are now Chan::new and SharedChan::new
* failure is propagated on send
* stream channels are 3x faster
I have acquired the following measurements on this patch. I compared against Go, but remember that Go's channels are fundamentally different than ours in that sends are by-default blocking. This means that it's not really a totally fair comparison, but it's good to see ballpark numbers for anyway
```
oneshot stream shared1
std 2.111 3.073 1.730
my 6.639 1.037 1.238
native 5.748 1.017 1.250
go8 1.774 3.575 2.948
go8-inf slow 0.837 1.376
go8-128 4.832 1.430 1.504
go1 1.528 1.439 1.251
go2 1.753 3.845 3.166
```
I had three benchmarks:
* oneshot - N times, create a "oneshot channel", send on it, then receive on it (no task spawning)
* stream - N times, send from one task to another task, wait for both to complete
* shared1 - create N threads, each of which sends M times, and a port receives N*M times.
The rows are as follows:
* `std` - the current libstd implementation (before this pull request)
* `my` - this pull request's implementation (in M:N mode)
* `native` - this pull request's implementation (in 1:1 mode)
* `goN` - go's implementation with GOMAXPROCS=N. The only relevant value is 8 (I had 8 cores on this machine)
* `goN-X` - go's implementation where the channels in question were created with buffers of size `X` to behave more similarly to rust's channels.
If it's a trait method, this checks the stability attribute of the
method inside the trait definition. Otherwise, it checks the method
implementation itself.
Previously, if you wanted to bind a field mutably or by ref, you had to
do something like Foo { x: ref mut x }. You can now just do
Foo { ref mut x }.
Closes#6137
This replaces the link meta attributes with a pkgid attribute and uses a hash
of this as the crate hash. This makes the crate hash computable by things
other than the Rust compiler. It also switches the hash function ot SHA1 since
that is much more likely to be available in shell, Python, etc than SipHash.
Fixes#10188, #8523.
This replaces the link meta attributes with a pkgid attribute and uses a hash
of this as the crate hash. This makes the crate hash computable by things
other than the Rust compiler. It also switches the hash function ot SHA1 since
that is much more likely to be available in shell, Python, etc than SipHash.
Fixes#10188, #8523.
Previously, if you wanted to bind a field mutably or by ref, you had to
do something like Foo { x: ref mut x }. You can now just do
Foo { ref mut x }.
Closes#6137
This bug showed up because the visitor only visited the path of the implemented
trait via walk_path (with no corresponding visit_path function). I have modified
the visitor to use visit_path (which is now overridable), and the privacy
visitor overrides this function and now properly checks for the privacy of all
paths.
Closes#10857
This registers new snapshots after the landing of #10528, and then goes on to tweak the build process to build a monolithic `rustc` binary for use in future snapshots. This mainly involved dropping the dynamic dependency on `librustllvm`, so that's now built as a static library (with a dynamically generated rust file listing LLVM dependencies).
This currently doesn't actually make the snapshot any smaller (24MB => 23MB), but I noticed that the executable has 11MB of metadata so once progress is made on #10740 we should have a much smaller snapshot.
There's not really a super-compelling reason to distribute just a binary because we have all the infrastructure for dealing with a directory structure, but to me it seems "more correct" that a snapshot compiler is just a `rustc` binary.
This adds support to link to OSX frameworks via the new link attribute when
using `kind = "framework"`. It is a compiler error to request linkage to a
framework when the target is not macos because other platforms don't support
frameworks.
Closes#2023
Instead of forcibly always aborting compilation, allow usage of
#[warn(unknown_features)] and related lint attributes to selectively abort
compilation. By default, this lint is deny.
Instead of forcibly always aborting compilation, allow usage of
#[warn(unknown_features)] and related lint attributes to selectively abort
compilation. By default, this lint is deny.
Currently, the parser doesn't give any context when it finds an unclosed
delimiter and it's not EOF. Report the most recent unclosed delimiter, to help
the user along.
Closes#10636
Issue #8763 is about improving a particular error message.
* added case & better error message for "impl trait for module"
* added compile-fail test trait-impl-for-module.rs
* updated copyright dates
* revised compile-fail test trait-or-new-type-instead
(the error message for the modified test is still unclear, but that's a different bug https://github.com/mozilla/rust/issues/8767)
* added case & better error message for "impl trait for module"
* used better way to print the module
* switched from //error-pattern to //~ ERROR
* added compile-fail test trait-impl-for-module.rs
* revised compile-fail test trait-or-new-type-instead
(the error message for the modified test is still unclear, but that's a different bug)
* added FIXME to trait-or-new-type-instead
I added a test case which does not compile today, and required changes on
privacy's side of things to get right. Additionally, this moves a good bit of
logic which did not belong in reachability into privacy.
All of reachability should solely be responsible for determining what the
reachable surface area of a crate is given the exported surface area (where the
exported surface area is that which is usable by external crates).
Privacy will now correctly figure out what's exported by deeply looking
through reexports. Previously if a module were reexported under another name,
nothing in the module would actually get exported in the executable. I also
consolidated the phases of privacy to be clearer about what's an input to what.
The privacy checking pass no longer uses the notion of an "all public" path, and
the embargo visitor is no longer an input to the checking pass.
Currently the embargo visitor is built as a saturating analysis because it's
unknown what portions of the AST are going to get re-exported.
This also cracks down on exported methods from impl blocks and trait blocks. If you implement a private trait, none of the symbols are exported, and if you have an impl for a private type none of the symbols are exported either. On the other hand, if you implement a public trait for a private type, the symbols are still exported. I'm unclear on whether this last part is correct, but librustc will fail to link unless it's in place.
I added a test case which does not compile today, and required changes on
privacy's side of things to get right. Additionally, this moves a good bit of
logic which did not belong in reachability into privacy.
All of reachability should solely be responsible for determining what the
reachable surface area of a crate is given the exported surface area (where the
exported surface area is that which is usable by external crates).
Privacy will now correctly figure out what's exported by deeply looking
through reexports. Previously if a module were reexported under another name,
nothing in the module would actually get exported in the executable. I also
consolidated the phases of privacy to be clearer about what's an input to what.
The privacy checking pass no longer uses the notion of an "all public" path, and
the embargo visitor is no longer an input to the checking pass.
Currently the embargo visitor is built as a saturating analysis because it's
unknown what portions of the AST are going to get re-exported.
I've started working on this issue and pushed a small commit, which adds a range check for integer literals in `middle::const_eval` (no `uint` at the moment)
At the moment, this patch is just a proof of concept, I'm not sure if there is a better function for the checks in `middle::const_eval`. This patch does not check for overflows after constant folding, eg:
let x: i8 = 99 + 99;
Bare functions are another example of a scalar but non-numeric
type (like char) that should be handled separately in casts.
This disallows expressions like `0 as extern "Rust" fn() -> int;`.
It might be advantageous to allow casts between bare functions
and raw pointers in unsafe code in the future, to pass function
pointers between Rust and C.
Closes#8728
Now the privacy pass returns enough information that other passes do not need to duplicate the visibility rules, and the missing_doc implementation is more consistent with other lint checks.
Previously, the `exported_items` set created by the privacy pass was
incomplete. Specifically, it did not include items that had been defined
at a private path but then `pub use`d at a public path. This commit
finds all crate exports during the privacy pass. Consequently, some code
in the reachable pass and in rustdoc is no longer necessary. This commit
then removes the separate `MissingDocLintVisitor` lint pass, opting to
check missing_doc lint in the same pass as the other lint checkers using
the visibility result computed by the privacy pass.
Fixes#9777.
These two attributes are no longer useful now that Rust has decided to leave
segmented stacks behind. It is assumed that the rust task's stack is always
large enough to make an FFI call (due to the stack being very large).
There's always the case of stack overflow, however, to consider. This does not
change the behavior of stack overflow in Rust. This is still normally triggered
by the __morestack function and aborts the whole process.
C stack overflow will continue to corrupt the stack, however (as it did before
this commit as well). The future improvement of a guard page at the end of every
rust stack is still unimplemented and is intended to be the mechanism through
which we attempt to detect C stack overflow.
Closes#8822Closes#10155
This code fits better in check because it is checking that the impl
matches the interface. This allows us to avoid the awkward constructions
that lazilly collect traits and so forth. It also permits us to make
use of the results of variance inference.
This rearranges the deriving code so that #[deriving] a trait on a field
that doesn't implement that trait will point to the field in question,
e.g.
struct NotEq; // doesn't implement Eq
#[deriving(Eq)]
struct Foo {
ok: int,
also_ok: ~str,
bad: NotEq // error points here.
}
Unfortunately, this means the error is disconnected from the `deriving`
itself but there's no current way to pass that information through to
rustc except via the spans, at the moment.
Fixes#7724.
This rearranges the deriving code so that #[deriving] a trait on a field
that doesn't implement that trait will point to the field in question,
e.g.
struct NotEq; // doesn't implement Eq
#[deriving(Eq)]
struct Foo {
ok: int,
also_ok: ~str,
bad: NotEq // error points here.
}
Unfortunately, this means the error is disconnected from the `deriving`
itself but there's no current way to pass that information through to
rustc except via the spans, at the moment.
Fixes#7724.
