This makes edge cases in which the `Iterator` trait was not in scope
and/or `Option` or its variants were not in scope work properly.
This breaks code that looks like:
struct MyStruct { ... }
impl MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
for x in MyStruct { ... } { ... }
Change ad-hoc `next` methods like the above to implementations of the
`Iterator` trait. For example:
impl Iterator<int> for MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
Closes#15392.
[breaking-change]
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
Being able to index into the bytes of a string encourages
poor UTF-8 hygiene. To get a view of `&[u8]` from either
a `String` or `&str` slice, use the `as_bytes()` method.
Closes#12710.
[breaking-change]
If the diffstat is any indication this shouldn't have a huge impact but it will have some. Most changes in the `str` and `path` module. A lot of the existing usages were in tests where ascii is expected. There are a number of other legit uses where the characters are known to be ascii.
Being able to index into the bytes of a string encourages
poor UTF-8 hygiene. To get a view of `&[u8]` from either
a `String` or `&str` slice, use the `as_bytes()` method.
Closes#12710.
[breaking-change]
Part of #14248
Main authors:
- @Ryman: OK
- @TeXitoi: OK
- @pcwalton: OK
Minor authors:
- @brson: OK
- @alexcrichton: OK
- @kballard: OK
Remark: @tedhorst was a main contributor, but its contribution
disapear with @pcwalton rewrite at af4ea11
This change registers new snapshots, allowing `*T` to be removed from the language. This is a large breaking change, and it is recommended that if compiler errors are seen that any FFI calls are audited to determine whether they should be actually taking `*mut T`.
This PR includes two big things and a bunch of little ones.
1) It enables hygiene for variables bound by 'match' expressions.
2) It fixes a bug discovered indirectly (#15221), wherein fold traversal failed to visit nonterminal nodes.
3) It fixes a small bug in the macro tutorial.
It also adds tests for the first two, and makes a bunch of small comment improvements and cleanup.
It turns out that bindings introduced by 'for' loops were not treated hygienically. The fix for this is to make the 'for' expansion more like a macro; rather than expanding sub-pieces and then assembling them, we need to rewrite the for and then call expand again on the whole thing.
This PR includes a test and the fix.
It also contains a number of other things:
- unit tests for other forms of hygiene (currently ignored)
- a fix for the isaac.rs macro that (it turned out) was relying on capturing
- other miscellaneous cleanup and comments
This will break code like:
fn f(x: &mut int) {}
let mut a = box 1i;
f(a);
Change it to:
fn f(x: &mut int) {}
let mut a = box 1i;
f(&mut *a);
RFC 33; issue #10504.
[breaking-change]
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
Closes#8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
This removes all remnants of `@` pointers from rustc. Additionally, this removes
the `GC` structure from the prelude as it seems odd exporting an experimental
type in the prelude by default.
Closes#14193
[breaking-change]
The following features have been removed
* box [a, b, c]
* ~[a, b, c]
* box [a, ..N]
* ~[a, ..N]
* ~[T] (as a type)
* deprecated_owned_vector lint
All users of ~[T] should move to using Vec<T> instead.
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
Part of #14248
Main contributors are @pcwalton, @alexcrichton and me. Only
@dguenther appear in git blame as a minor contribution, but it is
only adding the rust license, so removed by this relicensing.
part of #14248, fix#14420
Removed @richo's contribution (outdated comment)
Quoting @brson: let's move forward with this one. The only
statement I'm missing is @richo's and it sounds like his was a
minor patch.
part of #14248, fix#14420
Removed @richo's contribution (outdated comment)
Quoting @brson: let's move forward with this one. The only
statement I'm missing is @richo's and it sounds like his was a
minor patch.
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
This commit shuffles around some of the `rand` code, along with some
reorganization. The new state of the world is as follows:
* The librand crate now only depends on libcore. This interface is experimental.
* The standard library has a new module, `std::rand`. This interface will
eventually become stable.
Unfortunately, this entailed more of a breaking change than just shuffling some
names around. The following breaking changes were made to the rand library:
* Rng::gen_vec() was removed. This has been replaced with Rng::gen_iter() which
will return an infinite stream of random values. Previous behavior can be
regained with `rng.gen_iter().take(n).collect()`
* Rng::gen_ascii_str() was removed. This has been replaced with
Rng::gen_ascii_chars() which will return an infinite stream of random ascii
characters. Similarly to gen_iter(), previous behavior can be emulated with
`rng.gen_ascii_chars().take(n).collect()`
* {IsaacRng, Isaac64Rng, XorShiftRng}::new() have all been removed. These all
relied on being able to use an OSRng for seeding, but this is no longer
available in librand (where these types are defined). To retain the same
functionality, these types now implement the `Rand` trait so they can be
generated with a random seed from another random number generator. This allows
the stdlib to use an OSRng to create seeded instances of these RNGs.
* Rand implementations for `Box<T>` and `@T` were removed. These seemed to be
pretty rare in the codebase, and it allows for librand to not depend on
liballoc. Additionally, other pointer types like Rc<T> and Arc<T> were not
supported. If this is undesirable, librand can depend on liballoc and regain
these implementations.
* The WeightedChoice structure is no longer built with a `Vec<Weighted<T>>`,
but rather a `&mut [Weighted<T>]`. This means that the WeightedChoice
structure now has a lifetime associated with it.
* The `sample` method on `Rng` has been moved to a top-level function in the
`rand` module due to its dependence on `Vec`.
cc #13851
[breaking-change]
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes#12019
[breaking-change]
All of these features have been obsolete since February 2014, where most have
been obsolete since 2013. There shouldn't be any more need to keep around the
parser hacks after this length of time.
* Added `// no-pretty-expanded` to pretty-print a test, but not run it through
the `expanded` variant.
* Removed #[deriving] and other expanded attributes after they are expanded
* Removed hacks around &str and &&str and friends (from both the parser and the
pretty printer).
* Un-ignored a bunch of tests
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
- using libgreen to optimize CPU usage
- less tasks to limit wasted resources
Here, on a one core 2 threads CPU, new version is ~1.2 faster. May
be better with more core.
- using libgreen to optimize CPU usage
- less tasks to limit wasted resources
Here, on a one core 2 threads CPU, new version is ~1.2 faster. May
be better with more core.
The constructor for `TaskBuilder` is being changed to an associated
function called `new` for consistency with the rest of the standard
library.
Closes#13666
[breaking-change]
The constructor for `TaskBuilder` is being changed to an associated
function called `new` for consistency with the rest of the standard
library.
Closes#13666
[breaking-change]
Exposing ctpop, ctlz, cttz and bswap as taking signed i8/i16/... is just
exposing the internal LLVM names pointlessly (LLVM doesn't have "signed
integers" or "unsigned integers", it just has sized integer types
with (un)signed *operations*).
These operations are semantically working with raw bytes, which the
unsigned types model better.
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
* `Sender::try_send(t: T) -> bool`
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
* `SyncSender::try_send(t: T) -> TrySendResult<T>`
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
* `SyncSender::send_opt(t: T) -> Option<T>`
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
* `Receiver::try_recv(t: T) -> TryRecvResult<T>`
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes#11527
libstd: Implement `StrBuf`, a new string buffer type like `Vec`, and port all code over to use it.
Rebased & tests-fixed version of https://github.com/mozilla/rust/pull/13269
Few places where previous version of tidy script cannot find XXX:
* inside one-line comment preceding by a few spaces;
* inside multiline comments (now it finds it if multiline comment starts
on the same line with XXX).
Change occurences of XXX found by new tidy script.
`Reader`, `Writer`, `MemReader`, `MemWriter`, and `MultiWriter` now work with `Vec<u8>` instead of `~[u8]`. This does introduce some extra copies since `from_utf8_owned` isn't usable anymore, but I think that can't be helped until `~str`'s representation changes.
In summary these are some example transitions this change makes:
'a || => ||: 'a
proc:Send() => proc():Send
The intended syntax for closures is to put the lifetime bound not at the front
but rather in the list of bounds. Currently there is no official support in the
AST for bounds that are not 'static, so this case is currently specially handled
in the parser to desugar to what the AST is expecting. Additionally, this moves
the bounds on procedures to the correct position, which is after the argument
list.
The current grammar for closures and procedures is:
procedure := 'proc' [ '<' lifetime-list '>' ] '(' arg-list ')'
[ ':' bound-list ] [ '->' type ]
closure := [ 'unsafe' ] ['<' lifetime-list '>' ] '|' arg-list '|'
[ ':' bound-list ] [ '->' type ]
lifetime-list := lifetime | lifetime ',' lifetime-list
arg-list := ident ':' type | ident ':' type ',' arg-list
bound-list := bound | bound '+' bound-list
bound := path | lifetime
This does not currently handle the << ambiguity in `Option<<'a>||>`, I am
deferring that to a later patch. Additionally, this removes the support for the
obsolete syntaxes of ~fn and &fn.
Closes#10553Closes#10767Closes#11209Closes#11210Closes#11211
move errno -> IoError converter into std, bubble up OSRng errors
Also adds a general errno -> `~str` converter to `std::os`, and makes the failure messages for the things using `OSRng` (e.g. (transitively) the task-local RNG, meaning hashmap initialisation failures aren't such a black box).
The various ...Rng::new() methods can hit IO errors from the OSRng they use,
and it seems sensible to expose them at a higher level. Unfortunately, writing
e.g. `StdRng::new().unwrap()` gives a much poorer error message than if it
failed internally, but this is a problem with all `IoResult`s.
This bench is meant to exercise libgreen, not libnative. It recently caused the
auto-linux-32-nopt-t bot to fail as no output was produced for an hour.
This needs to be removed as part of removing `~[T]`. Partial type hints
are now allowed, and will remove the need to add a version of this
method for `Vec<T>`. For now, this involves a few workarounds for
partial type hints not completely working.
This commit moves all logging out of the standard library into an external
crate. This crate is the new crate which is responsible for all logging macros
and logging implementation. A few reasons for this change are:
* The crate map has always been a bit of a code smell among rust programs. It
has difficulty being loaded on almost all platforms, and it's used almost
exclusively for logging and only logging. Removing the crate map is one of the
end goals of this movement.
* The compiler has a fair bit of special support for logging. It has the
__log_level() expression as well as generating a global word per module
specifying the log level. This is unfairly favoring the built-in logging
system, and is much better done purely in libraries instead of the compiler
itself.
* Initialization of logging is much easier to do if there is no reliance on a
magical crate map being available to set module log levels.
* If the logging library can be written outside of the standard library, there's
no reason that it shouldn't be. It's likely that we're not going to build the
highest quality logging library of all time, so third-party libraries should
be able to provide just as high-quality logging systems as the default one
provided in the rust distribution.
With a migration such as this, the change does not come for free. There are some
subtle changes in the behavior of liblog vs the previous logging macros:
* The core change of this migration is that there is no longer a physical
log-level per module. This concept is still emulated (it is quite useful), but
there is now only a global log level, not a local one. This global log level
is a reflection of the maximum of all log levels specified. The previously
generated logging code looked like:
if specified_level <= __module_log_level() {
println!(...)
}
The newly generated code looks like:
if specified_level <= ::log::LOG_LEVEL {
if ::log::module_enabled(module_path!()) {
println!(...)
}
}
Notably, the first layer of checking is still intended to be "super fast" in
that it's just a load of a global word and a compare. The second layer of
checking is executed to determine if the current module does indeed have
logging turned on.
This means that if any module has a debug log level turned on, all modules
with debug log levels get a little bit slower (they all do more expensive
dynamic checks to determine if they're turned on or not).
Semantically, this migration brings no change in this respect, but
runtime-wise, this will have a perf impact on some code.
* A `RUST_LOG=::help` directive will no longer print out a list of all modules
that can be logged. This is because the crate map will no longer specify the
log levels of all modules, so the list of modules is not known. Additionally,
warnings can no longer be provided if a malformed logging directive was
supplied.
The new "hello world" for logging looks like:
#[phase(syntax, link)]
extern crate log;
fn main() {
debug!("Hello, world!");
}
This commit shreds all remnants of libextra from the compiler and standard
distribution. Two modules, c_vec/tempfile, were moved into libstd after some
cleanup, and the other modules were moved to separate crates as seen fit.
Closes#8784Closes#12413Closes#12576
Most IO related functions return an IoResult so that the caller can handle failure
in whatever way is appropriate. However, the `lines`, `bytes`, and `chars` iterators all
supress errors. This means that code that needs to handle errors can't use any of these
iterators. All three of these iterators were updated to produce IoResults.
Fixes#12368
This should be called far less than it is because it does expensive OS
interactions and seeding of the internal RNG, `task_rng` amortises this
cost. The main problem is the name is so short and suggestive.
The direct equivalent is `StdRng::new`, which does precisely the same
thing.
The deprecation will make migrating away from the function easier.
In the "reverse-complement" loop, if there is an odd number of element,
we forget to complement the element in the middle. For example, if the
input is "ggg", the result before the fix is "CgC" instead of "CCC".
This is because of this bug that the official shootout says that the rust
version is in "Bad Output". This commit should fix this error.
* `Ord` inherits from `Eq`
* `TotalOrd` inherits from `TotalEq`
* `TotalOrd` inherits from `Ord`
* `TotalEq` inherits from `Eq`
This is a partial implementation of #12517.
Similarly to #12422 which made stdin buffered by default, this commit makes the
output streams also buffered by default. Now that buffered writers will flush
their contents when they are dropped, I don't believe that there's no reason why
the output shouldn't be buffered by default, which is what you want in 90% of
cases.
As with stdin, there are new stdout_raw() and stderr_raw() functions to get
unbuffered streams to stdout/stderr.
This updates a number of ignore-test tests, and removes a few completely
outdated tests due to the feature being tested no longer being supported.
This brings a number of bench/shootout tests up to date so they're compiling
again. I make no claims to the performance of these benchmarks, it's just nice
to not have bitrotted code.
Closes#2604Closes#9407
With the stability attributes we can put public-but unstable modules next to others, so this moves `intrinsics` and `raw` out of the `unstable` module (and marks both as `#[experimental]`).
These two containers are indeed collections, so their place is in
libcollections, not in libstd. There will always be a hash map as part of the
standard distribution of Rust, but by moving it out of the standard library it
makes libstd that much more portable to more platforms and environments.
This conveniently also removes the stuttering of 'std::hashmap::HashMap',
although 'collections::HashMap' is only one character shorter.
One of the most common ways to use the stdin stream is to read it line by line
for a small program. In order to facilitate this common usage pattern, this
commit changes the stdin() function to return a BufferedReader by default. A new
`stdin_raw()` method was added to get access to the raw unbuffered stream.
I have not changed the stdout or stderr methods because they are currently
unable to flush in their destructor, but #12403 should have just fixed that.
One of the most common ways to use the stdin stream is to read it line by line
for a small program. In order to facilitate this common usage pattern, this
commit changes the stdin() function to return a BufferedReader by default. A new
`stdin_raw()` method was added to get access to the raw unbuffered stream.
I have not changed the stdout or stderr methods because they are currently
unable to flush in their destructor, but #12403 should have just fixed that.
