Add missing definitions required by the sparc-unknown-linux-gnu target
This PR adds a few missing definitions required by sparc-unknown-linux-target which were discovered during build tests.
Deduplicate and generalize some (de/)serializer impls
I noticed this while implementing #77227 and getting a "not implemented for [T; 16]" error. There's likely more things we can deduplicate in this file, but I didn't need any additional changes.
LVI hardening tests
Mitigating the speculative execution LVI attack against SGX enclaves requires compiler changes (i.e., adding lfences). This pull requests adds various tests to check if this happens correctly.
Reopen standard file descriptors when they are missing on Unix
The syscalls returning a new file descriptors generally return lowest-numbered
file descriptor not currently opened, without any exceptions for those
corresponding to stdin, sdout, or stderr.
Previously when any of standard file descriptors has been closed before starting
the application, operations on std::io::{stderr,stdin,stdout} were likely to
either succeed while being performed on unrelated file descriptor, or fail with
EBADF which is silently ignored.
Avoid the issue by using /dev/null as a replacement when the standard file
descriptors are missing.
The implementation is based on the one found in musl. It was selected among a
few others on the basis of the lowest overhead in the case when all descriptors
are already present (measured on GNU/Linux).
Closes#57728.
Closes#46981.
Closes#60447.
Benefits:
* Makes applications robust in the absence of standard file descriptors.
* Upholds IntoRawFd / FromRawFd safety contract (which was broken previously).
Drawbacks:
* Additional syscall during startup.
* The standard descriptors might have been closed intentionally.
* Requires /dev/null.
Alternatives:
* Check if stdin, stdout, stderr are opened and provide no-op substitutes in std::io::{stdin,stdout,stderr} without reopening them directly.
* Leave the status quo, expect robust applications to reopen them manually.
Replace `discriminant_switch_effect` with more general version
#68528 added a new edge-specific effect for `SwitchInt` terminators, `discriminant_switch_effect`, to the dataflow framework. While this accomplished the short-term goal of making drop elaboration more precise, it wasn't really useful in other contexts: It only supported `SwitchInt`s on the discriminant of an `enum` and did not allow effects to be applied along the "otherwise" branch. In const-propagation, for example, arbitrary edge-specific effects for the targets of a `SwitchInt` can be used to remember the value a `match` scrutinee must have in each arm.
This PR replaces `discriminant_switch_effect` with a more general `switch_int_edge_effects` method. The new method has a slightly different interface from the other edge-specific effect methods (e.g. `call_return_effect`). This divergence is explained in the new method's documentation, and reading the changes to the various dataflow impls as well as `direction.rs` should further clarify things. This PR should not change behavior.
The syscalls returning a new file descriptors generally use
lowest-numbered file descriptor not currently opened, without any
exceptions for those corresponding to the standard streams.
Previously when any of standard streams has been closed before starting
the application, operations on std::io::{stderr,stdin,stdout} objects
were likely to operate on other logically unrelated file resources
opened afterwards.
Avoid the issue by reopening the standard streams when they are closed.
Small improvements in liveness pass
* Remove redundant debug logging (`add_variable` already contains logging).
* Remove redundant fields for a number of live nodes and variables.
* Delay conversion from a symbol to a string until linting.
* Inline contents of specials struct.
* Remove unnecessary local variable exit_ln.
* Use newtype_index for Variable and LiveNode.
* Access live nodes directly through self.lnks[ln].
No functional changes intended (except those related to the logging).
Separate `private_intra_doc_links` and `broken_intra_doc_links` into separate lints
This is not ideal because it means `deny(broken_intra_doc_links)` will
no longer `deny(private_intra_doc_links)`. However, it can't be fixed
with a new lint group, because `broken` is already in the `rustdoc` lint
group; there would need to be a way to nest groups somehow.
This also removes the early `return` so that the link will be generated
even though it gives a warning.
r? @Manishearth
cc @ecstatic-morse (https://github.com/rust-lang/rust/pull/77242#issuecomment-699565095)
Check for missing const-stability attributes in `rustc_passes`
Currently, this happens as a side effect of `is_min_const_fn`, which is non-obvious. Also adds a test for this case, since we didn't seem to have one before.
update stdarch submodule
This commit update the src/stdarch submodule, we primarily want to include [https://github.com/rust-lang/stdarch/pull/918](url) which provides prefetch hints for aarch64. This PR could deliver ~20% performance gain on our aarch64 server in Filecoin. Wish this could be used as soon as possible.
Thanks.
This is not ideal because it means `deny(broken_intra_doc_links)` will
no longer `deny(private_intra_doc_links)`. However, it can't be fixed
with a new lint group, because `broken` is already in the `rustdoc` lint
group; there would need to be a way to nest groups somehow.
This also removes the early `return` so that the link will be generated
even though it gives a warning.
might_permit_raw_init: also check aggregate fields
This is the next step for https://github.com/rust-lang/rust/issues/66151: when doing `mem::zeroed`/`mem::uninitialized`, also recursively check fields of aggregates (except for arrays) for whether they permit zero/uninit initialization.
Refactor and fix intra-doc link diagnostics, and fix links to primitives
Closes https://github.com/rust-lang/rust/issues/76925, closes https://github.com/rust-lang/rust/issues/76693, closes https://github.com/rust-lang/rust/issues/76692.
Originally I only meant to fix#76925. But the hack with `has_primitive` was so bad it was easier to fix the primitive issues than to try and work around it.
Note that this still has one bug: `std::primitive::i32::MAX` does not resolve. However, this fixes the ICE so I'm fine with fixing the link in a later PR.
This is part of a series of refactors to make #76467 possible.
This is best reviewed commit-by-commit; it has detailed commit messages.
r? `@euclio`
Remove std::io::lazy::Lazy in favour of SyncOnceCell
The (internal) std::io::lazy::Lazy was used to lazily initialize the stdout and stdin buffers (and mutexes). It uses atexit() to register a destructor to flush the streams on exit, and mark the streams as 'closed'. Using the stream afterwards would result in a panic.
Stdout uses a LineWriter which contains a BufWriter that will flush the buffer on drop. This one is important to be executed during shutdown, to make sure no buffered output is lost. It also forbids access to stdout afterwards, since the buffer is already flushed and gone.
Stdin uses a BufReader, which does not implement Drop. It simply forgets any previously read data that was not read from the buffer yet. This means that in the case of stdin, the atexit() function's only effect is making stdin inaccessible to the program, such that later accesses result in a panic. This is uncessary, as it'd have been safe to access stdin during shutdown of the program.
---
This change removes the entire io::lazy module in favour of SyncOnceCell. SyncOnceCell's fast path is much faster (a single atomic operation) than locking a sys_common::Mutex on every access like Lazy did.
However, SyncOnceCell does not use atexit() to drop the contained object during shutdown.
As noted above, this is not a problem for stdin. It simply means stdin is now usable during shutdown.
The atexit() call for stdout is moved to the stdio module. Unlike the now-removed Lazy struct, SyncOnceCell does not have a 'gone and unusable' state that panics. Instead of adding this again, this simply replaces the buffer with one with zero capacity. This effectively flushes the old buffer *and* makes any writes afterwards pass through directly without touching a buffer, making print!() available during shutdown without panicking.
---
In addition, because the contents of the SyncOnceCell are no longer dropped, we can now use `&'static` instead of `Arc` in `Stdout` and `Stdin`. This also saves two levels of indirection in `stdin()` and `stdout()`, since Lazy effectively stored a `Box<Arc<T>>`, and SyncOnceCell stores the `T` directly.
This patch also:
* Add soft-float supports: only f32
* zero-extend i8/i16 to i32 because MIPS only supports register-length
arithmetic.
* Update table in asm! chapter in unstable book.
Return values up to 128 bits in registers
This fixes https://github.com/rust-lang/rust/issues/26494#issuecomment-619506345 by making Rust's default ABI pass return values up to 128 bits in size in registers, just like the System V ABI.
The result is that these methods from the comment linked above now generate the same code, making the Rust ABI as efficient as the `"C"` ABI:
```rust
pub struct Stats { x: u32, y: u32, z: u32, }
pub extern "C" fn sum_c(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
pub fn sum_rust(a: &Stats, b: &Stats) -> Stats {
return Stats {x: a.x + b.x, y: a.y + b.y, z: a.z + b.z };
}
```
```asm
sum_rust:
movl (%rsi), %eax
addl (%rdi), %eax
movl 4(%rsi), %ecx
addl 4(%rdi), %ecx
movl 8(%rsi), %edx
addl 8(%rdi), %edx
shlq $32, %rcx
orq %rcx, %rax
retq
```
Rollup of 10 pull requests
Successful merges:
- #76917 (Add missing code examples on HashMap types)
- #77107 (Enable const propagation into operands at mir_opt_level=2)
- #77129 (Update cargo)
- #77167 (Fix FIXME in core::num test: Check sign of zero in min/max tests.)
- #77184 (Rust vec bench import specific rand::RngCore)
- #77208 (Late link args order)
- #77209 (Fix documentation highlighting in ty::BorrowKind)
- #77231 (Move helper function for `missing_const_for_fn` out of rustc to clippy)
- #77235 (pretty-print-reparse hack: Rename some variables for clarity)
- #77243 (Test more attributes in test issue-75930-derive-cfg.rs)
Failed merges:
r? `@ghost`
Test more attributes in test issue-75930-derive-cfg.rs
Split out from #76130
This tests our handling of combining derives, derive helper
attributes, attribute macros, and `cfg`/`cfg_attr`
pretty-print-reparse hack: Rename some variables for clarity
This will also make it easier to make the comparisons asymmetric.
Also one impossible case is removed.
r? @Aaron1011
Move helper function for `missing_const_for_fn` out of rustc to clippy
cc @rust-lang/clippy @ecstatic-morse #76618
r? @Manishearth
I also removed all support for suggesting a function could be `const fn` when that would require feature gates to actually work.
This means we'll now have to maintain this ourselves in clippy, but that's how most lints work anyway, so...
Late link args order
MSYS2 changed how winpthreads is built and as the result it now depends on more mingw-w64 libraries.
This PR affects only MinGW targets since nobody else is using `late_link_args_{dynamic,static}`. Now the order is similar to how it used to be before https://github.com/rust-lang/rust/pull/67502.
Rust vec bench import specific rand::RngCore
Using `RngCore` import for side effects is clearer than `*` which may bring it unnecessary more stuff than needed, it is also more explicit doing so.
@pickfire change `LEN = 16384` (and pos) and `once` instead of `[0].iter()` after this.
@rustbot modify labels: +C-cleanup +A-testsuite
Update cargo
7 commits in 8777a6b1e8834899f51b7e09cc9b8d85b2417110..05c611ae3c4255b7a2bcf4fcfa65b20286a07839
2020-09-15 19:11:03 +0000 to 2020-09-23 23:10:38 +0000
- --workspace flag for locate-project to find the workspace root (rust-lang/cargo#8712)
- Remove some badges documentation. (rust-lang/cargo#8727)
- Add plain message format for locate-project (rust-lang/cargo#8707)
- Add a term option to configure the progress bar (rust-lang/cargo#8165)
- Replace d_as_f64 with as_secs_f64 (rust-lang/cargo#8721)
- Add cross check to filters_target test. (rust-lang/cargo#8713)
- Add test for whitespace behavior in env flags. (rust-lang/cargo#8706)
Enable const propagation into operands at mir_opt_level=2
Feature was added in #74507 but gated with `mir_opt_level>=3` because of compile time regressions. Let's see whether the LLVM 11 update solves that.
As the [perf results](https://github.com/rust-lang/rust/pull/77107#issuecomment-697668154) show, enabling this optimization results in a lot less regression as before.
cc @oli-obk
r? @ghost
