Consolidating rustc Dependencies
changelog: none
For dependencies in rustc where there are multiple versions used, this moves the older dependency to the newer dependency. These are the updates to clippy as mentioned here: https://github.com/rust-lang/rust/pull/120177
Suggest existing configuration option if one is found
While working on/testing #12179, I made the mistake of using underscores instead of dashes for the field name in the clippy.toml file and ended up being confused for a few minutes until I found out what's wrong. With this change, clippy will suggest an existing field if there's one that's similar.
```
1 | allow_mixed_uninlined_format_args = true
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: perhaps you meant: `allow-mixed-uninlined-format-args`
```
(in hindsight, the current behavior of printing all the config options makes it obvious in most cases but I still think a suggestion like this would be nice to have)
I had to play around with the value a bit. A max distance of 5 seemed a bit too strong since it'd suggest changing `foobar` to `msrv`, which seemed odd, and 4 seemed just good enough to detect a typo of five underscores.
changelog: when an invalid field in clippy.toml is found, suggest the closest existing one if one is found
[`multiple_crate_versions`]: add a configuration option for allowed duplicate crates
Closes#12176
changelog: [`multiple_crate_versions`]: add a configuration option for allowed duplicate crates
respect `#[allow]` attributes in `single_call_fn` lint
Fixes#12182
If we delay linting to `check_crate_post`, we need to use `span_lint_hir_and_then`, since otherwise it would only respect those lint level attributes at the crate root.
<sub>... maybe we can have an internal lint for this somehow?</sub>
changelog: respect `#[allow]` attributes in `single_call_fn` lint
Don't emit `derive_partial_eq_without_eq` lint if the type has the `non_exhaustive` attribute
Part of https://github.com/rust-lang/rust-clippy/issues/9063.
If a type has a field/variant with the `#[non_exhaustive]` attribute or the type itself has it, then do no emit the `derive_partial_eq_without_eq` lint.
changelog: Don't emit `derive_partial_eq_without_eq` lint if the type has the `non_exhaustive` attribute
Pack u128 in the compiler to mitigate new alignment
This is based on #116672, adding a new `#[repr(packed(8))]` wrapper on `u128` to avoid changing any of the compiler's size assertions. This is needed in two places:
* `SwitchTargets`, otherwise its `SmallVec<[u128; 1]>` gets padded up to 32 bytes.
* `LitKind::Int`, so that entire `enum` can stay 24 bytes.
* This change definitely has far-reaching effects though, since it's public.
`unused_io_amount` captures `Ok(_)`s
Partial rewrite of `unused_io_amount` to lint over `Ok(_)` and `Ok(..)`.
Moved the check to `check_block` to simplify context checking for expressions and allow us to check only some expressions.
For match (expr, arms) we emit a lint for io ops used on `expr` when an arm is `Ok(_)|Ok(..)`. Also considers the cases when there are guards in the arms and `if let Ok(_) = ...` cases.
For `Ok(_)` and `Ok(..)` it emits a note indicating where the value is ignored.
changelog: False Negatives [`unused_io_amount`]: Extended `unused_io_amount` to catch `Ok(_)`s in `If let` and match exprs.
Closes#11713
r? `@giraffate`
Partial rewrite of `unused_io_account` to lint over Ok(_).
Moved the check to `check_block` to simplify context checking for
expressions and allow us to check only some expressions.
For match (expr, arms) we emit a lint for io ops used on `expr` when an
arm is `Ok(_)`. Also considers the cases when there are guards in the
arms. It also captures `if let Ok(_) = ...` cases.
For `Ok(_)` it emits a note indicating where the value is ignored.
changelog: False Negatives [`unused_io_amount`]: Extended
`unused_io_amount` to catch `Ok(_)`s in `If let` and match exprs.
Don't forget that the lifetime on hir types is `'tcx`
This PR just tracks the `'tcx` lifetime to wherever the original objects actually have that lifetime. This code is needed for https://github.com/rust-lang/rust/pull/107606 (now #120131) so that `ast_ty_to_ty` can invoke `lit_to_const` on an argument passed to it. Currently the argument is `&hir::Ty<'_>`, but after this PR it is `&'tcx hir::Ty<'tcx>`.
no_effect_underscore_binding: _ prefixed variables can be used
Prefixing a variable with a `_` does not mean that it will not be used. If such a variable is used later, do not warn about the fact that its initialization does not have a side effect as this is fine.
changelog: [`no_effect_underscore_binding`]: warn only if variable is unused
Fix#12166
Add . to end of lint lists in configuration + Fix typo in pub_underscore_fields_behavior
Fixes https://github.com/rust-lang/rust-clippy/pull/10283#issuecomment-1890600381
In the "/// Lint: " list on each configuration option, you have to end with a dot. If the lint list doesn't have a dot, the configuration won't have documentation.
This PR adds those missing dots in some of the configuration, thus also adding their documentation.
changelog: Fix bug where a lot of config documentation wasn't showing.
changelog: Fix typo in `pub_underscore_fields_behavior` (`PublicallyExported` -> `PubliclyExported`)
Find function path references early in the same lint pass
This removes a visitor that existed to collect paths to functions in a context where the exact signature is required in order to cancel the lint.
E.g. when there's a `let _: fn(&mut i32) = path_to_fn_ref_mut_i32;` statement somewhere in the crate, we shouldn't suggest removing the mutable reference in the function signature.
It was doing a whole pass through the crate at the end, which seems unnecessary.
It seems like we should be able to add entries to the map in the same lint pass.
The map is untouched all the way until `check_crate_post` (at which point it will be populated by the visitor and finally checked), so it doesn't seem like this changes behavior: it will only be fully populated by the time we reach `check_crate_post` no matter what.
I don't think this will have a significant perf impact but it did show up in a profile with 0.5% for a crate I was looking into and looked like a low hanging fruit.
changelog: none
Prefixing a variable with a `_` does not mean that it will not be used.
If such a variable is used later, do not warn about the fact that its
initialization does not have a side effect as this is fine.
Fix error warning span for issue12045
fixes [Issue#12045](https://github.com/rust-lang/rust-clippy/issues/12045)
In issue#12045, unexpected warning span occurs on attribute `#[derive(typed_builder::TypedBuilder)]`, actually the warning should underline `_lifetime`.
In the source code we can find that the original intend is to warning on `ident.span`, but in this case, `stmt.span` is unequal with `ident.span`. So, fix the nit here is fine.
Besides, `ident.span` have an accurate range than `stmt.span`.
changelog: [`no_effect_underscore_binding`]: correct warning span
blocks_in_conditions: do not warn if condition comes from macro
changelog: [`blocks_in_conditions`]: do not warn if condition comes from macro
Fix#12162
fix FP on [`semicolon_if_nothing_returned`]
fixes: #12123
---
changelog: fix FP on [`semicolon_if_nothing_returned`] which suggesting adding semicolon after attr macro
[`default_numeric_fallback`]: improve const context detection
Fixes#12159
The lint didn't actually recognize any of the associated consts (in the linked issue), because in those cases the parent is an `ImplItem` and not an `Item`, but it only actually emitted a lint for i32 and f64 because the other cases failed the very last check here
bb2d497364/clippy_lints/src/default_numeric_fallback.rs (L91-L96)
A better check for detecting constness would be using `body_const_context`, which is what this PR does.
changelog: [`default_numeric_fallback`]: recognize associated consts
Move async closure parameters into the resultant closure's future eagerly
Move async closure parameters into the closure's resultant future eagerly.
Before, we used to desugar `async |p1, p2, ..| { body }` as `|p1, p2, ..| { || async { body } }`. Now, we desugar the above like `|p1, p2, ..| { async move { let p1 = p1; let p2 = p2; ... body } }`. This mirrors the same desugaring that `async fn` does with its parameter types, and the compiler literally uses the same code via a shared helper function.
This removes the necessity for E0708, since now expressions like `async |x: i32| { x }` will not give you confusing borrow errors.
This does *not* fix the case where async closures have self-borrows. This will come with a general implementation of async closures, which is still in the works.
r? oli-obk
Fix [`multiple_crate_versions`] to correctly normalize package names to avoid missing the local one
Fixes#12145
changelog: [`multiple_crate_versions`]: correctly normalize package name
Correctly handle type relative in trait_duplication_in_bounds lint
Fixes#9961.
The generic bounds were not correctly checked and left out `QPath::TypeRelative`, making different bounds look the same and generating invalid errors (and fix).
r? `@blyxyas`
changelog: [`trait_duplication_in_bounds`]: Correctly handle type relative.
`read_zero_byte_vec` refactor for better heuristics
Fixes#9274
Previously, the implementation of `read_zero_byte_vec` only checks for the next statement after the vec init. This fails when there is a block with statements that are expanded and walked by the old visitor.
This PR refactors so that:
1. It checks if there is a `resize` on the vec
2. It works on blocks properly
e.g. This should properly lint now:
```
let mut v = Vec::new();
{
f.read(&mut v)?;
//~^ ERROR: reading zero byte data to `Vec`
}
```
changelog: [`read_zero_byte_vec`] Refactored for better heuristics
Add suspicious_open_options lint.
changelog: [`suspicious_open_options`]: Checks for the suspicious use of std::fs::OpenOptions::create() without an explicit OpenOptions::truncate().
create() alone will either create a new file or open an existing file. If the file already exists, it will be overwritten when written to, but the file will not be truncated by default. If less data is written to the file than it already contains, the remainder of the file will remain unchanged, and the end of the file will contain old data.
In most cases, one should either use `create_new` to ensure the file is created from scratch, or ensure `truncate` is called so that the truncation behaviour is explicit. `truncate(true)` will ensure the file is entirely overwritten with new data, whereas `truncate(false)` will explicitely keep the default behavior.
```rust
use std::fs::OpenOptions;
OpenOptions::new().create(true).truncate(true);
```
- [x] Followed [lint naming conventions][lint_naming]
- [x] Added passing UI tests (including committed `.stderr` file)
- [x] `cargo test` passes locally
- [x] Executed `cargo dev update_lints`
- [x] Added lint documentation
- [x] Run `cargo dev fmt`
