Print a helpful message if unwinding aborts when it reaches a nounwind function
This is implemented by routing `TerminatorKind::Abort` back through the panic handler, but with a special flag in the `PanicInfo` which indicates that the panic handler should *not* attempt to unwind the stack and should instead abort immediately.
This is useful for the planned change in https://github.com/rust-lang/lang-team/issues/97 which would make `Drop` impls `nounwind` by default.
### Code
```rust
#![feature(c_unwind)]
fn panic() {
panic!()
}
extern "C" fn nounwind() {
panic();
}
fn main() {
nounwind();
}
```
### Before
```
$ ./test
thread 'main' panicked at 'explicit panic', test.rs:4:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Illegal instruction (core dumped)
```
### After
```
$ ./test
thread 'main' panicked at 'explicit panic', test.rs:4:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
thread 'main' panicked at 'panic in a function that cannot unwind', test.rs:7:1
stack backtrace:
0: 0x556f8f86ec9b - <std::sys_common::backtrace::_print::DisplayBacktrace as core::fmt::Display>::fmt::hdccefe11a6ac4396
1: 0x556f8f88ac6c - core::fmt::write::he152b28c41466ebb
2: 0x556f8f85d6e2 - std::io::Write::write_fmt::h0c261480ab86f3d3
3: 0x556f8f8654fa - std::panicking::default_hook::{{closure}}::h5d7346f3ff7f6c1b
4: 0x556f8f86512b - std::panicking::default_hook::hd85803a1376cac7f
5: 0x556f8f865a91 - std::panicking::rust_panic_with_hook::h4dc1c5a3036257ac
6: 0x556f8f86f079 - std::panicking::begin_panic_handler::{{closure}}::hdda1d83c7a9d34d2
7: 0x556f8f86edc4 - std::sys_common::backtrace::__rust_end_short_backtrace::h5b70ed0cce71e95f
8: 0x556f8f865592 - rust_begin_unwind
9: 0x556f8f85a764 - core::panicking::panic_no_unwind::h2606ab3d78c87899
10: 0x556f8f85b910 - test::nounwind::hade6c7ee65050347
11: 0x556f8f85b936 - test::main::hdc6e02cb36343525
12: 0x556f8f85b7e3 - core::ops::function::FnOnce::call_once::h4d02663acfc7597f
13: 0x556f8f85b739 - std::sys_common::backtrace::__rust_begin_short_backtrace::h071d40135adb0101
14: 0x556f8f85c149 - std::rt::lang_start::{{closure}}::h70dbfbf38b685e93
15: 0x556f8f85c791 - std::rt::lang_start_internal::h798f1c0268d525aa
16: 0x556f8f85c131 - std::rt::lang_start::h476a7ee0a0bb663f
17: 0x556f8f85b963 - main
18: 0x7f64c0822b25 - __libc_start_main
19: 0x556f8f85ae8e - _start
20: 0x0 - <unknown>
thread panicked while panicking. aborting.
Aborted (core dumped)
```
`Decoder` has two impls:
- opaque: this impl is already partly infallible, i.e. in some places it
currently panics on failure (e.g. if the input is too short, or on a
bad `Result` discriminant), and in some places it returns an error
(e.g. on a bad `Option` discriminant). The number of places where
either happens is surprisingly small, just because the binary
representation has very little redundancy and a lot of input reading
can occur even on malformed data.
- json: this impl is fully fallible, but it's only used (a) for the
`.rlink` file production, and there's a `FIXME` comment suggesting it
should change to a binary format, and (b) in a few tests in
non-fundamental ways. Indeed #85993 is open to remove it entirely.
And the top-level places in the compiler that call into decoding just
abort on error anyway. So the fallibility is providing little value, and
getting rid of it leads to some non-trivial performance improvements.
Much of this commit is pretty boring and mechanical. Some notes about
a few interesting parts:
- The commit removes `Decoder::{Error,error}`.
- `InternIteratorElement::intern_with`: the impl for `T` now has the same
optimization for small counts that the impl for `Result<T, E>` has,
because it's now much hotter.
- Decodable impls for SmallVec, LinkedList, VecDeque now all use
`collect`, which is nice; the one for `Vec` uses unsafe code, because
that gave better perf on some benchmarks.
Improve SIMD casts
* Allows `simd_cast` intrinsic to take `usize` and `isize`
* Adds `simd_as` intrinsic, which is the same as `simd_cast` except for saturating float-to-int conversions (matching the behavior of `as`).
cc `@workingjubilee`
Avoid unnecessary monomorphization of inline asm related functions
This should reduce build time for codegen backends by avoiding duplicated monomorphization of certain inline asm related functions for each passed in closure type.
Implement `#[rustc_must_implement_one_of]` attribute
This PR adds a new attribute — `#[rustc_must_implement_one_of]` that allows changing the "minimal complete definition" of a trait. It's similar to GHC's minimal `{-# MINIMAL #-}` pragma, though `#[rustc_must_implement_one_of]` is weaker atm.
Such attribute was long wanted. It can be, for example, used in `Read` trait to make transitions to recently added `read_buf` easier:
```rust
#[rustc_must_implement_one_of(read, read_buf)]
pub trait Read {
fn read(&mut self, buf: &mut [u8]) -> Result<usize> {
let mut buf = ReadBuf::new(buf);
self.read_buf(&mut buf)?;
Ok(buf.filled_len())
}
fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<()> {
default_read_buf(|b| self.read(b), buf)
}
}
impl Read for Ty0 {}
//^ This will fail to compile even though all `Read` methods have default implementations
// Both of these will compile just fine
impl Read for Ty1 {
fn read(&mut self, buf: &mut [u8]) -> Result<usize> { /* ... */ }
}
impl Read for Ty2 {
fn read_buf(&mut self, buf: &mut ReadBuf<'_>) -> Result<()> { /* ... */ }
}
```
For now, this is implemented as an internal attribute to start experimenting on the design of this feature. In the future we may want to extend it:
- Allow arbitrary requirements like `a | (b & c)`
- Allow multiple requirements like
- ```rust
#[rustc_must_implement_one_of(a, b)]
#[rustc_must_implement_one_of(c, d)]
```
- Make it appear in rustdoc documentation
- Change the syntax?
- Etc
Eventually, we should make an RFC and make this (or rather similar) attribute public.
---
I'm fairly new to compiler development and not at all sure if the implementation makes sense, but at least it passes tests :)
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
Add diagnostic items for macros
For use in Clippy, it adds diagnostic items to all the stable public macros
Clippy has lints that look for almost all of these (currently by name or path), but there are a few that aren't currently part of any lint, I could remove those if it's preferred to add them as needed rather than ahead of time
Ensure that `Fingerprint` caching respects hashing configuration
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Fixes#92266
In some `HashStable` impls, we use a cache to avoid re-computing
the same `Fingerprint` from the same structure (e.g. an `AdtDef`).
However, the `StableHashingContext` used can be configured to
perform hashing in different ways (e.g. skipping `Span`s). This
configuration information is not included in the cache key,
which will cause an incorrect `Fingerprint` to be used if
we hash the same structure with different `StableHashingContext`
settings.
To fix this, the configuration settings of `StableHashingContext`
are split out into a separate `HashingControls` struct. This
struct is used as part of the cache key, ensuring that our caches
always produce the correct result for the given settings.
With this in place, we now turn off `Span` hashing during the
entire process of computing the hash included in legacy symbols.
This current has no effect, but will matter when a future PR
starts hashing more `Span`s that we currently skip.
Add `#[rustc_clean(loaded_from_disk)]` to assert loading of query result
Currently, you can use `#[rustc_clean]` to assert to that a particular
query (technically, a `DepNode`) is green or red. However, a green
`DepNode` does not mean that the query result was actually deserialized
from disk - we might have never re-run a query that needed the result.
Some incremental tests are written as regression tests for ICEs that
occured during query result decoding. Using
`#[rustc_clean(loaded_from_disk="typeck")]`, you can now assert
that the result of a particular query (e.g. `typeck`) was actually
loaded from disk, in addition to being green.
Currently, you can use `#[rustc_clean]` to assert to that a particular
query (technically, a `DepNode`) is green or red. However, a green
`DepNode` does not mean that the query result was actually deserialized
from disk - we might have never re-run a query that needed the result.
Some incremental tests are written as regression tests for ICEs that
occured during query result decoding. Using
`#[rustc_clean(loaded_from_disk="typeck")]`, you can now assert
that the result of a particular query (e.g. `typeck`) was actually
loaded from disk, in addition to being green.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
By changing `as_str()` to take `&self` instead of `self`, we can just
return `&str`. We're still lying about lifetimes, but it's a smaller lie
than before, where `SymbolStr` contained a (fake) `&'static str`!
manually implement `Hash` for `DefId`
This might speed up hashing for hashers that can work on individual u64s. Just as an experiment, suggested in a reddit thread on `FxHasher`. cc `@nnethercote`
Note that this should not be merged as is without cfg-ing the code path for 64 bits.
This also reorders the fields to reduce the assembly operations for hashing
and changes two UI tests that depended on the former ordering because of
hashmap iteration order.
Rollup of 6 pull requests
Successful merges:
- #87599 (Implement concat_bytes!)
- #89999 (Update std::env::temp_dir to use GetTempPath2 on Windows when available.)
- #90796 (Remove the reg_thumb register class for asm! on ARM)
- #91042 (Use Vec extend instead of repeated pushes on several places)
- #91634 (Do not attempt to suggest help for overly malformed struct/function call)
- #91685 (Install llvm tools to sysroot when assembling local toolchain)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Remove the reg_thumb register class for asm! on ARM
Also restricts r8-r14 from being used on Thumb1 targets as per #90736.
cc ``@Lokathor``
r? ``@joshtriplett``
Implement concat_bytes!
This implements the unstable `concat_bytes!` macro, which has tracking issue #87555. It can be used like:
```rust
#![feature(concat_bytes)]
fn main() {
assert_eq!(concat_bytes!(), &[]);
assert_eq!(concat_bytes!(b'A', b"BC", [68, b'E', 70]), b"ABCDEF");
}
```
If strings or characters are used where byte strings or byte characters are required, it suggests adding a `b` prefix. If a number is used outside of an array it suggests arrayifying it. If a boolean is used it suggests replacing it with the numeric value of that number. Doubly nested arrays of bytes are disallowed.
Support AVR for inline asm!
A first pass at support for the AVR platform in inline `asm!`. Passes the initial compiler tests, have not yet done more complete verification.
In particular, the register classes could use a lot more fleshing out, this draft PR so far only includes the most basic.
cc `@Amanieu` `@dylanmckay`
std: Stabilize the `thread_local_const_init` feature
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
Keep spans for generics in `#[derive(_)]` desugaring
Keep the spans for generics coming from a `derive`d Item, so that errors
and suggestions have better detail.
Fix#84003.
Reintroduce `into_future` in `.await` desugaring
This is a reintroduction of the remaining parts from https://github.com/rust-lang/rust/pull/65244 that have not been relanded yet.
This isn't quite ready to merge yet. The last attempt was reverting due to performance regressions, so we need to make sure this does not introduce those issues again.
Issues #67644, #67982
/cc `@yoshuawuyts`
* Annotate `derive`d spans from the user's code with the appropciate context
* Add `Span::can_be_used_for_suggestion` to query if the underlying span
at the users' code
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
Print associated types on opaque `impl Trait` types
This PR generalizes #91021, printing associated types for all opaque `impl Trait` types instead of just special-casing for future.
before:
```
error[E0271]: type mismatch resolving `<impl Iterator as Iterator>::Item == u32`
```
after:
```
error[E0271]: type mismatch resolving `<impl Iterator<Item = usize> as Iterator>::Item == u32`
```
---
Questions:
1. I'm kinda lost in binders hell with this one. Is all of the `rebind`ing necessary?
2. Is there a map collection type that will give me a stable iteration order? Doesn't seem like TraitRef is Ord, so I can't just sort later..
3. I removed the logic that suppresses printing generator projection types. It creates outputs like this [gist](https://gist.github.com/compiler-errors/d6f12fb30079feb1ad1d5f1ab39a3a8d). Should I put that back?
4. I also added spaces between traits, `impl A+B` -> `impl A + B`. I quite like this change, but is there a good reason to keep it like that?
r? ````@estebank````
Split inline const to two feature gates and mark expression position inline const complete
This PR splits inline const in pattern position into its own `#![feature(inline_const_pat)]` feature gate, and make the usage in expression position complete.
I think I have resolved most outstanding issues related to `inline_const` with #89561 and other PRs. The only thing left that I am aware of is #90150 and the lack of lifetime checks when inline const is used in pattern position (FIXME in #89561). Implementation-wise when used in pattern position it has to be lowered during MIR building while in expression position it's evaluated only when monomorphizing (just like normal consts), so it makes some sense to separate it into two feature gates so one can progress without being blocked by another.
``@rustbot`` label: T-compiler F-inline_const
Suggestion to wrap inner types using 'allocator_api' in tuple
This PR provides a suggestion to wrap the inner types in tuple when being along with 'allocator_api'.
Closes https://github.com/rust-lang/rust/issues/83250
```rust
fn main() {
let _vec: Vec<u8, _> = vec![]; //~ ERROR use of unstable library feature 'allocator_api'
}
```
```diff
error[E0658]: use of unstable library feature 'allocator_api'
--> $DIR/suggest-vec-allocator-api.rs:2:23
|
LL | let _vec: Vec<u8, _> = vec![];
- | ^
+ | ----^
+ | |
+ | help: consider wrapping the inner types in tuple: `(u8, _)`
|
= note: see issue #32838 <https://github.com/rust-lang/rust/issues/32838> for more information
= help: add `#![feature(allocator_api)]` to the crate attributes to enable
```
Fix `non-constant value` ICE (#90878)
This also fixes the same suggestion, which was kind of broken, because it just searched for the last occurence of `const` to replace with a `let`. This works great in some cases, but when there is no const and a leading space to the file, it doesn't work and panic with overflow because it thought that it had found a const.
I also changed the suggestion to only trigger if the `const` and the non-constant value are on the same line, because if they aren't, the suggestion is very likely to be wrong.
Also don't trigger the suggestion if the found `const` is on line 0, because that triggers the ICE.
Asking Esteban to review since he was the last one to change the relevant code.
r? ``@estebank``
Fixes#90878
This function parameter attribute was introduced in https://github.com/rust-lang/rust/pull/44866 as an intermediate step in implementing `impl Trait`, it's not necessary or used anywhere by itself.
This also fixes the same suggestion, which was kind of broken, because it just searched for the last occurence of `const` to replace with a `let`. This works great in some cases, but when there is no const and a leading space to the file, it doesn't work and panic with overflow because it thought that it had found a const.
I also changed the suggestion to only trigger if the `const` and the non-constant value are on the same line, because if they aren't, the suggestion is very likely to be wrong.
Also don't trigger the suggestion if the found `const` is on line 0, because that triggers the ICE.
Don't destructure args tuple in format_args!
This allows Clippy to parse the HIR more simply since `arg0` is changed to `_args.0`. (cc rust-lang/rust-clippy#7843). From rustc's perspective, I think this is something between a lateral move and a tiny improvement since there are fewer bindings.
r? `@m-ou-se`
Add features gates for experimental asm features
This PR splits off parts of `asm!` into separate features because they are not ready for stabilization.
Specifically this adds:
- `asm_const` for `const` operands.
- `asm_sym` for `sym` operands.
- `asm_experimental_arch` for architectures other than x86, x86_64, arm, aarch64 and riscv.
r? `@nagisa`
Improve and test cross-crate hygiene
- Decode the parent expansion for traits and enums in `rustc_resolve`, this was already being used for resolution in typeck
- Avoid suggesting importing names with def-site hygiene, since it's often not useful
- Add more tests
r? `@petrochenkov`
Add LLVM CFI support to the Rust compiler
This PR adds LLVM Control Flow Integrity (CFI) support to the Rust compiler. It initially provides forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by defining and using compatible type identifiers (see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you, `@eddyb` and `@pcc,` for all the help!
This commit adds LLVM Control Flow Integrity (CFI) support to the Rust
compiler. It initially provides forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by defining and using compatible type identifiers
(see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Implement coherence checks for negative trait impls
The main purpose of this PR is to be able to [move Error trait to core](https://github.com/rust-lang/project-error-handling/issues/3).
This feature is necessary to handle the following from impl on box.
```rust
impl From<&str> for Box<dyn Error> { ... }
```
Without having negative traits affect coherence moving the error trait into `core` and moving that `From` impl to `alloc` will cause the from impl to no longer compiler because of a potential future incompatibility. The compiler indicates that `&str` _could_ introduce an `Error` impl in the future, and thus prevents the `From` impl in `alloc` that would cause overlap with `From<E: Error> for Box<dyn Error>`. Adding `impl !Error for &str {}` with the negative trait coherence feature will disable this error by encoding a stability guarantee that `&str` will never implement `Error`, making the `From` impl compile.
We would have this in `alloc`:
```rust
impl From<&str> for Box<dyn Error> {} // A
impl<E> From<E> for Box<dyn Error> where E: Error {} // B
```
and this in `core`:
```rust
trait Error {}
impl !Error for &str {}
```
r? `@nikomatsakis`
This PR was built on top of `@yaahc` PR #85764.
Language team proposal: to https://github.com/rust-lang/lang-team/issues/96
add feature flag for `type_changing_struct_update`
This implements the PR0 part of the mentoring notes within #86618.
overrides the previous inactive #86646 pr.
r? ```@nikomatsakis```
Suggest a case insensitive match name regardless of levenshtein distance
Fixes#86170
Currently, `find_best_match_for_name` only returns a case insensitive match name depending on a Levenshtein distance. It's a bit unfortunate that that hides some suggestions for typos like `Bar` -> `BAR`. That idea is from https://github.com/rust-lang/rust/pull/46347#discussion_r153701834, but I think it still makes some sense to show a candidate when we find a case insensitive match name as it's more like a typo.
Skipped the `candidate != lookup` check because the current (i.e, `levenshtein_match`) returns the exact same `Symbol` anyway but it doesn't seem to confuse anything on UI tests.
r? ``@estebank``
Add `const_eval_select` intrinsic
Adds an intrinsic that calls a given function when evaluated at compiler time, but generates a call to another function when called at runtime.
See https://github.com/rust-lang/const-eval/issues/7 for previous discussion.
r? `@oli-obk.`
Actually add the feature to the lints ui test
Add tracking issue to the feature declaration
Rename feature gate to non_exhaustive_omitted_patterns_lint
Add more omitted_patterns lint feature gate
By adding #![doc(cfg_hide(foobar))] to the crate attributes the cfg
#[cfg(foobar)] (and _only_ that _exact_ cfg) will not be implicitly
treated as a doc(cfg) to render a message in the documentation.
Add expansion to while desugar spans
In the same vein as #88163, this reverts a change in Clippy behavior as a result of #80357 (and reverts some `#[allow]`s): This changes `clippy::blocks_in_if_conditions` to not fire on `while` loops. Though we might actually want Clippy to lint those cases, we should introduce the change purposefully, with tests, and possibly under a different lint name.
The actual change here is to add a desugaring expansion to the spans when lowering a `while` loop.
r? `@Manishearth`
Avoid a couple of Symbol::as_str calls in cg_llvm
This should improve performance a tiny bit. Also remove `Symbol::len` and make `SymbolIndex` private.
Support `#[track_caller]` on closures and generators
## Lang team summary
This PR adds support for placing the `#[track_caller]` attribute on closure and generator expressions. This attribute's addition behaves identically (from a users perspective) to the attribute being placed on the method in impl Fn/FnOnce/FnMut for ... generated by compiler.
The attribute is currently "double" feature gated -- both `stmt_expr_attributes` (preexisting) and `closure_track_caller` (newly added) must be enabled in order to place these attributes on closures.
As the Fn* traits lack a `#[track_caller]` attribute in their definition, caller information does not propagate when invoking closures through dyn Fn*. There is no limitation that this PR adds in supporting this; it can be added in the future.
# Implementation details
This is implemented in the same way as for functions - an extra
location argument is appended to the end of the ABI. For closures,
this argument is *not* part of the 'tupled' argument storing the
parameters - the final closure argument for `#[track_caller]` closures
is no longer a tuple.
For direct (monomorphized) calls, the necessary support was already
implemented - we just needeed to adjust some assertions around checking
the ABI and argument count to take closures into account.
For calls through a trait object, more work was needed.
When creating a `ReifyShim`, we need to create a shim
for the trait method (e.g. `FnOnce::call_mut`) - unlike normal
functions, closures are never invoked directly, and always go through a
trait method.
Additional handling was needed for `InstanceDef::ClosureOnceShim`. In
order to pass location information throgh a direct (monomorphized) call
to `FnOnce::call_once` on an `FnMut` closure, we need to make
`ClosureOnceShim` aware of `#[tracked_caller]`. A new field
`track_caller` is added to `ClosureOnceShim` - this is used by
`InstanceDef::requires_caller` location, allowing codegen to
pass through the extra location argument.
Since `ClosureOnceShim.track_caller` is only used by codegen,
we end up generating two identical MIR shims - one for
`track_caller == true`, and one for `track_caller == false`. However,
these two shims are used by the entire crate (i.e. it's two shims total,
not two shims per unique closure), so this shouldn't a big deal.
This PR allows applying a `#[track_caller]` attribute to a
closure/generator expression. The attribute as interpreted as applying
to the compiler-generated implementation of the corresponding trait
method (`FnOnce::call_once`, `FnMut::call_mut`, `Fn::call`, or
`Generator::resume`).
This feature does not have its own feature gate - however, it requires
`#![feature(stmt_expr_attributes)]` in order to actually apply
an attribute to a closure or generator.
This is implemented in the same way as for functions - an extra
location argument is appended to the end of the ABI. For closures,
this argument is *not* part of the 'tupled' argument storing the
parameters - the final closure argument for `#[track_caller]` closures
is no longer a tuple.
For direct (monomorphized) calls, the necessary support was already
implemented - we just needeed to adjust some assertions around checking
the ABI and argument count to take closures into account.
For calls through a trait object, more work was needed.
When creating a `ReifyShim`, we need to create a shim
for the trait method (e.g. `FnOnce::call_mut`) - unlike normal
functions, closures are never invoked directly, and always go through a
trait method.
Additional handling was needed for `InstanceDef::ClosureOnceShim`. In
order to pass location information throgh a direct (monomorphized) call
to `FnOnce::call_once` on an `FnMut` closure, we need to make
`ClosureOnceShim` aware of `#[tracked_caller]`. A new field
`track_caller` is added to `ClosureOnceShim` - this is used by
`InstanceDef::requires_caller` location, allowing codegen to
pass through the extra location argument.
Since `ClosureOnceShim.track_caller` is only used by codegen,
we end up generating two identical MIR shims - one for
`track_caller == true`, and one for `track_caller == false`. However,
these two shims are used by the entire crate (i.e. it's two shims total,
not two shims per unique closure), so this shouldn't a big deal.
"Fix" an overflow in byte position math
r? `@estebank`
help! I fixed the ICE only to brick the diagnostic.
I mean, it was wrong previously (using an already expanded macro span), but it is really bad now XD
Implement `#[must_not_suspend]`
implements #83310
Some notes on the impl:
1. The code that searches for the attribute on the ADT is basically copied from the `must_use` lint. It's not shared, as the logic did diverge
2. The RFC does specify that the attribute can be placed on fn's (and fn-like objects), like `must_use`. I think this is a direct copy from the `must_use` reference definition. This implementation does NOT support this, as I felt that ADT's (+ `impl Trait` + `dyn Trait`) cover the usecase's people actually want on the RFC, and adding an imp for the fn call case would be significantly harder. The `must_use` impl can do a single check at fn call stmt time, but `must_not_suspend` would need to answer the question: "for some value X with type T, find any fn call that COULD have produced this value". That would require significant changes to `generator_interior.rs`, and I would need mentorship on that. `@eholk` and I are discussing it.
3. `@estebank` do you know a way I can make the user-provided `reason` note pop out? right now it seems quite hidden
Also, I am not sure if we should run perf on this
r? `@nikomatsakis`
This allows the format_args! macro to keep the pre-expansion code out of
the unsafe block without doing gymnastics with nested `match`
expressions. This reduces codegen.
Convert `debug_assert` to `assert` in `CachingSourceMapView`
I suspect that there's a bug somewhere in this code, which is
leading to the `predicates_of` ICE being seen in #89035
Move the Lock into symbol::Interner
This makes it easier to make the symbol interner (near) lock free in case of concurrent accesses in the future.
With https://github.com/rust-lang/rust/pull/87867 landed this shouldn't affect performance anymore.
Allow `panic!("{}", computed_str)` in const fn.
Special-case `panic!("{}", arg)` and translate it to `panic_display(&arg)`. `panic_display` will behave like `panic_any` in cosnt eval and behave like `panic!(format_args!("{}", arg))` in runtime.
This should bring Rust 2015 and 2021 to feature parity in terms of `const_panic`; and hopefully would unblock the stabilisation of #51999.
`@rustbot` modify labels: +T-compiler +T-libs +A-const-eval +A-const-fn
r? `@oli-obk`
Introduce a fast path that avoids the `debug_tuple` abstraction when deriving Debug for unit-like enum variants.
The intent here is to allow LLVM to remove the switch entirely in favor of an
indexed load from a table of constant strings, which is likely what the
programmer would write in C. Unfortunately, LLVM currently doesn't perform this
optimization due to a bug, but there is [a
patch](https://reviews.llvm.org/D109565) that fixes this issue. I've verified
that, with that patch applied on top of this commit, Debug for unit-like tuple
variants becomes a load, reducing the O(n) code bloat to O(1).
Note that inlining `DebugTuple::finish()` wasn't enough to allow LLVM to
optimize the code properly; I had to avoid the abstraction entirely. Not using
the abstraction is likely better for compile time anyway.
Part of #88793.
r? `@oli-obk`
cleanup(rustc_trait_selection): remove vestigial code from rustc_on_unimplemented
This isn't allowed by the validator, and seems to be unused.
When it was added in ed10a3faae,
it was used on `Sized`, and that usage is gone.
Revert anon union parsing
Revert PR #84571 and #85515, which implemented anonymous union parsing in a manner that broke the context-sensitivity for the `union` keyword and thus broke stable Rust code.
Fix#88583.
Using symbol::Interner makes it very easy to mixup UniqueTypeId symbols
with the global interner. In fact the Debug implementation of
UniqueTypeId did exactly this.
Using a separate interner type also avoids prefilling the interner with
unused symbols and allow for optimizing the symbol interner for parallel
access without negatively affecting the single threaded module codegen.
Encode spans relative to the enclosing item
The aim of this PR is to avoid recomputing queries when code is moved without modification.
MCP at https://github.com/rust-lang/compiler-team/issues/443
This is achieved by :
1. storing the HIR owner LocalDefId information inside the span;
2. encoding and decoding spans relative to the enclosing item in the incremental on-disk cache;
3. marking a dependency to the `source_span(LocalDefId)` query when we translate a span from the short (`Span`) representation to its explicit (`SpanData`) representation.
Since all client code uses `Span`, step 3 ensures that all manipulations
of span byte positions actually create the dependency edge between
the caller and the `source_span(LocalDefId)`.
This query return the actual absolute span of the parent item.
As a consequence, any source code motion that changes the absolute byte position of a node will either:
- modify the distance to the parent's beginning, so change the relative span's hash;
- dirty `source_span`, and trigger the incremental recomputation of all code that
depends on the span's absolute byte position.
With this scheme, I believe the dependency tracking to be accurate.
For the moment, the spans are marked during lowering.
I'd rather do this during def-collection,
but the AST MutVisitor is not practical enough just yet.
The only difference is that we attach macro-expanded spans
to their expansion point instead of the macro itself.
Debug for unit-like enum variants.
The intent here is to allow LLVM to remove the switch entirely in favor of an
indexed load from a table of constant strings, which is likely what the
programmer would write in C. Unfortunately, LLVM currently doesn't perform this
optimization due to a bug, but there is [a
patch](https://reviews.llvm.org/D109565) that fixes this issue. I've verified
that, with that patch applied on top of this commit, Debug for unit-like tuple
variants becomes a load, reducing the O(n) code bloat to O(1).
Note that inlining `DebugTuple::finish()` wasn't enough to allow LLVM to
optimize the code properly; I had to avoid the abstraction entirely. Not using
the abstraction is likely better for compile time anyway.
Part of #88793.
This reverts commit 059b68dd67.
Note that this was manually adjusted to retain some of the refactoring
introduced by commit 059b68dd67, so that it could
likewise retain the correction introduced in commit
5b4bc05fa5
Path remapping: Make behavior of diagnostics output dependent on presence of --remap-path-prefix.
This PR fixes a regression (#87745) with `--remap-path-prefix` where the flag stopped causing diagnostic messages to be remapped as well. The regression was introduced in https://github.com/rust-lang/rust/pull/83813 where we erroneously assumed that remapping of diagnostic messages was not desired anymore (because #70642 partially undid that functionality with nobody objecting).
The issue is fixed by making `--remap-path-prefix` remap diagnostic messages again, including for paths that have been remapped in upstream crates (e.g. the standard library). This means that "sysroot-localization" (implemented in #70642) is also disabled if `rustc` is invoked with `--remap-path-prefix`. The assumption is that once someone starts explicitly remapping paths they also don't want paths to their local Rust installation in their build output.
In the future we might want to give more fine-grained control over this behavior via compiler flags (see https://github.com/rust-lang/rfcs/pull/3127 for a related RFC). For now this PR is intended as a regression fix.
This PR is an alternative to https://github.com/rust-lang/rust/pull/88191, which makes diagnostic messages be remapped unconditionally. That approach, however, would effectively revert #70642.
Fixes https://github.com/rust-lang/rust/issues/87745.
cc `@cbeuw`
r? `@ghost`
Introduce `let...else`
Tracking issue: #87335
The trickiest part for me was enforcing the diverging else block with clear diagnostics. Perhaps the obvious solution is to expand to `let _: ! = ..`, but I decided against this because, when a "mismatched type" error is found in typeck, there is no way to trace where in the HIR the expected type originated, AFAICT. In order to pass down this information, I believe we should introduce `Expectation::LetElseNever(HirId)` or maybe add `HirId` to `Expectation::HasType`, but I left that as a future enhancement. For now, I simply assert that the block is `!` with a custom `ObligationCauseCode`, and I think this is clear enough, at least to start. The downside here is that the error points at the entire block rather than the specific expression with the wrong type. I left a todo to this effect.
Overall, I believe this PR is feature-complete with regard to the RFC.
Don't use `guess_head_span` in `predicates_of` for foreign span
Previously, the result of `predicates_of` for a foreign trait
would depend on the *current* state of the corresponding source
file in the foreign crate. This could lead to ICEs during incremental
compilation, since the on-disk contents of the upstream source file
could potentially change without the upstream crate being recompiled.
Additionally, this ensure that that the metadata we produce for a crate
only depends on its *compiled* upstream dependencies (e.g an rlib or
rmeta file), *not* the current on-disk state of the upstream crate
source files.
Previously, the result of `predicates_of` for a foreign trait
would depend on the *current* state of the corresponding source
file in the foreign crate. This could lead to ICEs during incremental
compilation, since the on-disk contents of the upstream source file
could potentially change without the upstream crate being recompiled.
Additionally, this ensure that that the metadata we produce for a crate
only depends on its *compiled* upstream dependencies (e.g an rlib or
rmeta file), *not* the current on-disk state of the upstream crate
source files.
Remove `HashStable` impls for `FileName` and `RealFileName`
These impls were unused, and incorrectly hashed the local
(non-remapped) path for `RealFileName::Remapped` (which would
break reproducible builds if these impls were used).
Add future-incompat lint for `doc(primitive)`
## What is `doc(primitive)`?
`doc(primitive)` is an attribute recognized by rustdoc which adds documentation for the built-in primitive types, such as `usize` and `()`. It has been stable since Rust 1.0.
## Why change anything?
`doc(primitive)` is useless for anyone outside the standard library. Since rustdoc provides no way to combine the documentation on two different primitive items, you can only replace the docs, and since the standard library already provides extensive documentation there is no reason to do so.
While fixing rustdoc's handling of primitive items (https://github.com/rust-lang/rust/pull/87073) I discovered that even rustdoc's existing handling of primitive items was broken if you had more than two crates using it (it would pick randomly between them). That meant both:
- Keeping rustdoc's existing treatment was nigh-impossible, because it was random.
- doc(primitive) was even more useless than it would otherwise be.
The only use-case for this outside the standard library is for no-std libraries which want to link to primitives (https://github.com/rust-lang/rust/issues/73423) which is being fixed in https://github.com/rust-lang/rust/pull/87073.
https://github.com/rust-lang/rust/pull/87073 makes various breaking changes to `doc(primitive)` (breaking in the sense that they change the semantics, not in that they cause code to fail to compile). It's not possible to avoid these and still fix rustdoc's issues.
## What can we do about it?
As shown by the crater run (https://github.com/rust-lang/rust/pull/87050#issuecomment-886166706), no one is actually using doc(primitive), there wasn't a single true regression in the whole run. We can either:
1. Feature gate it completely, breaking anyone who crater missed. They can easily fix the breakage just by removing the attribute.
2. add it to the `INVALID_DOC_ATTRIBUTES` future-incompat lint, and at the same time make it a no-op unless you add a feature gate. That would mean rustdoc has to look at the features of dependent crates, because it needs to know where primitives are defined in order to link to them.
3. add it to `INVALID_DOC_ATTRIBUTES`, but still use it to determine where primitives come from
4. do nothing; the behavior will silently change in https://github.com/rust-lang/rust/pull/87073.
My preference is for 2, but I would also be happy with 1 or 3. I don't think we should silently change the behavior.
This PR currently implements 3.
Uplift the invalid_atomic_ordering lint from clippy to rustc
This is mostly just a rebase of https://github.com/rust-lang/rust/pull/79654; I've copy/pasted the text from that PR below.
r? `@lcnr` since you reviewed the last one, but feel free to reassign.
---
This is an implementation of https://github.com/rust-lang/compiler-team/issues/390.
As mentioned, in general this turns an unconditional runtime panic into a (compile time) lint failure. It has no false positives, and the only false negatives I'm aware of are if `Ordering` isn't specified directly and is comes from an argument/constant/whatever.
As a result of it having no false positives, and the alternative always being strictly wrong, it's on as deny by default. This seems right.
In the [zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Uplift.20the.20.60invalid_atomic_ordering.60.20lint.20from.20clippy/near/218483957) `@joshtriplett` suggested that lang team should FCP this before landing it. Perhaps libs team cares too?
---
Some notes on the code for reviewers / others below
## Changes from clippy
The code is changed from [the implementation in clippy](68cf94f6a6/clippy_lints/src/atomic_ordering.rs) in the following ways:
1. Uses `Symbols` and `rustc_diagnostic_item`s instead of string literals.
- It's possible I should have just invoked Symbol::intern for some of these instead? Seems better to use symbol, but it did require adding several.
2. The functions are moved to static methods inside the lint struct, as a way to namespace them.
- There's a lot of other code in that file — which I picked as the location for this lint because `@jyn514` told me that seemed reasonable.
3. Supports unstable AtomicU128/AtomicI128.
- I did this because it was almost easier to support them than not — not supporting them would have (ideally) required finding a way not to give them a `rustc_diagnostic_item`, which would have complicated an already big macro.
- These don't have tests since I wasn't sure if/how I should make tests conditional on whether or not the target has the atomic... This is to a certain extent an issue of 64bit atomics too, but 128-bit atomics are much less common. Regardless, the existing tests should be *more* than thorough enough here.
4. Minor changes like:
- grammar tweaks ("loads cannot have `Release` **and** `AcqRel` ordering" => "loads cannot have `Release` **or** `AcqRel` ordering")
- function renames (`match_ordering_def_path` => `matches_ordering_def_path`),
- avoiding clippy-specific helper methods that don't exist in rustc_lint and didn't seem worth adding for this case (for example `cx.struct_span_lint` vs clippy's `span_lint_and_help` helper).
## Potential issues
(This is just about the code in this PR, not conceptual issues with the lint or anything)
1. I'm not sure if I should have used a diagnostic item for `Ordering` and its variants (I couldn't figure out how really, so if I should do this some pointers would be appreciated).
- It seems possible that failing to do this might possibly mean there are more cases this lint would miss, but I don't really know how `match_def_path` works and if it has any pitfalls like that, so maybe not.
2. I *think* I deprecated the lint in clippy (CC `@flip1995` who asked to be notified about clippy changes in the future in [this comment](https://github.com/rust-lang/rust/pull/75671#issuecomment-718731659)) but I'm not sure if I need to do anything else there.
- I'm kind of hoping CI will catch if I missed anything, since `x.py test src/tools/clippy` fails with a lot of errors with and without my changes (and is probably a nonsense command regardless). Running `cargo test` from src/tools/clippy also fails with unrelated errors that seem like refactorings that didnt update clippy? So, honestly no clue.
3. I wasn't sure if the description/example I gave good. Hopefully it is. The example is less thorough than the one from clippy here: https://rust-lang.github.io/rust-clippy/master/index.html#invalid_atomic_ordering. Let me know if/how I should change it if it needs changing.
4. It pulls in the `if_chain` crate. This crate was already used in clippy, and seems like it's used elsewhere in rustc, but I'm willing to rewrite it to not use this if needed (I'd prefer not to, all things being equal).
- Deprecate clippy::invalid_atomic_ordering
- Use rustc_diagnostic_item for the orderings in the invalid_atomic_ordering lint
- Reduce code duplication
- Give up on making enum variants diagnostic items and just look for
`Ordering` instead
I ran into tons of trouble with this because apparently the change to
store HIR attrs in a side table also gave the DefIds of the
constructor instead of the variant itself. So I had to change
`matches_ordering` to also check the grandparent of the defid as well.
- Rename `atomic_ordering_x` symbols to just the name of the variant
- Fix typos in checks - there were a few places that said "may not be
Release" in the diagnostic but actually checked for SeqCst in the lint.
- Make constant items const
- Use fewer diagnostic items
- Only look at arguments after making sure the method matches
This prevents an ICE when there aren't enough arguments.
- Ignore trait methods
- Only check Ctors instead of going through `qpath_res`
The functions take values, so this couldn't ever be anything else.
- Add if_chain to allowed dependencies
- Fix grammar
- Remove unnecessary allow
These impls were unused, and incorrectly hashed the local
(non-remapped) path for `RealFileName::Remapped` (which would
break reproducible builds if these impls were used).
Add support for clobber_abi to asm!
This PR adds the `clobber_abi` feature that was proposed in #81092.
Fixes#81092
cc `@rust-lang/wg-inline-asm`
r? `@nagisa`
The new implementation allows some `memcpy`s to be optimized away,
so the uninit value in ui/sanitize/memory.rs is constructed directly
onto the return place. Therefore the sanitizer now says that the
value is allocated by `main` rather than `random`.
Support negative numbers in Literal::from_str
proc_macro::Literal has allowed negative numbers in a single literal token ever since Rust 1.29, using https://doc.rust-lang.org/stable/proc_macro/struct.Literal.html#method.isize_unsuffixed and similar constructors.
```rust
let lit = proc_macro::Literal::isize_unsuffixed(-10);
```
However, the suite of constructors on Literal is not sufficient for all use cases, for example arbitrary precision floats, or custom suffixes in FFI macros.
```rust
let lit = proc_macro::Literal::f64_unsuffixed(0.101001000100001000001000000100000001); // :(
let lit = proc_macro::Literal::i???_suffixed(10ulong); // :(
```
For those, macros construct the literal using from_str instead, which preserves arbitrary precision, custom suffixes, base, and digit grouping.
```rust
let lit = "0.101001000100001000001000000100000001".parse::<Literal>().unwrap();
let lit = "10ulong".parse::<Literal>().unwrap();
let lit = "0b1000_0100_0010_0001".parse::<Literal>().unwrap();
```
However, until this PR it was not possible to construct a literal token that is **both** negative **and** preserving of arbitrary precision etc.
This PR fixes `Literal::from_str` to recognize negative integer and float literals.
Implement a `explicit_generic_args_with_impl_trait` feature gate
Implements #83701
When this gate is enabled, explicit generic arguments can be specified even if `impl Trait` is used in argument position. Generic arguments can only be specified for explicit generic parameters but not for the synthetic type parameters from `impl Trait`
So code like this will be accepted:
```rust
#![feature(explicit_generic_args_with_impl_trait)]
fn foo<T: ?Sized>(_f: impl AsRef<T>) {}
fn main() {
foo::<str>("".to_string());
}
```
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
When this gate is enabled, explicit generic arguments can be specified even
if `impl Trait` is used in argument position. Generic arguments can only be
specified for explicit generic parameters but not for the synthetic type
parameters from `impl Trait`
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
During const eval, this replaces calls to core::panicking::panic_fmt and
std::panicking::being_panic_fmt with a call to a new const fn:
core::panicking::const_panic_fmt. That function uses
fmt::Arguments::as_str() to get the str and calls panic_str with that
instead.
panic!() invocations with formatting arguments are still not accepted,
as the creation of such a fmt::Arguments cannot be done in constant
functions right now.
Various diagnostics clean ups/tweaks
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
* Always point at macros, including derive macros
* Point at non-local items that introduce a trait requirement
* On private associated item, point at definition
Add diagnostic items for Clippy
This adds a bunch of diagnostic items to `std`/`core`/`alloc` functions, structs and traits used in Clippy. The actual refactorings in Clippy to use these items will be done in a different PR in Clippy after the next sync.
This PR doesn't include all paths Clippy uses, I've only gone through the first 85 lines of Clippy's [`paths.rs`](ecf85f4bdc/clippy_utils/src/paths.rs) (after rust-lang/rust-clippy#7466) to get some feedback early on. I've also decided against adding diagnostic items to methods, as it would be nicer and more scalable to access them in a nicer fashion, like adding a `is_diagnostic_assoc_item(did, sym::Iterator, sym::map)` function or something similar (Suggested by `@camsteffen` [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Diagnostic.20Item.20Naming.20Convention.3F/near/225024603))
There seems to be some different naming conventions when it comes to diagnostic items, some use UpperCamelCase (`BinaryHeap`) and some snake_case (`hashmap_type`). This PR uses UpperCamelCase for structs and traits and snake_case with the module name as a prefix for functions. Any feedback on is this welcome.
cc: rust-lang/rust-clippy#5393
r? `@Manishearth`
Avoid cloning ExpnData to access Span edition
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
r? `@ghost` -- opening for a perf run to start with
ExpnData is a fairly hefty structure to clone; cloning it may not be cheap. In
some cases this may get optimized out, but it's not clear that will always be
the case. Try to avoid that cost.
target abi
Implement cfg(target_abi) (RFC 2992)
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
Update targets to use `target_abi`
All eabi targets have `target_abi = "eabi".`
All eabihf targets have `target_abi = "eabihf"`.
`armv6_unknown_freebsd` and `armv7_unknown_freebsd` have `target_abi = "eabihf"`.
All abi64 targets have `target_abi = "abi64"`.
All ilp32 targets have `target_abi = "ilp32"`.
All softfloat targets have `target_abi = "softfloat"`.
All *-uwp-windows-* targets have `target_abi = "uwp"`.
All spe targets have `target_abi = "spe"`.
All macabi targets have `target_abi = "macabi"`.
aarch64-apple-ios-sim has `target_abi = "sim"`.
`x86_64-fortanix-unknown-sgx` has `target_abi = "fortanix"`.
`x86_64-unknown-linux-gnux32` has `target_abi = "x32"`.
Add FIXME entries for targets for which existing values need to change
once `cfg_target_abi` becomes stable. (All of them are tier 3 targets.)
Add a test for `target_abi` in `--print cfg`.
Add clobber-only register classes for asm!
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Use diagnostic items instead of lang items for rfc2229 migrations
This PR removes the `Send`, `UnwindSafe` and `RefUnwindSafe` lang items introduced in https://github.com/rust-lang/rust/pull/84730, and uses diagnostic items instead to check for `Send`, `UnwindSafe` and `RefUnwindSafe` traits for RFC2229 migrations.
r? ```@nikomatsakis```
Add an `abi` field to `TargetOptions`, defaulting to "". Support using
`cfg(target_abi = "...")` for conditional compilation on that field.
Gated by `feature(cfg_target_abi)`.
Add a test for `target_abi`, and a test for the feature gate.
Add `target_abi` to tidy as a platform-specific cfg.
This does not add an abi to any existing target.
Avoid byte to char position conversions in `is_multiline`
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
Converting a byte position into a char position is currently linear in
the number of multibyte characters in the source code. Avoid it when
checking if a range spans across lines.
This makes it feasible to compile source files with a large number of
multibyte characters.
The sha-1 and md-5 packages contain crates named sha1 and md5,
respectively. This discrepancy makes it somewhat more challenging to
automate detection of unused crates. Explicitly rename the packages to
the names of the crates they contain, to simplify such detection.
Better errors for Debug and Display traits
Currently, if someone tries to pass value that does not implement `Debug` or `Display` to a formatting macro, they get a very verbose and confusing error message. This PR changes the error messages for missing `Debug` and `Display` impls to be less overwhelming in this case, as suggested by #85844. I was a little less aggressive in changing the error message than that issue proposed. Still, this implementation would be enough to reduce the number of messages to be much more manageable.
After this PR, information on the cause of an error involving a `Debug` or `Display` implementation would suppressed if the requirement originated within a standard library macro. My reasoning was that errors originating from within a macro are confusing when they mention details that the programmer can't see, and this is particularly problematic for `Debug` and `Display`, which are most often used via macros. It is possible that either a broader or a narrower criterion would be better. I'm quite open to any feedback.
Fixes#85844.
Disambiguate between SourceFiles from different crates even if they have the same path
This PR fixes an ICE that can occur when the compiler encounters a source file that is part of both the local crate and an upstream crate:
1. While importing source files from an upstream crate the compiler creates a `SourceFile` entry for `foo.rs` in the `SourceMap`. Since this is an imported source file its `src` field is `None`.
2. At a later point the parser encounters `foo.rs` again. It tells the `SourceMap` to load the file but because we already have an entry for `foo.rs` the `SourceMap` will return the existing version with `src == None`.
3. The parser proceeds under the assumption that `src.is_some()` and panics when actually trying to use the file's contents.
This PR fixes the issue by adding the source file's associated `CrateNum` to the `SourceMap`'s interning key. As a consequence the two instances of the file will each have a separate entry in the `SourceMap`. They just happen to share the same file path. This approach seemed less problematic to me than trying to mutate the `SourceFile` after it had already been created.
Another, more involved, approach might be to merge the `src` and the `external_src` field.
Fixes#85955
Add `future_prelude_collision` lint
Implements #84594. (RFC rust-lang/rfcs#3114 ([rendered](https://github.com/rust-lang/rfcs/blob/master/text/3114-prelude-2021.md))) Not entirely complete but wanted to have my progress decently available while I finish off the last little bits.
Things left to implement:
* [x] UI tests for lints
* [x] Only emit lint for 2015 and 2018 editions
* [ ] Lint name/message bikeshedding
* [x] Implement for `FromIterator` (from best I can tell, the current approach as mentioned from [this comment](https://github.com/rust-lang/rust/issues/84594#issuecomment-847288288) won't work due to `FromIterator` instances not using dot-call syntax, but if I'm correct about this then that would also need to be fixed for `TryFrom`/`TryInto`)*
* [x] Add to `rust-2021-migration` group? (See #85512) (added to `rust-2021-compatibility` group)
* [ ] Link to edition guide in lint docs
*edit: looked into it, `lookup_method` will also not be hit for `TryFrom`/`TryInto` for non-dotcall syntax. If anyone who is more familiar with typecheck knows the equivalent for looking up associated functions, feel free to chime in.
Add MIR pass to lower call to `core::slice::len` into `Len` operand
During some larger experiment with range analysis I've found that code like `let l = slice.len()` produces different MIR then one found in bound checks. This optimization pass replaces terminators that are calls to `core::slice::len` with just a MIR operand and Goto terminator.
It uses some heuristics to remove the outer borrow that is made to call `core::slice::len`, but I assume it can be eliminated, just didn't find how.
Would like to express my gratitude to `@oli-obk` who helped me a lot on Zullip
Hash DefId in rustc_span.
This is mostly just moving code around. Changes are simplifications of unneeded callbacks from rustc_span to rustc_middle.
r? `@petrochenkov`
BPF target support
This adds `bpfel-unknown-none` and `bpfeb-unknown-none`, two new no_std targets that generate little and big endian BPF. The approach taken is very similar to the cuda target, where `TargetOptions::obj_is_bitcode` is enabled and code generation is done by the linker.
I added the targets to `dist-various-2`. There are [some tests](https://github.com/alessandrod/bpf-linker/tree/main/tests/assembly) in bpf-linker and I'm planning to add more. Those are currently not ran as part of rust CI.
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
`try_trait_v2` tracking issue: https://github.com/rust-lang/rust/issues/84277
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
Parse unnamed fields of struct and union type
Added the `unnamed_fields` feature gate.
This is a prototype of [RFC 2102](https://github.com/rust-lang/rust/issues/49804), so any suggestions are greatly appreciated.
r? `@petrochenkov`
have on_completion record subcycles
have on_completion record subcycles
Rework `on_completion` method so that it removes all
provisional cache entries that are "below" a completed
node (while leaving those entries that are not below
the node).
This corrects an imprecise result that could in turn lead
to an incremental compilation failure. Under the old
scheme, if you had:
* A depends on...
* B depends on A
* C depends on...
* D depends on C
* T: 'static
then the provisional results for A, B, C, and D would all
be entangled. Thus, if A was `EvaluatedToOkModuloRegions`
(because of that final condition), then the result for C and
D would also be demoted to "ok modulo regions".
In reality, though, the result for C depends only on C and itself,
and is not dependent on regions. If we happen to evaluate the
cycle starting from C, we would never reach A, and hence the
result would be "ok".
Under the new scheme, the provisional results for C and D
are moved to the permanent cache immediately and are not affected
by the result of A.
Fixes#83538
r? `@Aaron1011`
Remove rustc_args_required_const attribute
Now that stdarch no longer needs it (thanks `@Amanieu!),` we can kill the `rustc_args_required_const` attribute. This means that lifetime extension of references to temporaries is the only remaining job that promotion is performing. :-)
r? `@oli-obk`
Fixes https://github.com/rust-lang/rust/issues/69493
This attribute will cause us to invoke evaluate on every where clause of an
invoked function and to generate an error with the result.
Without this, it is very difficult to observe the effects of invoking the trait
evaluator.
Add asm!() support for PowerPC
This includes GPRs and FPRs only.
Note that this does not include PowerPC64.
For my reference, this was mostly duplicated from PR #73214.
Add auto traits and clone trait migrations for RFC2229
This PR
- renames the existent RFC2229 migration `disjoint_capture_drop_reorder` to `disjoint_capture_migration`
- add additional migrations for auto traits and clone trait
Closesrust-lang/project-rfc-2229#29Closesrust-lang/project-rfc-2229#28
r? `@nikomatsakis`
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Remove SpanInterner::get
- It's used exactly once, so it's trivial to replace
- It doesn't match the normal convention for containers: normally
`get()` returns an option and indexing panics. Instead `SpanInterner::get()` panics
and there's no indexing operation available.
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
