Yes, it is important to be careful, but repeated emphasis about it is probably
not helpful — it starts to sound like you came for a tutorial but found a
finger-wagging lecture.
Even after I removed a few of these comments, there are still several left in
the text. That's probably fine! A couple of mentions of how this is dangerous
and you ought to be careful may be a good reminder to the reader.
After making the edits, I reflowed the paragraphs that I had touched, using
emacs's "M-x fill-paragraph", with fill-column equal to 70.
Yes, it is important to be careful, but repeated emphasis about it is probably
not helpful — it starts to sound like you came for a tutorial but found a
finger-wagging lecture.
Even after I removed a few of these comments, there are still several left in
the text. That's probably fine! A couple of mentions of how this is dangerous
and you ought to be careful may be a good reminder to the reader.
After making the edits, I reflowed the paragraphs that I had touched, using
emacs's "M-x fill-paragraph", with fill-column equal to 70.
In line with what @brson, @cmr, @nikomatsakis and I discussed this morning, my
redux of the tutorial will be implemented as the Guide. This way, I can work in
small iterations, rather than dropping a huge PR, which is hard to review. In
addition, the community can observe my work as I'm doing it.
This adds a note in line with [this comment][reddit] that clarifies the state
of the tutorial, and the community's involvement with it.
[reddit]: http://www.reddit.com/r/rust/comments/28bew8/rusts_documentation_is_about_to_drastically/ci9c98k
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
If you define lang items in your crate, add `#[feature(lang_items)]`.
If you define intrinsics (`extern "rust-intrinsic"`), add
`#[feature(intrinsics)]`.
Closes#12858.
[breaking-change]
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
Closes#8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
```test_harness
#[test]
fn foo() {}
```
will now compile and run the tests, rather than just ignoring & stripping them (i.e. it is as if `--test` was passed).
Also, the specific example in https://github.com/rust-lang/rust/issues/12242 was fixed (but that issue is broader than that example).
rustdoc now supports compiling things with `--test` so the examples in
this guide can be compiled & tested properly (revealing a few issues &
out-dated behaviours).
Also, reword an example to be clearer, cc #12242.
This adds the `test_harness` directive that runs a code block using the
test runner, to allow for `#[test]` items to be demonstrated and still
tested (currently they are just stripped and not even compiled, let
alone run).
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
See #14646 (tracking issue) and rust-lang/rfcs#69.
This does not close the tracking issue, as the `bytes!()` macro still needs to be removed. It will be later, after a snapshot is made with the changes in this PR, so that the new syntax can be used when bootstrapping the compiler.
`#[inline(never)]` is used.
Closes#8958.
This can break some code that relied on the addresses of statics
being distinct; add `#[inline(never)]` to the affected statics.
[breaking-change]
Previously, the type system's restrictions on borrowing were summarized as
> The previous example showed that the type system forbids any borrowing of owned boxes found in aliasable, mutable memory.
This did not jive with the example, which allowed mutations so long as the borrowed reference had been returned. Also, the language has changed to no longer allow aliasable mutable locations. This changes the summary to read
> The previous example showed that the type system forbids mutations of owned boxed values while they are being borrowed. In general, the type system also forbids borrowing a value as mutable if it is already being borrowed - either as a mutable reference or an immutable one.
This adds more general information for the experienced reader as well, to offer a more complete understanding.
The guide previously stated:
> The compiler will automatically convert a box box point to a reference like &point.
This fixes the doubled word `box`, so the statement reads
> The compiler will automatically convert a box point to a reference like &point.
The code it is referring to is `compute_distance(&on_the_stack, on_the_heap);`, so a single `box` is appropriate.
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
Previously, the type system's restrictions on borrowing were summarized as
> The previous example showed that the type system forbids any borrowing of owned boxes found in aliasable, mutable memory
This did not jive with the example, which allowed mutations so long as the borrowed reference had been returned. Also, the language has changed to no longer allow aliasable mutable locations. This changes the summary to read
> The previous example showed that the type system forbids mutations of owned boxed values while they are being borrowed. In general, the type system also forbids borrowing a value as mutable if it is already being borrowed - either as a mutable reference or an immutable one.
This adds more general information for the experienced reader as well, to offer a more complete understanding.
The guide previously stated:
> The compiler will automatically convert a box box point to a reference like &point.
This fixes the doubled word `box`, so the statement reads
> The compiler will automatically convert a box point to a reference like &point.
The code it is referring to is `compute_distance(&on_the_stack, on_the_heap);`, so a single `box` is appropriate.
This grows a new option inside of rustdoc to add the ability to submit examples
to an external website. If the `--markdown-playground-url` command line option
or crate doc attribute `html_playground_url` is present, then examples will have
a button on hover to submit the code to the playground specified.
This commit enables submission of example code to play.rust-lang.org. The code
submitted is that which is tested by rustdoc, not necessarily the exact code
shown in the example.
Closes#14654
