Record `LocalDefId` in HIR nodes instead of a side table
This is part of an attempt to remove the `HirId -> LocalDefId` table from HIR.
This attempt is a prerequisite to creation of `LocalDefId` after HIR lowering (https://github.com/rust-lang/rust/pull/96840), by controlling how `def_id` information is accessed.
This first part adds the information to HIR nodes themselves instead of a table.
The second part is https://github.com/rust-lang/rust/pull/103902
The third part will be to make `hir::Visitor::visit_fn` take a `LocalDefId` as last parameter.
The fourth part will be to completely remove the side table.
Reduce span of let else irrefutable_let_patterns warning
Huge spans aren't good for IDE users as they underline constructs that are possibly multiline.
Similar PR to #90761 which did the same for the `unused_macros` lint.
Make `dyn*` casts into a coercion, allow `dyn*` upcasting
I know that `dyn*` is likely not going to be a feature exposed to surface Rust, but this makes it slightly more ergonomic to write tests for these types anyways. ... and this was just fun to implement anyways.
1. Make `dyn*` into a coercion instead of a cast
2. Enable `dyn*` upcasting since we basically get it for free
3. Simplify some of the cast checking code since we're using the coercion path now
r? `@eholk` but feel free to reassign
cc `@nikomatsakis` and `@tmandry` who might care about making `dyn*` casts into a coercion
Suppress irrefutable let patterns lint for prefixes in match guards
In match guards, irrefutable prefixes might use the bindings created by the match pattern. Ideally, we check for this, but we can do the next best thing and just not lint for irrefutable prefixes in match guards.
Fixes#98361
More dupe word typos
I only picked those changes (from the regex search) that I am pretty certain doesn't change meaning and is just a typo fix. Do correct me if any fix is undesirable and I can revert those. Thanks.
In match guards, irrefutable prefixes might use the bindings created
by the match pattern. Ideally, we check for this, but we can do the
next best thing and just not lint for irrefutable prefixes in match
guards.
Remove `mir::CastKind::Misc`
As discussed in #97649 `mir::CastKind::Misc` is not clear, this PR addresses that by creating a new enum variant for every valid cast.
r? ````@oli-obk````
Fix unwind drop glue for if-then scopes
cc `@est31`
Fix#102317Fix#99852
This PR fixes the drop glue for unwinding from a panic originated in a drop while breaking out for the else block in an `if-then` scope.
MIR validation does not fail for the synchronous versions of the test program, because `StorageDead` statements are skipped over in the unwinding process. It is only becoming a problem when it is inside a generator where `StorageDead` must be kept around.
Move lint level source explanation to the bottom
So, uhhhhh
r? `@estebank`
## User-facing change
"note: `#[warn(...)]` on by default" and such are moved to the bottom of the diagnostic:
```diff
- = note: `#[warn(unsupported_calling_conventions)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #87678 <https://github.com/rust-lang/rust/issues/87678>
+ = note: `#[warn(unsupported_calling_conventions)]` on by default
```
Why warning is enabled is the least important thing, so it shouldn't be the first note the user reads, IMO.
## Developer-facing change
`struct_span_lint` and similar methods have a different signature.
Before: `..., impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>)`
After: `..., impl Into<DiagnosticMessage>, impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>`
The reason for this is that `struct_span_lint` needs to edit the diagnostic _after_ `decorate` closure is called. This also makes lint code a little bit nicer in my opinion.
Another option is to use `impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>) -> DiagnosticBuilder<'a, ()>` altough I don't _really_ see reasons to do `let lint = lint.build(message)` everywhere.
## Subtle problem
By moving the message outside of the closure (that may not be called if the lint is disabled) `format!(...)` is executed earlier, possibly formatting `Ty` which may call a query that trims paths that crashes the compiler if there were no warnings...
I don't think it's that big of a deal, considering that we move from `format!(...)` to `fluent` (which is lazy by-default) anyway, however this required adding a workaround which is unfortunate.
## P.S.
I'm sorry, I do not how to make this PR smaller/easier to review. Changes to the lint API affect SO MUCH 😢
`Res::SelfTy` currently has two `Option`s. When the second one is `Some`
the first one is never consulted. So we can split it into two variants,
`Res::SelfTyParam` and `Res::SelfTyAlias`, reducing the size of `Res`
from 24 bytes to 12. This then shrinks `hir::Path` and
`hir::PathSegment`, which are the HIR types that take up the most space.
Fix lint scoping for let-else.
The scoping for let-else is inconsistent with HIR nesting. This creates cases, in `ui/let-else/let-else-allow-unused.rs` for instance, where an `allow` lint attribute does not apply to the bindings created by `let-else`.
This PR is an attempt to correct this.
As there is no lint that currently relies on this, the test for this behaviour is https://github.com/rust-lang/rust/pull/101500.
cc `@dingxiangfei2009` as you filed https://github.com/rust-lang/rust/pull/101894
Avoid duplicating StorageLive in let-else
cc `@est31`
Fix#101867Fix#101932#101410 introduced directives to activate storages of bindings in let-else earlier. However, since it is using the machinery of `match` and friends for pattern matching and binding, those storages are activated for the second time. This PR adjusts this behavior and avoid the duplicated activation for let-else statements.
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
Shrink span for bindings with subpatterns.
Bindings with nested patterns (`binding @ pat` syntax) currently point to the full pattern. This PR proposes to shrink the span to stop before the ````@`.``` This makes the diagnostics for move/mutability conflicts clearer, as they not point to the `binding` only, instead of the full pat.
r? ```@estebank```
`Builder::expr_into_pattern` has a single call site. Currently the
`pattern` argument at the call site is always cloned.
This commit changes things so that we instead do a clone within
`expr_into_pattern`, but only if the pattern has the
`PatKind::AscribeUserType` kind, and we only clone the annotation within
the pattern instead of the entire pattern.
`thir::Pat::kind` is a `Box<PatKind>`, which doesn't follow the usual
pattern in AST/HIR/THIR which is that the "kind" enum for a node is
stored inline within the parent struct.
This commit makes the `PatKind` directly inline within the `Pat`. This
requires using `Box<Pat>` in all the types that hold a `Pat.
Ideally, `Pat` would be stored in `Thir` like `Expr` and `Stmt` and
referred to with a `PatId` rather than `Box<Pat>`. But this is hard to
do because lots of `Pat`s get created after the destruction of the `Cx`
that does normal THIR building. But this does get us a step closer to
`PatId`, because all the `Box<Pat>` occurrences would be replaced with
`PatId` if `PatId` ever happened.
At 128 bytes, `Pat` is large. Subsequent commits will shrink it.
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Replace `Body::basic_blocks()` with field access
Since the refactoring in #98930, it is possible to borrow the basic blocks
independently from other parts of MIR by accessing the `basic_blocks` field
directly.
Replace unnecessary `Body::basic_blocks()` method with a direct field access,
which has an additional benefit of borrowing the basic blocks only.
let-else: break out to one scope higher for let-else
```@est31``` This PR follows up with #99518 which is to break out to the last remainder scope. It breaks to the out-most `region_scope` of the block if the first statement is a `let-else`.
Expand potential inner `Or` pattern for THIR
Code assumed there wouldn't be a deeper `Or` pattern inside expanded `PatStack` this fixes it by looking for the `Or` pattern inside expanded `PatStack`.
A more ideal solution would be recursively doing this but I haven't found a good way to do that.
_fixes #97898_
never consider unsafe blocks unused if they would be required with deny(unsafe_op_in_unsafe_fn)
Judging from https://github.com/rust-lang/rust/issues/71668#issuecomment-1200317370 the consensus nowadays seems to be that we should never consider an unsafe block unused if it was required with `deny(unsafe_op_in_unsafe_fn)`, no matter whether that lint is actually enabled or not. So let's adjust rustc accordingly.
The first commit does the change, the 2nd does some cleanup.
Determine match_has_guard from candidates instead of looking up thir table again
Currently looking through mir build of matches because of interest in deref patterns. Finding some micro-optimizable things.
Enable unused_parens for match arms
Fixes: https://github.com/rust-lang/rust/issues/92751
Currently I can't get the `stderr` to work with `./x.py test`, but this should fix the issue. Help would be appreciated!
Some `is_useful` cleanups
#98582 was reverted because it was a perf regression.
https://github.com/rust-lang/rust/pull/99806 reintroduces the changes, but this PR picks individual ones that have no regressions.
Let-else: break out scopes when a let-else pattern fails to match
This PR will commit to a new behavior so that values from initializer expressions are dropped earlier when a let-else pattern fails to match.
Fix#98672.
Close#93951.
cc `@camsteffen` `@est31`
Deeply deny fn and raw ptrs in const generics
I think this is right -- just because we wrap a fn ptr in a wrapper type does not mean we should allow it in a const parameter.
We now reject both of these in the same way:
```
#![feature(adt_const_params)]
#[derive(Eq, PartialEq)]
struct Wrapper();
fn foo<const W: Wrapper>() {}
fn foo2<const F: fn()>() {}
```
This does regress one test (`src/test/ui/consts/refs_check_const_eq-issue-88384.stderr`), but I'm not sure it should've passed in the first place.
cc: ``@b-naber`` who introduced that test^
fixes#99641
Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
Implement `SourceMap::is_span_accessible`
This patch adds `SourceMap::is_span_accessible` and replaces `span_to_snippet(span).is_ok()` and `span_to_snippet(span).is_err()` with it. This removes a `&str` to `String` conversion.
There are several indications that we should not ZST as a ScalarInt:
- We had two ways to have ZST valtrees, either an empty `Branch` or a `Leaf` with a ZST in it.
`ValTree::zst()` used the former, but the latter could possibly arise as well.
- Likewise, the interpreter had `Immediate::Uninit` and `Immediate::Scalar(Scalar::ZST)`.
- LLVM codegen already had to special-case ZST ScalarInt.
So instead add new ZST variants to those types that did not have other variants
which could be used for this purpose.
This makes it possible to mutably borrow different fields of the MIR
body without resorting to methods like `basic_blocks_local_decls_mut_and_var_debug_info`.
To preserve validity of control flow graph caches in the presence of
modifications, a new struct `BasicBlocks` wraps together basic blocks
and control flow graph caches.
The `BasicBlocks` dereferences to `IndexVec<BasicBlock, BasicBlockData>`.
On the other hand a mutable access requires explicit `as_mut()` call.
lints: mostly translatable diagnostics
As lints are created slightly differently than other diagnostics, intended to try make them translatable first and then look into the applicability of diagnostic structs but ended up just making most of the diagnostics in the crate translatable (which will still be useful if I do make a lot of them structs later anyway).
r? ``@compiler-errors``
Change enum->int casts to not go through MIR casts.
follow-up to https://github.com/rust-lang/rust/pull/96814
this simplifies all backends and even gives LLVM more information about the return value of `Rvalue::Discriminant`, enabling optimizations in more cases.
Rewrite dead-code pass to avoid fetching HIR.
This allows to get a more uniform handling of spans, and to simplify the grouping of diagnostics for variants and fields.
Accept `DiagnosticMessage` in `LintDiagnosticBuilder::build` so that
lints can be built with translatable diagnostic messages.
Signed-off-by: David Wood <david.wood@huawei.com>
Avoid some `&str` to `String` conversions with `MultiSpan::push_span_label`
This patch removes some`&str` to `String` conversions with `MultiSpan::push_span_label`.
Don't omit comma when suggesting wildcard arm after macro expr
* Also adds `Span::eq_ctxt` to consolidate the various usages of `span.ctxt() == other.ctxt()`
* Also fixes an unhygenic usage of spans which caused the suggestion to render weirdly when we had one arm match in a macro
* Also always suggests a comma (i.e. even after a block) if we're rendering a wildcard arm in a single-line match (looks prettier 🌹)
Fixes#94866
Fix `SourceScope` for `if let` bindings.
Fixes#97799.
I'm not sure how to test this properly, is there any way to observe the difference in behavior apart from `ui` tests? I'm worried that they would be overlooked in the case of a regression.
This commit removes the `a == b` early return, which isn't useful in
practice, and replaces it with one that helps matches with many ranges,
including char ranges.
The code is clearer and simpler without it. Note that the `a == b` early
return at the top of the function means the `a == b` test at the end of
the function could never succeed.
It's never executed when running the entire test suite. I think it's
because of the early return at the top of the function if `a.ty() != ty`
succeeds.
This is a performance win for `unicode-normalization`.
The commit also removes the closure, which isn't necessary. And
reformulates the comparison into a form I find easier to read.
Make `ExprKind::Closure` a struct variant.
Simple refactor since we both need it to introduce additional fields in `ExprKind::Closure`.
r? ``@Aaron1011``
And likewise for the `Const::val` method.
Because its type is called `ConstKind`. Also `val` is a confusing name
because `ConstKind` is an enum with seven variants, one of which is
called `Value`. Also, this gives consistency with `TyS` and `PredicateS`
which have `kind` fields.
The commit also renames a few `Const` variables from `val` to `c`, to
avoid confusion with the `ConstKind::Value` variant.
Fix precise field capture of univariant enums
When constructing a MIR from a THIR field expression, introduce an
additional downcast projection before accessing a field of an enum.
When rebasing a place builder on top of a captured place, account for
the fact that a single HIR enum field projection corresponds to two MIR
projection elements: a downcast element and a field element.
Fixes#95271.
Fixes#96299.
Fixes#96512.
Fixes#97378.
r? ``@nikomatsakis`` ``@arora-aman``
Try to cache region_scope_tree as a query
This PR will attempt to restore `region_scope_tree` as a query so that caching works again. It seems that `region_scope_tree` could be re-computed for nested items after all, which could explain the performance regression introduced by #95563.
cc `@Mark-Simulacrum` `@pnkfelix` I will try to trigger a perf run here.
Output correct type responsible for structural match violation
Previously we included the outermost type that caused a structural match violation in the error message and stated that that type must be annotated with `#[derive(Eq, PartialEq)]` even if it already had that annotation. This PR outputs the correct type in the error message.
Fixes https://github.com/rust-lang/rust/issues/97278
Modify MIR building to drop repeat expressions with length zero
Closes#74836 .
Previously, when a user wrote `[foo; 0]` we used to simply leak `foo`. The goal is to fix that. This PR changes MIR building to make `[foo; 0]` equivalent to `{ drop(foo); [] }` in all cases. Of course, this is a breaking change (see below). A crater run did not indicate any regressions though, and given that the previous behavior was almost definitely not what any user wanted, it seems unlikely that anyone was relying on this.
Note that const generics are in general unaffected by this. Inserting the extra `drop` is only meaningful/necessary when `foo` is of a non-`Copy` type, and array repeat expressions with const generic repetition count must always be `Copy`.
Besides the obvious change to behavior associated with the additional drop, there are three categories of examples where this also changes observable behavior. In all of these cases, the new behavior is consistent with what you would get by replacing `[foo; 0]` with `{ drop(foo); [] }`. As such, none of these give the user new powers to express more things.
**No longer allowed in const (breaking)**:
```rust
const _: [String; 0] = [String::new(); 0];
```
This compiles on stable today. Because we now introduce the drop of `String`, this no longer compiles as `String` may not be dropped in a const context.
**Reduced dataflow (non-breaking)**:
```rust
let mut x: i32 = 0;
let r = &x;
let a = [r; 0];
x = 5;
let _b = a;
```
Borrowck rejects this code on stable because it believes there is dataflow between `a` and `r`, and so the lifetime of `r` has to extend to the last statement. This change removes the dataflow and the above code is allowed to compile.
**More const promotion (non-breaking)**:
```rust
let _v: &'static [String; 0] = &[String::new(); 0];
```
This does not compile today because `String` having drop glue keeps it from being const promoted (despite that drop glue never being executed). After this change, this is allowed to compile.
### Alternatives
A previous attempt at this tried to reduce breakage by various tricks. This is still a possibility, but given that crater showed no regressions it seems unclear why we would want to introduce this complexity.
Disallowing `[foo; 0]` completely is also an option, but obviously this is more of a breaking change. I do not know how often this is actually used though.
r? `@oli-obk`
When constructing a MIR from a THIR field expression, introduce an
additional downcast projection before accessing a field of an enum.
When rebasing a place builder on top of a captured place, account for
the fact that a single HIR enum field projection corresponds to two MIR
projection elements: a downcast element and a field element.
correctly deal with user type ascriptions in pat
supersedes #93856
`thir::PatKind::AscribeUserType` previously resulted in `CanonicalUserTypeAnnotations` where the inferred type already had a subtyping relation according to `variance` to the `user_ty`.
The bug can pretty much be summarized as follows:
- during mir building
- `user_ty -> inferred_ty`: considers variance
- `StatementKind::AscribeUserType`: `inferred_ty` is the type of the place, so no variance needed
- during mir borrowck
- `user_ty -> inferred_ty`: does not consider variance
- `StatementKind::AscribeUserType`: applies variance
This mostly worked fine. The lifetimes in `inferred_ty` were only bound by its relation to `user_ty` and to the `place` of `StatementKind::AscribeUserType`, so it doesn't matter where exactly the subtyping happens.
It does however matter when having higher ranked subtying. At this point the place where the subtyping happens is forced, causing this mismatch between building and borrowck to result in unintended errors.
cc #96514 which is pretty much the same issue
r? `@nikomatsakis`
Add EarlyBinder
Chalk has no concept of `Param` (e0ade19d13/chalk-ir/src/lib.rs (L579)) or `ReEarlyBound` (e0ade19d13/chalk-ir/src/lib.rs (L1308)). Everything is just "bound" - the equivalent of rustc's late-bound. It's not completely clear yet whether to move everything to the same time of binder in rustc or add `Param` and `ReEarlyBound` in Chalk.
Either way, tracking when we have or haven't already substituted out these in rustc can be helpful.
As a first step, I'm just adding a `EarlyBinder` newtype that is required to call `subst`. I also add a couple "transparent" `bound_*` wrappers around a couple query that are often immediately substituted.
r? `@nikomatsakis`
don't encode only locally used attrs
Part of https://github.com/rust-lang/compiler-team/issues/505.
We now filter builtin attributes before encoding them in the crate metadata in case they should only be used in the local crate. To prevent accidental misuse `get_attrs` now requires the caller to state which attribute they are interested in. For places where that isn't trivially possible, I've added a method `fn get_attrs_unchecked` which I intend to remove in a followup PR.
After this pull request landed, we can then slowly move all attributes to only be used in the local crate while being certain that we don't accidentally try to access them from extern crates.
cc https://github.com/rust-lang/rust/pull/94963#issuecomment-1082924289
Use `FxIndexSet` to avoid sorting fake borrows
This fixes#96449, but I haven't yet been able to
make the reproducer work using `#[cfg]` attributes,
so we can't use the 'revision' infra to write a test
The previous implementation relied on sorting by `PlaceRef`.
This requires sorting by a `DefId`, which uses untracked state
(see #93315)
This fixes#96449, but I haven't yet been able to
make the reproducer work using `#[cfg]` attributes,
so we can't use the 'revision' infra to write a test
The previous implementation relied on sorting by `PlaceRef`.
This requires sorting by a `DefId`, which uses untracked state
(see #93315)
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Only crate root def-ids don't have a parent, and in majority of cases the argument of `DefIdTree::parent` cannot be a crate root.
So we now panic by default in `parent` and introduce a new non-panicing function `opt_parent` for cases where the argument can be a crate root.
Same applies to `local_parent`/`opt_local_parent`.
Check if call return type is visibly uninhabited when building MIR
The main motivation behind the change is to expose information about diverging
calls to the generator transform and match the precision of drop range tracking
which already understands that call expressions with visibly uninhabited types
diverges.
This change should also accept strictly more programs than before. That is
programs that were previously rejected due to errors raised by control-flow
sensitive checks in a code that is no longer considered reachable.
Fixes#93161.
Implement sym operands for global_asm!
Tracking issue: #93333
This PR is pretty much a complete rewrite of `sym` operand support for inline assembly so that the same implementation can be shared by `asm!` and `global_asm!`. The main changes are:
- At the AST level, `sym` is represented as a special `InlineAsmSym` AST node containing a path instead of an `Expr`.
- At the HIR level, `sym` is split into `SymStatic` and `SymFn` depending on whether the path resolves to a static during AST lowering (defaults to `SynFn` if `get_early_res` fails).
- `SymFn` is just an `AnonConst`. It runs through typeck and we just collect the resulting type at the end. An error is emitted if the type is not a `FnDef`.
- `SymStatic` directly holds a path and the `DefId` of the `static` that it is pointing to.
- The representation at the MIR level is mostly unchanged. There is a minor change to THIR where `SymFn` is a constant instead of an expression.
- At the codegen level we need to apply the target's symbol mangling to the result of `tcx.symbol_name()` depending on the target. This is done by calling the LLVM name mangler, which handles all of the details.
- On Mach-O, all symbols have a leading underscore.
- On x86 Windows, different mangling is used for cdecl, stdcall, fastcall and vectorcall.
- No mangling is needed on other platforms.
r? `@nagisa`
cc `@eddyb`
Use mir constant in thir instead of ty::Const
This is blocked on https://github.com/rust-lang/rust/pull/94059 (does include its changes, the first two commits in this PR correspond to those changes) and https://github.com/rust-lang/rust/pull/93800 being reinstated (which had to be reverted). Mainly opening since `@lcnr` offered to give some feedback and maybe also for a perf-run (if necessary).
This currently contains a lot of duplication since some of the logic of `ty::Const` had to be copied to `mir::ConstantKind`, but with the introduction of valtrees a lot of that functionality will disappear from `ty::Const`.
Only the last commit contains changes that need to be reviewed here. Did leave some `FIXME` comments regarding future implementation decisions and some things that might be incorrectly implemented.
r? `@oli-obk`
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
Spellchecking compiler comments
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
