The discussion seems to have resolved that this lint is a bit "noisy" in
that applying it in all places would result in a reduction in
readability.
A few of the trivial functions (like `Path::new`) are fine to leave
outside of closures.
The general rule seems to be that anything that is obviously an
allocation (`Box`, `Vec`, `vec![]`) should be in a closure, even if it
is a 0-sized allocation.
Add comments to explain memory usage optimization
Add explanatory comments so that people understand that it's just an optimization and doesn't affect behavior.
rustc_target: Further cleanup use of target options
Follow up to https://github.com/rust-lang/rust/pull/77729.
Implements items 2 and 4 from the list in https://github.com/rust-lang/rust/pull/77729#issue-500228243.
The first commit collapses uses of `target.options.foo` into `target.foo`.
The second commit renames some target options to avoid tautology:
`target.target_endian` -> `target.endian`
`target.target_c_int_width` -> `target.c_int_width`
`target.target_os` -> `target.os`
`target.target_env` -> `target.env`
`target.target_vendor` -> `target.vendor`
`target.target_family` -> `target.os_family`
`target.target_mcount` -> `target.mcount`
r? `@Mark-Simulacrum`
Assert that a return place is not used for indexing during integration
The inliner integrates call destination place with callee return place
by remapping the local and adding extra projections as necessary.
If a call destination place contains any projections (which is already
possible) and a return place is used in an indexing projection (most
likely doesn't happen yet) the end result would be incorrect.
Add an assertion to ensure that potential issue won't go unnoticed in
the presence of more sophisticated copy propagation scheme.
Make it more clear what an about async fn's returns when referring to what it returns
see #76547
This is *likely* not the ONLY place that this happens to be unclear, but we can move this fn to rustc_middle or something like that and reuse it if need be, to apply it to more diagnostics
One outstanding question I have is, if the fn returns (), should I make the message more clear (what about `fn f()` vs `fn f() -> ()`, can you tell those apart in the hir?)
R? `@tmandry`
`@rustbot` modify labels +A-diagnostics +T-compiler
Monomorphize a type argument of size-of operation during codegen
This wasn't necessary until MIR inliner started to consider drop glue as
a candidate for inlining; introducing for the first time a generic use
of size-of operation.
No test at this point since this only happens with a custom inlining
threshold.
rustc_ast: Do not panic by default when visiting macro calls
Panicking by default made sense when we didn't have HIR or MIR and everything worked on AST, but now all AST visitors run early and majority of them have to deal with macro calls, often by ignoring them.
The second commit renames `visit_mac` to `visit_mac_call`, the corresponding structures were renamed earlier in https://github.com/rust-lang/rust/pull/69589.
inliner: Break inlining cycles
Keep track of all instances inlined so far. When examining a new call
sites from an inlined body, skip those where callee had been inlined
already to avoid potential inlining cycles.
Fixes#78573.
Improve lifetime name annotations for closures & async functions
* Don't refer to async functions as "generators" in error output
* Where possible, emit annotations pointing exactly at the `&` in the return type of closures (when they have explicit return types) and async functions, like we do for arguments.
Addresses #74072, but I wouldn't call that *closed* until annotations are identical for async and non-async functions.
* Emit a better annotation when the lifetime doesn't appear in the full name type, which currently happens for opaque types like `impl Future`. Addresses #74497, but further improves could probably be made (why *doesn't* it appear in the type as `impl Future + '1`?)
This is included in the same PR because the changes to `give_name_if_anonymous_region_appears_in_output` would introduce ICE otherwise (it would return `None` in cases where it didn't previously, which then gets `unwrap`ped)
Implement destructuring assignment for tuples
This is the first step towards implementing destructuring assignment (RFC: https://github.com/rust-lang/rfcs/pull/2909, tracking issue: #71126). This PR is the first part of #71156, which was split up to allow for easier review.
Quick summary: This change allows destructuring the LHS of an assignment if it's a (possibly nested) tuple.
It is implemented via a desugaring (AST -> HIR lowering) as follows:
```rust
(a,b) = (1,2)
```
... becomes ...
```rust
{
let (lhs0,lhs1) = (1,2);
a = lhs0;
b = lhs1;
}
```
Thanks to `@varkor` who helped with the implementation, particularly around default binding modes.
r? `@petrochenkov`
inliner: Use substs_for_mir_body
Changes from 68965 extended the kind of instances that are being
inlined. For some of those, the `instance_mir` returns a MIR body that
is already expressed in terms of the types found in substitution array,
and doesn't need further substitution.
Use `substs_for_mir_body` to take that into account.
Resolves#78529.
Resolves#78560.
Fix handling of item names for HIR
- Handle variants, fields, macros in `Node::ident()`
- Handle the crate root in `opt_item_name`
- Rewrite `item_name` in terms of `opt_item_name`
I need this for both https://github.com/rust-lang/rust/pull/77820 and https://github.com/rust-lang/rust/pull/78082, so splitting it out into a separate PR so it can land early.
Recognize `private_intra_doc_links` as a lint
Previously, trying to allow this would give another error!
```
warning: unknown lint: `private_intra_doc_links`
--> private.rs:1:10
|
1 | #![allow(private_intra_doc_links)]
| ^^^^^^^^^^^^^^^^^^^^^^^ help: did you mean: `broken_intra_doc_links`
|
= note: `#[warn(unknown_lints)]` on by default
warning: public documentation for `DocMe` links to private item `DontDocMe`
--> private.rs:2:11
|
2 | /// docs [DontDocMe]
| ^^^^^^^^^ this item is private
|
= note: `#[warn(private_intra_doc_links)]` on by default
= note: this link will resolve properly if you pass `--document-private-items`
```
Fixes the issue found in https://github.com/rust-lang/rust/pull/77249#issuecomment-712339227.
r? ````````@Manishearth````````
Does anyone know why this additional step is necessary? It seems weird this has to be declared in 3 different places.
Refactor IntErrorKind to avoid "underflow" terminology
This PR is a continuation of #76455
# Changes
- `Overflow` renamed to `PosOverflow` and `Underflow` renamed to `NegOverflow` after discussion in #76455
- Changed some of the parsing code to return `InvalidDigit` rather than `Empty` for strings "+" and "-". https://users.rust-lang.org/t/misleading-error-in-str-parse-for-int-types/49178
- Carry the problem `char` with the `InvalidDigit` variant.
- Necessary changes were made to the compiler as it depends on `int_error_matching`.
- Redid tests to match on specific errors.
r? ```@KodrAus```
When examining candidates for inlining, reject those that are determined
to be recursive either because of self-recursive calls or calls to any
instances already inlined.
rustc_ast: Visit tokens stored in AST nodes in mutable visitor
After #77271 token visiting is enabled only for one visitor in `rustc_expand\src\mbe\transcribe.rs` which applies hygiene marks to tokens produced by declarative macros (`macro_rules` or `macro`), so this change doesn't affect anything else.
When a macro has some interpolated token from an outer macro in its output
```rust
macro inner() {
$interpolated
}
```
we can use the usual interpretation of interpolated tokens in token-based model - a None-delimited group - to write this macro in an equivalent form
```rust
macro inner() {
⟪ a b c d ⟫
}
```
When we are expanding the macro `inner` we need to apply hygiene marks to all tokens produced by it, including the tokens inside the group.
Before this PR we did this by visiting the AST piece inside the interpolated token and applying marks to all spans in it.
I'm not sure this is 100% correct (ideally we should apply the marks to tokens and then re-parse the AST from tokens), but it's a very good approximation at least.
We didn't however apply the marks to actual tokens stored in the nonterminal, so if we used the nonterminal as a token rather than as an AST piece (e.g. passed it to a proc macro), then we got hygiene bugs.
This PR applies the marks to tokens in addition to the AST pieces thus fixing the issue.
r? `@Aaron1011`
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
Rollup of 19 pull requests
Successful merges:
- #76097 (Stabilize hint::spin_loop)
- #76227 (Stabilize `Poll::is_ready` and `is_pending` as const)
- #78065 (make concurrency helper more pleasant to read)
- #78570 (Remove FIXME comment in print_type_sizes ui test suite)
- #78572 (Use SOCK_CLOEXEC and accept4() on more platforms.)
- #78658 (Add a tool to run `x.py` from any subdirectory)
- #78706 (Fix run-make tests running when LLVM is disabled)
- #78728 (Constantify `UnsafeCell::into_inner` and related)
- #78775 (Bump Rustfmt and RLS)
- #78788 (Correct unsigned equivalent of isize to be usize)
- #78811 (Make some std::io functions `const`)
- #78828 (use single char patterns for split() (clippy::single_char_pattern))
- #78841 (Small cleanup in `TypeFoldable` derive macro)
- #78842 (Honor the rustfmt setting in config.toml)
- #78843 (Less verbose debug logging from inlining integrator)
- #78852 (Convert a bunch of intra-doc links)
- #78860 (rustc_resolve: Use `#![feature(format_args_capture)]`)
- #78861 (typo and formatting)
- #78865 (Don't fire `CONST_ITEM_MUTATION` lint when borrowing a deref)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Don't fire `CONST_ITEM_MUTATION` lint when borrowing a deref
Fixes#78819
This extends the check for dereferences added in PR #77324
to cover mutable borrows, as well as direct writes. If we're operating
on a dereference of a `const` item, we shouldn't be firing the lint.
rustc_resolve: Use `#![feature(format_args_capture)]`
This is the best new sugar for quite some time.
(I only changed places that already used named arguments.)
Less verbose debug logging from inlining integrator
The inlining integrator produces relatively verbose and uninteresting
logs. Move them from a debug log level to a trace level, so that they
can be easily isolated from others.
revert #75443, update mir validator
This PR reverts rust-lang#75443 to fix rust-lang#75992 and instead uses rust-lang#75419 to fix rust-lang#75313.
Adapts rust-lang#75419 to correctly deal with unevaluated constants as otherwise some `feature(const_evaluatable_checked)` tests would ICE.
Note that rust-lang#72793 was also fixed by rust-lang#75443, but as that issue only concerns `feature(type_alias_impl_trait)` I deleted that test case for now and would reopen that issue.
rust-lang#75443 may have also allowed some other code to now successfully compile which would make this revert a breaking change after 2 stable versions, but I hope that this is a purely theoretical concern.
See https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/generator.20upvars/near/214617274 for more reasoning about this.
r? `@nikomatsakis` `@eddyb` `@RalfJung`
rustc_target: Move some target options from `Target` to `TargetOptions`
The only reason for `Target` to `TargetOptions` to be separate structures is that options in `TargetOptions` have reasonable defaults and options in `Target` don't.
(Otherwise all the options logically belong to a single `Target` struct.)
This PR moves a number of options with reasonable defaults from `Target` to `TargetOptions`, so they no longer needs to be specified explicitly for majority of the targets.
The move also allows to inherit the options from `rustc_target/src/spec/*_base.rs` files in a nicer way.
I didn't change any specific option values here.
The moved options are `target_c_int_width` (defaults to `"32"`), `target_endian` (defaults to `"little"`), `target_os` (defaults to `"none"`), `target_env` (defaults to `""`), `target_vendor` (defaults to `"unknown"`) and `linker_flavor` (defaults to `LinkerFlavor::Gcc`).
Next steps (in later PRs):
- Find a way to merge `TargetOptions` into `Target`
- If not, always access `TargetOptions` fields through `Deref` making it a part of `Target` at least logically (`session.target.target.options.foo` -> `session.target.target.foo`)
- ~Eliminate `session::config::Config` and use `Target` instead (`session.target.target.foo` -> `session.target.foo`)~ Done in https://github.com/rust-lang/rust/pull/77943.
- Avoid tautologies in option names (`target.target_os` -> `target.os`)
- Resolve _ https://github.com/rust-lang/rust/issues/77730 (rustc_target: The differences between `target_os = "none"` and `target_os = "unknown"`, and `target_vendor = "unknown"` and `target_vendor = ""` are unclear) noticed during implementation of this PR.
Fixes#78819
This extends the check for dereferences added in PR #77324
to cover mutable borrows, as well as direct writes. If we're operating
on a dereference of a `const` item, we shouldn't be firing the lint.
Revert "Revert "resolve: Avoid "self-confirming" import resolutions in one more case""
Specifically, this reverts commit b20bce8ce5 from #77421 to fix#77586.
The lang team has decided that for the time being we want to avoid the breakage here (perhaps for a future edition; though almost certainly not the upcoming one), though a future PR may want to add a lint around this case (and perhaps others) which are unlikely to be readable code.
r? `@petrochenkov` to confirm this is the right way to fix#77586.
The inlining integrator produces relatively verbose and uninteresting
logs. Move them from a debug log level to a trace level, so that they
can be easily isolated from others.
- Handle variants, fields, macros in `Node::ident()`
- Handle the crate root in `opt_item_name`
- Factor out `item_name_from_def_id` to reduce duplication
- Look at HIR before the DefId for `opt_item_name`
This gives accurate spans, which are not available from serialized
metadata.
- Don't panic on the crate root in `opt_item_name`
- Add comments
