for cases where it's hard to decide what id to use for the lookup); modify
irrefutable bindings code to move or copy depending on the type, rather than
threading through a flag. Also updates how local variables and arguments are
registered. These changes were hard to isolate.
The free-standing functions in f32, f64, i8, i16, i32, i64, u8, u16,
u32, u64, float, int, and uint are replaced with generic functions in
num instead.
If you were previously using any of those functions, just replace them
with the corresponding function with the same name in num.
Note: If you were using a function that corresponds to an operator, use
the operator instead.
We currently still handle immediate return values a lot like
non-immediate ones. We provide a slot for them and store them into
memory, often just to immediately load them again. To improve this
situation, trans_call_inner has to return a Result which contains the
immediate return value.
Also, it also needs to accept "No destination" in addition to just
SaveIn and Ignore. Since "No destination" isn't something that fits
well into the Dest type, I've chosen to simply use Option<Dest>
instead, paired with an assertion that checks that "None" is only
allowed for immediate return values.
There's no need to allocate a return slot for anykind of immediate
return value, not just not for nils. Also, when the return value is
ignored, we only have to copy it to a temporary alloca if it's actually
required to call drop_ty on it.
This is work continued from the now landed #7495 and #7521 pulls.
Removing the headers from unique vectors is another project, so I've separated the allocator.
This way when you compile with -Z trans-stats you'll get a per-function cost breakdown, sorted with the most expensive functions first. Should help highlight pathological code.
Currently, scopes are tied to LLVM basic blocks. For each scope, there
are two new basic blocks, which means two extra jumps in the unoptimized
IR. These blocks aren't actually required, but only used to act as the
boundary for cleanups.
By keeping track of the current scope within a single basic block, we
can avoid those extra blocks and jumps, shrinking the pre-optimization
IR quite considerably. For example, the IR for trans_intrinsic goes
from ~22k lines to ~16k lines, almost 30% less.
The impact on the build times of optimized builds is rather small (about
1%), but unoptimized builds are about 11% faster. The testsuite for
unoptimized builds runs between 15% (CPU time) and 7.5% (wallclock time on
my i7) faster.
Also, in some situations this helps LLVM to generate better code by
inlining functions that it previously considered to be too large.
Likely because of the pointless blocks/jumps that were still present at
the time the inlining pass runs.
Refs #7462
Currently, scopes are tied to LLVM basic blocks. For each scope, there
are two new basic blocks, which means two extra jumps in the unoptimized
IR. These blocks aren't actually required, but only used to act as the
boundary for cleanups.
By keeping track of the current scope within a single basic block, we
can avoid those extra blocks and jumps, shrinking the pre-optimization
IR quite considerably. For example, the IR for trans_intrinsic goes
from ~22k lines to ~16k lines, almost 30% less.
The impact on the build times of optimized builds is rather small (about
1%), but unoptimized builds are about 11% faster. The testsuite for
unoptimized builds runs between 15% (CPU time) and 7.5% (wallclock time on
my i7) faster.
Also, in some situations this helps LLVM to generate better code by
inlining functions that it previously considered to be too large.
Likely because of the pointless blocks/jumps that were still present at
the time the inlining pass runs.
Refs #7462
Also, makes the pretty-printer use & instead of @ as much as possible,
which will help with later changes, though in the interim has produced
some... interesting constructs.
After getting an ICE trying to use the `Repr` enum from middle::trans::adt (see issue #7527), I tried to implement the missing case for struct-like enum variants in `middle::ty::enum_variants()`. It seems to work now (and passes make check) but there are still some uncertainties that bother me:
+ I'm not sure I did everything, right. Especially getting the variant constructor function from the variant node id is just copied from the tuple-variant case. Someone with more experience in the code base should be able to see rather quickly whether this OK so.
+ It is kind of strange that I could not reproduce the ICE with a smaller test case. The unimplemented code path never seems to be hit in most cases, even when using the exact same `Repr` enum, just with `ty::t` replaced by an opaque pointer. Also, within the `adt` module, `Repr` and matching on it is used multiple times, again without running into problems. Can anyone explain why this is the case? That would be much appreciated.
Apart from that, I hope this PR is useful.
This a followup to #7510. @catamorphism requested a test - so I have created one, but in doing so I noticed some inconsistency in the error messages resulting from referencing nonexistent traits, so I changed the messages to be more consistent.
Change the signature of Iterator.size_hint() to always have a lower bound.
Implement .size_hint() on all remaining iterators (if it differs from the default).
Adds a lint for `static some_lowercase_name: uint = 1;`. Warning by default since it causes confusion, e.g. `static a: uint = 1; ... let a = 2;` => `error: only refutable patterns allowed here`.
I think it's WIP - but I wanted to ask for feedback (/cc @thestinger)
I had to move the impl of FromIter for vec into extra::iter because I don't think std can depend on extra, but that's a bit messed up. Similarly some FromIter uses are gone now, not sure if this is fixable or if I made a complete mess here..
common supertypes.
This was breaking with the change to regions because of the
(now incorrect) assumpton that our inference code makes,
which is that if a <: b succeeds, there is no need to compute
the LUB/GLB.
This patch makes error handling for region inference failures more
uniform by not reporting *any* region errors until the reigon inference
step. This requires threading through more information about what
caused a region constraint, so that we can still give informative
error messages.
I have only taken partial advantage of this information: when region
inference fails, we still report the same error we always did, despite
the fact that we now know precisely what caused the various constriants
and what the region variable represents, which we did not know before.
This change is required not only to improve error messages but
because the region hierarchy is not in fact fully known until regionck,
because it is not clear where closure bodies fit in (our current
treatment is unsound). Moreover, the relationships between free variables
cannot be fully determined until type inference is otherwise complete.
cc #3238.
@catamorphism, this re-enables threadsafe rustpkg tests, @brson this will fail unless the bots have LLVM rebuilt, so this is a good indicator of whether that happened or not.
Continuation of #7430.
I haven't removed the `map` method, since the replacement `v.iter().transform(f).collect::<~[SomeType]>()` is a little ridiculous at the moment.
With these changes, exchange allocator headers are never initialized, read or written to. Removing the header will now just involve updating the code in trans using an offset to only do it if the type contained is managed.
The only thing blocking removing the initialization of the last field in the header was ~fn since it uses it to store the dynamic size/types due to captures. I temporarily switched it to a `closure_exchange_alloc` lang item (it uses the same `exchange_free`) and #7496 is filed about removing that.
Since the `exchange_free` call is now inlined all over the codebase, I don't think we should have an assert for null. It doesn't currently ever happen, but it would be fine if we started generating code that did do it. The `exchange_free` function also had a comment declaring that it must not fail, but a regular assert would cause a failure. I also removed the atomic counter because valgrind can already find these leaks, and we have valgrind bots now.
Note that exchange free does not currently print an error an out-of-memory when it aborts, because our `io` code may allocate. We could probably get away with a `#[rust_stack]` call to a `stdio` function but it would be better to make a write system call.
Currently we pass all "self" arguments by reference, for the pointer
variants this means that we end up with double indirection which causes
a unnecessary performance hit.
The fix itself is pretty straight-forward and just means that "self"
needs to be handled like any other argument, except for by-value "self"
which still needs to be passed by reference. This is because
non-pointer types can't just be stuffed into the environment slot which
is used to pass "self".
What made things tricky is that there was also a bug in the typechecker
where the method map entries are created. For type impls, that stored
the base type instead of the actual self-type in the method map, e.g.
Foo instead of &Foo for &self. That worked with pass-by-reference, but
fails with pass-by-value which needs the real type.
Code that makes use of methods seems to be about 10% faster with this
change. Also, build times are reduced by about 4%.
Fixes#4355, #4402, #5280, #4406 and #7285
Currently we pass all "self" arguments by reference, for the pointer
variants this means that we end up with double indirection which causes
a unnecessary performance hit.
The fix itself is pretty straight-forward and just means that "self"
needs to be handled like any other argument, except for by-value "self"
which still needs to be passed by reference. This is because
non-pointer types can't just be stuffed into the environment slot which
is used to pass "self".
What made things tricky is that there was also a bug in the typechecker
where the method map entries are created. For type impls, that stored
the base type instead of the actual self-type in the method map, e.g.
Foo instead of &Foo for &self. That worked with pass-by-reference, but
fails with pass-by-value which needs the real type.
Code that makes use of methods seems to be about 10% faster with this
change. Also, build times are reduced by about 4%.
Fixes#4355, #4402, #5280, #4406 and #7285
The code that tried to revoke the cleanup for the self argument tried
to use "llself" to do so, but the cleanup might actually be registered
with a different ValueRef due to e.g. casting. Currently, this is
worked around by early revocation of the cleanup for self in
trans_self_arg.
To handle this correctly, we have to put the ValueRef for the cleanup
into the MethodData, so trans_call_inner can use it to revoke the
cleanup when it's actually supposed to.
"self" is always passed as an opaque box, so there's no point in using
the concrete self type when translating the argument. All it does it
causing the value to be casted back to an opaque box right away.
The commit f9a5453 is meant to be a temporary hold-over. Whether or not there is added a way for the compiler to "implicitly borrow" stack closures in this way, there should be a codegen optimization that prevents having to traverse possibly-very-many function pointers to find the function you ultimately wanted to call. I tried to separate out the changes so this particular commit could be straight-up reverted if auto-borrowing happens in the future.
r? @nikomatsakis
@graydon suggested that once closures not be part of the language for 1.0, but that they might be hidden behind a -Z compile flag as an "experimental feature" in case people decide they need them.
Regardless of whether ```-Z once-fns``` is set, this PR will parse the ```once``` keyword and will prevent closures labelled with it from being called more than once. It will also permit moving out of captured vars in heap closures, just to let the runtime writers stop using ```Cell``` sooner. Setting ```-Z once-fns``` only toggles whether the move-out-from-capture privilege is also given for stack closures.
r? @nikomatsakis
This fixes a bunch of default method bugs and restructures how vtable resolutions are represented.
(It also adds a depth counter to llvm::type_to_str as a hacky work around for our circular llvm types. This is related in the sense that I needed to do it to make debug tracing not cause rustc to crash after running out of stack space.)
Instead of determining paths from the path tag, we iterate through
modules' children recursively in the metadata. This will allow for
lazy external module resolution.
This removes the `namegen` thunk that was in `common.rs`. I also take the opportunity to refactor a few uses where we had a `str -> ident -> str` chain that seemed somewhat redundant to me.
Also cleans up some warnings that made their way in already.
Mostly just low-haning fruit, i.e. function arguments that were @ even
though & would work just as well.
Reduces librustc.so size by 200k when compiling without -O, by 100k when
compiling with -O.
Mostly just low-haning fruit, i.e. function arguments that were @ even
though & would work just as well.
Reduces librustc.so size by 200k when compiling without -O, by 100k when
compiling with -O.
r? @brson (or @graydon if available) rustpkg/api.rs provides functions intended for package scripts to call.
It will probably need more functionality added to it later, but this is
a start.
Added a test case checking that a package script can use the API.
Closes#6401
This allows macros to both be conditionally defined, and expand
to items with #[cfg]'s.
This seems to have a performance improvement, e.g. for `std`:
```
# Before
time: 1.660 s expansion
time: 0.125 s configuration
# After
time: 0.080 s configuration 1
time: 1.127 s expansion
time: 0.132 s configuration 2
```
And for `extra`:
```
# Before
time: 0.593 s expansion
time: 0.062 s configuration
# After
time: 0.047 s configuration 1
time: 0.147 s expansion
time: 0.058 s configuration 2
```
(This seems a little peculiar, but it is possibly because the expansion AST traversal is very slow, so removing as much as possible as early as possible has big benefits.)
This PR contains no real code changes. Just some documentation additions in the form of comments and some internal reordering of functions within debuginfo.rs.
rustpkg/api.rs provides functions intended for package scripts to call.
It will probably need more functionality added to it later, but this is
a start.
Added a test case checking that a package script can use the API.
Closes#6401
Fix#7322.
I started out with a band-aid approach to special-case the duplicate module error using `is_duplicate_module`, but thought this would be better in the long term.
The "first definition of ..." error string reported by add_child() looks
different from similar messages reported by other functions. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
add_child() is responsible for reporting errors about type, value, and
module duplicate definitions. Although it checks for all three, it uses
namespace_to_str() to convert a Namespace value into a string before
printing an error like:
error: duplicate definition of type `foo`
^^^^
note: first definition of type foo here:
^^^^
Unfortunately, this string can only be one of "type" or
"value" (corresponding to TypeNS and ValueNS respectively), and it
reports duplicate modules as duplicate types.
To alleviate the problem, define a special NamespaceError enum to define
more specialized errors, and use it instead of attempting to reuse the
Namespace enum.
Reported-by: Corey Richardson <corey@octayn.net>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
This adds a `#[no_drop_flag]` attribute. This attribute tells the compiler to omit the drop flag from the struct, if it has a destructor. When the destructor is run, instead of setting the drop flag, it instead zeroes-out the struct. This means the destructor can run multiple times and therefore it is up to the developer to use it safely.
The primary usage case for this is smart-pointer types like `Rc<T>` as the extra flag caused the struct to be 1 word larger because of alignment.
This closes#7271 and #7138
This sets the `get_tydesc()` return type correctly and removes the intrinsic module. See #3730, #3475.
Update: this now also removes the unused shape fields in tydescs.
This adds both `static mut` items and `static mut` foreign items. This involved changing far less code than I thought it was going to, but the tests seem to pass and the variables seem functional.
I'm more than willing to write more tests, so suggestions are welcome!
Closes#553
