This commit removes all internal support for the previously used __log_level()
expression. The logging subsystem was previously modified to not rely on this
magical expression. This also removes the only other function to use the
module_data map in trans, decl_gc_metadata. It appears that this is an ancient
function from a GC only used long ago.
This does not remove the crate map entirely, as libgreen still uses it to hook
in to the event loop provided by libgreen.
This commit moves all logging out of the standard library into an external
crate. This crate is the new crate which is responsible for all logging macros
and logging implementation. A few reasons for this change are:
* The crate map has always been a bit of a code smell among rust programs. It
has difficulty being loaded on almost all platforms, and it's used almost
exclusively for logging and only logging. Removing the crate map is one of the
end goals of this movement.
* The compiler has a fair bit of special support for logging. It has the
__log_level() expression as well as generating a global word per module
specifying the log level. This is unfairly favoring the built-in logging
system, and is much better done purely in libraries instead of the compiler
itself.
* Initialization of logging is much easier to do if there is no reliance on a
magical crate map being available to set module log levels.
* If the logging library can be written outside of the standard library, there's
no reason that it shouldn't be. It's likely that we're not going to build the
highest quality logging library of all time, so third-party libraries should
be able to provide just as high-quality logging systems as the default one
provided in the rust distribution.
With a migration such as this, the change does not come for free. There are some
subtle changes in the behavior of liblog vs the previous logging macros:
* The core change of this migration is that there is no longer a physical
log-level per module. This concept is still emulated (it is quite useful), but
there is now only a global log level, not a local one. This global log level
is a reflection of the maximum of all log levels specified. The previously
generated logging code looked like:
if specified_level <= __module_log_level() {
println!(...)
}
The newly generated code looks like:
if specified_level <= ::log::LOG_LEVEL {
if ::log::module_enabled(module_path!()) {
println!(...)
}
}
Notably, the first layer of checking is still intended to be "super fast" in
that it's just a load of a global word and a compare. The second layer of
checking is executed to determine if the current module does indeed have
logging turned on.
This means that if any module has a debug log level turned on, all modules
with debug log levels get a little bit slower (they all do more expensive
dynamic checks to determine if they're turned on or not).
Semantically, this migration brings no change in this respect, but
runtime-wise, this will have a perf impact on some code.
* A `RUST_LOG=::help` directive will no longer print out a list of all modules
that can be logged. This is because the crate map will no longer specify the
log levels of all modules, so the list of modules is not known. Additionally,
warnings can no longer be provided if a malformed logging directive was
supplied.
The new "hello world" for logging looks like:
#[phase(syntax, link)]
extern crate log;
fn main() {
debug!("Hello, world!");
}
This commit shreds all remnants of libextra from the compiler and standard
distribution. Two modules, c_vec/tempfile, were moved into libstd after some
cleanup, and the other modules were moved to separate crates as seen fit.
Closes#8784Closes#12413Closes#12576
The `~str` type is not long for this world as it will be superseded by the
soon-to-come DST changes for the language. The new type will be
`~Str`, and matching over the allocation will no longer be supported.
Matching on `&str` will continue to work, in both a pre and post DST world.
There is a broader revision (that does this across the board) pending
in #12675, but that is awaiting the arrival of more data (to decide
whether to keep OptVec alive by using a non-Vec internally).
For this code, the representation of lifetime lists needs to be the
same in both ScopeChain and in the ast and ty structures. So it
seemed cleanest to just use `vec_ng::Vec`, now that it has a cheaper
empty representation than the current `vec` code.
This is needed to make progress on #10296 as the default bounds will no longer
include Send. I believe that this was the originally intended syntax for procs,
and it just hasn't been necessary up until now.
This is needed to make progress on #10296 as the default bounds will no longer
include Send. I believe that this was the originally intended syntax for procs,
and it just hasn't been necessary up until now.
This should be called far less than it is because it does expensive OS
interactions and seeding of the internal RNG, `task_rng` amortises this
cost. The main problem is the name is so short and suggestive.
The direct equivalent is `StdRng::new`, which does precisely the same
thing.
The deprecation will make migrating away from the function easier.
Previously `ast::Arm` was always storing a single `ast::Expr` wrapped in an
`ast::Block` (for historical reasons, AIUI), so we might as just store
that expr directly.
Closes#3085.
Formatting via reflection has been a little questionable for some time now, and
it's a little unfortunate that one of the standard macros will silently use
reflection when you weren't expecting it. This adds small bits of code bloat to
libraries, as well as not always being necessary. In light of this information,
this commit switches assert_eq!() to using {} in the error message instead of
{:?}.
In updating existing code, there were a few error cases that I encountered:
* It's impossible to define Show for [T, ..N]. I think DST will alleviate this
because we can define Show for [T].
* A few types here and there just needed a #[deriving(Show)]
* Type parameters needed a Show bound, I often moved this to `assert!(a == b)`
* `Path` doesn't implement `Show`, so assert_eq!() cannot be used on two paths.
I don't think this is much of a regression though because {:?} on paths looks
awful (it's a byte array).
Concretely speaking, this shaved 10K off a 656K binary. Not a lot, but sometime
significant for smaller binaries.
This helps prevent interleaving of error messages when running rustdoc tests.
This has an interesting bit of shuffling with I/O handles, but other than that
this is just using the APIs laid out in the previous commit.
Closes#12623
This commit alters the diagnostic emission machinery to be focused around a
Writer for emitting errors. This allows it to not hard-code emission of errors
to stderr (useful for other applications).
The pretty printer was treating block comments with more than two
asterisks after the first slash (e.g. `/***`) as doc comments (which are
attributes), whereas in actual fact they are just regular comments.
file.
Previously multibyte UTF-8 chars were being recorded as byte offsets
from the start of the file, and then later compared against global byte
positions, resulting in the compiler possibly thinking it had a byte
position pointing inside a multibyte character, if there were multibyte
characters in any non-crate files. (Although, sometimes the byte offsets
line up just right to not ICE, but that was a coincidence.)
Fixes#11136.
Fixes#11178.
Makes labelled loops hygiene by performing renaming of the labels defined in e.g. `'x: loop { ... }` and then used in break and continue statements within loop body so that they act hygienically when used with macros.
Closes#12262.
Makes labelled loops hygiene by performing renaming of the labels
defined in e.g. `'x: loop { ... }` and then used in break and continue
statements within loop body so that they act hygienically when used with
macros.
Closes#12262.
These two containers are indeed collections, so their place is in
libcollections, not in libstd. There will always be a hash map as part of the
standard distribution of Rust, but by moving it out of the standard library it
makes libstd that much more portable to more platforms and environments.
This conveniently also removes the stuttering of 'std::hashmap::HashMap',
although 'collections::HashMap' is only one character shorter.
This patch gets rid of ObsoleteExternModAttributesInParens and
ObsoleteNamedExternModule since the replacement of `extern mod` with
`extern crate` avoids those cases and raises different errors. Both have
been around for at least a version which makes this a good moment to get
rid of them.
This patch adds a new keyword `crate` which is intended to replace mod
in the context of `extern mod` as part of the issue #9880. The patch
doesn't replace all `extern mod` cases since it is necessary to first
push a new snapshot 0.
The implementation could've been less invasive than this. However I
preferred to take this chance to split the `parse_item_foreign_mod`
method and pull the `extern crate` part out of there, hence the new
method `parse_item_foreign_crate`.
This resolves issue #12157. Does that do it already or is there something else that needs taking care of?
As a side note, there seems to be some documentation, in which the old existence of the do keyword is explained. The list of keywords is not up-to-date either. But these are certainly separate issues.
Resolves issue #12157. `do` is hereby reinstated as a keyword; no syntax is
associated with it though. Along the way, a unit test had to be adapted, since
it was using `do` as a method identifier.
Breaking changes:
- Any code using `do` as an identifier will no longer work.
