Fix #[inline(always)] on closures with target feature 1.1
Fixes#108655. I think this is the most obvious solution that isn't overly complicated. The comment includes more justification, but I think this is likely better than demoting the `#[inline(always)]` to `#[inline]`, since existing code is unaffected.
Support interpolated block for `try` and `async`
I'm putting this up for T-lang discussion, to decide whether or not they feel like this should be supported. This was raised in #112952, which surprised me. There doesn't seem to be a *technical* reason why we don't support this.
### Precedent:
This is supported:
```rust
macro_rules! always {
($block:block) => {
if true $block
}
}
fn main() {
always!({});
}
```
### Counterpoint:
However, for context, this is *not* supported:
```rust
macro_rules! unsafe_block {
($block:block) => {
unsafe $block
}
}
fn main() {
unsafe_block!({});
}
```
If this support for `async` and `try` with interpolated blocks is *not* desirable, then I can convert them to instead the same diagnostic as `unsafe $block` and make this situation a lot less ambiguous.
----
I'll try to write up more before T-lang triage on Tuesday. I couldn't find anything other than #69760 for why something like `unsafe $block` is not supported, and even that PR doesn't have much information.
Fixes#112952
Remove Scope::Elision from bound-vars resolution.
This scope is a remnant of HIR-based lifetime resolution.
It's only role was to ensure that object lifetime resolution falled back to `'static`. This can be done using `ObjectLifetimeDefault` scope.
Get rid of subst-relate incompleteness in new solver
We shouldn't need subst-relate if we have bidirectional-normalizes-to in the new solver.
The only potential issue may happen if we have an unconstrained projection like `<Wrapper<?0> as Trait>::Assoc == <Wrapper<T> as Trait>::Assoc` where they both normalize to something that doesn't mention any substs, which would possibly prefer `?0 = T` if we fall back to subst-relate. But I'd prefer if we remove incompleteness until we can determine some case where we need them, and the bidirectional-normalizes-to seems better to have in general.
I can update https://github.com/rust-lang/trait-system-refactor-initiative/issues/26 and https://github.com/rust-lang/trait-system-refactor-initiative/issues/25 once this lands.
r? `@lcnr`
Tweak spans for self arg, fix borrow suggestion for signature mismatch
1. Adjust a suggestion message that was annoying me
2. Fix#112503 by recording the right spans for the `self` part of the `&self` 0th argument
3. Remove the suggestion for adjusting a trait signature on type mismatch, bc that's gonna probably break all the other impls of the trait even if it fixes its one usage 😅
Reuse the MIR validator for MIR inlining
Instead of having the inliner home-cook its own validation, we just check that the substituted MIR body passes the regular validation.
The MIR validation is first split in two: control flow validation (MIR syntax and CFG invariants) and type validation (subtyping relationship in assignments and projections). Only the latter can be affected by instantiating type parameters.
Sync rustc_codegen_cranelift
This time Cranelift has been updated to 0.98. A couple of bugs have been fixed and a decent amount of x86 vendor intrinsics have been implemented.
r? `@ghost`
`@rustbot` label +A-codegen +A-cranelift +T-compiler
Multibyte character removal in String::pop and String::remove doctests
I think it would be useful to have the doctests for the `String::pop()` and `String::remove()` methods demonstrate that they work on multibyte UTF-8 sequences.
Fix size_hint for EncodeUtf16
More realistic upper and lower bounds, and handle the case where the iterator is located within a surrogate pair.
Resolves#113897
fix docs & example for `std::os::unix::prelude::FileExt::write_at`
Changelog:
* used `File::create` instead of `File::read` to get a writeable file
* explicity mentioned the bug with `pwrite64` in docs
Unfortunately, I don't think that there is really much we can do about this since the feature has already been stabilised.
We could potentially add a clippy lint warning people on Linux that using `write_at` with the `O_APPEND` flag does not exhibit the behaviour that they would have assumed.
fixes#113627
Allow limited access to `OsString` bytes
This extends #109698 to allow no-cost conversion between `Vec<u8>` and `OsString` as suggested in feedback from `os_str_bytes` crate in #111544.
Update the tracking issue for `const_cstr_from_ptr`
Tracking issue #101719 was for `const_cstr_methods`, #113219 is a new issue specific for `const_cstr_from_ptr`.
(I believe #101719 could also be closed)
```@rustbot``` label +T-libs-api +A-docs
[RFC] Support `.comment` section like GCC/Clang (`!llvm.ident`)
Both GCC and Clang write by default a `.comment` section with compiler information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
The RFC part of this PR is about which behavior should `rustc` follow:
- Always add it.
- Add it by default, i.e. have an opt-out flag (GCC, Clang).
- Have an opt-in flag.
- Never add it (current).
There is also the question of whether debug info being enabled matters for that decision, given the current behavior of WebAssembly targets.
For instance, adding it by default gets us closer to other popular compilers, but that may surprise some users with an information leak. The most conservative option is to only do so opt-in, even if debug info is enabled (some users may be stripping debug info and not expecting something else to be leaked elsewhere).
Implementation-wise, this covers both `ModuleLlvm::new()` and `ModuleLlvm::new_metadata()` cases by moving the addition to `context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in temporary outputs), so this deduplicates it like it is done for `wasm.custom_sections`. The tests also check this duplication does not take place.
Both GCC and Clang write by default a `.comment` section with compiler
information:
```txt
$ gcc -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] GCC: (GNU) 11.2.0
$ clang -c -xc /dev/null && readelf -p '.comment' null.o
String dump of section '.comment':
[ 1] clang version 14.0.1 (https://github.com/llvm/llvm-project.git c62053979489ccb002efe411c3af059addcb5d7d)
```
They also implement the `-Qn` flag to avoid doing so:
```txt
$ gcc -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
$ clang -Qn -c -xc /dev/null && readelf -p '.comment' null.o
readelf: Warning: Section '.comment' was not dumped because it does not exist!
```
So far, `rustc` only does it for WebAssembly targets and only
when debug info is enabled:
```txt
$ echo 'fn main(){}' | rustc --target=wasm32-unknown-unknown --emit=llvm-ir -Cdebuginfo=2 - && grep llvm.ident rust_out.ll
!llvm.ident = !{!27}
```
In the RFC part of this PR it was decided to always add
the information, which gets us closer to other popular compilers.
An opt-out flag like GCC and Clang may be added later on if deemed
necessary.
Implementation-wise, this covers both `ModuleLlvm::new()` and
`ModuleLlvm::new_metadata()` cases by moving the addition to
`context::create_module` and adds a few test cases.
ThinLTO also sees the `llvm.ident` named metadata duplicated (in
temporary outputs), so this deduplicates it like it is done for
`wasm.custom_sections`. The tests also check this duplication does
not take place.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
clarify MIR uninit vs LLVM undef/poison
In [this LLVM discussion](https://discourse.llvm.org/t/rfc-load-instruction-uninitialized-memory-semantics/67481) I learned that mapping our uninitialized memory in MIR to poison in LLVM would be quite problematic due to the lack of a byte type. I am not sure where to write down this insight but this seems like a reasonable start.
Rollup of 4 pull requests
Successful merges:
- #113887 (new solver: add a separate cache for coherence)
- #113910 (Add FnPtr ty to SMIR)
- #113913 (error/E0691: include alignment in error message)
- #113914 (rustc_target: drop duplicate code)
r? `@ghost`
`@rustbot` modify labels: rollup
rustc_target: drop duplicate code
Drop duplicate helper methods on `Layout`, which are already implemented on `LayoutS`. Note that `Layout` has a `Deref` implementation to `LayoutS`, so all accessors are automatically redirected.
The methods are identical and have been copied to `rustc_abi` in:
commit 390a637e29
Author: hamidreza kalbasi <hamidrezakalbasi@protonmail.com>
Date: Mon Nov 7 00:36:11 2022 +0330
move things from rustc_target::abi to rustc_abi
This commit left behind the original implementation. Drop it now.
(originally moved by ``@HKalbasi)``
