Rollup of 9 pull requests
Successful merges:
- #108726 (tidy: enforce comment blocks to have an even number of backticks)
- #108797 (Allow binary files to go through the `FileLoader`)
- #108841 (Add suggestion to diagnostic when user has array but trait wants slice. (rebased))
- #108984 (bootstrap: document tidy)
- #109013 (Give proper error message when tcx wasn't passed to decoder)
- #109017 (remove duplicated calls to sort_string)
- #109018 (Expand on the allocator comment in `rustc-main`)
- #109028 (Add eslint checks for rustdoc-js tester)
- #109034 (Commit some tests for the new solver + lazy norm)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Commit some tests for the new solver + lazy norm
Also consolidate `typeck/lazy-norm` into `traits/new-solver`, since it's not really useful to maintain a distinction, like when a test really is due to "lazy norm" or "the new solver" (usually both!)
Give proper error message when tcx wasn't passed to decoder
I hit this yesterday and found it very confusing, even though the solution to the problem is very simple.
bootstrap: document tidy
Enable documentation of tidy, as suggested in #106803. Jyn mentioned they should probably be added to `doc.rust-lang.org`, how should that be done?
Add suggestion to diagnostic when user has array but trait wants slice. (rebased)
Rebase of #91314, except for change to multipart suggestion
Resolves#90528
r? ``@compiler-errors`` since you requested the multipart suggestion
Allow binary files to go through the `FileLoader`
I'd like for `include_bytes!` to go through the `FileLoader` in an out-of-tree `rustc_driver` wrapper, and I can't find a reason it's not already done. It seems like most folks providing a custom `FileLoader` would want this too, so I added it.
I can solve my problem in other ways if there's a strong reason not to do it, but it seems simple and harmless.
tidy: enforce comment blocks to have an even number of backticks
After PR #108694, most unmatched backticks in `compiler/` comments have been eliminated. This PR adds a tidy lint to ensure no new unmatched backticks are added, and either addresses the lint in the remaining instances it found, or allows it.
Very often, backtick containing sections wrap around lines, for example:
```Rust
// This function takes a tuple `(Vec<String>,
// Box<[u8]>)` and transforms it into `Vec<u8>`.
```
The lint is implemented to work on top of blocks, counting each line with a `//` into a block, and counting if there are an odd or even number of backticks in the entire block, instead of looking at just a single line.
Avoid unnecessary hashing
I noticed some stable hashing being done in a non-incremental build. It turns out that some of this is necessary to compute the crate hash, but some of it is not. Removing the unnecessary hashing is a perf win.
r? `@cjgillot`
Simplify message paths
This makes it easier to open the messages file. Right now I have to first click on the `locales` dir to open it, and then on the `en-US.ftl` file. `Cargo.toml` and `build.rs` files are also in the top level, and I think there should not be more than one file, so a directory isn't really needed. The [chosen strategy for pontoon adoption](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/pontoon.20and.20next.20steps) is out of tree. Even if this descision is changed in the future, the `messages.ftl` approach is also compatible with non-english translations living in-tree, as long as the non-english translations don't live in the `compiler/rustc_foo/` directories but in different ones. That would also be helpful for grepability purposes.
The commit was the result of automated changes:
```
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
```
r? `@davidtwco`
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
Move dep graph methods to DepGraphData to avoid branches and `unwrap`s
This moves methods from `DepGraph` to `DepGraphData` which makes the code a bit cleaner since the dep graph is unconditionally available. It also changes `try_execute_query` to only branch on dep graph availability once, removing unnecessary branches and `unwrap`s.
This is based on https://github.com/rust-lang/rust/pull/108134 and https://github.com/rust-lang/rust/pull/108167.
Performance impact of just the last commit:
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.7354s</td><td align="right">1.7242s</td><td align="right"> -0.64%</td></tr><tr><td>🟣 <b>clap</b>:check:initial</td><td align="right">2.0813s</td><td align="right">2.0687s</td><td align="right"> -0.61%</td></tr><tr><td>🟣 <b>clap</b>:check:unchanged</td><td align="right">0.4554s</td><td align="right">0.4550s</td><td align="right"> -0.09%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2528s</td><td align="right">0.2521s</td><td align="right"> -0.27%</td></tr><tr><td>🟣 <b>hyper</b>:check:initial</td><td align="right">0.3222s</td><td align="right">0.3214s</td><td align="right"> -0.25%</td></tr><tr><td>🟣 <b>hyper</b>:check:unchanged</td><td align="right">0.1339s</td><td align="right">0.1333s</td><td align="right"> -0.38%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9484s</td><td align="right">0.9455s</td><td align="right"> -0.30%</td></tr><tr><td>🟣 <b>regex</b>:check:initial</td><td align="right">1.1805s</td><td align="right">1.1727s</td><td align="right"> -0.66%</td></tr><tr><td>🟣 <b>regex</b>:check:unchanged</td><td align="right">0.3305s</td><td align="right">0.3307s</td><td align="right"> 0.08%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.5453s</td><td align="right">1.5374s</td><td align="right"> -0.51%</td></tr><tr><td>🟣 <b>syn</b>:check:initial</td><td align="right">1.9230s</td><td align="right">1.9206s</td><td align="right"> -0.12%</td></tr><tr><td>🟣 <b>syn</b>:check:unchanged</td><td align="right">0.6340s</td><td align="right">0.6333s</td><td align="right"> -0.11%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">5.8623s</td><td align="right">5.8536s</td><td align="right"> -0.15%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:initial</td><td align="right">7.2873s</td><td align="right">7.2786s</td><td align="right"> -0.12%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:unchanged</td><td align="right">1.8378s</td><td align="right">1.8478s</td><td align="right"> 0.54%</td></tr><tr><td>Total</td><td align="right">26.5300s</td><td align="right">26.4750s</td><td align="right"> -0.21%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9976s</td><td align="right"> -0.24%</td></tr></table>
r? `@cjgillot`
Some comments may be formed like:
// This function takes a tuple `(Vec<String>,
// Box<[u8]>)` and transforms it into `Vec<u8>`.
where the "back-ticked" section wraps around.
Therefore, we can't make a single-line based
lint.
We also cannot make the lint paragraph based,
as it would otherwise complain about inline
code blocks:
/// ```
/// use super::Foo;
///
/// fn main() { Foo::new(); }
/// ```
For the future, one could introduce some checks
to treat code blocks specially, but such code
would make the check even more complicated.
Rollup of 9 pull requests
Successful merges:
- #104363 (Make `unused_allocation` lint against `Box::new` too)
- #106633 (Stabilize `nonzero_min_max`)
- #106844 (allow negative numeric literals in `concat!`)
- #108071 (Implement goal caching with the new solver)
- #108542 (Force parentheses around `match` expression in binary expression)
- #108690 (Place size limits on query keys and values)
- #108708 (Prevent overflow through Arc::downgrade)
- #108739 (Prevent the `start_bx` basic block in codegen from having two `Builder`s at the same time)
- #108806 (Querify register_tools and post-expansion early lints)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Querify register_tools and post-expansion early lints
The 2 extra queries correspond to code that happen before and after macro expansion, and don't need the resolver to exist.
Prevent the `start_bx` basic block in codegen from having two `Builder`s at the same time
Here, at the same time, there are two `start_llbb` builder, this should be unexpected.
Place size limits on query keys and values
This just prevents these from growing accidentally too large. I'm not sure if there's an easy way to also print the actual size too.
Implement goal caching with the new solver
Maybe it's wrong, idk. Opening mostly for first impressions before I go to sleep.
r? ``@lcnr,`` cc ``@cjgillot``
allow negative numeric literals in `concat!`
Fixes#106837
While *technically* negative numeric literals are implemented as unary operations, users can reasonably expect that negative literals are treated the same as positive literals.
Stabilize `nonzero_min_max`
## Overall
Stabilizes `nonzero_min_max` to allow the "infallible" construction of ordinary minimum and maximum `NonZero*` instances.
The feature is fairly straightforward and already matured for some time in stable toolchains.
```rust
let _ = NonZeroU8::MIN;
let _ = NonZeroI32::MAX;
```
## History
* On 2022-01-25, implementation was [created](https://github.com/rust-lang/rust/pull/93293).
## Considerations
* This report is fruit of the inanition observed after two unsuccessful attempts at getting feedback.
* Other constant variants discussed at https://github.com/rust-lang/rust/issues/89065#issuecomment-923238190 are orthogonal to this feature.
Fixes https://github.com/rust-lang/rust/issues/89065
Make `unused_allocation` lint against `Box::new` too
Previously it only linted against `box` syntax, which likely won't ever be stabilized, which is pretty useless. Even now I'm not sure if it's a meaningful lint, but it's at least something 🤷
This means that code like the following will be linted against:
```rust
Box::new([1, 2, 3]).len();
f(&Box::new(1)); // where f : &i32 -> ()
```
The lint works by checking if a `Box::new` (or `box`) expression has an a borrow adjustment, meaning that the code that first stores the box in a variable won't be linted against:
```rust
let boxed = Box::new([1, 2, 3]); // no lint
boxed.len();
```
Before, it said "global_allocator does nothing". Now it gives you
suggestions for what to do if you want to change the global allocator
(which is likely the main reason you'd be reading the comment).
Directly construct Inherited in typeck.
Using `InheritedBuilder` + a closure does not seem necessary any more.
+ a few opportunistic simplifications to typeck entry point.
Honor current target when checking conditional compilation values
This is fixed by simply using the currently registered target in the current session. We need to use it because of target json that are not by design included in the rustc list of targets.
Fixes https://github.com/rust-lang/rust/issues/108941
Move __thread_local_inner to sys
Move `__thread_local_inner` macro in `crate:🧵:local` to `crate::sys`. Initially, I was thinking about removing this macro completely, but I could not find a way to create the generic statics without macros, so in the end, I just moved to code around.
This probably will need a rebase once https://github.com/rust-lang/rust/pull/108917 is merged
r? ``@workingjubilee``
Add note when matching token with nonterminal
The current error message is _really_ confusing. The implementation is slightly hacky, but not that much more hacky than all this nonterminal stuff..
r? ``@petrochenkov``
Fix `vec_deque::Drain` FIXME
In my original `VecDeque` rewrite, I didn't use `VecDeque::slice_ranges` in `Drain::as_slices`, even though that's basically the exact use case for `slice_ranges`. The reason for this was that a `VecDeque` wrapped in a `Drain` actually has its length set to `drain_start`, so that there's no potential use after free if you `mem::forget` the `Drain`. I modified `slice_ranges` to accept an explicit `len` parameter instead, which it now uses to bounds check the given range. This way, `Drain::as_slices` can use `slice_ranges` internally instead of having to basically just copy paste the `slice_ranges` code. Since `slice_ranges` is just an internal helper function, this shouldn't change the user facing behavior in any way.
