Go to file

bors d4de1f230c Auto merge of #93368 - eddyb:diagbld-guarantee, r=estebank rustc_errors: let `DiagnosticBuilder::emit` return a "guarantee of emission". That is, `DiagnosticBuilder` is now generic over the return type of `.emit()`, so we'll now have: * `DiagnosticBuilder<ErrorReported>` for error (incl. fatal/bug) diagnostics * can only be created via a `const L: Level`-generic constructor, that limits allowed variants via a `where` clause, so not even `rustc_errors` can accidentally bypass this limitation * asserts `diagnostic.is_error()` on emission, just in case the construction restriction was bypassed (e.g. by replacing the whole `Diagnostic` inside `DiagnosticBuilder`) * `.emit()` returns `ErrorReported`, as a "proof" token that `.emit()` was called (though note that this isn't a real guarantee until after completing the work on #69426) * `DiagnosticBuilder<()>` for everything else (warnings, notes, etc.) * can also be obtained from other `DiagnosticBuilder`s by calling `.forget_guarantee()` This PR is a companion to other ongoing work, namely: * #69426 and it's ongoing implementation: #93222 the API changes in this PR are needed to get statically-checked "only errors produce `ErrorReported` from `.emit()`", but doesn't itself provide any really strong guarantees without those other `ErrorReported` changes * #93244 would make the choices of API changes (esp. naming) in this PR fit better overall In order to be able to let `.emit()` return anything trustable, several changes had to be made: * `Diagnostic`'s `level` field is now private to `rustc_errors`, to disallow arbitrary "downgrade"s from "some kind of error" to "warning" (or anything else that doesn't cause compilation to fail) * it's still possible to replace the whole `Diagnostic` inside the `DiagnosticBuilder`, sadly, that's harder to fix, but it's unlikely enough that we can paper over it with asserts on `.emit()` * `.cancel()` now consumes `DiagnosticBuilder`, preventing `.emit()` calls on a cancelled diagnostic * it's also now done internally, through `DiagnosticBuilder`-private state, instead of having a `Level::Cancelled` variant that can be read (or worse, written) by the user * this removes a hazard of calling `.cancel()` on an error then continuing to attach details to it, and even expect to be able to `.emit()` it * warnings were switched to only `can_emit_warnings` on emission (instead of pre-cancelling early) * `struct_dummy` was removed (as it relied on a pre-`Cancelled` `Diagnostic`) * since `.emit()` doesn't consume the `DiagnosticBuilder` <sub>(I tried and gave up, it's much more work than this PR)</sub>, we have to make `.emit()` idempotent wrt the guarantees it returns * thankfully, `err.emit(); err.emit();` can return `ErrorReported` both times, as the second `.emit()` call has no side-effects only because the first one did do the appropriate emission * `&mut Diagnostic` is now used in a lot of function signatures, which used to take `&mut DiagnosticBuilder` (in the interest of not having to make those functions generic) * the APIs were already mostly identical, allowing for low-effort porting to this new setup * only some of the suggestion methods needed some rework, to have the extra `DiagnosticBuilder` functionality on the `Diagnostic` methods themselves (that change is also present in #93259) * `.emit()`/`.cancel()` aren't available, but IMO calling them from an "error decorator/annotator" function isn't a good practice, and can lead to strange behavior (from the caller's perspective) * `.downgrade_to_delayed_bug()` was added, letting you convert any `.is_error()` diagnostic into a `delay_span_bug` one (which works because in both cases the guarantees available are the same) This PR should ideally be reviewed commit-by-commit, since there is a lot of fallout in each. r? `@estebank` cc `@Manishearth` `@nikomatsakis` `@mark-i-m`		2022-02-25 00:46:04 +00:00
.github
compiler	Auto merge of #93368 - eddyb:diagbld-guarantee, r=estebank	2022-02-25 00:46:04 +00:00
library	Rollup merge of #94212 - scottmcm:swapper, r=dtolnay	2022-02-24 21:42:14 +01:00
src	Auto merge of #93368 - eddyb:diagbld-guarantee, r=estebank	2022-02-25 00:46:04 +00:00
.editorconfig
.gitattributes
.gitignore
.gitmodules
.mailmap
Cargo.lock	Update cargo	2022-02-22 23:22:42 -08:00
Cargo.toml
CODE_OF_CONDUCT.md
config.toml.example
configure
CONTRIBUTING.md
COPYRIGHT
LICENSE-APACHE
LICENSE-MIT
README.md
RELEASES.md	Release notes for 1.59	2022-02-18 16:02:00 -05:00
rustfmt.toml
triagebot.toml
x.py

README.md

The Rust Programming Language

This is the main source code repository for Rust. It contains the compiler, standard library, and documentation.

Note: this README is for users rather than contributors. If you wish to contribute to the compiler, you should read the Getting Started section of the rustc-dev-guide instead. You can ask for help in the #new members Zulip stream.

Quick Start

Read "Installation" from The Book.

Installing from Source

The Rust build system uses a Python script called x.py to build the compiler, which manages the bootstrapping process. It lives in the root of the project.

The x.py command can be run directly on most systems in the following format:

./x.py <subcommand> [flags]

This is how the documentation and examples assume you are running x.py.

Systems such as Ubuntu 20.04 LTS do not create the necessary python command by default when Python is installed that allows x.py to be run directly. In that case you can either create a symlink for python (Ubuntu provides the python-is-python3 package for this), or run x.py using Python itself:

# Python 3
python3 x.py <subcommand> [flags]

# Python 2.7
python2.7 x.py <subcommand> [flags]

More information about x.py can be found by running it with the --help flag or reading the rustc dev guide.

Building on a Unix-like system

Make sure you have installed the dependencies:
- g++ 5.1 or later or clang++ 3.5 or later
- python 3 or 2.7
- GNU make 3.81 or later
- cmake 3.13.4 or later
- ninja
- curl
- git
- ssl which comes in libssl-dev or openssl-devel
- pkg-config if you are compiling on Linux and targeting Linux

Clone the source with git:

git clone https://github.com/rust-lang/rust.git
cd rust

Configure the build settings:

The Rust build system uses a file named config.toml in the root of the source tree to determine various configuration settings for the build. Copy the default config.toml.example to config.toml to get started.
```
cp config.toml.example config.toml
```
If you plan to use x.py install to create an installation, it is recommended that you set the prefix value in the [install] section to a directory.

Create install directory if you are not installing in default directory
Build and install:
```
./x.py build && ./x.py install
```
When complete, ./x.py install will place several programs into $PREFIX/bin: rustc, the Rust compiler, and rustdoc, the API-documentation tool. This install does not include Cargo, Rust's package manager. To build and install Cargo, you may run ./x.py install cargo or set the build.extended key in config.toml to true to build and install all tools.

Building on Windows

There are two prominent ABIs in use on Windows: the native (MSVC) ABI used by Visual Studio, and the GNU ABI used by the GCC toolchain. Which version of Rust you need depends largely on what C/C++ libraries you want to interoperate with: for interop with software produced by Visual Studio use the MSVC build of Rust; for interop with GNU software built using the MinGW/MSYS2 toolchain use the GNU build.

MinGW

MSYS2 can be used to easily build Rust on Windows:

Grab the latest MSYS2 installer and go through the installer.
Run mingw32_shell.bat or mingw64_shell.bat from wherever you installed MSYS2 (i.e. C:\msys64), depending on whether you want 32-bit or 64-bit Rust. (As of the latest version of MSYS2 you have to run msys2_shell.cmd -mingw32 or msys2_shell.cmd -mingw64 from the command line instead)

From this terminal, install the required tools:

# Update package mirrors (may be needed if you have a fresh install of MSYS2)
pacman -Sy pacman-mirrors

# Install build tools needed for Rust. If you're building a 32-bit compiler,
# then replace "x86_64" below with "i686". If you've already got git, python,
# or CMake installed and in PATH you can remove them from this list. Note
# that it is important that you do **not** use the 'python2', 'cmake' and 'ninja'
# packages from the 'msys2' subsystem. The build has historically been known
# to fail with these packages.
pacman -S git \
            make \
            diffutils \
            tar \
            mingw-w64-x86_64-python \
            mingw-w64-x86_64-cmake \
            mingw-w64-x86_64-gcc \
            mingw-w64-x86_64-ninja

Navigate to Rust's source code (or clone it), then build it:
```
./x.py build && ./x.py install
```

MSVC

MSVC builds of Rust additionally require an installation of Visual Studio 2017 (or later) so rustc can use its linker. The simplest way is to get the Visual Studio, check the “C++ build tools” and “Windows 10 SDK” workload.

(If you're installing cmake yourself, be careful that “C++ CMake tools for Windows” doesn't get included under “Individual components”.)

With these dependencies installed, you can build the compiler in a cmd.exe shell with:

python x.py build

Currently, building Rust only works with some known versions of Visual Studio. If you have a more recent version installed and the build system doesn't understand, you may need to force rustbuild to use an older version. This can be done by manually calling the appropriate vcvars file before running the bootstrap.

CALL "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvars64.bat"
python x.py build

Specifying an ABI

Each specific ABI can also be used from either environment (for example, using the GNU ABI in PowerShell) by using an explicit build triple. The available Windows build triples are:

GNU ABI (using GCC)
- i686-pc-windows-gnu
- x86_64-pc-windows-gnu
The MSVC ABI
- i686-pc-windows-msvc
- x86_64-pc-windows-msvc

The build triple can be specified by either specifying --build=<triple> when invoking x.py commands, or by copying the config.toml file (as described in Installing From Source), and modifying the build option under the [build] section.

Configure and Make

While it's not the recommended build system, this project also provides a configure script and makefile (the latter of which just invokes x.py).

./configure
make && sudo make install

When using the configure script, the generated config.mk file may override the config.toml file. To go back to the config.toml file, delete the generated config.mk file.

Building Documentation

If you’d like to build the documentation, it’s almost the same:

./x.py doc

The generated documentation will appear under doc in the build directory for the ABI used. I.e., if the ABI was x86_64-pc-windows-msvc, the directory will be build\x86_64-pc-windows-msvc\doc.

Notes

Since the Rust compiler is written in Rust, it must be built by a precompiled "snapshot" version of itself (made in an earlier stage of development). As such, source builds require a connection to the Internet, to fetch snapshots, and an OS that can execute the available snapshot binaries.

Snapshot binaries are currently built and tested on several platforms:

Platform / Architecture	x86	x86_64
Windows (7, 8, 10, ...)	✓	✓
Linux (kernel 2.6.32, glibc 2.11 or later)	✓	✓
macOS (10.7 Lion or later)	(*)	✓

(*): Apple dropped support for running 32-bit binaries starting from macOS 10.15 and iOS 11. Due to this decision from Apple, the targets are no longer useful to our users. Please read our blog post for more info.

You may find that other platforms work, but these are our officially supported build environments that are most likely to work.

Getting Help

The Rust community congregates in a few places:

Stack Overflow - Direct questions about using the language.
users.rust-lang.org - General discussion and broader questions.
/r/rust - News and general discussion.

Contributing

If you are interested in contributing to the Rust project, please take a look at the Getting Started guide in the rustc-dev-guide.

License

Rust is primarily distributed under the terms of both the MIT license and the Apache License (Version 2.0), with portions covered by various BSD-like licenses.

See LICENSE-APACHE, LICENSE-MIT, and COPYRIGHT for details.

Trademark

The Rust Foundation owns and protects the Rust and Cargo trademarks and logos (the “Rust Trademarks”).

If you want to use these names or brands, please read the media guide.

Third-party logos may be subject to third-party copyrights and trademarks. See Licenses for details.

README.md Unescape Escape