rust/library/alloc/tests/fmt.rs
bors aef11409b4 Auto merge of - workingjubilee:ieee754-fmt, r=m-ou-se
Add IEEE 754 compliant fmt/parse of -0, infinity, NaN

This pull request improves the Rust float formatting/parsing libraries to comply with IEEE 754's formatting expectations around certain special values, namely signed zero, the infinities, and NaN. It also adds IEEE 754 compliance tests that, while less stringent in certain places than many of the existing flt2dec/dec2flt capability tests, are intended to serve as the beginning of a roadmap to future compliance with the standard. Some relevant documentation is also adjusted with clarifying remarks.

This PR follows from discussion in https://github.com/rust-lang/rfcs/issues/1074, and closes .

The most controversial change here is likely to be that -0 is now printed as -0. Allow me to explain: While there appears to be community support for an opt-in toggle of printing floats as if they exist in the naively expected domain of numbers, i.e. not the extended reals (where floats live), IEEE 754-2019 is clear that a float converted to a string should be capable of being transformed into the original floating point bit-pattern when it satisfies certain conditions (namely, when it is an actual numeric value i.e. not a NaN and the original and destination float width are the same). -0 is given special attention here as a value that should have its sign preserved. In addition, the vast majority of other programming languages not only output `-0` but output `-0.0` here.

While IEEE 754 offers a broad leeway in how to handle producing what it calls a "decimal character sequence", it is clear that the operations a language provides should be capable of round tripping, and it is confusing to advertise the f32 and f64 types as binary32 and binary64 yet have the most basic way of producing a string and then reading it back into a floating point number be non-conformant with the standard. Further, existing documentation suggested that e.g. -0 would be printed with -0 regardless of the presence of the `+` fmt character, but it prints "+0" instead if given such (which was what led to the opening of ).

There are other parsing and formatting issues for floating point numbers which prevent Rust from complying with the standard, as well as other well-documented challenges on the arithmetic level, but I hope that this can be the beginning of motion towards solving those challenges.
2021-03-27 10:40:16 +00:00

324 lines
10 KiB
Rust

#![deny(warnings)]
use std::cell::RefCell;
use std::fmt::{self, Write};
#[test]
fn test_format() {
let s = fmt::format(format_args!("Hello, {}!", "world"));
assert_eq!(s, "Hello, world!");
}
struct A;
struct B;
struct C;
struct D;
impl fmt::LowerHex for A {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.write_str("aloha")
}
}
impl fmt::UpperHex for B {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.write_str("adios")
}
}
impl fmt::Display for C {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.pad_integral(true, "", "123")
}
}
impl fmt::Binary for D {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
f.write_str("aa")?;
f.write_char('☃')?;
f.write_str("bb")
}
}
macro_rules! t {
($a:expr, $b:expr) => {
assert_eq!($a, $b)
};
}
#[test]
fn test_format_macro_interface() {
// Various edge cases without formats
t!(format!(""), "");
t!(format!("hello"), "hello");
t!(format!("hello {{"), "hello {");
// default formatters should work
t!(format!("{}", 1.0f32), "1");
t!(format!("{}", 1.0f64), "1");
t!(format!("{}", "a"), "a");
t!(format!("{}", "a".to_string()), "a");
t!(format!("{}", false), "false");
t!(format!("{}", 'a'), "a");
// At least exercise all the formats
t!(format!("{}", true), "true");
t!(format!("{}", '☃'), "");
t!(format!("{}", 10), "10");
t!(format!("{}", 10_usize), "10");
t!(format!("{:?}", '☃'), "'☃'");
t!(format!("{:?}", 10), "10");
t!(format!("{:?}", 10_usize), "10");
t!(format!("{:?}", "true"), "\"true\"");
t!(format!("{:?}", "foo\nbar"), "\"foo\\nbar\"");
t!(format!("{:?}", "foo\n\"bar\"\r\n\'baz\'\t\\qux\\"), r#""foo\n\"bar\"\r\n'baz'\t\\qux\\""#);
t!(format!("{:?}", "foo\0bar\x01baz\u{7f}q\u{75}x"), r#""foo\u{0}bar\u{1}baz\u{7f}qux""#);
t!(format!("{:o}", 10_usize), "12");
t!(format!("{:x}", 10_usize), "a");
t!(format!("{:X}", 10_usize), "A");
t!(format!("{}", "foo"), "foo");
t!(format!("{}", "foo".to_string()), "foo");
if cfg!(target_pointer_width = "32") {
t!(format!("{:#p}", 0x1234 as *const isize), "0x00001234");
t!(format!("{:#p}", 0x1234 as *mut isize), "0x00001234");
} else {
t!(format!("{:#p}", 0x1234 as *const isize), "0x0000000000001234");
t!(format!("{:#p}", 0x1234 as *mut isize), "0x0000000000001234");
}
t!(format!("{:p}", 0x1234 as *const isize), "0x1234");
t!(format!("{:p}", 0x1234 as *mut isize), "0x1234");
t!(format!("{:x}", A), "aloha");
t!(format!("{:X}", B), "adios");
t!(format!("foo {} ☃☃☃☃☃☃", "bar"), "foo bar ☃☃☃☃☃☃");
t!(format!("{1} {0}", 0, 1), "1 0");
t!(format!("{foo} {bar}", foo = 0, bar = 1), "0 1");
t!(format!("{foo} {1} {bar} {0}", 0, 1, foo = 2, bar = 3), "2 1 3 0");
t!(format!("{} {0}", "a"), "a a");
t!(format!("{_foo}", _foo = 6usize), "6");
t!(format!("{foo_bar}", foo_bar = 1), "1");
t!(format!("{}", 5 + 5), "10");
t!(format!("{:#4}", C), "☃123");
t!(format!("{:b}", D), "aa☃bb");
let a: &dyn fmt::Debug = &1;
t!(format!("{:?}", a), "1");
// Formatting strings and their arguments
t!(format!("{}", "a"), "a");
t!(format!("{:4}", "a"), "a ");
t!(format!("{:4}", ""), "");
t!(format!("{:>4}", "a"), " a");
t!(format!("{:<4}", "a"), "a ");
t!(format!("{:^5}", "a"), " a ");
t!(format!("{:^5}", "aa"), " aa ");
t!(format!("{:^4}", "a"), " a ");
t!(format!("{:^4}", "aa"), " aa ");
t!(format!("{:.4}", "a"), "a");
t!(format!("{:4.4}", "a"), "a ");
t!(format!("{:4.4}", "aaaaaaaaaaaaaaaaaa"), "aaaa");
t!(format!("{:<4.4}", "aaaaaaaaaaaaaaaaaa"), "aaaa");
t!(format!("{:>4.4}", "aaaaaaaaaaaaaaaaaa"), "aaaa");
t!(format!("{:^4.4}", "aaaaaaaaaaaaaaaaaa"), "aaaa");
t!(format!("{:>10.4}", "aaaaaaaaaaaaaaaaaa"), " aaaa");
t!(format!("{:2.4}", "aaaaa"), "aaaa");
t!(format!("{:2.4}", "aaaa"), "aaaa");
t!(format!("{:2.4}", "aaa"), "aaa");
t!(format!("{:2.4}", "aa"), "aa");
t!(format!("{:2.4}", "a"), "a ");
t!(format!("{:0>2}", "a"), "0a");
t!(format!("{:.*}", 4, "aaaaaaaaaaaaaaaaaa"), "aaaa");
t!(format!("{:.1$}", "aaaaaaaaaaaaaaaaaa", 4), "aaaa");
t!(format!("{:.a$}", "aaaaaaaaaaaaaaaaaa", a = 4), "aaaa");
t!(format!("{:._a$}", "aaaaaaaaaaaaaaaaaa", _a = 4), "aaaa");
t!(format!("{:1$}", "a", 4), "a ");
t!(format!("{1:0$}", 4, "a"), "a ");
t!(format!("{:a$}", "a", a = 4), "a ");
t!(format!("{:-#}", "a"), "a");
t!(format!("{:+#}", "a"), "a");
t!(format!("{:/^10.8}", "1234567890"), "/12345678/");
// Some float stuff
t!(format!("{:}", 1.0f32), "1");
t!(format!("{:}", 1.0f64), "1");
t!(format!("{:.3}", 1.0f64), "1.000");
t!(format!("{:10.3}", 1.0f64), " 1.000");
t!(format!("{:+10.3}", 1.0f64), " +1.000");
t!(format!("{:+10.3}", -1.0f64), " -1.000");
t!(format!("{:e}", 1.2345e6f32), "1.2345e6");
t!(format!("{:e}", 1.2345e6f64), "1.2345e6");
t!(format!("{:E}", 1.2345e6f64), "1.2345E6");
t!(format!("{:.3e}", 1.2345e6f64), "1.234e6");
t!(format!("{:10.3e}", 1.2345e6f64), " 1.234e6");
t!(format!("{:+10.3e}", 1.2345e6f64), " +1.234e6");
t!(format!("{:+10.3e}", -1.2345e6f64), " -1.234e6");
// Float edge cases
t!(format!("{}", -0.0), "-0");
t!(format!("{:?}", 0.0), "0.0");
// sign aware zero padding
t!(format!("{:<3}", 1), "1 ");
t!(format!("{:>3}", 1), " 1");
t!(format!("{:^3}", 1), " 1 ");
t!(format!("{:03}", 1), "001");
t!(format!("{:<03}", 1), "001");
t!(format!("{:>03}", 1), "001");
t!(format!("{:^03}", 1), "001");
t!(format!("{:+03}", 1), "+01");
t!(format!("{:<+03}", 1), "+01");
t!(format!("{:>+03}", 1), "+01");
t!(format!("{:^+03}", 1), "+01");
t!(format!("{:#05x}", 1), "0x001");
t!(format!("{:<#05x}", 1), "0x001");
t!(format!("{:>#05x}", 1), "0x001");
t!(format!("{:^#05x}", 1), "0x001");
t!(format!("{:05}", 1.2), "001.2");
t!(format!("{:<05}", 1.2), "001.2");
t!(format!("{:>05}", 1.2), "001.2");
t!(format!("{:^05}", 1.2), "001.2");
t!(format!("{:05}", -1.2), "-01.2");
t!(format!("{:<05}", -1.2), "-01.2");
t!(format!("{:>05}", -1.2), "-01.2");
t!(format!("{:^05}", -1.2), "-01.2");
t!(format!("{:+05}", 1.2), "+01.2");
t!(format!("{:<+05}", 1.2), "+01.2");
t!(format!("{:>+05}", 1.2), "+01.2");
t!(format!("{:^+05}", 1.2), "+01.2");
// Ergonomic format_args!
t!(format!("{0:x} {0:X}", 15), "f F");
t!(format!("{0:x} {0:X} {}", 15), "f F 15");
t!(format!("{:x}{0:X}{a:x}{:X}{1:x}{a:X}", 13, 14, a = 15), "dDfEeF");
t!(format!("{a:x} {a:X}", a = 15), "f F");
// And its edge cases
t!(
format!(
"{a:.0$} {b:.0$} {0:.0$}\n{a:.c$} {b:.c$} {c:.c$}",
4,
a = "abcdefg",
b = "hijklmn",
c = 3
),
"abcd hijk 4\nabc hij 3"
);
t!(format!("{a:.*} {0} {:.*}", 4, 3, "efgh", a = "abcdef"), "abcd 4 efg");
t!(format!("{:.a$} {a} {a:#x}", "aaaaaa", a = 2), "aa 2 0x2");
// Test that pointers don't get truncated.
{
let val = usize::MAX;
let exp = format!("{:#x}", val);
t!(format!("{:p}", val as *const isize), exp);
}
// Escaping
t!(format!("{{"), "{");
t!(format!("}}"), "}");
// make sure that format! doesn't move out of local variables
let a = Box::new(3);
format!("{}", a);
format!("{}", a);
// make sure that format! doesn't cause spurious unused-unsafe warnings when
// it's inside of an outer unsafe block
unsafe {
let a: isize = ::std::mem::transmute(3_usize);
format!("{}", a);
}
// test that trailing commas are acceptable
format!("{}", "test",);
format!("{foo}", foo = "test",);
}
// Basic test to make sure that we can invoke the `write!` macro with an
// fmt::Write instance.
#[test]
fn test_write() {
let mut buf = String::new();
let _ = write!(&mut buf, "{}", 3);
{
let w = &mut buf;
let _ = write!(w, "{foo}", foo = 4);
let _ = write!(w, "{}", "hello");
let _ = writeln!(w, "{}", "line");
let _ = writeln!(w, "{foo}", foo = "bar");
let _ = w.write_char('☃');
let _ = w.write_str("str");
}
t!(buf, "34helloline\nbar\n☃str");
}
// Just make sure that the macros are defined, there's not really a lot that we
// can do with them just yet (to test the output)
#[test]
fn test_print() {
print!("hi");
print!("{:?}", vec![0u8]);
println!("hello");
println!("this is a {}", "test");
println!("{foo}", foo = "bar");
}
// Just make sure that the macros are defined, there's not really a lot that we
// can do with them just yet (to test the output)
#[test]
fn test_format_args() {
let mut buf = String::new();
{
let w = &mut buf;
let _ = write!(w, "{}", format_args!("{}", 1));
let _ = write!(w, "{}", format_args!("test"));
let _ = write!(w, "{}", format_args!("{test}", test = 3));
}
let s = buf;
t!(s, "1test3");
let s = fmt::format(format_args!("hello {}", "world"));
t!(s, "hello world");
let s = format!("{}: {}", "args were", format_args!("hello {}", "world"));
t!(s, "args were: hello world");
}
#[test]
fn test_order() {
// Make sure format!() arguments are always evaluated in a left-to-right
// ordering
fn foo() -> isize {
static mut FOO: isize = 0;
unsafe {
FOO += 1;
FOO
}
}
assert_eq!(
format!("{} {} {a} {b} {} {c}", foo(), foo(), foo(), a = foo(), b = foo(), c = foo()),
"1 2 4 5 3 6".to_string()
);
}
#[test]
fn test_once() {
// Make sure each argument are evaluated only once even though it may be
// formatted multiple times
fn foo() -> isize {
static mut FOO: isize = 0;
unsafe {
FOO += 1;
FOO
}
}
assert_eq!(format!("{0} {0} {0} {a} {a} {a}", foo(), a = foo()), "1 1 1 2 2 2".to_string());
}
#[test]
fn test_refcell() {
let refcell = RefCell::new(5);
assert_eq!(format!("{:?}", refcell), "RefCell { value: 5 }");
let borrow = refcell.borrow_mut();
assert_eq!(format!("{:?}", refcell), "RefCell { value: <borrowed> }");
drop(borrow);
assert_eq!(format!("{:?}", refcell), "RefCell { value: 5 }");
}