ff8c7a7816
Detect `NulInCStr` error earlier. By making it an `EscapeError` instead of a `LitError`. This makes it like the other errors produced when checking string literals contents, e.g. for invalid escape sequences or bare CR chars. NOTE: this means these errors are issued earlier, before expansion, which changes behaviour. It will be possible to move the check back to the later point if desired. If that happens, it's likely that all the string literal contents checks will be delayed together. One nice thing about this: the old approach had some code in `report_lit_error` to calculate the span of the nul char from a range. This code used a hardwired `+2` to account for the `c"` at the start of a C string literal, but this should have changed to a `+3` for raw C string literals to account for the `cr"`, which meant that the caret in `cr"` nul error messages was one short of where it should have been. The new approach doesn't need any of this and avoids the off-by-one error. r? ```@fee1-dead```
115 lines
5.8 KiB
Plaintext
115 lines
5.8 KiB
Plaintext
session_binary_float_literal_not_supported = binary float literal is not supported
|
|
session_branch_protection_requires_aarch64 = `-Zbranch-protection` is only supported on aarch64
|
|
|
|
session_cannot_enable_crt_static_linux = sanitizer is incompatible with statically linked libc, disable it using `-C target-feature=-crt-static`
|
|
|
|
session_cannot_mix_and_match_sanitizers = `-Zsanitizer={$first}` is incompatible with `-Zsanitizer={$second}`
|
|
|
|
session_cli_feature_diagnostic_help =
|
|
add `-Zcrate-attr="feature({$feature})"` to the command-line options to enable
|
|
|
|
session_crate_name_does_not_match = `--crate-name` and `#[crate_name]` are required to match, but `{$s}` != `{$name}`
|
|
|
|
session_crate_name_empty = crate name must not be empty
|
|
|
|
session_crate_name_invalid = crate names cannot start with a `-`, but `{$s}` has a leading hyphen
|
|
|
|
session_expr_parentheses_needed = parentheses are required to parse this as an expression
|
|
|
|
session_failed_to_create_profiler = failed to create profiler: {$err}
|
|
|
|
session_feature_diagnostic_for_issue =
|
|
see issue #{$n} <https://github.com/rust-lang/rust/issues/{$n}> for more information
|
|
|
|
session_feature_diagnostic_help =
|
|
add `#![feature({$feature})]` to the crate attributes to enable
|
|
|
|
session_feature_suggest_upgrade_compiler =
|
|
this compiler was built on {$date}; consider upgrading it if it is out of date
|
|
|
|
session_file_is_not_writeable = output file {$file} is not writeable -- check its permissions
|
|
|
|
session_file_write_fail = failed to write `{$path}` due to error `{$err}`
|
|
|
|
session_function_return_requires_x86_or_x86_64 = `-Zfunction-return` (except `keep`) is only supported on x86 and x86_64
|
|
|
|
session_function_return_thunk_extern_requires_non_large_code_model = `-Zfunction-return=thunk-extern` is only supported on non-large code models
|
|
|
|
session_hexadecimal_float_literal_not_supported = hexadecimal float literal is not supported
|
|
|
|
session_incompatible_linker_flavor = linker flavor `{$flavor}` is incompatible with the current target
|
|
.note = compatible flavors are: {$compatible_list}
|
|
|
|
session_instrumentation_not_supported = {$us} instrumentation is not supported for this target
|
|
|
|
session_int_literal_too_large = integer literal is too large
|
|
.note = value exceeds limit of `{$limit}`
|
|
|
|
session_invalid_character_in_create_name = invalid character `{$character}` in crate name: `{$crate_name}`
|
|
session_invalid_character_in_create_name_help = you can either pass `--crate-name` on the command line or add `#![crate_name="…"]` to set the crate name
|
|
|
|
session_invalid_float_literal_suffix = invalid suffix `{$suffix}` for float literal
|
|
.label = invalid suffix `{$suffix}`
|
|
.help = valid suffixes are `f32` and `f64`
|
|
|
|
session_invalid_float_literal_width = invalid width `{$width}` for float literal
|
|
.help = valid widths are 32 and 64
|
|
|
|
session_invalid_int_literal_width = invalid width `{$width}` for integer literal
|
|
.help = valid widths are 8, 16, 32, 64 and 128
|
|
|
|
session_invalid_literal_suffix = suffixes on {$kind} literals are invalid
|
|
.label = invalid suffix `{$suffix}`
|
|
|
|
session_invalid_num_literal_base_prefix = invalid base prefix for number literal
|
|
.note = base prefixes (`0xff`, `0b1010`, `0o755`) are lowercase
|
|
.suggestion = try making the prefix lowercase
|
|
|
|
session_invalid_num_literal_suffix = invalid suffix `{$suffix}` for number literal
|
|
.label = invalid suffix `{$suffix}`
|
|
.help = the suffix must be one of the numeric types (`u32`, `isize`, `f32`, etc.)
|
|
|
|
session_linker_plugin_lto_windows_not_supported = linker plugin based LTO is not supported together with `-C prefer-dynamic` when targeting Windows-like targets
|
|
|
|
session_not_circumvent_feature = `-Zunleash-the-miri-inside-of-you` may not be used to circumvent feature gates, except when testing error paths in the CTFE engine
|
|
|
|
session_not_supported = not supported
|
|
|
|
session_octal_float_literal_not_supported = octal float literal is not supported
|
|
|
|
session_optimization_fuel_exhausted = optimization-fuel-exhausted: {$msg}
|
|
|
|
session_profile_sample_use_file_does_not_exist = file `{$path}` passed to `-C profile-sample-use` does not exist.
|
|
|
|
session_profile_use_file_does_not_exist = file `{$path}` passed to `-C profile-use` does not exist.
|
|
|
|
session_sanitizer_cfi_canonical_jump_tables_requires_cfi = `-Zsanitizer-cfi-canonical-jump-tables` requires `-Zsanitizer=cfi`
|
|
|
|
session_sanitizer_cfi_generalize_pointers_requires_cfi = `-Zsanitizer-cfi-generalize-pointers` requires `-Zsanitizer=cfi` or `-Zsanitizer=kcfi`
|
|
|
|
session_sanitizer_cfi_normalize_integers_requires_cfi = `-Zsanitizer-cfi-normalize-integers` requires `-Zsanitizer=cfi` or `-Zsanitizer=kcfi`
|
|
|
|
session_sanitizer_cfi_requires_lto = `-Zsanitizer=cfi` requires `-Clto` or `-Clinker-plugin-lto`
|
|
|
|
session_sanitizer_cfi_requires_single_codegen_unit = `-Zsanitizer=cfi` with `-Clto` requires `-Ccodegen-units=1`
|
|
|
|
session_sanitizer_not_supported = {$us} sanitizer is not supported for this target
|
|
|
|
session_sanitizers_not_supported = {$us} sanitizers are not supported for this target
|
|
|
|
session_skipping_const_checks = skipping const checks
|
|
session_split_debuginfo_unstable_platform = `-Csplit-debuginfo={$debuginfo}` is unstable on this platform
|
|
|
|
session_split_lto_unit_requires_lto = `-Zsplit-lto-unit` requires `-Clto`, `-Clto=thin`, or `-Clinker-plugin-lto`
|
|
|
|
session_target_requires_unwind_tables = target requires unwind tables, they cannot be disabled with `-C force-unwind-tables=no`
|
|
|
|
session_target_stack_protector_not_supported = `-Z stack-protector={$stack_protector}` is not supported for target {$target_triple} and will be ignored
|
|
|
|
session_unleashed_feature_help_named = skipping check for `{$gate}` feature
|
|
session_unleashed_feature_help_unnamed = skipping check that does not even have a feature gate
|
|
|
|
session_unstable_virtual_function_elimination = `-Zvirtual-function-elimination` requires `-Clto`
|
|
|
|
session_unsupported_dwarf_version = requested DWARF version {$dwarf_version} is greater than 5
|