use io::WriterUtil;
use dvec::DVec;

/*
 * This pretty-printer is a direct reimplementation of Philip Karlton's
 * Mesa pretty-printer, as described in appendix A of
 *
 *     STAN-CS-79-770: "Pretty Printing", by Derek C. Oppen.
 *     Stanford Department of Computer Science, 1979.
 *
 * The algorithm's aim is to break a stream into as few lines as possible
 * while respecting the indentation-consistency requirements of the enclosing
 * block, and avoiding breaking at silly places on block boundaries, for
 * example, between "x" and ")" in "x)".
 *
 * I am implementing this algorithm because it comes with 20 pages of
 * documentation explaining its theory, and because it addresses the set of
 * concerns I've seen other pretty-printers fall down on. Weirdly. Even though
 * it's 32 years old and not written in Haskell. What can I say?
 *
 * Despite some redundancies and quirks in the way it's implemented in that
 * paper, I've opted to keep the implementation here as similar as I can,
 * changing only what was blatantly wrong, a typo, or sufficiently
 * non-idiomatic rust that it really stuck out.
 *
 * In particular you'll see a certain amount of churn related to INTEGER vs.
 * CARDINAL in the Mesa implementation. Mesa apparently interconverts the two
 * somewhat readily? In any case, I've used uint for indices-in-buffers and
 * ints for character-sizes-and-indentation-offsets. This respects the need
 * for ints to "go negative" while carrying a pending-calculation balance, and
 * helps differentiate all the numbers flying around internally (slightly).
 *
 * I also inverted the indentation arithmetic used in the print stack, since
 * the Mesa implementation (somewhat randomly) stores the offset on the print
 * stack in terms of margin-col rather than col itself. I store col.
 *
 * I also implemented a small change in the STRING token, in that I store an
 * explicit length for the string. For most tokens this is just the length of
 * the accompanying string. But it's necessary to permit it to differ, for
 * encoding things that are supposed to "go on their own line" -- certain
 * classes of comment and blank-line -- where relying on adjacent
 * hardbreak-like BREAK tokens with long blankness indication doesn't actually
 * work. To see why, consider when there is a "thing that should be on its own
 * line" between two long blocks, say functions. If you put a hardbreak after
 * each function (or before each) and the breaking algorithm decides to break
 * there anyways (because the functions themselves are long) you wind up with
 * extra blank lines. If you don't put hardbreaks you can wind up with the
 * "thing which should be on its own line" not getting its own line in the
 * rare case of "really small functions" or such. This re-occurs with comments
 * and explicit blank lines. So in those cases we use a string with a payload
 * we want isolated to a line and an explicit length that's huge, surrounded
 * by two zero-length breaks. The algorithm will try its best to fit it on a
 * line (which it can't) and so naturally place the content on its own line to
 * avoid combining it with other lines and making matters even worse.
 */
enum breaks { consistent, inconsistent, }

#[cfg(stage0)]
impl breaks : cmp::Eq {
    pure fn eq(&&other: breaks) -> bool {
        match (self, other) {
            (consistent, consistent) => true,
            (inconsistent, inconsistent) => true,
            (consistent, _) => false,
            (inconsistent, _) => false,
        }
    }
    pure fn ne(&&other: breaks) -> bool { !self.eq(other) }
}
#[cfg(stage1)]
#[cfg(stage2)]
impl breaks : cmp::Eq {
    pure fn eq(other: &breaks) -> bool {
        match (self, (*other)) {
            (consistent, consistent) => true,
            (inconsistent, inconsistent) => true,
            (consistent, _) => false,
            (inconsistent, _) => false,
        }
    }
    pure fn ne(other: &breaks) -> bool { !self.eq(other) }
}

type break_t = {offset: int, blank_space: int};

type begin_t = {offset: int, breaks: breaks};

enum token { STRING(@~str, int), BREAK(break_t), BEGIN(begin_t), END, EOF, }

impl token {
    fn is_eof() -> bool {
        match self { EOF => true, _ => false }
    }
    fn is_hardbreak_tok() -> bool {
        match self {
            BREAK({offset: 0, blank_space: bs }) if bs == size_infinity =>
                true,
            _ =>
                false
        }
    }
}

fn tok_str(++t: token) -> ~str {
    match t {
      STRING(s, len) => return fmt!("STR(%s,%d)", *s, len),
      BREAK(_) => return ~"BREAK",
      BEGIN(_) => return ~"BEGIN",
      END => return ~"END",
      EOF => return ~"EOF"
    }
}

fn buf_str(toks: ~[mut token], szs: ~[mut int], left: uint, right: uint,
           lim: uint) -> ~str {
    let n = vec::len(toks);
    assert (n == vec::len(szs));
    let mut i = left;
    let mut L = lim;
    let mut s = ~"[";
    while i != right && L != 0u {
        L -= 1u;
        if i != left { s += ~", "; }
        s += fmt!("%d=%s", szs[i], tok_str(toks[i]));
        i += 1u;
        i %= n;
    }
    s += ~"]";
    return s;
}

enum print_stack_break { fits, broken(breaks), }

type print_stack_elt = {offset: int, pbreak: print_stack_break};

const size_infinity: int = 0xffff;

fn mk_printer(out: io::Writer, linewidth: uint) -> printer {
    // Yes 3, it makes the ring buffers big enough to never
    // fall behind.
    let n: uint = 3 * linewidth;
    debug!("mk_printer %u", linewidth);
    let token: ~[mut token] = vec::to_mut(vec::from_elem(n, EOF));
    let size: ~[mut int] = vec::to_mut(vec::from_elem(n, 0));
    let scan_stack: ~[mut uint] = vec::to_mut(vec::from_elem(n, 0u));
    printer_(@{out: out,
               buf_len: n,
               mut margin: linewidth as int,
               mut space: linewidth as int,
               mut left: 0,
               mut right: 0,
               token: move token,
               size: move size,
               mut left_total: 0,
               mut right_total: 0,
               mut scan_stack: move scan_stack,
               mut scan_stack_empty: true,
               mut top: 0,
               mut bottom: 0,
               print_stack: DVec(),
               mut pending_indentation: 0,
               mut token_tree_last_was_ident: false})
}


/*
 * In case you do not have the paper, here is an explanation of what's going
 * on.
 *
 * There is a stream of input tokens flowing through this printer.
 *
 * The printer buffers up to 3N tokens inside itself, where N is linewidth.
 * Yes, linewidth is chars and tokens are multi-char, but in the worst
 * case every token worth buffering is 1 char long, so it's ok.
 *
 * Tokens are STRING, BREAK, and BEGIN/END to delimit blocks.
 *
 * BEGIN tokens can carry an offset, saying "how far to indent when you break
 * inside here", as well as a flag indicating "consistent" or "inconsistent"
 * breaking. Consistent breaking means that after the first break, no attempt
 * will be made to flow subsequent breaks together onto lines. Inconsistent
 * is the opposite. Inconsistent breaking example would be, say:
 *
 *  foo(hello, there, good, friends)
 *
 * breaking inconsistently to become
 *
 *  foo(hello, there
 *      good, friends);
 *
 * whereas a consistent breaking would yield:
 *
 *  foo(hello,
 *      there
 *      good,
 *      friends);
 *
 * That is, in the consistent-break blocks we value vertical alignment
 * more than the ability to cram stuff onto a line. But in all cases if it
 * can make a block a one-liner, it'll do so.
 *
 * Carrying on with high-level logic:
 *
 * The buffered tokens go through a ring-buffer, 'tokens'. The 'left' and
 * 'right' indices denote the active portion of the ring buffer as well as
 * describing hypothetical points-in-the-infinite-stream at most 3N tokens
 * apart (i.e. "not wrapped to ring-buffer boundaries"). The paper will switch
 * between using 'left' and 'right' terms to denote the wrapepd-to-ring-buffer
 * and point-in-infinite-stream senses freely.
 *
 * There is a parallel ring buffer, 'size', that holds the calculated size of
 * each token. Why calculated? Because for BEGIN/END pairs, the "size"
 * includes everything betwen the pair. That is, the "size" of BEGIN is
 * actually the sum of the sizes of everything between BEGIN and the paired
 * END that follows. Since that is arbitrarily far in the future, 'size' is
 * being rewritten regularly while the printer runs; in fact most of the
 * machinery is here to work out 'size' entries on the fly (and give up when
 * they're so obviously over-long that "infinity" is a good enough
 * approximation for purposes of line breaking).
 *
 * The "input side" of the printer is managed as an abstract process called
 * SCAN, which uses 'scan_stack', 'scan_stack_empty', 'top' and 'bottom', to
 * manage calculating 'size'. SCAN is, in other words, the process of
 * calculating 'size' entries.
 *
 * The "output side" of the printer is managed by an abstract process called
 * PRINT, which uses 'print_stack', 'margin' and 'space' to figure out what to
 * do with each token/size pair it consumes as it goes. It's trying to consume
 * the entire buffered window, but can't output anything until the size is >=
 * 0 (sizes are set to negative while they're pending calculation).
 *
 * So SCAN takeks input and buffers tokens and pending calculations, while
 * PRINT gobbles up completed calculations and tokens from the buffer. The
 * theory is that the two can never get more than 3N tokens apart, because
 * once there's "obviously" too much data to fit on a line, in a size
 * calculation, SCAN will write "infinity" to the size and let PRINT consume
 * it.
 *
 * In this implementation (following the paper, again) the SCAN process is
 * the method called 'pretty_print', and the 'PRINT' process is the method
 * called 'print'.
 */
type printer_ = {
    out: io::Writer,
    buf_len: uint,
    mut margin: int, // width of lines we're constrained to
    mut space: int, // number of spaces left on line
    mut left: uint, // index of left side of input stream
    mut right: uint, // index of right side of input stream
    token: ~[mut token], // ring-buffr stream goes through
    size: ~[mut int], // ring-buffer of calculated sizes
    mut left_total: int, // running size of stream "...left"
    mut right_total: int, // running size of stream "...right"
    // pseudo-stack, really a ring too. Holds the
    // primary-ring-buffers index of the BEGIN that started the
    // current block, possibly with the most recent BREAK after that
    // BEGIN (if there is any) on top of it. Stuff is flushed off the
    // bottom as it becomes irrelevant due to the primary ring-buffer
    // advancing.
    mut scan_stack: ~[mut uint],
    mut scan_stack_empty: bool, // top==bottom disambiguator
    mut top: uint, // index of top of scan_stack
    mut bottom: uint, // index of bottom of scan_stack
    // stack of blocks-in-progress being flushed by print
    print_stack: DVec<print_stack_elt>,
    // buffered indentation to avoid writing trailing whitespace
    mut pending_indentation: int,
    mut token_tree_last_was_ident: bool
};

enum printer {
    printer_(@printer_)
}

impl printer {
    fn last_token() -> token { self.token[self.right] }
    // be very careful with this!
    fn replace_last_token(t: token) { self.token[self.right] = t; }
    fn pretty_print(t: token) {
        debug!("pp ~[%u,%u]", self.left, self.right);
        match t {
          EOF => {
            if !self.scan_stack_empty {
                self.check_stack(0);
                self.advance_left(self.token[self.left],
                                  self.size[self.left]);
            }
            self.indent(0);
          }
          BEGIN(b) => {
            if self.scan_stack_empty {
                self.left_total = 1;
                self.right_total = 1;
                self.left = 0u;
                self.right = 0u;
            } else { self.advance_right(); }
            debug!("pp BEGIN(%d)/buffer ~[%u,%u]",
                   b.offset, self.left, self.right);
            self.token[self.right] = t;
            self.size[self.right] = -self.right_total;
            self.scan_push(self.right);
          }
          END => {
            if self.scan_stack_empty {
                debug!("pp END/print ~[%u,%u]", self.left, self.right);
                self.print(t, 0);
            } else {
                debug!("pp END/buffer ~[%u,%u]", self.left, self.right);
                self.advance_right();
                self.token[self.right] = t;
                self.size[self.right] = -1;
                self.scan_push(self.right);
            }
          }
          BREAK(b) => {
            if self.scan_stack_empty {
                self.left_total = 1;
                self.right_total = 1;
                self.left = 0u;
                self.right = 0u;
            } else { self.advance_right(); }
            debug!("pp BREAK(%d)/buffer ~[%u,%u]",
                   b.offset, self.left, self.right);
            self.check_stack(0);
            self.scan_push(self.right);
            self.token[self.right] = t;
            self.size[self.right] = -self.right_total;
            self.right_total += b.blank_space;
          }
          STRING(s, len) => {
            if self.scan_stack_empty {
                debug!("pp STRING('%s')/print ~[%u,%u]",
                       *s, self.left, self.right);
                self.print(t, len);
            } else {
                debug!("pp STRING('%s')/buffer ~[%u,%u]",
                       *s, self.left, self.right);
                self.advance_right();
                self.token[self.right] = t;
                self.size[self.right] = len;
                self.right_total += len;
                self.check_stream();
            }
          }
        }
    }
    fn check_stream() {
        debug!("check_stream ~[%u, %u] with left_total=%d, right_total=%d",
               self.left, self.right, self.left_total, self.right_total);
        if self.right_total - self.left_total > self.space {
            debug!("scan window is %d, longer than space on line (%d)",
                   self.right_total - self.left_total, self.space);
            if !self.scan_stack_empty {
                if self.left == self.scan_stack[self.bottom] {
                    debug!("setting %u to infinity and popping", self.left);
                    self.size[self.scan_pop_bottom()] = size_infinity;
                }
            }
            self.advance_left(self.token[self.left], self.size[self.left]);
            if self.left != self.right { self.check_stream(); }
        }
    }
    fn scan_push(x: uint) {
        debug!("scan_push %u", x);
        if self.scan_stack_empty {
            self.scan_stack_empty = false;
        } else {
            self.top += 1u;
            self.top %= self.buf_len;
            assert (self.top != self.bottom);
        }
        self.scan_stack[self.top] = x;
    }
    fn scan_pop() -> uint {
        assert (!self.scan_stack_empty);
        let x = self.scan_stack[self.top];
        if self.top == self.bottom {
            self.scan_stack_empty = true;
        } else { self.top += self.buf_len - 1u; self.top %= self.buf_len; }
        return x;
    }
    fn scan_top() -> uint {
        assert (!self.scan_stack_empty);
        return self.scan_stack[self.top];
    }
    fn scan_pop_bottom() -> uint {
        assert (!self.scan_stack_empty);
        let x = self.scan_stack[self.bottom];
        if self.top == self.bottom {
            self.scan_stack_empty = true;
        } else { self.bottom += 1u; self.bottom %= self.buf_len; }
        return x;
    }
    fn advance_right() {
        self.right += 1u;
        self.right %= self.buf_len;
        assert (self.right != self.left);
    }
    fn advance_left(++x: token, L: int) {
        debug!("advnce_left ~[%u,%u], sizeof(%u)=%d", self.left, self.right,
               self.left, L);
        if L >= 0 {
            self.print(x, L);
            match x {
              BREAK(b) => self.left_total += b.blank_space,
              STRING(_, len) => { assert (len == L); self.left_total += len; }
              _ => ()
            }
            if self.left != self.right {
                self.left += 1u;
                self.left %= self.buf_len;
                self.advance_left(self.token[self.left],
                                  self.size[self.left]);
            }
        }
    }
    fn check_stack(k: int) {
        if !self.scan_stack_empty {
            let x = self.scan_top();
            match copy self.token[x] {
              BEGIN(_) => {
                if k > 0 {
                    self.size[self.scan_pop()] = self.size[x] +
                        self.right_total;
                    self.check_stack(k - 1);
                }
              }
              END => {
                // paper says + not =, but that makes no sense.
                self.size[self.scan_pop()] = 1;
                self.check_stack(k + 1);
              }
              _ => {
                self.size[self.scan_pop()] = self.size[x] + self.right_total;
                if k > 0 { self.check_stack(k); }
              }
            }
        }
    }
    fn print_newline(amount: int) {
        debug!("NEWLINE %d", amount);
        self.out.write_str(~"\n");
        self.pending_indentation = 0;
        self.indent(amount);
    }
    fn indent(amount: int) {
        debug!("INDENT %d", amount);
        self.pending_indentation += amount;
    }
    fn get_top() -> print_stack_elt {
        let n = self.print_stack.len();
        if n != 0u {
            self.print_stack[n - 1u]
        } else {
            {offset: 0, pbreak: broken(inconsistent)}
        }
    }
    fn print_str(s: ~str) {
        while self.pending_indentation > 0 {
            self.out.write_str(~" ");
            self.pending_indentation -= 1;
        }
        self.out.write_str(s);
    }
    fn print(x: token, L: int) {
        debug!("print %s %d (remaining line space=%d)", tok_str(x), L,
               self.space);
        log(debug, buf_str(self.token, self.size, self.left, self.right, 6u));
        match x {
          BEGIN(b) => {
            if L > self.space {
                let col = self.margin - self.space + b.offset;
                debug!("print BEGIN -> push broken block at col %d", col);
                self.print_stack.push({offset: col,
                                       pbreak: broken(b.breaks)});
            } else {
                debug!("print BEGIN -> push fitting block");
                self.print_stack.push({offset: 0,
                                       pbreak: fits});
            }
          }
          END => {
            debug!("print END -> pop END");
            assert (self.print_stack.len() != 0u);
            self.print_stack.pop();
          }
          BREAK(b) => {
            let top = self.get_top();
            match top.pbreak {
              fits => {
                debug!("print BREAK(%d) in fitting block", b.blank_space);
                self.space -= b.blank_space;
                self.indent(b.blank_space);
              }
              broken(consistent) => {
                debug!("print BREAK(%d+%d) in consistent block",
                       top.offset, b.offset);
                self.print_newline(top.offset + b.offset);
                self.space = self.margin - (top.offset + b.offset);
              }
              broken(inconsistent) => {
                if L > self.space {
                    debug!("print BREAK(%d+%d) w/ newline in inconsistent",
                           top.offset, b.offset);
                    self.print_newline(top.offset + b.offset);
                    self.space = self.margin - (top.offset + b.offset);
                } else {
                    debug!("print BREAK(%d) w/o newline in inconsistent",
                           b.blank_space);
                    self.indent(b.blank_space);
                    self.space -= b.blank_space;
                }
              }
            }
          }
          STRING(s, len) => {
            debug!("print STRING(%s)", *s);
            assert (L == len);
            // assert L <= space;
            self.space -= len;
            self.print_str(*s);
          }
          EOF => {
            // EOF should never get here.
            fail;
          }
        }
    }
}

// Convenience functions to talk to the printer.
fn box(p: printer, indent: uint, b: breaks) {
    p.pretty_print(BEGIN({offset: indent as int, breaks: b}));
}

fn ibox(p: printer, indent: uint) { box(p, indent, inconsistent); }

fn cbox(p: printer, indent: uint) { box(p, indent, consistent); }

fn break_offset(p: printer, n: uint, off: int) {
    p.pretty_print(BREAK({offset: off, blank_space: n as int}));
}

fn end(p: printer) { p.pretty_print(END); }

fn eof(p: printer) { p.pretty_print(EOF); }

fn word(p: printer, wrd: ~str) {
    p.pretty_print(STRING(@wrd, str::len(wrd) as int));
}

fn huge_word(p: printer, wrd: ~str) {
    p.pretty_print(STRING(@wrd, size_infinity));
}

fn zero_word(p: printer, wrd: ~str) { p.pretty_print(STRING(@wrd, 0)); }

fn spaces(p: printer, n: uint) { break_offset(p, n, 0); }

fn zerobreak(p: printer) { spaces(p, 0u); }

fn space(p: printer) { spaces(p, 1u); }

fn hardbreak(p: printer) { spaces(p, size_infinity as uint); }

fn hardbreak_tok_offset(off: int) -> token {
    return BREAK({offset: off, blank_space: size_infinity});
}

fn hardbreak_tok() -> token { return hardbreak_tok_offset(0); }


//
// Local Variables:
// mode: rust
// fill-column: 78;
// indent-tabs-mode: nil
// c-basic-offset: 4
// buffer-file-coding-system: utf-8-unix
// End:
//