This commit removes the `dep_graph` field from the `Session` type according to
issue #44390. Most of the fallout here was relatively straightforward and the
`prepare_session_directory` function was rejiggered a bit to reuse the results
in the later-called `load_dep_graph` function.
Closes#44390
This feature allows targets to opt in to full support of the crt-static
feature. Currently, crt-static is allowed on all targets, even those
that really can't or really shouldn't support it. This works because it
is very loose in the specification of its effects. Changing the behavior
of crt-static to be more strict in how it chooses libraries and links
executables would likely cause compilation to fail on these platforms.
To avoid breaking existing uses of crt-static, whitelist targets that
support the new, stricter behavior. For all other targets, this changes
crt-static from being "mostly a no-op" to "explicitly a no-op".
In preparation for incremental compilation this commit refactors the lint
handling infrastructure in the compiler to be more "eager" and overall more
incremental-friendly. Many passes of the compiler can emit lints at various
points but before this commit all lints were buffered in a table to be emitted
at the very end of compilation. This commit changes these lints to be emitted
immediately during compilation using pre-calculated lint level-related data
structures.
Linting today is split into two phases, one set of "early" lints run on the
`syntax::ast` and a "late" set of lints run on the HIR. This commit moves the
"early" lints to running as late as possible in compilation, just before HIR
lowering. This notably means that we're catching resolve-related lints just
before HIR lowering. The early linting remains a pass very similar to how it was
before, maintaining context of the current lint level as it walks the tree.
Post-HIR, however, linting is structured as a method on the `TyCtxt` which
transitively executes a query to calculate lint levels. Each request to lint on
a `TyCtxt` will query the entire crate's 'lint level data structure' and then go
from there about whether the lint should be emitted or not.
The query depends on the entire HIR crate but should be very quick to calculate
(just a quick walk of the HIR) and the red-green system should notice that the
lint level data structure rarely changes, and should hopefully preserve
incrementality.
Overall this resulted in a pretty big change to the test suite now that lints
are emitted much earlier in compilation (on-demand vs only at the end). This in
turn necessitated the addition of many `#![allow(warnings)]` directives
throughout the compile-fail test suite and a number of updates to the UI test
suite.
This PR is an implementation of [RFC 1974] which specifies a new method of
defining a global allocator for a program. This obsoletes the old
`#![allocator]` attribute and also removes support for it.
[RFC 1974]: https://github.com/rust-lang/rfcs/pull/197
The new `#[global_allocator]` attribute solves many issues encountered with the
`#![allocator]` attribute such as composition and restrictions on the crate
graph itself. The compiler now has much more control over the ABI of the
allocator and how it's implemented, allowing much more freedom in terms of how
this feature is implemented.
cc #27389
Prior to this PR, when we aborted because a "critical pass" failed, we
displayed the number of errors from that critical pass. While that's the
number of errors that caused compilation to abort in *that place*,
that's not what people really want to know. Instead, always report the
total number of errors, and don't bother to track the number of errors
from the last pass that failed.
This changes the compiler driver API to handle errors more smoothly,
and therefore is a compiler-api-[breaking-change].
Fixes#42793.
This commit integrates the `jobserver` crate into the compiler. The crate was
previously integrated in to Cargo as part of rust-lang/cargo#4110. The purpose
here is to two-fold:
* Primarily the compiler can cooperate with Cargo on parallelism. When you run
`cargo build -j4` then this'll make sure that the entire build process between
Cargo/rustc won't use more than 4 cores, whereas today you'd get 4 rustc
instances which may all try to spawn lots of threads.
* Secondarily rustc/Cargo can now integrate with a foreign GNU `make` jobserver.
This means that if you call cargo/rustc from `make` or another
jobserver-compatible implementation it'll use foreign parallelism settings
instead of creating new ones locally.
As the number of parallel codegen instances in the compiler continues to grow
over time with the advent of incremental compilation it's expected that this'll
become more of a problem, so this is intended to nip concurrent concerns in the
bud by having all the tools to cooperate!
Note that while rustc has support for itself creating a jobserver it's far more
likely that rustc will always use the jobserver configured by Cargo. Cargo today
will now set a jobserver unconditionally for rustc to use.
Consequently, session creation can no longer initialize LLVM.
The few places that use the compiler without going through
rustc_driver/CompilerCalls thus need to be careful to manually
initialize LLVM (via rustc_trans!) immediately after session
creation.
This means librustc is not rebuilt when LLVM changes.
A number of things were using `crate_hash` that really ought to be using
`crate_disambiguator` (e.g., to create the plugin symbol names). They
have been updated.
It is important to remove `LinkMeta` from `SharedCrateContext` since it
contains a hash of the entire crate, and hence it will change
whenever **anything** changes (which would then require
rebuilding **everything**).
This patch adds a `-Z linker-flavor` flag to rustc which can be used to invoke
the linker using a different interface.
For example, by default rustc assumes that all the Linux targets will be linked
using GCC. This makes it impossible to use LLD as a linker using just `-C
linker=ld.lld` because that will invoke LLD with invalid command line
arguments. (e.g. rustc will pass -Wl,--gc-sections to LLD but LLD doesn't
understand that; --gc-sections would be the right argument)
With this patch one can pass `-Z linker-flavor=ld` to rustc to invoke the linker
using a LD-like interface. This way, `rustc -C linker=ld.lld -Z
linker-flavor=ld` will invoke LLD with the right arguments.
`-Z linker-flavor` accepts 4 different arguments: `em` (emcc), `ld`,
`gcc`, `msvc` (link.exe). `em`, `gnu` and `msvc` cover all the existing linker
interfaces. `ld` is a new flavor for interfacing GNU's ld and LLD.
This patch also changes target specifications. `linker-flavor` is now a
mandatory field that specifies the *default* linker flavor that the target will
use. This change also makes the linker interface *explicit*; before, it used to
be derived from other fields like linker-is-gnu, is-like-msvc,
is-like-emscripten, etc.
Another change to target specifications is that the fields `pre-link-args`,
`post-link-args` and `late-link-args` now expect a map from flavor to linker
arguments.
``` diff
- "pre-link-args": ["-Wl,--as-needed", "-Wl,-z,-noexecstack"],
+ "pre-link-args": {
+ "gcc": ["-Wl,--as-needed", "-Wl,-z,-noexecstack"],
+ "ld": ["--as-needed", "-z,-noexecstack"],
+ },
```
[breaking-change] for users of custom targets specifications
In addition to defining and handling the new option, we also add a
method on librustc::Session for determining the necessity of overflow
checks. This method provides a single point to sort out the three (!)
different ways for turning on overflow checks: -C debug-assertions, -C
overflow-checks, and -Z force-overflow-checks.
Fixes#33134.
Biggest change: Revised print-type-sizes output to include breakdown
of layout.
Includes info about field sizes (and alignment + padding when padding
is injected; the injected padding is derived from the offsets computed
by layout module).
Output format is illustrated in commit that has the ui tests.
Note: there exists (at least) one case of variant w/o name: empty
enums. Namely, empty enums use anonymous univariant repr. So for such
cases, print the number of the variant instead of the name.
----
Also, eddyb suggested of reading from `layout_cache` post-trans.
(For casual readers: the compiler source often uses the word "cache"
for tables that are in fact not periodically purged, and thus are
useful as the basis for data like this.)
Some types that were previously not printed are now included in the
output. (See e.g. the tests `print_type_sizes/generics.rs` and
`print_type_sizes/variants.rs`)
----
Other review feedback:
switch to an exhaustive match when filtering in just structural types.
switch to hashset for layout info and move sort into print method.
----
Driveby change: Factored session::code_stats into its own module
----
incorporate njn feedback re output formatting.
Group unused import warnings per import list
Given a file
``` rust
use std::collections::{BinaryHeap, BTreeMap, BTreeSet};
fn main() {}
```
Show a single warning, instead of three for each unused import:
``` nocode
warning: unused imports, #[warn(unused_imports)] on by default
--> file2.rs:1:24
|
1 | use std::collections::{BinaryHeap, BTreeMap, BTreeSet};
| ^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^
```
Include support for lints pointing at `MultilineSpan`s, instead of just
`Span`s.
Fixes#16132.
Given a file
```rust
use std::collections::{BinaryHeap, BTreeMap, BTreeSet};
fn main() {}
```
Show a single warning, instead of three for each unused import:
```nocode
warning: unused imports, #[warn(unused_imports)] on by default
--> foo.rs:1:24
|
1 | use std::collections::{BinaryHeap, BTreeMap, BTreeSet};
| ^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^
```
Include support for lints pointing at `MultilineSpan`s, instead of just
`Span`s.
Most of the Rust community agrees that the vec! macro is clearer when
called using square brackets [] instead of regular brackets (). Most of
these ocurrences are from before macros allowed using different types of
brackets.
There is one left unchanged in a pretty-print test, as the pretty
printer still wants it to have regular brackets.
Some lint-level attributes (like `bad-style`, or, more dramatically,
`warnings`) can affect more than one lint; it seems fairer to point out
the attribute once for each distinct lint affected. Also, a UI test is
added. This remains in the matter of #24690.
Jonathan D. Turner pointed out that we don't want to dedup in JSON
mode. Since the compile-test runner uses JSON output, we regrettably
need to revert the edits to existing tests; one imagines that testing
for one-time diagnosticity for humans will have to be added as a UI
test.
This remains in the matter of #24690.
We introduce a new `one_time_diagnostics` field on
`rustc::session::Session` to hold a hashset of diagnostic messages we've
set once but don't want to see again (as uniquified by span and message
text), "lint level defined here" being the motivating example dealt with
here.
This is in the matter of #24690.
add a panic-strategy field to the target specification
Now a target can define its panic strategy in its specification. If a
user doesn't specify a panic strategy via the command line, i.e. '-C
panic', then the compiler will use the panic strategy defined by the
target specification.
Custom targets can pick their panic strategy via the "panic-strategy"
field of their target specification JSON file. If omitted in the
specification, the strategy defaults to "unwind".
closes#36647
---
I checked that compiling an executable for a custom target with "panic-strategy" set to "abort" doesn't need the "eh_personality" lang item and also that standard crates compiled for that custom target didn't contained undefined symbols to _Unwind_Resume. But this needs an actual unit test, any suggestion on how to test this?
Most of the noise in the diff is due to moving `PanicStrategy` from the `rustc` to the `rustc_back` crate.
r? @alexcrichton
cc @phil-opp
