travis: Move sccache to the us-west-1 region
Most of the other rust-lang buckets are in us-west-1 and I think the original
bucket was just accidentally created in the us-east-1 region. Let's consolidate
by moving it to the same location as the rest of our buckets.
Moving buckets from us-east-1 to us-west-1 because us-west-1 is where
rust-central-station itself runs and in general is where we have all our other
buckets.
Our OSX builders are routinely and significantly over hour 2 hour "soft limit"
for testing PRs. I *think* that a big portion of this time comes from the fact
that LLVM and debug assertions are enabled. In an effort to speed up these
builders and reduce cycle time this commit disables LLVM assertions on OSX for
all builders.
My thinking is that we'll let this bake for a bit after merged to see what the
effect is on timing on Travis. If it doesn't actually help much we can turn them
back on, and if it doesn't help enough we can disable Rust debug assertions as
well.
Most of the other rust-lang buckets are in us-west-1 and I think the original
bucket was just accidentally created in the us-east-1 region. Let's consolidate
by moving it to the same location as the rest of our buckets.
Fix sanitizer tests on buggy kernels
Travis recently pushed an update to the Linux environments, namely the kernels
that we're running on. This in turn caused some of the sanitizer tests we run to
fail. We also apparently weren't the first to hit these failures! Detailed in
google/sanitizers#837 these tests were failing due to a specific commit in the
kernel which has since been backed out, but for now work around the buggy kernel
that's deployed on Travis and eventually we should be able to remove these
flags.
Travis recently pushed an update to the Linux environments, namely the kernels
that we're running on. This in turn caused some of the sanitizer tests we run to
fail. We also apparently weren't the first to hit these failures! Detailed in
google/sanitizers#837 these tests were failing due to a specific commit in the
kernel which has since been backed out, but for now work around the buggy kernel
that's deployed on Travis and eventually we should be able to remove these
flags.
Reorder the job matrix to take advantage of the order how Travis CI starts
them in rust-lang/rust. Plus other refactoring of `.travis.yml`.
1. Move the `$ALLOW_PR` image to the top, so users' PRs will start testing
immediately. Previously the `$ALLOW_PR` image starts 6 minutes after the
build was scheduled.
2. Move the slow macOS images near the top, so they share more time with
the rest of the faster Linux builds, which should shorten total test
time (actually not much, about 7 minutes at most if this change does
work).
3. Merged the `install` section of both Linux and macOS to make the `env:`
section a bit shorter, and enable change 4 below.
4. Do not download or install anything if `$SKIP_BUILD == true`, which
further reduces chance of spurious failure in the PR-CI stage (avoid the
red cross appearing even if CI passed).
Use the `-f` flag to indicate that, for example, a 500 response code is to be
considered a failure, triggering the normal retry logic. Also ignore errors
where we check the date from google.com, as a failure there shouldn't fail the
build.
Add a travis builder for wasm32-unknown-emscripten
This commits add an entry to travis matrix that will execute wasm32-unknown-emscripten tests suites.
- Emscripten for asmjs was updated to sdk-1.37.13-64bit
- The tests are run with node 8.0.0 (it can execute wasm)
- A wrapper script is used to run each test from the directory where it is (workaround for https://github.com/kripken/emscripten/issues/4542)
- Some tests are ignore, see #42629 and #42630
Build instruction profiler runtime as part of compiler-rt
r? @alexcrichton
This is #38608 with some fixes.
Still missing:
- [x] testing with profiler enabled on some builders (on which ones? Should I add the option to some of the already existing configurations, or create a new configuration?);
- [x] enabling distribution (on which builders?);
- [x] documentation.
There is no `minimal` language. Due to travis-ci/travis-ci#4895, it will
fallback to `ruby`, which certainly isn't what we want. `generic` is an
undocumented (travis-ci/docs-travis-ci-com#910) language that serves the
desired purpose.
* Bring back colors on Travis, which was disabled since #39036.
Append --color=always to cargo when running in CI environment.
* Removed `set -x` in the shell scripts. The `retry` function already
prints which command it is running, add `-x` just add noise to the
output.
* Support travis_fold/travis_time. Matching pairs of these allow Travis CI
to collapse the output in between. This greatly cut down the unnecessary
"successful" output one need to scroll through before finding the failed
statement.
Generate XZ-compressed tarballs
Integrate the new `rust-installer` and extend manifests with keys for xz-compressed tarballs.
One of the steps required for https://github.com/rust-lang/rust/issues/21724
Now that the final bug fixes have been merged into sccache we can start
leveraging sccache on the MSVC builders on AppVeyor instead of relying on the
ad-hoc caching strategy of trigger files and whatnot.
ASan and TSan are supported on macOS, and this commit enables their
support.
The sanitizers are always built as *.dylib on Apple platforms, so they
cannot be statically linked into the corresponding `rustc_?san.rlib`. The
dylibs are directly copied to `lib/rustlib/x86_64-apple-darwin/lib/`
instead.
Note, although Xcode also ships with their own copies of ASan/TSan dylibs,
we cannot use them due to version mismatch.
There is a caveat: the sanitizer libraries are linked as @rpath, so the
user needs to additionally pass `-C rpath`:
rustc -Z sanitizer=address -C rpath file.rs
^~~~~~~~
Otherwise there will be a runtime error:
dyld: Library not loaded: @rpath/libclang_rt.asan_osx_dynamic.dylib
Referenced from: /path/to/executable
Reason: image not found
Abort trap: 6
The next commit includes a temporary change in compiler to force the linker
to emit a usable @rpath.
I've tracked down what I believe is the last spurious sccache failure on #40240
to behavior in mio (carllerche/mio#583), and this commit updates the binaries to
a version which has that fix incorporated.
Previously we would use one builder on Travis to produce two sets of host
compilers for two different targets. Unfortunately though we've recently
increased how much we're building for each target so this is starting to take
unnecessarily long (#40804). This commit splits the dist builders in two by
ensuring that we only dist one target on each builder, which should take a much
shorter amount of time. This should also unblock other work such as landing the
RLS (#40584).
travis: Compile OSX releases with Xcode 7
Unfortunately what we're using right now, Xcode 8.2, cannot compile LLVM for OSX
10.7. We've done this historically and Gecko would like to maintain this
compabitiliby. This commit moves our release builders for OSX to using Xcode 7
which can compile LLVM for 10.7.
The builders running tests continue to use Xcode 8.2, however, because the LLDB
version with Xcode 7, 350, is blacklisted in running our LLDB tests. To continue
running LLDB tests we'll stick with Xcode 8.2.
Unfortunately what we're using right now, Xcode 8.2, cannot compile LLVM for OSX
10.7. We've done this historically and Gecko would like to maintain this
compabitiliby. This commit moves our release builders for OSX to using Xcode 7
which can compile LLVM for 10.7.
The builders running tests continue to use Xcode 8.2, however, because the LLDB
version with Xcode 7, 350, is blacklisted in running our LLDB tests. To continue
running LLDB tests we'll stick with Xcode 8.2.
Attempt to cache git modules
Partial resolution of #40772, appveyor remains to be done once travis looks like it's working ok.
The approach in this PR is based on the `--reference` flag to `git-clone`/`git-submodule --update` and is a compromise based on the current limitations of the tools we're using.
The ideal would be:
1. have a cached pristine copy of rust-lang/rust master in `$HOME/rustsrc` with all submodules initialised
2. clone the PR branch with `git clone --recurse-submodules --reference $HOME/rustsrc git@github.com:rust-lang/rust.git`
This would (in the nonexistent ideal world) use the pristine copy as an object cache for the top level repo and all submodules, transferring over the network only the changes on the branch. Unfortunately, a) there is no way to manually control the initial clone with travis and b) even if there was, cloned submodules don't use the submodules of the reference as an object cache. So the steps we end up with are:
1. have a cached pristine copy of rust-lang/rust master in `$HOME/rustsrc` with all submodules initialised
2. have a cloned PR branch
3. extract the path of each submodule, and explicitly `git submodule update --init --reference $HOME/rustsrc/$module $module` (i.e. point directly to the location of the pristine submodule repo) for each one
I've also taken some care to make this forward compatible, both for adding and removing submodules.
r? @alexcrichton
travis: See if OSX generates crash dumps
I know for a fact we've had sccache segfault on various platforms and we've also
historically had a lot of problems with the linker on OSX. Let's just poke
around in the crash log directory to see if anything exists. If in the future we
see a build we think segfaulted *and* there's contents here then we can add some
bits that actually print out the logs.
There's a suspicion that the OOM killer is killing sccache (maybe) so this adds
some logging to test out that assumption to see if anything dies and is logged
by `dmesg`
I know for a fact we've had sccache segfault on various platforms and we've also
historically had a lot of problems with the linker on OSX. Let's just poke
around in the crash log directory to see if anything exists. If in the future we
see a build we think segfaulted *and* there's contents here then we can add some
bits that actually print out the logs.
When debugging why builds are taking so long it's often useful to get the
timestamp of all log messages as we're not always timing every tiny step of the
build. I wrote a [utility] for prepending a relative timestamp from the start of
a process which is now downloaded to the builders and is what we wrap the entire
build invocation in.
[utility]: https://github.com/alexcrichton/stamp-rsCloses#40577
This commit updates Cargo with rust-lang/cargo#3820 which includes a fix for
rust-lang/cargo#3819. At the same time this also slightly tweaks how rustbuild
builds cargo to ensure that all the build information (including git info and
such) makes its way into the binary.
Closesrust-lang/cargo#3820
travis: Remove compiling OpenSSL through homebrew
I don't believe that we need this any more now that `cargo-vendor` isn't
installed to create a source tarball (that only happens on Linux)
travis: Attempt to debug sccache failures
I can't find anything that'd cause unexpected EOF in the source, so let's try
taking a look at the error logs on failures.
This is a last-ditch attempt to help our pain with dealing with #38878 on the
bots. A new environment variable is added to the compiler,
`RUSTC_RETRY_LINKER_ON_SEGFAULT`, which will instruct the compiler to
automatically retry the final linker invocation if it looks like the linker
segfaulted (up to 2 extra times).
Unfortunately there have been no successful attempts to debug #38878. The only
information seems to be that the linker (e.g. `ld` on OSX) is segfaulting
somewhere in some thread pool implementation. This appears to be spurious as
failed PRs will later merge.
The hope is that this helps the queue keep moving without clogging and delaying
PRs due to #38878.
This change introduces a Dockerfile and script which builds a complete
Fuchsia toolchain which can be used to build Rust distribution for
Fuchsia. We only support cross-compiling at the moment, hence only
setting the target.
Travis only gives us 30GB disk space and we don't currently have an option to
increase that. Each musl target generates "hello world" binaries of about 3.5MB
in size, and we're testing two targets in the same image. We have around 3k
run-pass tests and 2 musl targets which works out to around 20GB. That's
dangerously close to the limit and is causing PRs to bounce.
This PR splits up the builder in two, one for x86_64 musl and the other for
i686. Hopefully that'll keep us under the disk limit.
Closes#40359
PRs can't land againt beta right now because the android bot is filling up on
disk space. I don't really know what's going on but the android bot is the
longest one to run anyway so it'll benefit from being split up regardless.
Now that mozilla/sccache#43 is fixed the caching works for MinGW on Windows. We
still can't use it for MSVC just yet, but I'll try to revive that branch at some
point.
This commit attempts to move more network operations to being retryable through
various operations. For example git submodule updates, downloading snapshots,
etc, are now all in retryable steps.
Hopefully this commit can cut down on the number of network failures we've been
seeing!
Currently CI builds can fail spuriously during the LLVM build (#39003). I
believe this is due to sccache, and I believe that in turn was due to the fact
that the sccache server used to just be a raw mio server. Historically raw mio
servers are quite complicated to get right, but this is why we built Tokio! The
sccache server has been migrated to Tokio which I suspect would fix any latent
issues.
I have no confirmation of this (never been able to reproduce the deadlock
locally), but my hunch is that updating sccache to the master branch will fix
the timeouts during the LLVM build.
The binaries previously came from Gecko's infrastructure, but I've built new
ones by hand for Win/Mac/Linux and uploaded them to our CI bucket.
travis: Add builders without assertions
This commit adds three new builders, one OSX, one Linux, and one MSVC, which
will produce "nightlies" with LLVM assertions disabled. Currently all nightly
releases have LLVM assertions enabled to catch bugs before they reach the
beta/stable channels. The beta/stable channels, however, do not have LLVM
assertions enabled.
Unfortunately though projects like Servo are stuck on nightlies for the near
future at least and are also suffering very long compile times. The purpose of
this commit is to provide artifacts to these projects which are not distributed
through normal channels (e.g. rustup) but are provided for developers to use
locally if need be.
Logistically these builds will all be uploaded to `rustc-builds-alt` instead of
the `rustc-builds` folder of the `rust-lang-ci` bucket. These builds will stay
there forever (until cleaned out if necessary) and there are no plans to
integrate this with rustup and/or the official release process.
This commit adds three new builders, one OSX, one Linux, and one MSVC, which
will produce "nightlies" with LLVM assertions disabled. Currently all nightly
releases have LLVM assertions enabled to catch bugs before they reach the
beta/stable channels. The beta/stable channels, however, do not have LLVM
assertions enabled.
Unfortunately though projects like Servo are stuck on nightlies for the near
future at least and are also suffering very long compile times. The purpose of
this commit is to provide artifacts to these projects which are not distributed
through normal channels (e.g. rustup) but are provided for developers to use
locally if need be.
Logistically these builds will all be uploaded to `rustc-builds-alt` instead of
the `rustc-builds` folder of the `rust-lang-ci` bucket. These builds will stay
there forever (until cleaned out if necessary) and there are no plans to
integrate this with rustup and/or the official release process.
Delete the makefile build system
This PR deletes the makefile build system in favor of the rustbuild build system. The beta has now been branched so 1.16 will continue to be buildable from the makefiles, but going forward 1.17 will only be buildable with rustbuild.
Rustbuild has been the default build system [since 1.15.0](https://github.com/rust-lang/rust/pull/37817) and the makefiles were [proposed for deletion](https://internals.rust-lang.org/t/proposal-for-promoting-rustbuild-to-official-status/4368) at this time back in November of last year.
And now with the deletion of these makefiles we can start getting those sweet sweet improvements of using crates.io crates in the compiler!
Add support for test suites emulated in QEMU
This commit adds support to the build system to execute test suites that cannot
run natively but can instead run inside of a QEMU emulator. A proof-of-concept
builder was added for the `arm-unknown-linux-gnueabihf` target to show off how
this might work.
In general the architecture is to have a server running inside of the emulator
which a local client connects to. The protocol between the server/client
supports compiling tests on the host and running them on the target inside the
emulator.
Closes#33114
travis: Gate on some minimal support for incremental compilation.
This commit adds a travis job that
1. builds a stage2 compiler in incremental mode (but with empty incremental compilation cache), and
2. builds and runs the run-pass test suite also in incremental mode.
Building incrementally with an empty cache makes sure that the compiler doesn't crash in dependency tracking during bootstrapping. Executing the incrementally built test suite gives some measure of confidence that we generate valid code.
Note, however, that the above does not give strong guarantees about the validity of incremental compilation, it just provides a basis for being able to rely on from-scratch incr. comp. builds as reference values in further tests (which then do actual incremental compilation).
r? @alexcrichton
This commit adds support to the build system to execute test suites that cannot
run natively but can instead run inside of a QEMU emulator. A proof-of-concept
builder was added for the `arm-unknown-linux-gnueabihf` target to show off how
this might work.
In general the architecture is to have a server running inside of the emulator
which a local client connects to. The protocol between the server/client
supports compiling tests on the host and running them on the target inside the
emulator.
Closes#33114
travis: Upload all artifacts in build/dist
Previously we only uploaded tarballs, but this modifies Travis/AppVeyor to
upload everything. We shouldn't have anything else in there to worry about and
otherwise we need to be sure to pick up pkg/msi/exe installers.
I've seen these take up quite a bit of log space and I have the sneaking
suspicion that they're just making our test suite take longer (sometimes timing
out on 32-bit OSX now). In any case the backtraces haven't proven too useful,
unfortunately.
Previously we only uploaded tarballs, but this modifies Travis/AppVeyor to
upload everything. We shouldn't have anything else in there to worry about and
otherwise we need to be sure to pick up pkg/msi/exe installers.
This commit adds a new flag to the configure script,
`--enable-extended`, which is intended for specifying a desire to
compile the full suite of Rust tools such as Cargo, the RLS, etc. This
is also an indication that the build system should create combined
installers such as the pkg/exe/msi artifacts.
Currently the `--enable-extended` flag just indicates that combined
installers should be built, and Cargo is itself not compiled just yet
but rather only downloaded from its location. The intention here is to
quickly get to feature parity with the current release process and then
we can start improving it afterwards.
All new files in this PR inside `src/etc/installer` are copied from the
rust-packaging repository.
travis: Stop uploading sha256 files
We'll generate these later in the build process and otherwise they could just
cause spurious failures with files overwriting one another.
cc #38531
travis: Expand the `cross` linux image
This expands the `cross` travis matrix entry with a few more targets that our
nightlies are building:
* x86_64-rumprun-netbsd
* arm-unknown-linux-musleabi
* arm-unknown-linux-musleabihf
* armv7-unknown-linux-musleabihf
* mips-unknown-linux-musl
* mipsel-unknown-linux-musl
This commit doesn't compile custom toolchains like our current cross-image does,
but instead compiles musl manually and then compiles libunwind manually (like
x86_64) for use for the ARM targets and just uses openwrt toolchains for the
mips targets.
cc #38531
This commit updates the compilers for many of the artifacts that we're producing
on Travis. These compilers are all compiled by crosstool-ng as they're currently
done for the images in which we're building all our cross compiled compilers.
The purpose of this commit is that when we ship binaries the artifacts won't
require a newer glibc, but rather be as compatible as possible with Linux
distributions by working with a very old version of glibc.
This commit always allocates a new matrix entry for the i686/x86_64 builder.
This builder is dedicated to just producing artifacts and eventually we'll
expand it to building other tools like Cargo and the RLS. The other builders
testing i686 and x86_64 won't use these historical toolchains.
This commit adds a travis job that builds a stage2 compiler in
incremental mode (but with empty incremental compilation cache).
Building incrementally with an empty cache makes sure that the
compiler doesn't crash in dependency tracking during bootstrapping.
This expands the `cross` travis matrix entry with a few more targets that our
nightlies are building:
* x86_64-rumprun-netbsd
* arm-unknown-linux-musleabi
* arm-unknown-linux-musleabihf
* armv7-unknown-linux-musleabihf
* mips-unknown-linux-musl
* mipsel-unknown-linux-musl
This commit doesn't compile custom toolchains like our current cross-image does,
but instead compiles musl manually and then compiles libunwind manually (like
x86_64) for use for the ARM targets and just uses openwrt toolchains for the
mips targets.
This commit expands the existing x86_64-musl entry in the Travis matrix to also
build/test i586-unknown-linux-gnu and i686-unknown-linux-musl.
cc #38531Closes#39053
travis: Expand dist builder coverage
This commit adds six new travis matrix entires for doing cross-compiled
distribution builds of the compiler. The support added in #38731 allows us to
quickly compile a complete suite of distribution artifacts for cross-compiled
platforms, and currently each matrix entry (when fully cached) clocks in around
an hour to finish. Note that a full test run typically takes about two hours
right now.
With further optimizations coming down the pike in #39026 this commit also
starts doubling up cross-compiled distribution builders on each matrix entry. We
initially planned to do one build per entry, but it's looking like we may be
able to get by with more than one in each entry. Depending on how long these
builds take we may even be able to up it to three, but we'll start with two
first.
This commit then completes the suite of cross-compiled compilers that we're
going to compile, adding it for a whole litany of platforms detailed in the
changes to the docker files here. The existing `cross` image is also trimmed
down quite a bit to avoid duplicate work, and we'll eventually provision it for
far more cross compilation as well.
Note that the gcc toolchains installed to compile most of these compilers are
inappropriate for actualy distribution. The glibc they pull in is much newer
than we'd like, so before we turn nightlies off we'll need to tweak these docker
files to custom build toolchains like the current `linux-cross` docker image
does.
