Flatten diagnostic slug modules
This makes it easier to grep for the slugs in the code.
See https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Localization.20infra.20interferes.20with.20grepping.20for.20error for more discussion about it.
This was mostly done with a few regexes and a bunch of manual work. This also exposes a pretty annoying inconsistency for the extra labels. Some of the extra labels are defined as additional properties in the fluent message (which makes them not prefixed with the crate name) and some of them are new fluent messages themselves (which makes them prefixed with the crate name). I don't know whether we want to clean this up at some point but it's useful to know.
r? `@davidtwco`
Change `unknown_lint` applicability to `MaybeIncorrect`
This small PR changes the applicability of `unknown_lint` to `MaybeIncorrect`, because the suggested lint might not be the correct one.
Here is one example where the current applicability causes a problem. Clippy has a set of internal lints guarded by a feature called `internal`. If the feature is not enabled, then the internal lints are "unknown." In that case, running `cargo clippy --fix ...` on `clippy_utils` causes lines such as the followig
26c96e3416/src/tools/clippy/clippy_utils/src/paths.rs (L51-L52)
to be changed to
```rust
#[expect(clippy::invalid_regex)] // internal lints do not know about all external crates
pub const FUTURES_IO_ASYNCREADEXT: [&str; 3] = ["futures_util", "io", "AsyncReadExt"];
```
which is not correct.
Introduce `subst_iter` and `subst_iter_copied` on `EarlyBinder`
Makes working with bounds lists a bit easier, which I seem to do a lot.
Specifically, means that we don't need to do `.transpose_iter().map(|(pred, _)| *pred)` every time we want to iterate through an `EarlyBinder<&'tcx [(Predicate, Span)]>` (and even then, still have to call `subst` later), which was a very awkward idiom imo.
Rust's niche handling allows for wrapping valid ranges with end < start;
for instance, a valid range with start=43 and end=41 means a niche of
42. Most places in the compiler handle this correctly, but
ty_find_init_error assumed that `lo > 0` means the type cannot contain a
zero.
Fix it to handle wrapping ranges.
Add a test to cover this case.
Slightly tweak comments wrt `lint_overflowing_range_endpoint`
From the review: https://github.com/rust-lang/rust/pull/101986#discussion_r975610611
It _seemed_ that the lint was not emitted when the `if` check failed, but _actually_ this happens already in a special case and the lint is emitted outside of this function, if this function doesn't. I've cleared up the code/comments a bit, so it's more obvious :)
r? ```@estebank```
translation: doc comments with derives, subdiagnostic-less enum variants, more derive use
- Adds support for `doc` attributes in the diagnostic derives so that documentation comments don't result in the derive failing.
- Adds support for enum variants in the subdiagnostic derive to not actually correspond to an addition to a diagnostic.
- Made use of the derive in more places in the `rustc_ast_lowering`, `rustc_ast_passes`, `rustc_lint`, `rustc_session`, `rustc_infer` - taking advantage of recent additions like eager subdiagnostics, multispan suggestions, etc.
cc #100717
`AddToDiagnostic::add_to_diagnostic_with` is similar to the previous
`AddToDiagnostic::add_to_diagnostic` but takes a function that can be
used by the caller to modify diagnostic messages originating from the
subdiagnostic (such as performing translation eagerly).
`add_to_diagnostic` now just calls `add_to_diagnostic_with` with an
empty closure.
Signed-off-by: David Wood <david.wood@huawei.com>
I refactored the code:
- Removed handling of methods, as it felt entirely unnecessary
- Removed clippy utils (obviously...)
- Used some shiny compiler features
(let-else is very handy for lints 👀)
- I also renamed the lint to `for_loop_over_fallibles` (note: no `s`).
I'm not sure what's the naming convention here, so maybe I'm wrong.
Remove `-Ztime`
Because it has a lot of overlap with `-Ztime-passes` but is generally less useful. Plus some related cleanups.
Best reviewed one commit at a time.
r? `@davidtwco`
The compiler currently has `-Ztime` and `-Ztime-passes`. I've used
`-Ztime-passes` for years but only recently learned about `-Ztime`.
What's the difference? Let's look at the `-Zhelp` output:
```
-Z time=val -- measure time of rustc processes (default: no)
-Z time-passes=val -- measure time of each rustc pass (default: no)
```
The `-Ztime-passes` description is clear, but the `-Ztime` one is less so.
Sounds like it measures the time for the entire process?
No. The real difference is that `-Ztime-passes` prints out info about passes,
and `-Ztime` does the same, but only for a subset of those passes. More
specifically, there is a distinction in the profiling code between a "verbose
generic activity" and an "extra verbose generic activity". `-Ztime-passes`
prints both kinds, while `-Ztime` only prints the first one. (It took me
a close reading of the source code to determine this difference.)
In practice this distinction has low value. Perhaps in the past the "extra
verbose" output was more voluminous, but now that we only print stats for a
pass if it exceeds 5ms or alters the RSS, `-Ztime-passes` is less spammy. Also,
a lot of the "extra verbose" cases are for individual lint passes, and you need
to also use `-Zno-interleave-lints` to see those anyway.
Therefore, this commit removes `-Ztime` and the associated machinery. One thing
to note is that the existing "extra verbose" activities all have an extra
string argument, so the commit adds the ability to accept an extra argument to
the "verbose" activities.
Lint against nested opaque types that don't satisfy associated type bounds
See the test failures for examples of places where this lint would fire.
r? `@oli-obk`
Move lint level source explanation to the bottom
So, uhhhhh
r? `@estebank`
## User-facing change
"note: `#[warn(...)]` on by default" and such are moved to the bottom of the diagnostic:
```diff
- = note: `#[warn(unsupported_calling_conventions)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #87678 <https://github.com/rust-lang/rust/issues/87678>
+ = note: `#[warn(unsupported_calling_conventions)]` on by default
```
Why warning is enabled is the least important thing, so it shouldn't be the first note the user reads, IMO.
## Developer-facing change
`struct_span_lint` and similar methods have a different signature.
Before: `..., impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>)`
After: `..., impl Into<DiagnosticMessage>, impl for<'a, 'b> FnOnce(&'b mut DiagnosticBuilder<'a, ()>) -> &'b mut DiagnosticBuilder<'a, ()>`
The reason for this is that `struct_span_lint` needs to edit the diagnostic _after_ `decorate` closure is called. This also makes lint code a little bit nicer in my opinion.
Another option is to use `impl for<'a> FnOnce(LintDiagnosticBuilder<'a, ()>) -> DiagnosticBuilder<'a, ()>` altough I don't _really_ see reasons to do `let lint = lint.build(message)` everywhere.
## Subtle problem
By moving the message outside of the closure (that may not be called if the lint is disabled) `format!(...)` is executed earlier, possibly formatting `Ty` which may call a query that trims paths that crashes the compiler if there were no warnings...
I don't think it's that big of a deal, considering that we move from `format!(...)` to `fluent` (which is lazy by-default) anyway, however this required adding a workaround which is unfortunate.
## P.S.
I'm sorry, I do not how to make this PR smaller/easier to review. Changes to the lint API affect SO MUCH 😢
`Res::SelfTy` currently has two `Option`s. When the second one is `Some`
the first one is never consulted. So we can split it into two variants,
`Res::SelfTyParam` and `Res::SelfTyAlias`, reducing the size of `Res`
from 24 bytes to 12. This then shrinks `hir::Path` and
`hir::PathSegment`, which are the HIR types that take up the most space.
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Compute lint levels by definition
Lint levels are currently computed once for the whole crate. Any code that wants to emit a lint depends on this single `lint_levels(())` query. This query contains the `Span` for each attribute that participates in the lint level tree, so any code that wants to emit a lint basically depends on the spans in all files in the crate.
Contrary to hard errors, we do not clear the incremental session on lints, so this implicit world dependency pessimizes incremental reuse. (And is furthermore invisible for allowed lints.)
This PR completes https://github.com/rust-lang/rust/pull/99634 (thanks for the initial work `@fee1-dead)` and includes it in the dependency graph.
The design is based on 2 queries:
1. `lint_levels_on(HirId) -> FxHashMap<LintId, LevelAndSource>` which accesses the attributes at the given `HirId` and processes them into lint levels. The `TyCtxt` is responsible for probing the HIR tree to find the user-visible level.
2. `lint_expectations(())` which lists all the `#[expect]` attributes in the crate.
This PR also introduces the ability to reconstruct a `HirId` from a `DepNode` by encoding the local part of the `DefPathHash` and the `ItemLocalId` in the two `u64` of the fingerprint. This allows for the dep-graph to directly recompute `lint_levels_on` directly, without having to force the calling query.
Closes https://github.com/rust-lang/rust/issues/95094.
Supersedes https://github.com/rust-lang/rust/pull/99634.
Initial implementation of dyn*
This PR adds extremely basic and incomplete support for [dyn*](https://smallcultfollowing.com/babysteps//blog/2022/03/29/dyn-can-we-make-dyn-sized/). The goal is to get something in tree behind a flag to make collaboration easier, and also to make sure the implementation so far is not unreasonable. This PR does quite a few things:
* Introduce `dyn_star` feature flag
* Adds parsing for `dyn* Trait` types
* Defines `dyn* Trait` as a sized type
* Adds support for explicit casts, like `42usize as dyn* Debug`
* Including const evaluation of such casts
* Adds codegen for drop glue so things are cleaned up properly when a `dyn* Trait` object goes out of scope
* Adds codegen for method calls, at least for methods that take `&self`
Quite a bit is still missing, but this gives us a starting point. Note that this is never intended to become stable surface syntax for Rust, but rather `dyn*` is planned to be used as an implementation detail for async functions in dyn traits.
Joint work with `@nikomatsakis` and `@compiler-errors.`
r? `@bjorn3`
Avoid `Iterator::last`
Adapters like `Filter` and `Map` use the default implementation of `Iterator::last` which is not short-circuiting (and so does `core::str::Split`). The predicate function will be run for every single item of the underlying iterator. I hope that removing those calls to `last` results in slight performance improvements.
