This updates all places where match branches check on StatementKind or UseContext.
This doesn't properly implement them, but adds TODOs where they are, and also adds some best
guesses to what they should be in some cases.
I'm still not totally sure if this is the right way to implement the memcpy, but that portion
compiles correctly now. Now to fix the compile errors everywhere else :).
Change x64 size checks to not apply to x32.
Rust contains various size checks conditional on target_arch = "x86_64", but these checks were never intended to apply to x86_64-unknown-linux-gnux32. Add target_pointer_width = "64" to the conditions.
or-patterns: disallow in `let` bindings
~~Blocked on https://github.com/rust-lang/rust/pull/81869~~
Disallows top-level or-patterns before type ascription. We want to reserve this syntactic space for possible future generalized type ascription.
r? ``@petrochenkov``
This switches Rust's WASI target to use crt1-command.o instead of
crt1.o, which enables support for new-style commands. By default,
new-style commands work the same way as old-style commands, so nothing
immediately changes here, but this will be needed by later changes to
enable support for typed arguments.
See here for more information on new-style commands:
- https://github.com/WebAssembly/wasi-libc/pull/203
- https://reviews.llvm.org/D81689
diagnostics: Be clear about "crate root" and `::foo` paths in resolve diagnostics
Various changes to make sure the diagnostics are clear about the differences in `::foo` paths across editions:
- `::foo` will say "crate root" in 2015 and "list of imported crates" in 2018
- `crate::` will never reference imported crates in 2018
Fixes https://github.com/rust-lang/rust/issues/82876
Refactor confirm_builtin_call, remove partial if
Pass callee expr to `confirm_builtin_call`. This removes a partial
pattern match in `confirm_builtin_call` and the `panic` in the `else`
branch. The diff is large because of indentation changes caused by
removing the if-let.
Disable destination propagation on all mir-opt-levels
The new `// compile-flags: -Zunsound-mir-opts` are inserted without an extra newline to avoid introducing a large mir-opt diff.
Implement built-in attribute macro `#[cfg_eval]` + some refactoring
This PR implements a built-in attribute macro `#[cfg_eval]` as it was suggested in https://github.com/rust-lang/rust/pull/79078 to avoid `#[derive()]` without arguments being abused as a way to configure input for other attributes.
The macro is used for eagerly expanding all `#[cfg]` and `#[cfg_attr]` attributes in its input ("fully configuring" the input).
The effect is identical to effect of `#[derive(Foo, Bar)]` which also fully configures its input before passing it to macros `Foo` and `Bar`, but unlike `#[derive]` `#[cfg_eval]` can be applied to any syntax nodes supporting macro attributes, not only certain items.
`cfg_eval` was the first name suggested in https://github.com/rust-lang/rust/pull/79078, but other alternatives are also possible, e.g. `cfg_expand`.
```rust
#[cfg_eval]
#[my_attr] // Receives `struct S {}` as input, the field is configured away by `#[cfg_eval]`
struct S {
#[cfg(FALSE)]
field: u8,
}
```
Tracking issue: https://github.com/rust-lang/rust/issues/82679
expand: Refactor module loading
This is an accompanying PR to https://github.com/rust-lang/rust/pull/82399, but they can be landed independently.
See individual commits for more details.
Anyone should be able to review this equally well because all people actually familiar with this code left the project.
bypass auto_da_alloc for metadata files
This saves about 0.7% when rerunning the UI test suite. I.e. when the metadata files exist and will be overwritten. No improvements expected for a clean build. So it might show up in incr-patched perf results.
```
regular rename:
Benchmark #1: touch src/tools/compiletest/src/main.rs ; RUSTC_WRAPPER="" schedtool -B -e ./x.py test src/test/ui
Time (mean ± σ): 47.305 s ± 0.170 s [User: 1631.540 s, System: 412.648 s]
Range (min … max): 47.125 s … 47.856 s 20 runs
non-durable rename:
Benchmark #1: touch src/tools/compiletest/src/main.rs ; RUSTC_WRAPPER="" schedtool -B -e ./x.py test src/test/ui
Time (mean ± σ): 46.930 s ± 0.064 s [User: 1634.344 s, System: 396.038 s]
Range (min … max): 46.759 s … 47.043 s 20 runs
```
There are more places that trigger auto_da_alloc behavior by overwriting existing files with O_TRUNC, but those are much harder to locate because `O_TRUNC` is set on `open()` but the writeback is triggered on `close()`. The latter is the part which shows up in profiles.
Let a portion of DefPathHash uniquely identify the DefPath's crate.
This allows to directly map from a `DefPathHash` to the crate it originates from, without constructing side tables to do that mapping -- something that is useful for incremental compilation where we deal with `DefPathHash` instead of `DefId` a lot.
It also allows to reliably and cheaply check for `DefPathHash` collisions which allows the compiler to gracefully abort compilation instead of running into a subsequent ICE at some random place in the code.
The following new piece of documentation describes the most interesting aspects of the changes:
```rust
/// A `DefPathHash` is a fixed-size representation of a `DefPath` that is
/// stable across crate and compilation session boundaries. It consists of two
/// separate 64-bit hashes. The first uniquely identifies the crate this
/// `DefPathHash` originates from (see [StableCrateId]), and the second
/// uniquely identifies the corresponding `DefPath` within that crate. Together
/// they form a unique identifier within an entire crate graph.
///
/// There is a very small chance of hash collisions, which would mean that two
/// different `DefPath`s map to the same `DefPathHash`. Proceeding compilation
/// with such a hash collision would very probably lead to an ICE and, in the
/// worst case, to a silent mis-compilation. The compiler therefore actively
/// and exhaustively checks for such hash collisions and aborts compilation if
/// it finds one.
///
/// `DefPathHash` uses 64-bit hashes for both the crate-id part and the
/// crate-internal part, even though it is likely that there are many more
/// `LocalDefId`s in a single crate than there are individual crates in a crate
/// graph. Since we use the same number of bits in both cases, the collision
/// probability for the crate-local part will be quite a bit higher (though
/// still very small).
///
/// This imbalance is not by accident: A hash collision in the
/// crate-local part of a `DefPathHash` will be detected and reported while
/// compiling the crate in question. Such a collision does not depend on
/// outside factors and can be easily fixed by the crate maintainer (e.g. by
/// renaming the item in question or by bumping the crate version in a harmless
/// way).
///
/// A collision between crate-id hashes on the other hand is harder to fix
/// because it depends on the set of crates in the entire crate graph of a
/// compilation session. Again, using the same crate with a different version
/// number would fix the issue with a high probability -- but that might be
/// easier said then done if the crates in questions are dependencies of
/// third-party crates.
///
/// That being said, given a high quality hash function, the collision
/// probabilities in question are very small. For example, for a big crate like
/// `rustc_middle` (with ~50000 `LocalDefId`s as of the time of writing) there
/// is a probability of roughly 1 in 14,750,000,000 of a crate-internal
/// collision occurring. For a big crate graph with 1000 crates in it, there is
/// a probability of 1 in 36,890,000,000,000 of a `StableCrateId` collision.
```
Given the probabilities involved I hope that no one will ever actually see the error messages. Nonetheless, I'd be glad about some feedback on how to improve them. Should we create a GH issue describing the problem and possible solutions to point to? Or a page in the rustc book?
r? `@pnkfelix` (feel free to re-assign)
Use u32 over Option<u32> in DebugLoc
~~Changes `Option<u32>` fields in `DebugLoc` to `Option<NonZeroU32>`. Since the respective fields (`line` and `col`) are guaranteed to be 1-based, this layout optimization is a freebie.~~
EDIT: Changes `Option<u32>` fields in `DebugLoc` to `u32`. As `@bugadani` pointed out, an `Option<NonZeroU32>` is probably an unnecessary layer of abstraction since the `None` variant is always used as `UNKNOWN_LINE_NUMBER` (which is just `0`). Also, `SourceInfo` in `metadata.rs` already uses a `u32` instead of an `Option<u32>` to encode the same information, so I think this change is warranted.
Since `@jyn514` raised some concerns over measuring performance in a similar PR (#82255), does this need a perf run?
Sync rustc_codegen_cranelift
The main highlight of this sync is removal of support for the old x86 Cranelift backend. This made it possible to use native atomic instructions rather than hackishly using a global mutex. 128bit integer support has also seen a few bugfixes and performance improvements. And finally I have formatted everything using the same rustfmt config as the rest of this repo.
r? ````@ghost````
````@rustbot```` label +A-codegen +A-cranelift +T-compiler
Cleanup rustdoc warnings
## Clean up error reporting for deprecated passes
Using `error!` here goes all the way back to the original commit, https://github.com/rust-lang/rust/pull/8540. I don't see any reason to use logging; rustdoc should use diagnostics wherever possible. See https://github.com/rust-lang/rust/pull/81932#issuecomment-785291244 for further context.
- Use spans for deprecated attributes
- Use a proper diagnostic for unknown passes, instead of error logging
- Add tests for unknown passes
- Improve some wording in diagnostics
## Report that `doc(plugins)` doesn't work using diagnostics instead of `eprintln!`
This also adds a test for the output.
This was added in https://github.com/rust-lang/rust/pull/52194. I don't see any particular reason not to use diagnostics here, I think it was just missed in https://github.com/rust-lang/rust/pull/50541.
Change built-in kernel targets to be os = none throughout
Whether for Rust's own `target_os`, LLVM's triples, or GNU config's, the
OS-related have fields have been for code running *on* that OS, not code
hat is *part* of the OS.
The difference is huge, as syscall interfaces are nothing like
freestanding interfaces. Kernels are (hypervisors and other more exotic
situations aside) freestanding programs that use the interfaces provided
by the hardware. It's *those* interfaces, the ones external to the
program being built and its software dependencies, that are the content
of the target.
For the Linux Kernel in particular, `target_env: "gnu"` is removed for
the same reason: that `-gnu` refers to glibc or GNU/linux, neither of
which applies to the kernel itself.
Relates to #74247
Move check only relevant in error case out of critical path
Move the check for potentially forgotten `return` in a tail expression
of arbitrary expressions into the coercion error branch to avoid
computing unncessary coercion checks on successful code.
Follow up to #81458.
