This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
This patch cleans up the remnants of the runtime IO interface.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This patch continues runtime removal by moving the tty implementations
into `sys`.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This patch continues runtime removal by moving out timer-related code
into `sys`.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This patch continues the runtime removal by moving and refactoring the
process implementation into the new `sys` module.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This patch continues the runtime removal by moving
libnative::io::helper_thread into sys::helper_signal and
sys_common::helper_thread
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This patch continues the runtime removal by moving pipe and
networking-related code into `sys`.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
This moves the filesystem implementation from libnative into the new
`sys` modules, refactoring along the way and hooking into `std::io::fs`.
Because this eliminates APIs in `libnative` and `librustrt`, it is a:
[breaking-change]
This functionality is likely to be available publicly, in some form,
from `std` in the future.
These modules will house the code that used to be part of the runtime system
in libnative. The `sys_common` module contains a few low-level but
cross-platform details. The `sys` module is set up using `#[cfg()]` to
include either a unix or windows implementation of a common API
surface. This API surface is *not* exported directly in `libstd`, but is
instead used to bulid `std::os` and `std::io`.
Ultimately, the low-level details in `sys` will be exposed in a
controlled way through a separate platform-specific surface, but that
setup is not part of this patch.
This commit renames a number of extension traits for slices and string
slices, now that they have been refactored for DST. In many cases,
multiple extension traits could now be consolidated. Further
consolidation will be possible with generalized where clauses.
The renamings are consistent with the [new `-Prelude`
suffix](https://github.com/rust-lang/rfcs/pull/344). There are probably
a few more candidates for being renamed this way, but that is left for
API stabilization of the relevant modules.
Because this renames traits, it is a:
[breaking-change]
However, I do not expect any code that currently uses the standard
library to actually break.
Closes#17917
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
Spring cleaning is here! In the Fall! This commit removes quite a large amount
of deprecated functionality from the standard libraries. I tried to ensure that
only old deprecated functionality was removed.
This is removing lots and lots of deprecated features, so this is a breaking
change. Please consult the deprecation messages of the deleted code to see how
to migrate code forward if it still needs migration.
[breaking-change]
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
Closes#17718
[rfc]: https://github.com/rust-lang/rfcs/pull/246
The bitshifts were wrong in that they invoked undefined behavior and
only passed the lower byte of the presumed-to-be-32bit errno value.
Apparently all actually possible values for errno happen to be easily
under 256, so this didn't cause any actual problems.
This commit fixes the bitshifts, but doesn't generalize to errno types
that aren't 32bit.
This breaks code like:
struct Foo {
...
}
pub fn make_foo() -> Foo {
...
}
Change this code to:
pub struct Foo { // note `pub`
...
}
pub fn make_foo() -> Foo {
...
}
The `visible_private_types` lint has been removed, since it is now an
error to attempt to expose a private type in a public API. In its place
a `#[feature(visible_private_types)]` gate has been added.
Closes#16463.
RFC #48.
[breaking-change]
Change to resolve and update compiler and libs for uses.
[breaking-change]
Enum variants are now in both the value and type namespaces. This means that
if you have a variant with the same name as a type in scope in a module, you
will get a name clash and thus an error. The solution is to either rename the
type or the variant.
type they provide an implementation for.
This breaks code like:
mod foo {
struct Foo { ... }
}
impl foo::Foo {
...
}
Change this code to:
mod foo {
struct Foo { ... }
impl Foo {
...
}
}
Additionally, if you used the I/O path extension methods `stat`,
`lstat`, `exists`, `is_file`, or `is_dir`, note that these methods have
been moved to the the `std::io::fs::PathExtensions` trait. This breaks
code like:
fn is_it_there() -> bool {
Path::new("/foo/bar/baz").exists()
}
Change this code to:
use std::io::fs::PathExtensions;
fn is_it_there() -> bool {
Path::new("/foo/bar/baz").exists()
}
Closes#17059.
RFC #155.
[breaking-change]
