Use a multipart suggestion instead of a single whole-span replacement:
```
error[E0796]: creating a shared reference to a mutable static
--> $DIR/reference-to-mut-static-unsafe-fn.rs:10:18
|
LL | let _y = &X;
| ^^ shared reference to mutable static
|
= note: this shared reference has lifetime `'static`, but if the static ever gets mutated, or a mutable reference is created, then any further use of this shared reference is Undefined Behavior
help: use `addr_of!` instead to create a raw pointer
|
LL | let _y = addr_of!(X);
| ~~~~~~~~~ +
```
Remove `DefId` from `EarlyParamRegion`
Currently we represent usages of `Region` parameters via the `ReEarlyParam` or `ReLateParam` variants. The `ReEarlyParam` is effectively equivalent to `TyKind::Param` and `ConstKind::Param` (i.e. it stores a `Symbol` and a `u32` index) however it also stores a `DefId` for the definition of the lifetime parameter.
This was used in roughly two places:
- Borrowck diagnostics instead of threading the appropriate `body_id` down to relevant locations. Interestingly there were already some places that had to pass down a `DefId` manually.
- Some opaque type checking logic was using the `DefId` field to track captured lifetimes
I've split this PR up into a commit for generate rote changes to diagnostics code to pass around a `DefId` manually everywhere, and another commit for the opaque type related changes which likely require more careful review as they might change the semantics of lints/errors.
Instead of manually passing the `DefId` around everywhere I previously tried to bundle it in with `TypeErrCtxt` but ran into issues with some call sites of `infcx.err_ctxt` being unable to provide a `DefId`, particularly places involved with trait solving and normalization. It might be worth investigating adding some new wrapper type to pass this around everywhere but I think this might be acceptable for now.
This pr also has the effect of reducing the size of `EarlyParamRegion` from 16 bytes -> 8 bytes. I wouldn't expect this to have any direct performance improvement however, other variants of `RegionKind` over `8` bytes are all because they contain a `BoundRegionKind` which is, as far as I know, mostly there for diagnostics. If we're ever able to remove this it would shrink the `RegionKind` type from `24` bytes to `12` (and with clever bit packing we might be able to get it to `8` bytes). I am curious what the performance impact would be of removing interning of `Region`'s if we ever manage to shrink `RegionKind` that much.
Sidenote: by removing the `DefId` the `Debug` output for `Region` has gotten significantly nicer. As an example see this opaque type debug print before vs after this PR:
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), [DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0, T, DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0])`
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), ['a/#0, T, 'a/#0])`
r? `@compiler-errors` (I would like someone who understands the opaque type setup to atleast review the type system commit, but the rest is likely reviewable by anyone)
```
error[E0382]: use of moved value: `t`
--> $DIR/use_of_moved_value_copy_suggestions.rs:7:9
|
LL | fn duplicate_t<T>(t: T) -> (T, T) {
| - move occurs because `t` has type `T`, which does not implement the `Copy` trait
...
LL | (t, t)
| - ^ value used here after move
| |
| value moved here
|
help: if `T` implemented `Clone`, you could clone the value
--> $DIR/use_of_moved_value_copy_suggestions.rs:4:16
|
LL | fn duplicate_t<T>(t: T) -> (T, T) {
| ^ consider constraining this type parameter with `Clone`
...
LL | (t, t)
| - you could clone this value
help: consider restricting type parameter `T`
|
LL | fn duplicate_t<T: Copy>(t: T) -> (T, T) {
| ++++++
```
The `help` is new. On ADTs, we also extend the output with span labels:
```
error[E0507]: cannot move out of static item `FOO`
--> $DIR/issue-17718-static-move.rs:6:14
|
LL | let _a = FOO;
| ^^^ move occurs because `FOO` has type `Foo`, which does not implement the `Copy` trait
|
note: if `Foo` implemented `Clone`, you could clone the value
--> $DIR/issue-17718-static-move.rs:1:1
|
LL | struct Foo;
| ^^^^^^^^^^ consider implementing `Clone` for this type
...
LL | let _a = FOO;
| --- you could clone this value
help: consider borrowing here
|
LL | let _a = &FOO;
| +
```
Start pointing to where bindings were declared when they are captured in closures:
```
error[E0597]: `x` does not live long enough
--> $DIR/suggest-return-closure.rs:23:9
|
LL | let x = String::new();
| - binding `x` declared here
...
LL | |c| {
| --- value captured here
LL | x.push(c);
| ^ borrowed value does not live long enough
...
LL | }
| -- borrow later used here
| |
| `x` dropped here while still borrowed
```
Suggest cloning in more cases involving closures:
```
error[E0507]: cannot move out of `foo` in pattern guard
--> $DIR/issue-27282-move-ref-mut-into-guard.rs:11:19
|
LL | if { (|| { let mut bar = foo; bar.take() })(); false } => {},
| ^^ --- move occurs because `foo` has type `&mut Option<&i32>`, which does not implement the `Copy` trait
| |
| `foo` is moved here
|
= note: variables bound in patterns cannot be moved from until after the end of the pattern guard
help: consider cloning the value if the performance cost is acceptable
|
LL | if { (|| { let mut bar = foo.clone(); bar.take() })(); false } => {},
| ++++++++
```
Detect borrow checker errors where `.clone()` would be an appropriate user action
When a value is moved twice, suggest cloning the earlier move:
```
error[E0509]: cannot move out of type `U2`, which implements the `Drop` trait
--> $DIR/union-move.rs:49:18
|
LL | move_out(x.f1_nocopy);
| ^^^^^^^^^^^
| |
| cannot move out of here
| move occurs because `x.f1_nocopy` has type `ManuallyDrop<RefCell<i32>>`, which does not implement the `Copy` trait
|
help: consider cloning the value if the performance cost is acceptable
|
LL | move_out(x.f1_nocopy.clone());
| ++++++++
```
When a value is borrowed by an `fn` call, consider if cloning the result of the call would be reasonable, and suggest cloning that, instead of the argument:
```
error[E0505]: cannot move out of `a` because it is borrowed
--> $DIR/variance-issue-20533.rs:53:14
|
LL | let a = AffineU32(1);
| - binding `a` declared here
LL | let x = bat(&a);
| -- borrow of `a` occurs here
LL | drop(a);
| ^ move out of `a` occurs here
LL | drop(x);
| - borrow later used here
|
help: consider cloning the value if the performance cost is acceptable
|
LL | let x = bat(&a).clone();
| ++++++++
```
otherwise, suggest cloning the argument:
```
error[E0505]: cannot move out of `a` because it is borrowed
--> $DIR/variance-issue-20533.rs:59:14
|
LL | let a = ClonableAffineU32(1);
| - binding `a` declared here
LL | let x = foo(&a);
| -- borrow of `a` occurs here
LL | drop(a);
| ^ move out of `a` occurs here
LL | drop(x);
| - borrow later used here
|
help: consider cloning the value if the performance cost is acceptable
|
LL - let x = foo(&a);
LL + let x = foo(a.clone());
|
```
This suggestion doesn't attempt to square out the types between what's cloned and what the `fn` expects, to allow the user to make a determination on whether to change the `fn` call or `fn` definition themselves.
Special case move errors caused by `FnOnce`:
```
error[E0382]: use of moved value: `blk`
--> $DIR/once-cant-call-twice-on-heap.rs:8:5
|
LL | fn foo<F:FnOnce()>(blk: F) {
| --- move occurs because `blk` has type `F`, which does not implement the `Copy` trait
LL | blk();
| ----- `blk` moved due to this call
LL | blk();
| ^^^ value used here after move
|
note: `FnOnce` closures can only be called once
--> $DIR/once-cant-call-twice-on-heap.rs:6:10
|
LL | fn foo<F:FnOnce()>(blk: F) {
| ^^^^^^^^ `F` is made to be an `FnOnce` closure here
LL | blk();
| ----- this value implements `FnOnce`, which causes it to be moved when called
```
Account for redundant `.clone()` calls in resulting suggestions:
```
error[E0507]: cannot move out of dereference of `S`
--> $DIR/needs-clone-through-deref.rs:15:18
|
LL | for _ in self.clone().into_iter() {}
| ^^^^^^^^^^^^ ----------- value moved due to this method call
| |
| move occurs because value has type `Vec<usize>`, which does not implement the `Copy` trait
|
note: `into_iter` takes ownership of the receiver `self`, which moves value
--> $SRC_DIR/core/src/iter/traits/collect.rs:LL:COL
help: you can `clone` the value and consume it, but this might not be your desired behavior
|
LL | for _ in <Vec<usize> as Clone>::clone(&self).into_iter() {}
| ++++++++++++++++++++++++++++++ ~
```
We use the presence of `&mut` values in a move error as a proxy for the user caring about side effects, so we don't emit a clone suggestion in that case:
```
error[E0505]: cannot move out of `s` because it is borrowed
--> $DIR/borrowck-overloaded-index-move-index.rs:53:7
|
LL | let mut s = "hello".to_string();
| ----- binding `s` declared here
LL | let rs = &mut s;
| ------ borrow of `s` occurs here
...
LL | f[s] = 10;
| ^ move out of `s` occurs here
...
LL | use_mut(rs);
| -- borrow later used here
```
We properly account for `foo += foo;` errors where we *don't* suggest `foo.clone() += foo;`, instead suggesting `foo += foo.clone();`.
---
Each commit can be reviewed in isolation. There are some "cleanup" commits, but kept them separate in order to show *why* specific changes were being made, and their effect on tests' output.
Fix#49693, CC #64167.
```
error[E0507]: cannot move out of `val`, a captured variable in an `FnMut` closure
--> $DIR/issue-87456-point-to-closure.rs:10:28
|
LL | let val = String::new();
| --- captured outer variable
LL |
LL | take_mut(|| {
| -- captured by this `FnMut` closure
LL |
LL | let _foo: String = val;
| ^^^ move occurs because `val` has type `String`, which does not implement the `Copy` trait
|
help: consider borrowing here
|
LL | let _foo: String = &val;
| +
help: consider cloning the value if the performance cost is acceptable
|
LL | let _foo: String = val.clone();
| ++++++++
```
```
error[E0507]: cannot move out of `*x` which is behind a shared reference
--> $DIR/borrowck-fn-in-const-a.rs:6:16
|
LL | return *x
| ^^ move occurs because `*x` has type `String`, which does not implement the `Copy` trait
|
help: consider cloning the value if the performance cost is acceptable
|
LL - return *x
LL + return x.clone()
|
```
Tweak value suggestions in `borrowck` and `hir_analysis`
Unify the output of `suggest_assign_value` and `ty_kind_suggestion`.
Ideally we'd make these a single function, but doing so would likely require modify the crate dependency tree.
Unify the output of `suggest_assign_value` and `ty_kind_suggestion`.
Ideally we'd make these a single function, but doing so would likely require modify the crate dependency tree.
Split an item bounds and an item's super predicates
This is the moral equivalent of #107614, but instead for predicates this applies to **item bounds**. This PR splits out the item bounds (i.e. *all* predicates that are assumed to hold for the alias) from the item *super predicates*, which are the subset of item bounds which share the same self type as the alias.
## Why?
Much like #107614, there are places in the compiler where we *only* care about super-predicates, and considering predicates that possibly don't have anything to do with the alias is problematic. This includes things like closure signature inference (which is at its core searching for `Self: Fn(..)` style bounds), but also lints like `#[must_use]`, error reporting for aliases, computing type outlives predicates.
Even in cases where considering all of the `item_bounds` doesn't lead to bugs, unnecessarily considering irrelevant bounds does lead to a regression (#121121) due to doing extra work in the solver.
## Example 1 - Trait Aliases
This is best explored via an example:
```
type TAIT<T> = impl TraitAlias<T>;
trait TraitAlias<T> = A + B where T: C;
```
The item bounds list for `Tait<T>` will include:
* `Tait<T>: A`
* `Tait<T>: B`
* `T: C`
While `item_super_predicates` query will include just the first two predicates.
Side-note: You may wonder why `T: C` is included in the item bounds for `TAIT`? This is because when we elaborate `TraitAlias<T>`, we will also elaborate all the predicates on the trait.
## Example 2 - Associated Type Bounds
```
type TAIT<T> = impl Iterator<Item: A>;
```
The `item_bounds` list for `TAIT<T>` will include:
* `Tait<T>: Iterator`
* `<Tait<T> as Iterator>::Item: A`
But the `item_super_predicates` will just include the first bound, since that's the only bound that is relevant to the *alias* itself.
## So what
This leads to some diagnostics duplication just like #107614, but none of it will be user-facing. We only see it in the UI test suite because we explicitly disable diagnostic deduplication.
Regarding naming, I went with `super_predicates` kind of arbitrarily; this can easily be changed, but I'd consider better names as long as we don't block this PR in perpetuity.
