(This is a large commit. The changes to
`compiler/rustc_middle/src/ty/context.rs` are the most important ones.)
The current naming scheme is a mess, with a mix of `_intern_`, `intern_`
and `mk_` prefixes, with little consistency. In particular, in many
cases it's easy to use an iterator interner when a (preferable) slice
interner is available.
The guiding principles of the new naming system:
- No `_intern_` prefixes.
- The `intern_` prefix is for internal operations.
- The `mk_` prefix is for external operations.
- For cases where there is a slice interner and an iterator interner,
the former is `mk_foo` and the latter is `mk_foo_from_iter`.
Also, `slice_interners!` and `direct_interners!` can now be `pub` or
non-`pub`, which helps enforce the internal/external operations
division.
It's not perfect, but I think it's a clear improvement.
The following lists show everything that was renamed.
slice_interners
- const_list
- mk_const_list -> mk_const_list_from_iter
- intern_const_list -> mk_const_list
- substs
- mk_substs -> mk_substs_from_iter
- intern_substs -> mk_substs
- check_substs -> check_and_mk_substs (this is a weird one)
- canonical_var_infos
- intern_canonical_var_infos -> mk_canonical_var_infos
- poly_existential_predicates
- mk_poly_existential_predicates -> mk_poly_existential_predicates_from_iter
- intern_poly_existential_predicates -> mk_poly_existential_predicates
- _intern_poly_existential_predicates -> intern_poly_existential_predicates
- predicates
- mk_predicates -> mk_predicates_from_iter
- intern_predicates -> mk_predicates
- _intern_predicates -> intern_predicates
- projs
- intern_projs -> mk_projs
- place_elems
- mk_place_elems -> mk_place_elems_from_iter
- intern_place_elems -> mk_place_elems
- bound_variable_kinds
- mk_bound_variable_kinds -> mk_bound_variable_kinds_from_iter
- intern_bound_variable_kinds -> mk_bound_variable_kinds
direct_interners
- region
- intern_region (unchanged)
- const
- mk_const_internal -> intern_const
- const_allocation
- intern_const_alloc -> mk_const_alloc
- layout
- intern_layout -> mk_layout
- adt_def
- intern_adt_def -> mk_adt_def_from_data (unusual case, hard to avoid)
- alloc_adt_def(!) -> mk_adt_def
- external_constraints
- intern_external_constraints -> mk_external_constraints
Other
- type_list
- mk_type_list -> mk_type_list_from_iter
- intern_type_list -> mk_type_list
- tup
- mk_tup -> mk_tup_from_iter
- intern_tup -> mk_tup
Use `target` instead of `machine` for mir interpreter integer handling.
The naming of `machine` only makes sense from a mir interpreter internals perspective, but outside users talk about the `target` platform. As per https://github.com/rust-lang/rust/pull/108029#issuecomment-1429791015
r? `@RalfJung`
Avoid accessing HIR when it can be avoided
Experiment to see if it helps some incremental cases.
Will be rebased once https://github.com/rust-lang/rust/pull/107942 gets merged.
r? `@ghost`
Implement `deferred_projection_equality` for erica solver
Somewhat of a revival of #96912. When relating projections now emit an `AliasEq` obligation instead of attempting to determine equality of projections that may not be as normalized as possible (i.e. because of lazy norm, or just containing inference variables that prevent us from resolving an impl). Only do this when the new solver is enabled
Use stable metric for const eval limit instead of current terminator-based logic
This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only.
The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made).
Also see: #103877
Remove HirId -> LocalDefId map from HIR.
Having this map in HIR prevents the creating of new definitions after HIR has been built.
Thankfully, we do not need it.
Based on https://github.com/rust-lang/rust/pull/103902
Move format_args!() into AST (and expand it during AST lowering)
Implements https://github.com/rust-lang/compiler-team/issues/541
This moves FormatArgs from rustc_builtin_macros to rustc_ast_lowering. For now, the end result is the same. But this allows for future changes to do smarter things with format_args!(). It also allows Clippy to directly access the ast::FormatArgs, making things a lot easier.
This change turns the format args types into lang items. The builtin macro used to refer to them by their path. After this change, the path is no longer relevant, making it easier to make changes in `core`.
This updates clippy to use the new language items, but this doesn't yet make clippy use the ast::FormatArgs structure that's now available. That should be done after this is merged.
[needless_return]: Remove all semicolons on suggestion
Closes#10182
Multiple semicolons currently breaks autofix for `needless_return` suggestions. Any semicolons left after removing return means that the return type will always be `()`, and thus fail to compile.
This PR allows `needless_return` to remove multiple semicolons.
The change won't cover the case where there is multiple line yet.
i.e.
```rust
fn needless_return() -> bool {
return true;
;;
}
```
---
changelog: Sugg: [`needless_return`]: Now removes all semicolons on the same line
[#10187](https://github.com/rust-lang/rust-clippy/pull/10187)
<!-- changelog_checked -->
chore: add simple comment for `get_enclosing_block`
I was reading the code of `clippy_utils/src/lib.rs` and thought that adding comment on `get_closing_block` would be helpful to first time visitor.
---
changelog: none
<!-- changelog_checked -->
This commit makes the ContainsName struct visit all interior
expressions, which means that ContainsName will return true
even if `name` is used in a closure within `expr`.
Rollup of 9 pull requests
Successful merges:
- #104531 (Provide a better error and a suggestion for `Fn` traits with lifetime params)
- #105899 (`./x doc library --open` opens `std`)
- #106190 (Account for multiple multiline spans with empty padding)
- #106202 (Trim more paths in obligation types)
- #106234 (rustdoc: simplify settings, help, and copy button CSS by not reusing)
- #106236 (docs/test: add docs and a UI test for `E0514` and `E0519`)
- #106259 (Update Clippy)
- #106260 (Fix index out of bounds issues in rustdoc)
- #106263 (Formatter should not try to format non-Rust files)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Improve `possible_borrower`
This PR makes several improvements to `clippy_uitls::mir::possible_borrower`. These changes benefit both `needless_borrow` and `redundant clone`.
1. **Use the compiler's `MaybeStorageLive` analysis**
I could spot not functional differences between the one in the compiler and the one in Clippy's repository. So, I removed the latter in favor of the the former.
2. **Make `PossibleBorrower` a dataflow analysis instead of a visitor**
The main benefit of this change is that allows `possible_borrower` to take advantage of statements' relative locations, which is easier to do in an analysis than in a visitor.
This is easier to illustrate with an example, so consider this one:
```rust
fn foo(cx: &LateContext<'_>, lint: &'static Lint) {
cx.struct_span_lint(lint, rustc_span::Span::default(), "", |diag| diag.note(&String::new()));
// ^
}
```
We would like to flag the `&` pointed to by the `^` for removal. `foo`'s MIR begins like this:
```rust
fn span_lint::foo::{closure#0}(_1: [closure@$DIR/needless_borrow.rs:396:68: 396:74], _2: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>) -> &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()> {
debug diag => _2; // in scope 0 at $DIR/needless_borrow.rs:396:69: 396:73
let mut _0: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // return place in scope 0 at $DIR/needless_borrow.rs:396:75: 396:75
let mut _3: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // in scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
let mut _4: &mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>; // in scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
let mut _5: &std::string::String; // in scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
let _6: std::string::String; // in scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
bb0: {
StorageLive(_3); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
StorageLive(_4); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
_4 = &mut (*_2); // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
StorageLive(_5); // scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
StorageLive(_6); // scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
_6 = std::string::String::new() -> bb1; // scope 0 at $DIR/needless_borrow.rs:396:86: 396:99
// mir::Constant
// + span: $DIR/needless_borrow.rs:396:86: 396:97
// + literal: Const { ty: fn() -> std::string::String {std::string::String::new}, val: Value(<ZST>) }
}
bb1: {
_5 = &_6; // scope 0 at $DIR/needless_borrow.rs:396:85: 396:99
_3 = rustc_errors::diagnostic_builder::DiagnosticBuilder::<'_, ()>::note::<&std::string::String>(move _4, move _5) -> [return: bb2, unwind: bb4]; // scope 0 at $DIR/needless_borrow.rs:396:75: 396:100
// mir::Constant
// + span: $DIR/needless_borrow.rs:396:80: 396:84
// + literal: Const { ty: for<'a> fn(&'a mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()>, &std::string::String) -> &'a mut rustc_errors::diagnostic_builder::DiagnosticBuilder<'_, ()> {rustc_errors::diagnostic_builder::DiagnosticBuilder::<'_, ()>::note::<&std::string::String>}, val: Value(<ZST>) }
}
```
The call to `diag.note` appears in `bb1` on the line beginning with `_3 =`. The `String` is owned by `_6`. So, in the call to `diag.note`, we would like to know whether there are any references to `_6` besides `_5`.
The old, visitor approach did not consider the relative locations of statements. So all borrows were treated the same, *even if they occurred after the location of interest*.
For example, before the `_3 = ...` call, the possible borrowers of `_6` would be just `_5`. But after the call, the possible borrowers would include `_2`, `_3`, and `_4`.
So, in a sense, the call from which we are try to remove the needless borrow is trying to prevent us from removing the needless borrow(!).
With an analysis, things do not get so muddled. We can determine the set of possible borrowers at any specific location, e.g., using a `ResultsCursor`.
3. **Change `only_borrowers` to `at_most_borrowers`**
`possible_borrowers` exposed a function `only_borrowers` that determined whether the borrowers of some local were *exactly* some set `S`. But, from what I can tell, this was overkill. For the lints that currently use `possible_borrower` (`needless_borrow` and `redundant_clone`), all we really want to know is whether there are borrowers *other than* those in `S`. (Put another way, we only care about the subset relation in one direction.) The new function `at_most_borrowers` takes this more tailored approach.
4. **Compute relations "on the fly" rather than using `transitive_relation`**
The visitor would compute and store the transitive closure of the possible borrower relation for an entire MIR body.
But with an analysis, there is effectively a different possible borrower relation at each location in the body. Computing and storing a transitive closure at each location would not be practical.
So the new approach is to compute the transitive closure on the fly, as needed. But the new approach might actually be more efficient, as I now explain.
In all current uses of `at_most_borrowers` (previously `only_borrowers`), the size of the set of borrowers `S` is at most 2. So you need only check at most three borrowers to determine whether the subset relation holds. That is, once you have found a third borrower, you can stop, since you know the relation cannot hold.
Note that `transitive_relation` is still used by `clippy_uitls::mir::possible_origin` (a kind of "subroutine" of `possible_borrower`).
cc: `@Jarcho`
---
changelog: [`needless_borrow`], [`redundant_clone`]: Now track references better and detect more cases
[#9701](https://github.com/rust-lang/rust-clippy/pull/9701)
<!-- changelog_checked -->
Avoid `match_wildcard_for_single_variants` on guarded wild matches
fix#9993
changelog: FP: [`match_wildcard_for_single_variants`]: No longer lints on wildcards with a guard
[#10056](https://github.com/rust-lang/rust-clippy/pull/10056)
<!-- changelog_checked -->
r? `@Jarcho`
Remove `token::Lit` from `ast::MetaItemLit`.
Currently `ast::MetaItemLit` represents the literal kind twice. This PR removes that redundancy. Best reviewed one commit at a time.
r? `@petrochenkov`
rustc_ast_lowering: Stop lowering imports into multiple items
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
This is required to distinguish between cooked and raw byte string
literals in an `ast::LitKind`, without referring to an adjacent
`token::Lit`. It's a prerequisite for the next commit.
Treat custom enum discriminant values as constants
fixes#9882
changelog: All lints: Don't lint in enum discriminant values when the suggestion won't work in a const context
Lower them into a single item with multiple resolutions instead.
This also allows to remove additional `NodId`s and `DefId`s related to those additional items.
Separate lifetime ident from lifetime resolution in HIR
Drive-by: change how suggested generic args are computed.
Fixes https://github.com/rust-lang/rust/issues/103815
I recommend reviewing commit-by-commit.
Add `clippy_utils::msrv::Msrv` to keep track of the current MSRV
changelog: Fix the scoping of the `#![clippy::msrv]` attribute
Fixes#6920
r? `@Jarcho`
Fix [`unnecessary_lazy_eval`] when type has significant drop
fix for https://github.com/rust-lang/rust-clippy/issues/9427#issuecomment-1295742590
However current implementation gives too many false positive, rending the lint almost useless.
I don't know what's the best way to check if a type has a "significant" drop (in the common meaning, not the internal rustc one, for example Option<(u8, u8)> should not be considered significant)
changelog: Fix [`unnecessary_lazy_eval`] when type has significant drop
Update Clippy
r? `@Manishearth`
Sorry for taking so long. There were so many blockers and so little time. This situation should be mitigated with #104007 in the future.
Rollup of 11 pull requests
Successful merges:
- #103396 (Pin::new_unchecked: discuss pinning closure captures)
- #104416 (Fix using `include_bytes` in pattern position)
- #104557 (Add a test case for async dyn* traits)
- #104559 (Split `MacArgs` in two.)
- #104597 (Probe + better error messsage for `need_migrate_deref_output_trait_object`)
- #104656 (Move tests)
- #104657 (Do not check transmute if has non region infer)
- #104663 (rustdoc: factor out common button CSS)
- #104666 (Migrate alias search result to CSS variables)
- #104674 (Make negative_impl and negative_impl_exists take the right types)
- #104692 (Update test's cfg-if dependency to 1.0)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
`MacArgs` is an enum with three variants: `Empty`, `Delimited`, and `Eq`. It's
used in two ways:
- For representing attribute macro arguments (e.g. in `AttrItem`), where all
three variants are used.
- For representing function-like macros (e.g. in `MacCall` and `MacroDef`),
where only the `Delimited` variant is used.
In other words, `MacArgs` is used in two quite different places due to them
having partial overlap. I find this makes the code hard to read. It also leads
to various unreachable code paths, and allows invalid values (such as
accidentally using `MacArgs::Empty` in a `MacCall`).
This commit splits `MacArgs` in two:
- `DelimArgs` is a new struct just for the "delimited arguments" case. It is
now used in `MacCall` and `MacroDef`.
- `AttrArgs` is a renaming of the old `MacArgs` enum for the attribute macro
case. Its `Delimited` variant now contains a `DelimArgs`.
Various other related things are renamed as well.
These changes make the code clearer, avoids several unreachable paths, and
disallows the invalid values.
Improve spans for RPITIT object-safety errors
No reason why we can't point at the `impl Trait` that causes the object-safety violation.
Also [drive-by: Add is_async fn to hir::IsAsync](c4165f3a96), which touches clippy too.
Return multiple resolutions from `def_path_res`
Changes `def_path_res` to return all the resolutions matching the path rather than the first one (with a namespace hint that covered some cases). This would fix any issues that come up with multiple versions of the same crate being present as they all have the same crate name
It also adds resolution of `impl _ {}` items for local items, and removes struct field resolution as it didn't seem to be used anywhere
I tested it on a local crate and it worked for the multiple crate issue, but I couldn't come up with a test that worked well with `// aux-build`, maybe `// aux-crate` after https://github.com/rust-lang/rust/pull/103266 could work but I'm not sure on that either
changelog: [`disallowed_methods`], [`disallowed_types`], [`disallowed_macros`]: fix path resolution with multiple versions of the same crate
changelog: [`disallowed_methods`]: Resolve methods in `impl`s in the current crate
Instead of `ast::Lit`.
Literal lowering now happens at two different times. Expression literals
are lowered when HIR is crated. Attribute literals are lowered during
parsing.
This commit changes the language very slightly. Some programs that used
to not compile now will compile. This is because some invalid literals
that are removed by `cfg` or attribute macros will no longer trigger
errors. See this comment for more details:
https://github.com/rust-lang/rust/pull/102944#issuecomment-1277476773
[`fn_params_excessive_bools`] Make it possible to allow the lint at the method level
changelog: FP: [`fn_params_excessive_bools`]: `#[allow]` now works on methods
fix https://github.com/rust-lang/rust-clippy/issues/9687
Tested without committing but `#[allow]`ing now works. Also rewrote the lint to be a late lint while at it :)
r? `@xFrednet`
