The install command should work now, though it only installs
in-place (anything else has to wait until I implement RUST_PATH).
Also including:
core: Add remove_directory_recursive, change copy_file
Make copy_file preserve permissions, and add a remove_directory_recursive
function.
After much discussion on IRC and #4819, we have decided to revert to the old naming of the `/` operator. This does not change its behavior. In making this change, we also have had to rename some of the methods in the `Integer` trait. Here is a list of the methods that have changed:
- `Quot::quot` -> `Div::div`
- `Rem::rem` - stays the same
- `Integer::quot_rem` -> `Integer::div_rem`
- `Integer::div` -> `Integer::div_floor`
- `Integer::modulo` -> `Integer::mod_floor`
- `Integer::div_mod` -> `Integer::div_mod_floor`
`std::bigint` contains the following code.
```rust
borrow = *elem << (uint::bits - n_bits);
```
The code above contains a bug that the value of the right operand of the shift operator exceeds the size of the left operand,
because sizeof(*elem) == 32, and 0 <= n_bits < 32 in 64bit architecture.
If `--opt-level` option is not given to rustc, the code above runs as if the right operand is `(uint::bits - n_bits) % 32`,
but if --opt-level is given, `borrow` is always zero.
I wonder why this bug is not catched in the libstd's testsuite (I try the `rustc --test --opt-level=2 bigint.rs` before fixing the bug,
but the unittest passes normally.)
This pull request also removes the implicit vector copies in `bigint.rs`.
As discussed on issue #4819, I have created four new traits: `Algebraic`, `Trigonometric`, `Exponential` and `Hyperbolic`, and moved the appropriate methods into them from `Real`.
~~~rust
pub trait Algebraic {
fn pow(&self, n: Self) -> Self;
fn sqrt(&self) -> Self;
fn rsqrt(&self) -> Self;
fn cbrt(&self) -> Self;
fn hypot(&self, other: Self) -> Self;
}
pub trait Trigonometric {
fn sin(&self) -> Self;
fn cos(&self) -> Self;
fn tan(&self) -> Self;
fn asin(&self) -> Self;
fn acos(&self) -> Self;
fn atan(&self) -> Self;
fn atan2(&self, other: Self) -> Self;
}
pub trait Exponential {
fn exp(&self) -> Self;
fn exp2(&self) -> Self;
fn expm1(&self) -> Self;
fn log(&self) -> Self;
fn log2(&self) -> Self;
fn log10(&self) -> Self;
}
pub trait Hyperbolic: Exponential {
fn sinh(&self) -> Self;
fn cosh(&self) -> Self;
fn tanh(&self) -> Self;
}
~~~
There was some discussion over whether we should shorten the names, for example `Trig` and `Exp`. No abbreviations have been agreed on yet, but this could be considered in the future.
Additionally, `Integer::divisible_by` has been renamed to `Integer::is_multiple_of`.
borrow = *elem << (uint::bits - n_bits);
The code above contains a bug that the value of the right operand of the shift operator exceeds the size of the left operand,
because sizeof(*elem) == 32, and 0 <= n_bits < 32 in 64bit architecture.
If `--opt-level` option is not given to rustc, the code above runs as if the right operand is `(uint::bits - n_bits) % 32`,
but if --opt-level is given, `borrow` is always zero.
I wonder why this bug is not catched in the libstd's testsuite (I try the `rustc --test --opt-level=2 bigint.rs` before fixing the bug,
but the unittest passes normally.)
As part of the numeric trait reform (see issue #4819), I have added the following traits to `core::num` and implemented them for Rust's primitive numeric types:
~~~rust
pub trait Bitwise: Not<Self>
+ BitAnd<Self,Self>
+ BitOr<Self,Self>
+ BitXor<Self,Self>
+ Shl<Self,Self>
+ Shr<Self,Self> {}
pub trait BitCount {
fn population_count(&self) -> Self;
fn leading_zeros(&self) -> Self;
fn trailing_zeros(&self) -> Self;
}
pub trait Bounded {
fn min_value() -> Self;
fn max_value() -> Self;
}
pub trait Primitive: Num
+ NumCast
+ Bounded
+ Neg<Self>
+ Add<Self,Self>
+ Sub<Self,Self>
+ Mul<Self,Self>
+ Quot<Self,Self>
+ Rem<Self,Self> {
fn bits() -> uint;
fn bytes() -> uint;
}
pub trait Int: Integer
+ Primitive
+ Bitwise
+ BitCount {}
pub trait Float: Real
+ Signed
+ Primitive {
fn NaN() -> Self;
fn infinity() -> Self;
fn neg_infinity() -> Self;
fn neg_zero() -> Self;
fn is_NaN(&self) -> bool;
fn is_infinite(&self) -> bool;
fn is_finite(&self) -> bool;
fn mantissa_digits() -> uint;
fn digits() -> uint;
fn epsilon() -> Self;
fn min_exp() -> int;
fn max_exp() -> int;
fn min_10_exp() -> int;
fn max_10_exp() -> int;
fn mul_add(&self, a: Self, b: Self) -> Self;
fn next_after(&self, other: Self) -> Self;
}
~~~
Note: I'm not sure my implementation for `BitCount::trailing_zeros` and `BitCount::leading_zeros` is correct for uints. I also need some assistance creating appropriate unit tests for them.
More work needs to be done in implementing specialized primitive floating-point and integer methods, but I'm beginning to reach the limits of my knowledge. Please leave your suggestions/critiques/ideas on #4819 if you have them – I'd very much appreciate hearing them.
I have also added an `Orderable` trait:
~~~rust
pub trait Orderable: Ord {
fn min(&self, other: &Self) -> Self;
fn max(&self, other: &Self) -> Self;
fn clamp(&self, mn: &Self, mx: &Self) -> Self;
}
~~~
This is a temporary trait until we have default methods. We don't want to encumber all implementors of Ord by requiring them to implement these functions, but at the same time we want to be able to take advantage of the speed of the specific numeric functions (like the `fmin` and `fmax` intrinsics).
From a cursory `git grep` this removes the last part of `core` that requires on `@` (other than `io` and the task local data section).
It renames `RandRes` to ~~StdRng~~ `IsaacRng` and `XorShiftState` to `XorShiftRng` as well as moving their constructors to static methods. To go with this, it adds `rng()` which is designed to be used when the programmer just wants a random number generator, without caring about which exact algorithm is being used.
It also removes all the `gen_int`, `gen_uint`, `gen_char` (etc) methods on `RngUtil` (by moving the defintions to the actual `Rand` instances). The replacement is using `RngUtil::gen`, either type-inferred or with an annotation (`rng.gen::<uint>()`).
I tried to have the `Rng` and `RngUtil` traits exported by `core::prelude` (since `core::rand` (except for `random()`) is useless without them), but this caused [an explosion of (seemingly unrelated) `error: unresolved import`'s](https://gist.github.com/5451839).
This moves all the basic random value generation into the Rand instances for
each type and then removes the `gen_int`, `gen_char` (etc) methods on RngUtil,
leaving only the generic `gen` and the more specialised methods.
Also, removes some imports that are redundant due to a `use core::prelude::*`
statement.
Closes#3083.
This takes a similar approach to #5797 where a set is present on the `tcx` of used mutable definitions. Everything is by default warned about, and analyses must explicitly add mutable definitions to this set so they're not warned about.
Most of this was pretty straightforward, although there was one caveat that I ran into when implementing it. Apparently when the old modes are used (or maybe `legacy_modes`, I'm not sure) some different code paths are taken to cause spurious warnings to be issued which shouldn't be issued. I'm not really sure how modes even worked, so I was having a lot of trouble tracking this down. I figured that because they're a legacy thing that I'd just de-mode the compiler so that the warnings wouldn't be a problem anymore (or at least for the compiler).
Other than that, the entire compiler compiles without warnings of unused mutable variables. To prevent bad warnings, #5965 should be landed (which in turn is waiting on #5963) before landing this. I figured I'd stick it out for review anyway though.
This patch is a sledge hammer that moves all tests into `#[cfg(test)] mod test { .. }`, and makes them private, there were several instances of `pub mod tests { #[test] pub fn ... } `.
(The reason for this is I was playing with using `syntax` to index code ([result so far](http://www.ug.it.usyd.edu.au/~hwil7821/rust-api/)) and it was getting some junk from the tests.)
The rustdoc commit is particularly brutal, so it's fine if that one isn't landed.
This adds examples for the methods in std::base64.
Each example is complete in the sense that you can copy-paste it into a file and compile it successfully without adding anything (imports, etc). The hardest part of figuring out how to use this was figuring out the right import statements to put at the top.
Mostly just phrasing things differently, which is a matter of taste. Feel free to use or not use any of the changes I'm suggesting.
I would say this one thing should be changed, though, not necessarily the way I changed it here.
* Convert any string (literal, `@`, `&`, `~`)
* that contains a base64 encoded value, to the byte values it encodes.
If this structure is going to be used, either the entire clause, 'that contains a base64 encoded value', should be bracketed by commas, or the comma at the end of the clause should be removed.
Good morning,
This first patch series adds support for `#[deriving(Decodable, Encodable)]`, but does not yet remove `#[auto_encode]` and `#[auto_decode]`. I need a snapshot to remove the old code. Along the way it also extends support for tuple structs and struct enum variants.
Also, it includes a minor fix to the pretty printer. We decided a while ago to use 4 spaces to indent a match arm instead of 2. This updates the pretty printer to reflect that.
rather than a tuple. The current setup iterates over
`BaseIter<(&'self K, &'self V)>` where 'self is a lifetime declared
*in the each method*. You can't place such a type in
the impl declaration. The compiler currently allows it,
but this will not be legal under #5656 and I'm pretty sure
it's not sound now.
@nikomatsakis and I were talking about how the serializers were a bit too complicated. None of the users of With the `emit_option` and `read_option` functions, the serializers are now moving more high level. This patch series continues that trend. I've removed support for emitting specific string and vec types, and added support for emitting mapping types.
I believe this patch incorporates all expected syntax changes from extern
function reform (#3678). You can now write things like:
extern "<abi>" fn foo(s: S) -> T { ... }
extern "<abi>" mod { ... }
extern "<abi>" fn(S) -> T
The ABI for foreign functions is taken from this syntax (rather than from an
annotation). We support the full ABI specification I described on the mailing
list. The correct ABI is chosen based on the target architecture.
Calls by pointer to C functions are not yet supported, and the Rust type of
crust fns is still *u8.
Hey folks,
This patch series does some work on the json decoder, specifically with auto decoding of enums. Previously, we would take this code:
```
enum A {
B,
C(~str, uint)
}
```
and would encode a value of this enum to either `["B", []]` or `["C", ["D", 123]]`. I've changed this to `"B"` or `["C", "D", 123]`. This matches the style of the O'Caml json library [json-wheel](http://mjambon.com/json-wheel.html). I've added tests to make sure all this work.
In order to make this change, I added passing a `&[&str]` vec to `Decode::emit_enum_variant` so the json decoder can convert the name of a variant into it's position. I also changed the impl of `Encodable` for `Option<T>` to have the right upper casing.
I also did some work on the parser, which allows for `fn foo<T: ::cmp::Eq>() { ... }` statements (#5572), fixed the pretty printer properly expanding `debug!("...")` expressions, and removed `ast::expr_vstore_fixed`, which doesn't appear to be used anymore.
Because the json::Decoder uses the string variant name, we need a
way to correlate the string to the enum index. This passes in a
static &[&str] to read_enum_variant, which allows the json::Decoder
to know which branch it's trying to process.