`To` is better than `Create` for indicating that this is a non-consuming
conversion, rather than creating something out of nothing.
And the addition of `Attr` is because the current names makes them sound
like they relate to `TokenStream`, but really they relate to
`AttrTokenStream`.
These two type names are long and have long matching prefixes. I find
them hard to read, especially in combinations like
`AttrAnnotatedTokenStream::new(vec![AttrAnnotatedTokenTree::Token(..)])`.
This commit renames them as `AttrToken{Stream,Tree}`.
Debuginfo line information for macro invocations are collapsed by
default - line information are replaced by the line of the outermost
expansion site. Using `-Zdebug-macros` disables this behaviour.
When the `collapse_debuginfo` feature is enabled, the default behaviour
is reversed so that debuginfo is not collapsed by default. In addition,
the `#[collapse_debuginfo]` attribute is available and can be applied to
macro definitions which will then have their line information collapsed.
Signed-off-by: David Wood <david.wood@huawei.com>
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
proc_macro/bridge: send diagnostics over the bridge as a struct
This removes some RPC when creating and emitting diagnostics, and
simplifies the bridge slightly.
After this change, there are no remaining methods which take advantage
of the support for `&mut` references to objects in the store as
arguments, meaning that support for them could technically be removed if
we wanted. The only remaining uses of immutable references into the
store are `TokenStream` and `SourceFile`.
r? `@eddyb`
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
In some places we use `Vec<Attribute>` and some places we use
`ThinVec<Attribute>` (a.k.a. `AttrVec`). This results in various points
where we have to convert between `Vec` and `ThinVec`.
This commit changes the places that use `Vec<Attribute>` to use
`AttrVec`. A lot of this is mechanical and boring, but there are
some interesting parts:
- It adds a few new methods to `ThinVec`.
- It implements `MapInPlace` for `ThinVec`, and introduces a macro to
avoid the repetition of this trait for `Vec`, `SmallVec`, and
`ThinVec`.
Overall, it makes the code a little nicer, and has little effect on
performance. But it is a precursor to removing
`rustc_data_structures::thin_vec::ThinVec` and replacing it with
`thin_vec::ThinVec`, which is implemented more efficiently.
Migrations for rustc_expand transcribe.rs
This PR includes some migrations to the new diagnostics API for the `rustc_expand` module.
r? ```@davidtwco```
- Rename `ast::Lit::token` as `ast::Lit::token_lit`, because its type is
`token::Lit`, which is not a token. (This has been confusing me for a
long time.)
reasonable because we have an `ast::token::Lit` inside an `ast::Lit`.
- Rename `LitKind::{from,to}_lit_token` as
`LitKind::{from,to}_token_lit`, to match the above change and
`token::Lit`.
Implement `#[rustc_default_body_unstable]`
This PR implements a new stability attribute — `#[rustc_default_body_unstable]`.
`#[rustc_default_body_unstable]` controls the stability of default bodies in traits.
For example:
```rust
pub trait Trait {
#[rustc_default_body_unstable(feature = "feat", isssue = "none")]
fn item() {}
}
```
In order to implement `Trait` user needs to either
- implement `item` (even though it has a default implementation)
- enable `#![feature(feat)]`
This is useful in conjunction with [`#[rustc_must_implement_one_of]`](https://github.com/rust-lang/rust/pull/92164), we may want to relax requirements for a trait, for example allowing implementing either of `PartialEq::{eq, ne}`, but do so in a safe way — making implementation of only `PartialEq::ne` unstable.
r? `@Aaron1011`
cc `@nrc` (iirc you were interested in this wrt `read_buf`), `@danielhenrymantilla` (you were interested in the related `#[rustc_must_implement_one_of]`)
P.S. This is my first time working with stability attributes, so I'm not sure if I did everything right 😅
This removes some RPC when creating and emitting diagnostics, and
simplifies the bridge slightly.
After this change, there are no remaining methods which take advantage
of the support for `&mut` references to objects in the store as
arguments, meaning that support for them could technically be removed if
we wanted. The only remaining uses of immutable references into the
store are `TokenStream` and `SourceFile`.
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
This is done by having the crossbeam dependency inserted into the
proc_macro server code from the server side, to avoid adding a
dependency to proc_macro.
In addition, this introduces a -Z command-line option which will switch
rustc to run proc-macros using this cross-thread executor. With the
changes to the bridge in #98186, #98187, #98188 and #98189, the
performance of the executor should be much closer to same-thread
execution.
In local testing, the crossbeam executor was substantially more
performant than either of the two existing CrossThread strategies, so
they have been removed to keep things simple.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
This attribute allows to mark default body of a trait function as
unstable. This means that implementing the trait without implementing
the function will require enabling unstable feature.
This is useful in conjunction with `#[rustc_must_implement_one_of]`,
we may want to relax requirements for a trait, for example allowing
implementing either of `PartialEq::{eq, ne}`, but do so in a safe way
-- making implementation of only `PartialEq::ne` unstable.
Revert "Stabilize $$ in Rust 1.63.0"
This mechanically reverts commit 9edaa76adc, the one commit from #95860.
https://github.com/rust-lang/rust/issues/99035; the behavior of `$$crate` is potentially unexpected and not ready to be stabilized. https://github.com/rust-lang/rust/pull/99193 attempts to forbid `$$crate` without also destabilizing `$$` more generally.
`@rustbot` modify labels +T-compiler +T-lang +P-medium +beta-nominated +relnotes
(applying the labels I think are accurate from the issue and alternative partial revert)
cc `@Mark-Simulacrum`
This method is still only used for Literal::subspan, however the
implementation only depends on the Span component, so it is simpler and
more efficient for now to pass down only the information that is needed.
In the future, if more information about the Literal is required in the
implementation (e.g. to validate that spans line up as expected with
source text), that extra information can be added back with extra
arguments.
This builds on the symbol infrastructure built for `Ident` to replicate
the `LitKind` and `Lit` structures in rustc within the `proc_macro`
client, allowing literals to be fully created and interacted with from
the client thread. Only parsing and subspan operations still require
sync RPC.
Doing this for all unicode identifiers would require a dependency on
`unicode-normalization` and `rustc_lexer`, which is currently not
possible for `proc_macro` due to it being built concurrently with `std`
and `core`. Instead, ASCII identifiers are validated locally, and an RPC
message is used to validate unicode identifiers when needed.
String values are interned on the both the server and client when
deserializing, to avoid unnecessary copies and keep Ident cheap to copy and
move. This appears to be important for performance.
The client-side interner is based roughly on the one from rustc_span, and uses
an arena inspired by rustc_arena.
RPC messages passing symbols always include the full value. This could
potentially be optimized in the future if it is revealed to be a
performance bottleneck.
Despite now having a relevant implementaion of Display for Ident, ToString is
still specialized, as it is a hot-path for this object.
The symbol infrastructure will also be used for literals in the next
part.
