Expand `available_parallelism` docs in anticipation of cgroup quota support
The "fixed" in "fixed steady state limits" means to exclude load-dependent resource prioritization
that would calculate to 100% of capacity on an idle system and less capacity on a loaded system.
Additionally I also exclude "system load" since it would be silly to try to identify
other, perhaps higher priority, processes hogging some CPU cores that aren't explicitly excluded
by masks/quotas/whatever.
Refactor weak symbols in std::sys::unix
This makes a few changes to the weak symbol macros in `sys::unix`:
- `dlsym!` is added to keep the functionality for runtime `dlsym`
lookups, like for `__pthread_get_minstack@GLIBC_PRIVATE` that we don't
want to show up in ELF symbol tables.
- `weak!` now uses `#[linkage = "extern_weak"]` symbols, so its runtime
behavior is just a simple null check. This is also used by `syscall!`.
- On non-ELF targets (macos/ios) where that linkage is not known to
behave, `weak!` is just an alias to `dlsym!` for the old behavior.
- `raw_syscall!` is added to always call `libc::syscall` on linux and
android, for cases like `clone3` that have no known libc wrapper.
The new `weak!` linkage does mean that you'll get versioned symbols if
you build with a newer glibc, like `WEAK DEFAULT UND statx@GLIBC_2.28`.
This might seem problematic, but old non-weak symbols can tie the build
to new versions too, like `dlsym@GLIBC_2.34` from their recent library
unification. If you build with an old glibc like `dist-x86_64-linux`
does, you'll still get unversioned `WEAK DEFAULT UND statx`, which may
be resolved based on the runtime glibc.
I also found a few functions that don't need to be weak anymore:
- Android can directly use `ftruncate64`, `pread64`, and `pwrite64`, as
these were added in API 12, and our baseline is API 14.
- Linux can directly use `splice`, added way back in glibc 2.5 and
similarly old musl. Android only added it in API 21 though.
If the thread does not get the lock in the short term, yield the CPU
Reduces on [RustyHermit](https://github.com/hermitcore/rusty-hermit) the amount of wasted processor cycles
According to documentation, the listed errnos should only occur
if the `copy_file_range` call cannot be made at all, so the
assert be correct. However, since in practice file system
drivers (incl. FUSE etc.) can return any errno they want, we
should not panic here.
Fixes#91152
Mention std::io::Error::from(ErrorKind) in Error::new() docs
This conversion is not very discoverable for the cases
where an error is required without extra payload.
Simplify `for` loop desugar
Basically two intermediate bindings are inlined. I could have left one intermediate binding in place as this would simplify some diagnostic logic, but I think the difference in that regard would be negligible, so it is better to have a minimal HIR.
For checking that the pattern is irrefutable, I added a special case when the `match` is found to be non-exhaustive.
The reordering of the arms is purely stylistic. I don't *think* there are any perf implications.
```diff
match IntoIterator::into_iter($head) {
mut iter => {
$label: loop {
- let mut __next;
match Iterator::next(&mut iter) {
- Some(val) => __next = val,
None => break,
+ Some($pat) => $block,
}
- let $pat = __next;
- $block
}
}
}
```
The functions are now `unsafe` and they use `Option::unwrap_unchecked` instead of `unwrap_or_0`
`unwrap_or_0` was added in 42357d772b. I guess `unwrap_unchecked` was not available back then.
Given this example:
```rust
pub fn first_char(s: &str) -> Option<char> {
s.chars().next()
}
```
Previously, the following assembly was produced:
```asm
_ZN7example10first_char17ha056ddea6bafad1cE:
.cfi_startproc
test rsi, rsi
je .LBB0_1
movzx edx, byte ptr [rdi]
test dl, dl
js .LBB0_3
mov eax, edx
ret
.LBB0_1:
mov eax, 1114112
ret
.LBB0_3:
lea r8, [rdi + rsi]
xor eax, eax
mov r9, r8
cmp rsi, 1
je .LBB0_5
movzx eax, byte ptr [rdi + 1]
add rdi, 2
and eax, 63
mov r9, rdi
.LBB0_5:
mov ecx, edx
and ecx, 31
cmp dl, -33
jbe .LBB0_6
cmp r9, r8
je .LBB0_9
movzx esi, byte ptr [r9]
add r9, 1
and esi, 63
shl eax, 6
or eax, esi
cmp dl, -16
jb .LBB0_12
.LBB0_13:
cmp r9, r8
je .LBB0_14
movzx edx, byte ptr [r9]
and edx, 63
jmp .LBB0_16
.LBB0_6:
shl ecx, 6
or eax, ecx
ret
.LBB0_9:
xor esi, esi
mov r9, r8
shl eax, 6
or eax, esi
cmp dl, -16
jae .LBB0_13
.LBB0_12:
shl ecx, 12
or eax, ecx
ret
.LBB0_14:
xor edx, edx
.LBB0_16:
and ecx, 7
shl ecx, 18
shl eax, 6
or eax, ecx
or eax, edx
ret
```
After this change, the assembly is reduced to:
```asm
_ZN7example10first_char17h4318683472f884ccE:
.cfi_startproc
test rsi, rsi
je .LBB0_1
movzx ecx, byte ptr [rdi]
test cl, cl
js .LBB0_3
mov eax, ecx
ret
.LBB0_1:
mov eax, 1114112
ret
.LBB0_3:
mov eax, ecx
and eax, 31
movzx esi, byte ptr [rdi + 1]
and esi, 63
cmp cl, -33
jbe .LBB0_4
movzx edx, byte ptr [rdi + 2]
shl esi, 6
and edx, 63
or edx, esi
cmp cl, -16
jb .LBB0_7
movzx ecx, byte ptr [rdi + 3]
and eax, 7
shl eax, 18
shl edx, 6
and ecx, 63
or ecx, edx
or eax, ecx
ret
.LBB0_4:
shl eax, 6
or eax, esi
ret
.LBB0_7:
shl eax, 12
or eax, edx
ret
```
Adds IEEE 754-2019 minimun and maximum functions for f32/f64
IEEE 754-2019 removed the `minNum` (`min` in Rust) and `maxNum` (`max` in Rust) operations in favor of the newly created `minimum` and `maximum` operations due to their [non-associativity](https://grouper.ieee.org/groups/msc/ANSI_IEEE-Std-754-2019/background/minNum_maxNum_Removal_Demotion_v3.pdf) that cannot be fix in a backwards compatible manner. This PR adds `fN::{minimun,maximum}` functions following the new rules.
### IEEE 754-2019 Rules
> **minimum(x, y)** is x if x < y, y if y < x, and a quiet NaN if either operand is a NaN, according to 6.2.
For this operation, −0 compares less than +0. Otherwise (i.e., when x = y and signs are the same)
it is either x or y.
> **maximum(x, y)** is x if x > y, y if y > x, and a quiet NaN if either operand is a NaN, according to 6.2.
For this operation, +0 compares greater than −0. Otherwise (i.e., when x = y and signs are the
same) it is either x or y.
"IEEE Standard for Floating-Point Arithmetic," in IEEE Std 754-2019 (Revision of IEEE 754-2008) , vol., no., pp.1-84, 22 July 2019, doi: 10.1109/IEEESTD.2019.8766229.
### Implementation
This implementation is inspired by the one in [`glibc` ](90f0ac10a7/math/s_fminimum_template.c) (it self derived from the C2X draft) expect that:
- it doesn't use `copysign` because it's not available in `core` and also because `copysign` is unnecessary (we only want to check the sign, no need to create a new float)
- it also prefer `other > self` instead of `self < other` like IEEE 754-2019 does
I originally tried to implement them [using intrinsics](1d8aa13bc3) but LLVM [error out](https://godbolt.org/z/7sMrxW49a) when trying to lower them to machine intructions, GCC doesn't yet have built-ins for them, only cranelift support them nativelly (as it doesn't support the nativelly the old sementics).
Helps with https://github.com/rust-lang/rust/issues/83984
Windows: Resolve `process::Command` program without using the current directory
Currently `std::process::Command` searches many directories for the executable to run, including the current directory. This has lead to a [CVE for `ripgrep`](https://cve.circl.lu/cve/CVE-2021-3013) but presumably other command line utilities could be similarly vulnerable if they run commands. This was [discussed on the internals forum](https://internals.rust-lang.org/t/std-command-resolve-to-avoid-security-issues-on-windows/14800). Also discussed was [which directories should be searched](https://internals.rust-lang.org/t/windows-where-should-command-new-look-for-executables/15015).
EDIT: This PR originally removed all implicit paths. They've now been added back as laid out in the rest of this comment.
## Old Search Strategy
The old search strategy is [documented here][1]. Additionally Rust adds searching the child's paths (see also #37519). So the full list of paths that were searched was:
1. The directories that are listed in the child's `PATH` environment variable.
2. The directory from which the application loaded.
3. The current directory for the parent process.
4. The 32-bit Windows system directory.
5. The 16-bit Windows system directory.
6. The Windows directory.
7. The directories that are listed in the PATH environment variable.
## New Search Strategy
The new strategy removes the current directory from the searched paths.
1. The directories that are listed in the child's PATH environment variable.
2. The directory from which the application loaded.
3. The 32-bit Windows system directory.
4. The Windows directory.
5. The directories that are listed in the parent's PATH environment variable.
Note that it also removes the 16-bit system directory, mostly because there isn't a function to get it. I do not anticipate this being an issue in modern Windows.
## Impact
Removing the current directory should fix CVE's like the one linked above. However, it's possible some Windows users of affected Rust CLI applications have come to expect the old behaviour.
This change could also affect small Windows-only script-like programs that assumed the current directory would be used. The user would need to use `.\file.exe` instead of the bare application name.
This PR could break tests, especially those that test the exact output of error messages (e.g. Cargo) as this does change the error messages is some cases.
[1]: https://docs.microsoft.com/en-us/windows/win32/api/processthreadsapi/nf-processthreadsapi-createprocessa#parameters
Makes docs for references a little less confusing
- Make clear that the `Pointer` trait is related to formatting
- Make clear that the `Pointer` trait is implemented for references (previously it was confusing to first see that it's implemented and then see it in "expect")
- Make clear that `&T` (shared reference) implements `Send` (if `T: Send + Sync`)
The "fixed" in "fixed steady state limits" means to exclude load-dependent resource prioritization
that would calculate to 100% of capacity on an idle system and less capacity on a loaded system.
Additionally I also exclude "system load" since it would be silly to try to identify
other, perhaps higher priority, processes hogging some CPU cores that aren't explicitly excluded
by masks/quotas/whatever.
std: Tweak expansion of thread-local const
This commit tweaks the expansion of `thread_local!` when combined with a
`const { ... }` value to help ensure that the rules which apply to
`const { ... }` blocks will be the same as when they're stabilized.
Previously with this invocation:
thread_local!(static NAME: Type = const { init_expr });
this would generate (on supporting platforms):
#[thread_local]
static NAME: Type = init_expr;
instead the macro now expands to:
const INIT_EXPR: Type = init_expr;
#[thread_local]
static NAME: Type = INIT_EXPR;
with the hope that because `init_expr` is defined as a `const` item then
it's not accidentally allowing more behavior than if it were put into a
`static`. For example on the stabilization issue [this example][ex] now
gives the same error both ways.
[ex]: https://github.com/rust-lang/rust/issues/84223#issuecomment-953384298
std: Get the standard library compiling for wasm64
This commit goes through and updates various `#[cfg]` as appropriate to
get the wasm64-unknown-unknown target behaving similarly to the
wasm32-unknown-unknown target. Most of this is just updating various
conditions for `target_arch = "wasm32"` to also account for `target_arch
= "wasm64"` where appropriate. This commit also lists `wasm64` as an
allow-listed architecture to not have the `restricted_std` feature
enabled, enabling experimentation with `-Z build-std` externally.
The main goal of this commit is to enable playing around with
`wasm64-unknown-unknown` externally via `-Z build-std` in a way that's
similar to the `wasm32-unknown-unknown` target. These targets are
effectively the same and only differ in their pointer size, but wasm64
is much newer and has much less ecosystem/library support so it'll still
take time to get wasm64 fully-fledged.
Rename WASI's `is_character_device` to `is_char_device`.
Rename WASI's `FileTypeExt::is_character_device` to
`FileTypeExt::is_char_device`, for consistency with the Unix
`FileTypeExt::is_char_device`.
Also, add a `FileTypeExt::is_socket` function, for consistency with the
Unix `FileTypeExt::is_socket` function.
r? `@alexcrichton`
Stabilize `const_raw_ptr_deref` for `*const T`
This stabilizes dereferencing immutable raw pointers in const contexts.
It does not stabilize `*mut T` dereferencing. This is behind the
same feature gate as mutable references.
closes https://github.com/rust-lang/rust/issues/51911
pub use core::simd;
A portable abstraction over SIMD has been a major pursuit in recent years for several programming languages. In Rust, `std::arch` offers explicit SIMD acceleration via compiler intrinsics, but it does so at the cost of having to individually maintain each and every single such API, and is almost completely `unsafe` to use. `core::simd` offers safe abstractions that are resolved to the appropriate SIMD instructions by LLVM during compilation, including scalar instructions if that is all that is available.
`core::simd` is enabled by the `#![portable_simd]` nightly feature tracked in https://github.com/rust-lang/rust/issues/86656 and is introduced here by pulling in the https://github.com/rust-lang/portable-simd repository as a subtree. We built the repository out-of-tree to allow faster compilation and a stochastic test suite backed by the proptest crate to verify that different targets, features, and optimizations produce the same result, so that using this library does not introduce any surprises. As these tests are technically non-deterministic, and thus can introduce overly interesting Heisenbugs if included in the rustc CI, they are visible in the commit history of the subtree but do nothing here. Some tests **are** introduced via the documentation, but these use deterministic asserts.
There are multiple unsolved problems with the library at the current moment, including a want for better documentation, technical issues with LLVM scalarizing and lowering to libm, room for improvement for the APIs, and so far I have not added the necessary plumbing for allowing the more experimental or libm-dependent APIs to be used. However, I thought it would be prudent to open this for review in its current condition, as it is both usable and it is likely I am going to learn something else needs to be fixed when bors tries this out.
The major types are
- `core::simd::Simd<T, N>`
- `core::simd::Mask<T, N>`
There is also the `LaneCount` struct, which, together with the SimdElement and SupportedLaneCount traits, limit the implementation's maximum support to vectors we know will actually compile and provide supporting logic for bitmasks. I'm hoping to simplify at least some of these out of the way as the compiler and library evolve.
This enables programmers to use a safe alternative to the current
`extern "platform-intrinsics"` API for writing portable SIMD code.
This is `#![feature(portable_simd)]` as tracked in #86656
This makes a few changes to the weak symbol macros in `sys::unix`:
- `dlsym!` is added to keep the functionality for runtime `dlsym`
lookups, like for `__pthread_get_minstack@GLIBC_PRIVATE` that we don't
want to show up in ELF symbol tables.
- `weak!` now uses `#[linkage = "extern_weak"]` symbols, so its runtime
behavior is just a simple null check. This is also used by `syscall!`.
- On non-ELF targets (macos/ios) where that linkage is not known to
behave, `weak!` is just an alias to `dlsym!` for the old behavior.
- `raw_syscall!` is added to always call `libc::syscall` on linux and
android, for cases like `clone3` that have no known libc wrapper.
The new `weak!` linkage does mean that you'll get versioned symbols if
you build with a newer glibc, like `WEAK DEFAULT UND statx@GLIBC_2.28`.
This might seem problematic, but old non-weak symbols can tie the build
to new versions too, like `dlsym@GLIBC_2.34` from their recent library
unification. If you build with an old glibc like `dist-x86_64-linux`
does, you'll still get unversioned `WEAK DEFAULT UND statx`, which may
be resolved based on the runtime glibc.
I also found a few functions that don't need to be weak anymore:
- Android can directly use `ftruncate64`, `pread64`, and `pwrite64`, as
these were added in API 12, and our baseline is API 14.
- Linux can directly use `splice`, added way back in glibc 2.5 and
similarly old musl. Android only added it in API 21 though.
Rename WASI's `FileTypeExt::is_character_device` to
`FileTypeExt::is_char_device`, for consistency with the Unix
`FileTypeExt::is_char_device`.
Also, add a `FileTypeExt::is_socket` function, for consistency with the
Unix `FileTypeExt::is_socket` function.
As discussed here
https://github.com/rust-lang/rust/pull/88300#issuecomment-936097710
I felt this was the best place to put this (rather than next to
ExitStatusExt). After all, it's a property of the ExitStatus type on
Unix.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
As discussed here
https://github.com/rust-lang/rust/pull/88300#issuecomment-936085371
exit is (conventionally) a library function, with _exit being the
actual system call.
I have checked the other references and they say "if the process
terminated by calling `exti`". I think despite the slight
imprecision (strictly, it should read iff ... `_exit`), this is
clearer. Anyone who knows about the distinction between `exit` and
`_exit` will not be confused.
`_exit` is the correct traditional name for the system call, despite
Linux calling it `exit_group` or `exit`:
https://www.freebsd.org/cgi/man.cgi?query=_exit&sektion=2&n=1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Fix assertion failures in `OwnedHandle` with `windows_subsystem`.
As discussed in #88576, raw handle values in Windows can be null, such
as in `windows_subsystem` mode, or when consoles are detached from a
process. So, don't use `NonNull` to hold them, don't assert that they're
not null, and remove `OwnedHandle`'s `repr(transparent)`. Introduce a
new `HandleOrNull` type, similar to `HandleOrInvalid`, to cover the FFI
use case.
r? `@joshtriplett`
Only use `clone3` when needed for pidfd
In #89522 we learned that `clone3` is interacting poorly with Gentoo's
`sandbox` tool. We only need that for the unstable pidfd extensions, so
otherwise avoid that and use a normal `fork`.
This is a re-application of beta #89924, now that we're aware that we need
more than just a temporary release fix. I also reverted 12fbabd27f, as
that was just fallout from using `clone3` instead of `fork`.
r? `@Mark-Simulacrum`
cc `@joshtriplett`
This commit tweaks the expansion of `thread_local!` when combined with a
`const { ... }` value to help ensure that the rules which apply to
`const { ... }` blocks will be the same as when they're stabilized.
Previously with this invocation:
thread_local!(static NAME: Type = const { init_expr });
this would generate (on supporting platforms):
#[thread_local]
static NAME: Type = init_expr;
instead the macro now expands to:
const INIT_EXPR: Type = init_expr;
#[thread_local]
static NAME: Type = INIT_EXPR;
with the hope that because `init_expr` is defined as a `const` item then
it's not accidentally allowing more behavior than if it were put into a
`static`. For example on the stabilization issue [this example][ex] now
gives the same error both ways.
[ex]: https://github.com/rust-lang/rust/issues/84223#issuecomment-953384298
