Currently, we parse macros at the end of a block
(e.g. `fn foo() { my_macro!() }`) as expressions, rather than
statements. This means that a macro invoked in this position
cannot expand to items or semicolon-terminated expressions.
In the future, we might want to start parsing these kinds of macros
as statements. This would make expansion more 'token-based'
(i.e. macro expansion behaves (almost) as if you just textually
replaced the macro invocation with its output). However,
this is a breaking change (see PR #78991), so it will require
further discussion.
Since the current behavior will not be changing any time soon,
we need to address the interaction with the
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint. Since we are parsing
the result of macro expansion as an expression, we will emit a lint
if there's a trailing semicolon in the macro output. However, this
results in a somewhat confusing message for users, since it visually
looks like there should be no problem with having a semicolon
at the end of a block
(e.g. `fn foo() { my_macro!() }` => `fn foo() { produced_expr; }`)
To help reduce confusion, this commit adds a note explaining
that the macro is being interpreted as an expression. Additionally,
we suggest adding a semicolon after the macro *invocation* - this
will cause us to parse the macro call as a statement. We do *not*
use a structured suggestion for this, since the user may actually
want to remove the semicolon from the macro definition (allowing
the block to evaluate to the expression produced by the macro).
Warn on inert attributes used on bang macro invocation
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
These attributes are currently discarded.
This may change in the future (see #63221), but for now,
placing inert attributes on a macro invocation does nothing,
so we should warn users about it.
Technically, it's possible for there to be attribute macro
on the same macro invocation (or at a higher scope), which
inspects the inert attribute. For example:
```rust
#[look_for_inline_attr]
#[inline]
my_macro!()
#[look_for_nested_inline]
mod foo { #[inline] my_macro!() }
```
However, this would be a very strange thing to do.
Anyone running into this can manually suppress the warning.
Make `--force-warns` a normal lint level option
Now that `ForceWarn` is a lint level, there's no reason `--force-warns` should be treated differently from other options that set lint levels. This merges the `ForceWarn` handling in with the other lint level command line options. It also unifies all of the relevant selection logic in `compiler/rustc_lint/src/levels.rs`, rather than having some of it weirdly elsewhere.
Fixes#86958, which arose from the special-cased handling of `ForceWarn` having had an error in it.
Compute a better `lint_node_id` during expansion
When we need to emit a lint at a macro invocation, we currently use the
`NodeId` of its parent definition (e.g. the enclosing function). This
means that any `#[allow]` / `#[deny]` attributes placed 'closer' to the
macro (e.g. on an enclosing block or statement) will have no effect.
This commit computes a better `lint_node_id` in `InvocationCollector`.
When we visit/flat_map an AST node, we assign it a `NodeId` (earlier
than we normally would), and store than `NodeId` in current
`ExpansionData`. When we collect a macro invocation, the current
`lint_node_id` gets cloned along with our `ExpansionData`, allowing it
to be used if we need to emit a lint later on.
This improves the handling of `#[allow]` / `#[deny]` for
`SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` and some `asm!`-related lints.
The 'legacy derive helpers' lint retains its current behavior
(I've inlined the now-removed `lint_node_id` function), since
there isn't an `ExpansionData` readily available.
Based on the conversation in #86747.
Explanation
-----------
A trait object bound of the form `dyn Drop` is most likely misleading
and not what the programmer intended.
`Drop` bounds do not actually indicate whether a type can be trivially
dropped or not, because a composite type containing `Drop` types does
not necessarily implement `Drop` itself. Naïvely, one might be tempted
to write a deferred drop system, to pull cleaning up memory out of a
latency-sensitive code path, using `dyn Drop` trait objects. However,
this breaks down e.g. when `T` is `String`, which does not implement
`Drop`, but should probably be accepted.
To write a trait object bound that accepts anything, use a placeholder
trait with a blanket implementation.
```rust
trait Placeholder {}
impl<T> Placeholder for T {}
fn foo(_x: Box<dyn Placeholder>) {}
```
Fix internal `default_hash_types` lint to use resolved path
I run into false positives now and then (mostly in Clippy) when I want to name some util after HashMap.
Remove `missing_docs` lint on private 2.0 macros
798baebde1/compiler/rustc_lint/src/builtin.rs (L573-L584)
This code is the source of #57569. The problem is subtle, so let me point it out. This code makes the mistake of assuming that all of the macros in `krate.exported_macros` are exported.
...Yeah. For some historical reason, all `macro` macros are marked as exported, regardless of whether they actually are, which is dreadfully confusing. It would be more accurate to say that `exported_macros` currently contains only macros that have paths.
This PR renames `exported_macros` to `importable_macros`, since these macros can be imported with `use` while others cannot. It also fixes the code above to no longer lint on private `macro` macros, since the `missing_docs` lint should only appear on exported items.
Fixes#57569.
Support lint tool names in rustc command line options
When rustc is running without a lint tool such as clippy enabled, options for lints such as `clippy::foo` are meant to be ignored. This was already working for those specified by attrs, such as `#![allow(clippy::foo)]`, but this did not work for command line arguments like `-A clippy::foo`. This PR fixes that issue.
Note that we discovered this issue while discussing https://github.com/rust-lang/cargo/issues/5034.
Fixes#86628.
This change merges `check_lint_and_tool_name` into `check_lint_name` in
order to avoid having two very similar functions.
Also adds the `.stderr` file back for the test case, since apparently
it is still needed.
Only include lint in future_incompatible lint group if not an edition lint
A follow up to #86330 - this only includes lints annotated with `FutureIncompatibleInfo` in the `future_incompatibile` lint group if the future compatibility is not tied to an edition.
We probably want to rename `FutureIncompatibleInfo` to something else since this type is now used to indicate future breakages of all kinds (even those that happen in editions). I'd prefer to do that in a separate PR though.
r? `@nikomatsakis`
Don't make `rustc_insignificant_dtor` feature gate
This isn't a feature gate, it's an attribute that is feature gated behind the `rustc_attrs` attribute. Closes#85680.
Turn non_fmt_panic into a future_incompatible edition lint.
This turns the `non_fmt_panic` lint into a future_incompatible edition lint, so it becomes part of the `rust_2021_compatibility` group. See https://github.com/rust-lang/rust/issues/85894.
This lint produces both warnings about semantical changes (e.g. `panic!("{{")`) and things that will become hard errors (e.g. `panic!("{")`). So I added a `explain_reason: false` that supresses the default "this will become a hard error" or "the semantics will change" message, and instead added a note depending on the situation. (cc `@rylev)`
r? `@nikomatsakis`
This prevents mistakes where the feature is in the list of incomplete
features but not actually a feature by making the incompleteness a part
of the declaration.
Reserve prefixed identifiers and literals (RFC 3101)
This PR denies any identifiers immediately followed by one of three tokens `"`, `'` or `#`, which is stricter than the requirements of RFC 3101 but may be necessary according to the discussion at [Zulip].
[Zulip]: https://rust-lang.zulipchat.com/#narrow/stream/268952-edition-2021/topic/reserved.20prefixes/near/238470099
The tracking issue #84599 says we'll add a feature gate named `reserved_prefixes`, but I don't think I can do this because it is impossible for the lexer to know whether a feature is enabled or not. I guess determining the behavior by the edition information should be enough.
Fixes#84599
Remove `doc(include)`
This nightly feature is redundant now that `extended_key_value_attributes` is stable (https://github.com/rust-lang/rust/pull/83366). `@rust-lang/rustdoc` not sure if you think this needs FCP; there was already an FCP in #82539, but technically it was for deprecating, not removing the feature altogether.
This should not be merged before #83366.
cc `@petrochenkov`
Support for force-warns
Implements https://github.com/rust-lang/rust/issues/85512.
This PR adds a new command line option `force-warns` which will force the provided lints to warn even if they are allowed by some other mechanism such as `#![allow(warnings)]`.
Some remaining issues:
* https://github.com/rust-lang/rust/issues/85512 mentions that `force-warns` should also be capable of taking lint groups instead of individual lints. This is not implemented.
* If a lint has a higher warning level than `warn`, this will cause that lint to warn instead. We probably want to allow the lint to error if it is set to a higher lint and is not allowed somewhere else.
* One test is currently ignored because it's not working - when a deny-by-default lint is allowed, it does not currently warn under `force-warns`. I'm not sure why, but I wanted to get this in before the weekend.
r? `@nikomatsakis`
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
Use pattern matching instead of checking lengths explicitly
This piece of code checks that there are exaclty two variants, one having
exactly one field, the other having exactly zero fields. If any of these
conditions is violated, it returns `None`. Otherwise it assigns that one
field's ty to `field_ty`.
Instead of fiddling with indices and length checks explicitly, use pattern
matching to simplify this.
`@rustbot` modify labels +C-cleanup +T-compiler
This piece of code checks that there are exaclty two variants, one having
exactly one field, the other having exactly zero fields. If any of these
conditions is violated, it returns `None`. Otherwise it assigns that one
field's ty to `field_ty`.
Instead of fiddling with indices and length checks explicitly, use pattern
matching to simplify this.
Remove CrateNum parameter for queries that only work on local crate
The pervasive `CrateNum` parameter is a remnant of the multi-crate rustc idea.
Using `()` as query key in those cases avoids having to worry about the validity of the query key.
This PR implements span quoting, allowing proc-macros to produce spans
pointing *into their own crate*. This is used by the unstable
`proc_macro::quote!` macro, allowing us to get error messages like this:
```
error[E0412]: cannot find type `MissingType` in this scope
--> $DIR/auxiliary/span-from-proc-macro.rs:37:20
|
LL | pub fn error_from_attribute(_args: TokenStream, _input: TokenStream) -> TokenStream {
| ----------------------------------------------------------------------------------- in this expansion of procedural macro `#[error_from_attribute]`
...
LL | field: MissingType
| ^^^^^^^^^^^ not found in this scope
|
::: $DIR/span-from-proc-macro.rs:8:1
|
LL | #[error_from_attribute]
| ----------------------- in this macro invocation
```
Here, `MissingType` occurs inside the implementation of the proc-macro
`#[error_from_attribute]`. Previosuly, this would always result in a
span pointing at `#[error_from_attribute]`
This will make many proc-macro-related error message much more useful -
when a proc-macro generates code containing an error, users will get an
error message pointing directly at that code (within the macro
definition), instead of always getting a span pointing at the macro
invocation site.
This is implemented as follows:
* When a proc-macro crate is being *compiled*, it causes the `quote!`
macro to get run. This saves all of the sapns in the input to `quote!`
into the metadata of *the proc-macro-crate* (which we are currently
compiling). The `quote!` macro then expands to a call to
`proc_macro::Span::recover_proc_macro_span(id)`, where `id` is an
opaque identifier for the span in the crate metadata.
* When the same proc-macro crate is *run* (e.g. it is loaded from disk
and invoked by some consumer crate), the call to
`proc_macro::Span::recover_proc_macro_span` causes us to load the span
from the proc-macro crate's metadata. The proc-macro then produces a
`TokenStream` containing a `Span` pointing into the proc-macro crate
itself.
The recursive nature of 'quote!' can be difficult to understand at
first. The file `src/test/ui/proc-macro/quote-debug.stdout` shows
the output of the `quote!` macro, which should make this eaier to
understand.
This PR also supports custom quoting spans in custom quote macros (e.g.
the `quote` crate). All span quoting goes through the
`proc_macro::quote_span` method, which can be called by a custom quote
macro to perform span quoting. An example of this usage is provided in
`src/test/ui/proc-macro/auxiliary/custom-quote.rs`
Custom quoting currently has a few limitations:
In order to quote a span, we need to generate a call to
`proc_macro::Span::recover_proc_macro_span`. However, proc-macros
support renaming the `proc_macro` crate, so we can't simply hardcode
this path. Previously, the `quote_span` method used the path
`crate::Span` - however, this only works when it is called by the
builtin `quote!` macro in the same crate. To support being called from
arbitrary crates, we need access to the name of the `proc_macro` crate
to generate a path. This PR adds an additional argument to `quote_span`
to specify the name of the `proc_macro` crate. Howver, this feels kind
of hacky, and we may want to change this before stabilizing anything
quote-related.
Additionally, using `quote_span` currently requires enabling the
`proc_macro_internals` feature. The builtin `quote!` macro
has an `#[allow_internal_unstable]` attribute, but this won't work for
custom quote implementations. This will likely require some additional
tricks to apply `allow_internal_unstable` to the span of
`proc_macro::Span::recover_proc_macro_span`.
Update BARE_TRAIT_OBJECT and ELLIPSIS_INCLUSIVE_RANGE_PATTERNS to errors in Rust 2021
This addresses https://github.com/rust-lang/rust/pull/81244 by updating two lints to errors in the Rust 2021 edition.
r? `@estebank`
Stablize `non-ascii-idents`
This is the stablization PR for RFC 2457. Currently this is waiting on fcp in [tracking issue](https://github.com/rust-lang/rust/issues/55467).
r? `@Manishearth`
add lint deref_nullptr detecting when a null ptr is dereferenced
fixes#83856
changelog: add lint that detect code like
```rust
unsafe {
&*core::ptr::null::<i32>()
};
unsafe {
addr_of!(std::ptr::null::<i32>())
};
let x: i32 = unsafe {*core::ptr::null()};
let x: i32 = unsafe {*core::ptr::null_mut()};
unsafe {*(0 as *const i32)};
unsafe {*(core::ptr::null() as *const i32)};
```
```
warning: Dereferencing a null pointer causes undefined behavior
--> src\main.rs:5:26
|
5 | let x: i32 = unsafe {*core::ptr::null()};
| ^^^^^^^^^^^^^^^^^^
| |
| a null pointer is dereferenced
| this code causes undefined behavior when executed
|
= note: `#[warn(deref_nullptr)]` on by default
```
Limitation:
It does not detect code like
```rust
const ZERO: usize = 0;
unsafe {*(ZERO as *const i32)};
```
or code where `0` is not directly a literal
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
```rust
iter::zip(
trait_ref.substs.types().skip(1),
impl_trait_ref.substs.types().skip(1),
)
// vs.
trait_ref
.substs
.types()
.skip(1)
.zip(impl_trait_ref.substs.types().skip(1))
```
This replaces the tuple-pair `IntoIterator` in #78204.
There is prior art for the utility of this in [`itertools::zip`].
[`itertools::zip`]: https://docs.rs/itertools/0.10.0/itertools/fn.zip.html
Allow registering tool lints with `register_tool`
Previously, there was no way to add a custom tool prefix, even if the tool
itself had registered a lint:
```rust
#![feature(register_tool)]
#![register_tool(xyz)]
#![warn(xyz::my_lint)]
```
```
$ rustc unknown-lint.rs --crate-type lib
error[E0710]: an unknown tool name found in scoped lint: `xyz::my_lint`
--> unknown-lint.rs:3:9
|
3 | #![warn(xyz::my_lint)]
| ^^^
```
This allows opting-in to lints from other tools using `register_tool`.
cc https://github.com/rust-lang/rust/issues/66079#issuecomment-788589193, ``@chorman0773``
r? ``@petrochenkov``
ast/hir: Rename field-related structures
I always forget what `ast::Field` and `ast::StructField` mean despite working with AST for long time, so this PR changes the naming to less confusing and more consistent.
- `StructField` -> `FieldDef` ("field definition")
- `Field` -> `ExprField` ("expression field", not "field expression")
- `FieldPat` -> `PatField` ("pattern field", not "field pattern")
Various visiting and other methods working with the fields are renamed correspondingly too.
The second commit reduces the size of `ExprKind` by boxing fields of `ExprKind::Struct` in preparation for https://github.com/rust-lang/rust/pull/80080.
Previously, there was no way to add a custom tool prefix, even if the tool
itself had registered a lint:
```
#![feature(register_tool)]
#![register_tool(xyz)]
#![warn(xyz::my_lint)]
```
```
$ rustc unknown-lint.rs --crate-type lib
error[E0710]: an unknown tool name found in scoped lint: `xyz::my_lint`
--> unknown-lint.rs:3:9
|
3 | #![warn(xyz::my_lint)]
| ^^^
```
This allows opting-in to lints from other tools using `register_tool`.
Right now, rustdoc users have an unpleasant situation: they can either
use the new tool lint names (`rustdoc::non_autolinks`) or they can use
the old names (`non_autolinks`). If they use the tool lints, they get a
hard error on stable compilers, because rustc rejects all tool names it
doesn't recognize. If they use the old name, they get a warning to
rename the lint to the new name. The only way to compile without
warnings is to add `#[allow(renamed_removed_lints)]`, which defeats the
whole point of the change: we *want* people to switch to the new name.
To avoid people silencing the lint and never migrating to the tool lint,
this avoids warning about the old name, while still allowing you to use
the new name. Once the new `rustdoc` tool name makes it to the stable
channel, we can change these lints to warn again.
This adds the new lint functions `register_alias` and `register_ignored`
- I didn't see an existing way to do this.
StructField -> FieldDef ("field definition")
Field -> ExprField ("expression field", not "field expression")
FieldPat -> PatField ("pattern field", not "field pattern")
Also rename visiting and other methods working on them.
Now that future-incompat-report support has landed in nightly Cargo, we
can start to make progress towards removing the various proc-macro
back-compat hacks that have accumulated in the compiler.
This PR introduces a new lint `proc_macro_back_compat`, which results in
a future-incompat-report entry being generated. All proc-macro
back-compat warnings will be grouped under this lint. Note that this
lint will never actually become a hard error - instead, we will remove
the special cases for various macros, which will cause older versions of
those crates to emit some other error.
I've added code to fire this lint for the `time-macros-impl` case. This
is the easiest case out of all of our current back-compat hacks - the
crate was renamed to `time-macros`, so seeing a filename with
`time-macros-impl` guarantees that an older version of the parent `time`
crate is in use.
When Cargo's future-incompat-report feature gets stabilized, affected
users will start to see future-incompat warnings when they build their
crates.
Rename `rustdoc` to `rustdoc::all`
When rustdoc lints were changed to be tool lints, the `rustdoc` group was removed, leading to spurious warnings like
```
warning: unknown lint: `rustdoc`
```
The lint group still worked when rustdoc ran, since rustdoc added the group itself.
This renames the group to `rustdoc::all` for consistency with `clippy::all` and the rest of the rustdoc lints.
Follow-up to #80527.
r? ``@Manishearth``
or-patterns: disallow in `let` bindings
~~Blocked on https://github.com/rust-lang/rust/pull/81869~~
Disallows top-level or-patterns before type ascription. We want to reserve this syntactic space for possible future generalized type ascription.
r? ``@petrochenkov``
When rustdoc lints were changed to be tool lints, the `rustdoc` group
was removed, leading to spurious warnings like
```
warning: unknown lint: `rustdoc`
```
The lint group still worked when rustdoc ran, since rustdoc added the group itself.
This renames the group to `rustdoc::all` for consistency with
`clippy::all` and the rest of the rustdoc lints.
Implement NOOP_METHOD_CALL lint
Implements the beginnings of https://github.com/rust-lang/lang-team/issues/67 - a lint for detecting noop method calls (e.g, calling `<&T as Clone>::clone()` when `T: !Clone`).
This PR does not fully realize the vision and has a few limitations that need to be addressed either before merging or in subsequent PRs:
* [ ] No UFCS support
* [ ] The warning message is pretty plain
* [ ] Doesn't work for `ToOwned`
The implementation uses [`Instance::resolve`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/ty/instance/struct.Instance.html#method.resolve) which is normally later in the compiler. It seems that there are some invariants that this function relies on that we try our best to respect. For instance, it expects substitutions to have happened, which haven't yet performed, but we check first for `needs_subst` to ensure we're dealing with a monomorphic type.
Thank you to ```@davidtwco,``` ```@Aaron1011,``` and ```@wesleywiser``` for helping me at various points through out this PR ❤️.
