We no longer require `use` and `extern crate` items to precede other items in modules thanks to [RFC #385](https://github.com/rust-lang/rfcs/pull/385), but we still require `use` and `extern crate` items to precede statements in blocks (other items can appear anywhere in a block).
I think that this is a needless distinction between imports and other items that contradicts the intent of the RFC.
This adds the basic structure for the internals documentation, and also the initial version of the "Overview".
This first section gives and overview of the compilation process. It mentions the individual phases, and gives mention to their function & links to the relevant crates in the source tree.
This is a very general overview which is meant to lead in to the next section which will cover the `driver`. That section will give more in-depth information on each of the phases & cover things like sessions and the driver API. I wanted to give a more general introduction before getting into that detail.
This adds support for the armv7 crosstool-ng toolchain for the Raspberry Pi 2.
Getting the toolchain ready:
Checkout crosstool-ng from https://github.com/crosstool-ng/crosstool-ng
Build crosstool-ng
Configure the rpi2 target with |ct-ng armv7-rpi2-linux-gnueabihf|
Build the toolchain with |ct-build| and add the path to $toolchain_install_dir/bin to your $PATH
Then, on the rust side:
configure --target=armv7-rpi2-linux-gnueabihf && make && make install
To cross compile for the rpi2,
add $rust_install_path/lib to your $LD_LIBRARY_PATH, then use
rustc --target=armv7-rpi2-linux-gnueabihf -C linker=armv7-rpi2-linux-gnueabihf-g++ hello.rs
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
r? @nikomatsakis
cc @rust-lang/compiler
Translation Item Collection
===========================
This module is responsible for discovering all items that will contribute to
to code generation of the crate. The important part here is that it not only
needs to find syntax-level items (functions, structs, etc) but also all
their monomorphized instantiations. Every non-generic, non-const function
maps to one LLVM artifact. Every generic function can produce
from zero to N artifacts, depending on the sets of type arguments it
is instantiated with.
This also applies to generic items from other crates: A generic definition
in crate X might produce monomorphizations that are compiled into crate Y.
We also have to collect these here.
The following kinds of "translation items" are handled here:
- Functions
- Methods
- Closures
- Statics
- Drop glue
The following things also result in LLVM artifacts, but are not collected
here, since we instantiate them locally on demand when needed in a given
codegen unit:
- Constants
- Vtables
- Object Shims
General Algorithm
-----------------
Let's define some terms first:
- A "translation item" is something that results in a function or global in
the LLVM IR of a codegen unit. Translation items do not stand on their
own, they can reference other translation items. For example, if function
`foo()` calls function `bar()` then the translation item for `foo()`
references the translation item for function `bar()`. In general, the
definition for translation item A referencing a translation item B is that
the LLVM artifact produced for A references the LLVM artifact produced
for B.
- Translation items and the references between them for a directed graph,
where the translation items are the nodes and references form the edges.
Let's call this graph the "translation item graph".
- The translation item graph for a program contains all translation items
that are needed in order to produce the complete LLVM IR of the program.
The purpose of the algorithm implemented in this module is to build the
translation item graph for the current crate. It runs in two phases:
1. Discover the roots of the graph by traversing the HIR of the crate.
2. Starting from the roots, find neighboring nodes by inspecting the MIR
representation of the item corresponding to a given node, until no more
new nodes are found.
The roots of the translation item graph correspond to the non-generic
syntactic items in the source code. We find them by walking the HIR of the
crate, and whenever we hit upon a function, method, or static item, we
create a translation item consisting of the items DefId and, since we only
consider non-generic items, an empty type-substitution set.
Given a translation item node, we can discover neighbors by inspecting its
MIR. We walk the MIR and any time we hit upon something that signifies a
reference to another translation item, we have found a neighbor. Since the
translation item we are currently at is always monomorphic, we also know the
concrete type arguments of its neighbors, and so all neighbors again will be
monomorphic. The specific forms a reference to a neighboring node can take
in MIR are quite diverse. Here is an overview:
The most obvious form of one translation item referencing another is a
function or method call (represented by a CALL terminator in MIR). But
calls are not the only thing that might introduce a reference between two
function translation items, and as we will see below, they are just a
specialized of the form described next, and consequently will don't get any
special treatment in the algorithm.
A function does not need to actually be called in order to be a neighbor of
another function. It suffices to just take a reference in order to introduce
an edge. Consider the following example:
```rust
fn print_val<T: Display>(x: T) {
println!("{}", x);
}
fn call_fn(f: &Fn(i32), x: i32) {
f(x);
}
fn main() {
let print_i32 = print_val::<i32>;
call_fn(&print_i32, 0);
}
```
The MIR of none of these functions will contain an explicit call to
`print_val::<i32>`. Nonetheless, in order to translate this program, we need
an instance of this function. Thus, whenever we encounter a function or
method in operand position, we treat it as a neighbor of the current
translation item. Calls are just a special case of that.
In a way, closures are a simple case. Since every closure object needs to be
constructed somewhere, we can reliably discover them by observing
`RValue::Aggregate` expressions with `AggregateKind::Closure`. This is also
true for closures inlined from other crates.
Drop glue translation items are introduced by MIR drop-statements. The
generated translation item will again have drop-glue item neighbors if the
type to be dropped contains nested values that also need to be dropped. It
might also have a function item neighbor for the explicit `Drop::drop`
implementation of its type.
A subtle way of introducing neighbor edges is by casting to a trait object.
Since the resulting fat-pointer contains a reference to a vtable, we need to
instantiate all object-save methods of the trait, as we need to store
pointers to these functions even if they never get called anywhere. This can
be seen as a special case of taking a function reference.
Since `Box` expression have special compiler support, no explicit calls to
`exchange_malloc()` and `exchange_free()` may show up in MIR, even if the
compiler will generate them. We have to observe `Rvalue::Box` expressions
and Box-typed drop-statements for that purpose.
Interaction with Cross-Crate Inlining
-------------------------------------
The binary of a crate will not only contain machine code for the items
defined in the source code of that crate. It will also contain monomorphic
instantiations of any extern generic functions and of functions marked with
The collection algorithm handles this more or less transparently. When
constructing a neighbor node for an item, the algorithm will always call
`inline::get_local_instance()` before proceeding. If no local instance can
be acquired (e.g. for a function that is just linked to) no node is created;
which is exactly what we want, since no machine code should be generated in
the current crate for such an item. On the other hand, if we can
successfully inline the function, we subsequently can just treat it like a
local item, walking it's MIR et cetera.
Eager and Lazy Collection Mode
------------------------------
Translation item collection can be performed in one of two modes:
- Lazy mode means that items will only be instantiated when actually
referenced. The goal is to produce the least amount of machine code
possible.
- Eager mode is meant to be used in conjunction with incremental compilation
where a stable set of translation items is more important than a minimal
one. Thus, eager mode will instantiate drop-glue for every drop-able type
in the crate, even of no drop call for that type exists (yet). It will
also instantiate default implementations of trait methods, something that
otherwise is only done on demand.
Open Issues
-----------
Some things are not yet fully implemented in the current version of this
module.
Since no MIR is constructed yet for initializer expressions of constants and
statics we cannot inspect these properly.
Ideally, no translation item should be generated for const fns unless there
is a call to them that cannot be evaluated at compile time. At the moment
this is not implemented however: a translation item will be produced
regardless of whether it is actually needed or not.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.png" height=40 alt="Review on Reviewable"/>](https://reviewable.io/reviews/rust-lang/rust/30900)
<!-- Reviewable:end -->
I recently wrote a blog post on contributing to the Rust compiler which
gained some interest. It was mentioned in a comment on Reddit that it
would be useful to integrate some of the information from that post to
the official contributing guide.
This is the start of my efforts to integrate what I wrote with the
official guide.
This commit adds information on the build system. It is not a complete
guide on the build system, but it should be enough to provide a good
starting place for those wishing to contribute.
Hash VecDeque in its slice parts
Use .as_slices() for a more efficient code path in VecDeque's Hash impl.
This still hashes the elements in the same order.
Before/after timing of VecDeque hashing 1024 elements of u8 and
u64 shows that the vecdeque now can match the Vec
(test_hashing_vec_of_u64 is the Vec run).
```
before
test test_hashing_u64 ... bench: 14,031 ns/iter (+/- 236) = 583 MB/s
test test_hashing_u8 ... bench: 7,887 ns/iter (+/- 65) = 129 MB/s
test test_hashing_vec_of_u64 ... bench: 6,578 ns/iter (+/- 76) = 1245 MB/s
after
running 5 tests
test test_hashing_u64 ... bench: 6,495 ns/iter (+/- 52) = 1261 MB/s
test test_hashing_u8 ... bench: 851 ns/iter (+/- 16) = 1203 MB/s
test test_hashing_vec_of_u64 ... bench: 6,499 ns/iter (+/- 59) = 1260 MB/s
```
This is a work in progress PR that potentially should fix#29084, #28308, #25385, #28288, #31011. I think this may also adresse parts of #2887.
The problem in this issues seems to be that when transcribing macro arguments, we just clone the argument Nonterminal, which still has to original spans. This leads to the unprintable spans. One solution would be to update the spans of the inserted argument to match the argument in the macro definition. So for [this testcase](https://github.com/rust-lang/rust/compare/master...fhahn:macro-ice?expand=1#diff-f7def7420c51621640707b6337726876R2) the error message would be displayed in the macro definition:
src/test/compile-fail/issue-31011.rs:4:12: 4:22 error: attempted access of field `trace` on type `&T`, but no field with that name was found
src/test/compile-fail/issue-31011.rs:4 if $ctx.trace {
Currently I've added a very simple `update_span` function, which updates the span of the outer-most expression of a `NtExpr`, but this `update_span` function should be updated to handle all Nonterminals. But I'm pretty new to the macro system and would like to check if this approach makes sense, before doing that.
This explicitly adds an option telling the linker on these platforms to make the stack and heap non-executable (should already be the case for Windows, and likely OS X).
Without this option there is some risk of accidentally losing NX protection, as the linker will not enable NX if any of the binary's constituent objects don't contain the .note.GNU-stack header.
We're not aware of any users who would want a binary with executable stack or heap, but in future this could be made possible by passing a flag to disable the protection, which would also help document the fact to the crate's users.
Edit: older discussion of previous quickfix to add a .note.GNU-stack header to libunwind's assembly:
Short term solution for issue #30824 to ensure that object files generated from assembler contain the .note.GNU-stack header.
When this header is not present in any constituent object files, the linker refrains from making the stack NX in the final executable.
Further actions:
I'll try to get this change merged in with upstream too, and then update these instructions to just compile the fixed version.
It seems a good idea to use issue #30824 or some other issue to add a test that similar security regressions can be automatically caught in future.
Use .as_slices() for a more efficient code path in VecDeque's Hash impl.
This still hashes the elements in the same order.
Before/after timing of VecDeque hashing 1024 elements of u8 and
u64 shows that the vecdeque now can match the Vec
(test_hashing_vec_of_u64 is the Vec run).
before
test test_hashing_u64 ... bench: 14,031 ns/iter (+/- 236) = 583 MB/s
test test_hashing_u8 ... bench: 7,887 ns/iter (+/- 65) = 129 MB/s
test test_hashing_vec_of_u64 ... bench: 6,578 ns/iter (+/- 76) = 1245 MB/s
after
running 5 tests
test test_hashing_u64 ... bench: 6,495 ns/iter (+/- 52) = 1261 MB/s
test test_hashing_u8 ... bench: 851 ns/iter (+/- 16) = 1203 MB/s
test test_hashing_vec_of_u64 ... bench: 6,499 ns/iter (+/- 59) = 1260 MB/s
This commit removes the `-D warnings` flag being passed through the makefiles to
all crates to instead be a crate attribute. We want these attributes always
applied for all our standard builds, and this is more amenable to Cargo-based
builds as well.
Note that all `deny(warnings)` attributes are gated with a `cfg(stage0)`
attribute currently to match the same semantics we have today
This commit implements the stabilization of the custom hasher support intended
for 1.7 but left out due to some last-minute questions that needed some
decisions. A summary of the actions done in this PR are:
Stable
* `std:#️⃣:BuildHasher`
* `BuildHasher::Hasher`
* `BuildHasher::build_hasher`
* `std:#️⃣:BuildHasherDefault`
* `HashMap::with_hasher`
* `HashMap::with_capacity_and_hasher`
* `HashSet::with_hasher`
* `HashSet::with_capacity_and_hasher`
* `std::collections::hash_map::RandomState`
* `RandomState::new`
Deprecated
* `std::collections::hash_state`
* `std::collections::hash_state::HashState` - this trait was also moved into
`std::hash` with a reexport here to ensure that we can have a blanket impl to
prevent immediate breakage on nightly. Note that this is unstable in both
location.
* `HashMap::with_hash_state` - renamed
* `HashMap::with_capacity_and_hash_state` - renamed
* `HashSet::with_hash_state` - renamed
* `HashSet::with_capacity_and_hash_state` - renamed
Closes#27713
This splits the output of panics into two lines as proposed in #15239 and adds a
note about how to get a backtrace. Because the default panic message consists of
multiple lines now, this changes the test runner's failure output to not indent
the first line anymore.
Fixes#15239 and fixes#11704.
This commit implements the stabilization of the custom hasher support intended
for 1.7 but left out due to some last-minute questions that needed some
decisions. A summary of the actions done in this PR are:
Stable
* `std:#️⃣:BuildHasher`
* `BuildHasher::Hasher`
* `BuildHasher::build_hasher`
* `std:#️⃣:BuildHasherDefault`
* `HashMap::with_hasher`
* `HashMap::with_capacity_and_hasher`
* `HashSet::with_hasher`
* `HashSet::with_capacity_and_hasher`
* `std::collections::hash_map::RandomState`
* `RandomState::new`
Deprecated
* `std::collections::hash_state`
* `std::collections::hash_state::HashState` - this trait was also moved into
`std::hash` with a reexport here to ensure that we can have a blanket impl to
prevent immediate breakage on nightly. Note that this is unstable in both
location.
* `HashMap::with_hash_state` - renamed
* `HashMap::with_capacity_and_hash_state` - renamed
* `HashSet::with_hash_state` - renamed
* `HashSet::with_capacity_and_hash_state` - renamed
Closes#27713
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
On all platforms, reading from stdin where the actual stdin isn't present should
return 0 bytes as having been read rather than the entire buffer.
On Windows, handle the case where we're inheriting stdio handles but one of them
isn't present. Currently the behavior is to fail returning an I/O error but
instead this commit corrects it to detecting this situation and propagating the
non-set handle.
Closes#31167
