std: Remove {float,f64,f32}::from_str in favor of from_str in the prelude
Like issue #9209, remove float::{from_str, from_str_radix} in favor of
the two corresponding traits. The same for modules f64 and f32.
New usage is:
from_str::<float>("1.2e34")
Like issue #9209, remove float::{from_str, from_str_radix} in favor of
the two corresponding traits. The same for modules f64 and f32.
New usage is
from_str::<float>("1.2e34")
If a static is flagged as address_insignificant, then for LLVM to actually
perform the relevant optimization it must have an internal linkage type. What
this means, though, is that the static will not be available to other crates.
Hence, if you have a generic function with an inner static, it will fail to link
when built as a library because other crates will attempt to use the inner
static externally.
This gets around the issue by inlining the static into the metadata. The same
relevant optimization is then applied separately in the external crate. What
this ends up meaning is that all statics tagged with #[address_insignificant]
will appear at most once per crate (by value), but they could appear in multiple
crates.
This should be the last blocker for using format! ...
This doesn't close any bugs as the goal is to convert the parameter to by-value, but this is a step towards being able to make guarantees about `&T` pointers (where T is Freeze) to LLVM.
In #8185 cross-crate condition handlers were fixed by ensuring that globals
didn't start appearing in different crates with different addressed. An
unfortunate side effect of that pull request is that constants weren't inlined
across crates (uint::bits is unknown to everything but libstd).
This commit fixes this inlining by using the `available_eternally` linkage
provided by LLVM. It partially reverts #8185, and then adds support for this
linkage type. The main caveat is that not all statics could be inlined into
other crates. Before this patch, all statics were considered "inlineable items",
but an unfortunate side effect of how we deal with `&static` and `&[static]`
means that these two cases cannot be inlined across crates. The translation of
constants was modified to propogate this condition of whether a constant
should be considered inlineable into other crates.
Closes#9036
also removes the unused `FastInvoke` wrapper, as it's never actually
going to be used (we can't *partially* switch to `fastcc`, and this is
only used for Rust functions)
The `noalias` attributes were being set only on function definitions,
not on all declarations. This is harmless for `noalias`, but prevented
some optimization opportunities and is *not* harmless for other
attributes like `sret` with ABI implications.
Closes#9104
In #8185 cross-crate condition handlers were fixed by ensuring that globals
didn't start appearing in different crates with different addressed. An
unfortunate side effect of that pull request is that constants weren't inlined
across crates (uint::bits is unknown to everything but libstd).
This commit fixes this inlining by using the `available_eternally` linkage
provided by LLVM. It partially reverts #8185, and then adds support for this
linkage type. The main caveat is that not all statics could be inlined into
other crates. Before this patch, all statics were considered "inlineable items",
but an unfortunate side effect of how we deal with `&static` and `&[static]`
means that these two cases cannot be inlined across crates. The translation of
constants was modified to propogate this condition of whether a constant
should be considered inlineable into other crates.
Closes#9036
While they may have the same name within various scopes, this changes static
names to use path_pretty_name to append some hash information at the end of the
symbol. We're then guaranteed that each static has a unique NodeId, so this
NodeId is as the "hash" of the pretty name.
Closes#9188
Beforehand it was assumed that the standard cdecl abi was used for all extern
fns of extern crates, but this reads the abi of the extern fn type and declares
the function in the local crate with the appropriate type.
I was trying to think of how to write a test for this, but I was just drawing up blanks :(. Are there standard functions in libc which are not of the cdecl abi? If so we could try linking to them and make sure that the cal completes successfully.
Otherwise, I manually verified that the function was declared correctly by looking at the llvm assembly.
cc #9055 (I'm not sure if this will fix that issue)
Beforehand it was assumed that the standard cdecl abi was used for all extern
fns of extern crates, but this reads the abi of the extern fn type and declares
the function in the local crate with the appropriate type.
Also fixed nasty bug caused by calling LLVMDIBuilderCreateStructType() with a null pointer where an empty array was expected (which would trigger an unintelligable assertion somewhere down the line).
While they may have the same name within various scopes, this changes static
names to use path_pretty_name to append some hash information at the end of the
symbol. We're then guaranteed that each static has a unique NodeId, so this
NodeId is as the "hash" of the pretty name.
Closes#9188
This is a series of patches to modernize option and result. The highlights are:
* rename `.unwrap_or_default(value)` and etc to `.unwrap_or(value)`
* add `.unwrap_or_default()` that uses the `Default` trait
* add `Default` implementations for vecs, HashMap, Option
* add `Option.and(T) -> Option<T>`, `Option.and_then(&fn() -> Option<T>) -> Option<T>`, `Option.or(T) -> Option<T>`, and `Option.or_else(&fn() -> Option<T>) -> Option<T>`
* add `option::ToOption`, `option::IntoOption`, `option::AsOption`, `result::ToResult`, `result::IntoResult`, `result::AsResult`, `either::ToEither`, and `either::IntoEither`, `either::AsEither`
* renamed `Option::chain*` and `Result::chain*` to `and_then` and `or_else` to avoid the eventual collision with `Iterator.chain`.
* Added a bunch of impls of `Default`
* Added a `#[deriving(Default)]` syntax extension
* Removed impls of `Zero` for `Option<T>` and vecs.
Since function pointers do not carry along the function attributes with
them in the type, this needs to be set on the call instruction itself.
Closes#9152
This is mostly for consistency, as you can now compare raw pointers in
constant expressions or without the standard library.
It also reduces the number of `ptrtoint` instructions in the IR, making
tracking down culprits of what's usually an anti-pattern easier.
This is mostly for consistency, as you can now compare raw pointers in
constant expressions or without the standard library.
It also reduces the number of `ptrtoint` instructions in the IR, making
tracking down culprits of what's usually an anti-pattern easier.
Who would have thought that namespaces are such a can of worms `:P` This is mostly because of some GDB idiosyncrasies (does not use namespace information but linkage-name attributes for displaying items contained in namespaces, also cannot handle functions lexically nested within functions), monomorphization, and information about external items only available from metadata.
This pull request tries to tackle the problem anyway:
* The `DW_AT_linkage_name` for functions is generated just to make GDB display a proper namespace-enabled function name. To this end, a pseudo-mangled name is generated, not corresponding to the real linkage name. This approach shows some success and could be extended to make GDB also show proper parameter types.
* As GDB won't accept subprogram DIEs nested within other subprogram DIEs, the `debuginfo` module now generates a *companion namespace* for each functions (iff needed). A function `fn abc()` will get a companion namespace with name `abc()`, which contains all items (modules, types, functions) declared within the functions scope. The real, proper solution, in my opinion, would be to faithfully reflect the program's lexical structure within DWARF (which allows arbitrary nesting of DIEs, afaik), but I am not sure LLVM's source level debugging implementation would like that and I am pretty sure GDB won't support this in the foreseeable future.
* Monomorphization leads to functions and companion namespaces like `somelib::some_func<int, float>()::some_other_function<bool, bool, bool>()`, which I think is the desired behaviour. There is some design space here, however. Maybe you people prefer `somelib::some_func()::some_other_function<bool, bool, bool>()` or `somelib::some_func()::some_other_function::<int, float, bool, bool, bool>()`.
The solution will work for now but there are a few things on my 'far future wish list':
* A real specification somewhere, what language constructs are mapped to what DWARF structures.
* Proper tests that directly compare the generated DWARF information to the expected results (possibly using something like [pyelftools](https://github.com/eliben/pyelftools) or llvm-dwarfdump)
* A unified implementation for crate-local and crate-external items (which would possibly involve beefing up `ast_map::path` and metadata a bit)
Any comments are welcome!
Closes#1541Closes#1542 (there might be other issues with function name prettiness, but this specific issue should be fixed)
Closes#7715 (source locations for structs and enums are now read correctly from the AST)
This way syntax extensions can generate unsafe blocks without worrying about
them generating unnecessary unsafe warnings. Perhaps a special keyword could be
added to be used in macros, but I don't think that's the best solution.
r? anyone
Remove some trivial Visitor structs, using their non-trivial Contexts as the Visitor implementation instead.
Removed a little bit of `@boxing` as well.
Part of ongoing work on #7081.
Ensures that each AST node has a unique id. Fixes numerous bugs in macro expansion and deriving. Add two
representative tests.
Fixes#7971Fixes#6304Fixes#8367Fixes#8754Fixes#8852Fixes#2543Fixes#7654
has a unique id. Fixes numerous bugs in macro expansion and deriving. Add two
representative tests.
Fixes#7971Fixes#6304Fixes#8367Fixes#8754Fixes#8852Fixes#2543Fixes#7654
Visit the free functions of std::vec and reimplement or remove some. Most prominently, remove `each_permutation` and replace with two iterators, ElementSwaps and Permutations.
Replace unzip, unzip_slice with an updated `unzip` that works with an iterator argument.
Replace each_permutation with a Permutation iterator. The new permutation iterator is more efficient since it uses an algorithm that produces permutations in an order where each is only one element swap apart, including swapping back to the original state with one swap at the end.
Unify the seldomly used functions `build`, `build_sized`, `build_sized_opt` into just one function `build`.
Remove `equal_sizes`
These functions have very few users since they are mostly replaced by
iterator-based constructions.
Convert a few remaining users in-tree, and reduce the number of
functions by basically renaming build_sized_opt to build, and removing
the other two. This for both the vec and the at_vec versions.
The basic construct x.len() == y.len() is just as simple.
This function used to be a precondition (not sure about the
terminology), so it had to be a function. This is not relevant any more.
Also redefine all of the standard logging macros to use more rust code instead
of custom LLVM translation code. This makes them a bit easier to understand, but
also more flexibile for future types of logging.
Additionally, this commit removes the LogType language item in preparation for
changing how logging is performed.
The trait will keep the `Iterator` naming, but a more concise module
name makes using the free functions less verbose. The module will define
iterables in addition to iterators, as it deals with iteration in
general.
This removes another large chunk of this odd 'clownshoes' identifier showing up
in symbol names. These all originated from external crates because the encoded
items were encoded independently of the paths calculated in ast_map. The
encoding of these paths now uses the helper function in ast_map to calculate the
"pretty name" for an impl block.
Unfortunately there is still no information about generics in the symbol name,
but it's certainly vastly better than before
hash::__extensions__::write::_version::v0.8
becomes
hash::Writer$SipState::write::hversion::v0.8
This also fixes bugs in which lots of methods would show up as `meth_XXX`, they
now only show up as `meth` and throw some extra characters onto the version
string.
This removes another large chunk of this odd 'clownshoes' identifier showing up
in symbol names. These all originated from external crates because the encoded
items were encoded independently of the paths calculated in ast_map. The
encoding of these paths now uses the helper function in ast_map to calculate the
"pretty name" for an impl block.
Unfortunately there is still no information about generics in the symbol name,
but it's certainly vastly better than before
hash::__extensions__::write::_version::v0.8
becomes
hash::Writer$SipState::write::hversion::v0.8
This also fixes bugs in which lots of methods would show up as `meth_XXX`, they
now only show up as `meth` and throw some extra characters onto the version
string.
Also redefine all of the standard logging macros to use more rust code instead
of custom LLVM translation code. This makes them a bit easier to understand, but
also more flexibile for future types of logging.
Additionally, this commit removes the LogType language item in preparation for
changing how logging is performed.
These commits fix bugs related to identically named statics in functions of implementations in various situations. The commit messages have most of the information about what bugs are being fixed and why.
As a bonus, while I was messing around with name mangling, I improved the backtraces we'll get in gdb by removing `__extensions__` for the trait/type being implemented and by adding the method name as well. Yay!
Remove __extensions__ from method symbols as well as the meth_XXX. The XXX is
now used to append a few characters at the end of the name of the symbol.
Closes#6602
This is currently unsound since `bool` is represented as `i8`. It will
become sound when `bool` is stored as `i8` but always used as `i1`.
However, the current behaviour will always be identical to `x & 1 != 0`,
so there's no need for it. It's also surprising, since `x != 0` is the
expected behaviour.
Closes#7311
gather_loans does not need to recurse into any items declared in the
current block. Rather than special-case `fk_item_fn` and `fk_method`,
just make the GatherLoanVisitor's visit_item method a no-op.
This indirectly implies that the example of #7740 is fixed:
fn f() {
static A: &'static char = &'A';
}
Since we do not recurse into items, we no longer encounter `&'A'`.
Significant progress on #6875, enough that I'll open new bugs and turn that into a metabug when this lands.
Description & example in the commit message.
Storing the type name in the `tydesc` aims to avoid the need to pass a type name in almost every single visitor method.
It would likely be much saner for `repr` to simply be passed the `TyDesc` corresponding to the function or just the type name, but this is good enough for now.
There are 6 new compiler recognised attributes: deprecated, experimental,
unstable, stable, frozen, locked (these levels are taken directly from
Node's "stability index"[1]). These indicate the stability of the
item to which they are attached; e.g. `#[deprecated] fn foo() { .. }`
says that `foo` is deprecated.
This comes with 3 lints for the first 3 levels (with matching names) that
will detect the use of items marked with them (the `unstable` lint
includes items with no stability attribute). The attributes can be given
a short text note that will be displayed by the lint. An example:
#[warn(unstable)]; // `allow` by default
#[deprecated="use `bar`"]
fn foo() { }
#[stable]
fn bar() { }
fn baz() { }
fn main() {
foo(); // "warning: use of deprecated item: use `bar`"
bar(); // all fine
baz(); // "warning: use of unmarked item"
}
The lints currently only check the "edges" of the AST: i.e. functions,
methods[2], structs and enum variants. Any stability attributes on modules,
enums, traits and impls are not checked.
[1]: http://nodejs.org/api/documentation.html
[2]: the method check is currently incorrect and doesn't work.
As with the previous commit, this is targeted at removing the possibility of
collisions between statics. The main use case here is when there's a
type-parametric function with an inner static that's compiled as a library.
Before this commit, any impl would generate a path item of "__extensions__".
This changes this identifier to be a "pretty name", which is either the last
element of the path of the trait implemented or the last element of the type's
path that's being implemented. That doesn't quite cut it though, so the (trait,
type) pair is hashed and again used to append information to the symbol.
Essentially, __extensions__ was removed for something nicer for debugging, and
then some more information was added to symbol name by including a hash of the
trait being implemented and type it's being implemented for. This should prevent
colliding names for inner statics in regular functions with similar names.
Whenever a generic function was encountered, only the top-level items were
recursed upon, even though the function could contain items inside blocks or
nested inside of other expressions. This fixes the existing code from traversing
just the top level items to using a Visitor to deeply recurse and find any items
which need to be translated.
This was uncovered when building code with --lib, because the encode_symbol
function would panic once it found that an item hadn't been translated.
Closes#8134
Whenever a generic function was encountered, only the top-level items were
recursed upon, even though the function could contain items inside blocks or
nested inside of other expressions. This fixes the existing code from traversing
just the top level items to using a Visitor to deeply recurse and find any items
which need to be translated.
This was uncovered when building code with --lib, because the encode_symbol
function would panic once it found that an item hadn't been translated.
Closes#8134
This removes the stacking of type parameters that occurs when invoking
trait methods, and fixes all places in the standard library that were
relying on it. It is somewhat awkward in places; I think we'll probably
want something like the `Foo::<for T>::new()` syntax.
Fixes for #8625 to prevent assigning to `&mut` in borrowed or aliasable locations. The old code was insufficient in that it failed to catch bizarre cases like `& &mut &mut`.
r? @pnkfelix
Beforehand, it was unclear whether rust was performing the "recommended set" of
optimizations provided by LLVM for code. This commit changes the way we run
passes to closely mirror that of clang, which in theory does it correctly. The
notable changes include:
* Passes are no longer explicitly added one by one. This would be difficult to
keep up with as LLVM changes and we don't guaranteed always know the best
order in which to run passes
* Passes are now managed by LLVM's PassManagerBuilder object. This is then used
to populate the various pass managers run.
* We now run both a FunctionPassManager and a module-wide PassManager. This is
what clang does, and I presume that we *may* see a speed boost from the
module-wide passes just having to do less work. I have no measured this.
* The codegen pass manager has been extracted to its own separate pass manager
to not get mixed up with the other passes
* All pass managers now include passes for target-specific data layout and
analysis passes
Some new features include:
* You can now print all passes being run with `-Z print-llvm-passes`
* When specifying passes via `--passes`, the passes are now appended to the
default list of passes instead of overwriting them.
* The output of `--passes list` is now generated by LLVM instead of maintaining
a list of passes ourselves
* Loop vectorization is turned on by default as an optimization pass and can be
disabled with `-Z no-vectorize-loops`
All of these "copies" of clang are based off their [source code](http://clang.llvm.org/doxygen/BackendUtil_8cpp_source.html) in case anyone is curious what my source is. I was hoping that this would fix#8665, but this does not help the performance issues found there. Hopefully i'll allow us to tweak passes or see what's going on to try to debug that problem.
Beforehand, it was unclear whether rust was performing the "recommended set" of
optimizations provided by LLVM for code. This commit changes the way we run
passes to closely mirror that of clang, which in theory does it correctly. The
notable changes include:
* Passes are no longer explicitly added one by one. This would be difficult to
keep up with as LLVM changes and we don't guaranteed always know the best
order in which to run passes
* Passes are now managed by LLVM's PassManagerBuilder object. This is then used
to populate the various pass managers run.
* We now run both a FunctionPassManager and a module-wide PassManager. This is
what clang does, and I presume that we *may* see a speed boost from the
module-wide passes just having to do less work. I have no measured this.
* The codegen pass manager has been extracted to its own separate pass manager
to not get mixed up with the other passes
* All pass managers now include passes for target-specific data layout and
analysis passes
Some new features include:
* You can now print all passes being run with `-Z print-llvm-passes`
* When specifying passes via `--passes`, the passes are now appended to the
default list of passes instead of overwriting them.
* The output of `--passes list` is now generated by LLVM instead of maintaining
a list of passes ourselves
* Loop vectorization is turned on by default as an optimization pass and can be
disabled with `-Z no-vectorize-loops`
This patchset enables rustc to cross-build mingw-w64 outputs.
Tested on mingw + mingw-w64 (mingw-builds, win64/seh/win32-threads/gcc-4.8.1).
I also patched llvm to support Win64 stack unwinding.
ebe22bdbce
I cross-built test/run-pass/smallest-hello-world.rs and confirmed it works.
However, I also found something went wrong if I don't have custom `#[start]` routine.
Further followup on #7081.
There still remains writeback.rs, but I want to wait to investigate that one because I've seen `make check` issues with it in the past.
This does two things: 1) stops compressing metadata, 2) stops copying the metadata section, instead holding a reference to the buffer returned by the LLVM section iterator.
Not compressing metadata requires something like 7x the storage space, but makes running tests about 9% faster. This has been a time improvement on all platforms I've tested, including windows. I considered leaving compression as an option but it doesn't seem to be worth the complexity since we don't currently have any use cases where we need to save that space.
In order to avoid copying the metadata section I had to hack up extra::ebml a bit to support unsafe buffers. We should probably move it into librustc so that it can evolve to support the compiler without worrying about having a crummy interface.
r? @graydon
Monomorphize's normalization results in a 2% decrease in non-optimized
code size for libstd, so there's a negligible cost to removing it. This
also fixes several visit glue bugs because normalize wasn't considering
the differences in visit glue between types.
Closes#8720
This PR contains some code cleanup and the fix for issue #8670.
~~I am not sure about issue #8442 (could not reproduce it). @jdm, could check after this is merged and possibly close the issue then?~~ (closed now)
Some interesting facts: With this commit, it should be possible to compile libstd with `-Zdebug-info` (it does not work yet with `-Zextra-debug-info` but we are getting there). Switching debug info on increases the compile time for libstd by about 2 seconds.
@catamorphism I get one failing test in rustpkg:
`package_script_with_default_build` says: `task <unnamed> failed at 'Couldn't copy file', /home/mw/rust/src/librustpkg/tests.rs:689`
Would you have any idea what that is about? Seems be something wrong on my machine...
Cheers,
Michael
Fixes#8670
This commit removes the "super_*" functions from
typeck::infer::combine, and adds them as default methods on the
Combine trait instead, making it possible to remove a lot of
boilerplate from the various impls of Combine.
I've been wanting to do this for over a year. In fact, it was my
original motivation for default methods!
It might be possible to tighten things up even more, but this is the
bulk of it.
For #7083.
The metadata issue with the old version is now fixed. Ready for review.
This is also not the full solution to #7083, because this is not supported yet:
```
trait Foo : Send { }
impl <T: Send> Foo for T { }
fn foo<T: Foo>(val: T, chan: std::comm::Chan<T>) {
chan.send(val);
}
```
cc @nikomatsakis
Given that bootstrapping and running the testsuite works without
exporting discriminant values as global constants, I conclude that
they're unused and can be removed.
This commit removes the "super_*" functions from
typeck::infer::combine, and adds them as default methods on the
Combine trait instead, making it possible to remove a lot of
boilerplate from the various impls of Combine.
I've been wanting to do this for over a year. In fact, it was my
original motivation for default methods!
It might be possible to tighten things up even more, but this is the
bulk of it.
The first commit message is pretty good, but whomever reviews this should probably also at least glance at the changes I made in LLVM. I basically reorganized our pending patch queue to be a bit more organized and clearer in what needs to go where. After this, our queue would be:
* Add the `no-split-stack` attribute
* Add the `fixedstacksegment` attribute
* Add split-stacks for arm android
* Add split-stacks for arm linux
* Add split stacks for mips
Then there's a patch which I added to get rust to build at all on LLVM-head, and I'm not quite sure why it's there, but nothing seems to be crashing for now! (famous last words).
Otherwise, I just updated code to reflect the changes I made in LLVM with the only major change being the advent of the new `no_split_stack` attribute. This is work towards #1226, but someone more familiar with the code should probably actually assign the attribute to the appropriate functions.
Also as a bonus, I've verified that this closes#5774
That is, there was lots more hacking than the other more-mechanical
ports Felix did.
There's also a strange pattern that I hacked in to accommodate the
Outer/Inner traversal structure of the existing code (which was
previously encoding this by untying the Y-combinator style knot of the
vtable, and then retying it but superimposing new methods that "stop
at items"). I hope either I or someone else can come back in the
future and replace this ugliness with something more natural.
Added boilerplate macro; all the OuterLint definitions are the same
(but must be abstracted over implementing struct, thus the macro).
Revised lint.rs use declarations to make ast references explicit.
Also removed unused imports.
Given that bootstrapping and running the testsuite works without
exporting discriminant values as global constants, I conclude that
they're unused and can be removed.
This requires changes to method search and to codegen. We now emit a
vtable for objects that includes methods from all supertraits.
Closes#4100.
Also, actually populate the cache for vtables, and also key it by type
so that it actually works.
When using a `do` block to call an internal iterator, if you forgot to
return a value from the body, it would tell you
error: Do-block body must return bool, but returns () here. Perhaps
you meant to write a `for`-loop?
This advice no longer applies as `for` loops are now for external
iterators. Delete this message outright and let it use the default error
message
error: mismatched types: expected `bool` but found `()`
r? @thestinger
Pointers to bound variables shouldn't be stored before checking pattern,
otherwise piped patterns can conflict with each other (issue #6338).
Closes#6338.
This pull request includes support for generic functions and self arguments in methods, and combinations thereof. This also encompasses any kind of trait methods, regular and static, with and without default implementation. The implementation is backed up by a felt ton of test cases `:)`
This is a very important step towards being able to compile larger programs with debug info, since practically any generic function caused an ICE before.
One point worth discussing is that activating debug info now automatically (and silently) sets the `no_monomorphic_collapse` flag. Otherwise debug info would show wrong type names in all but one instance of the monomorphized function.
Another thing to note is that the handling of generic types does not strictly follow the DWARF specification. That is, variables with type `T` (where `T=int`) are described as having type `int` and not as having type `T`. In other words, we are losing information whether a variable has been declared with a type parameter as its type. In practice this should not make much of difference though since the concrete type is mostly what one is interested in. I'll post an issue later so this won't be forgotten.
Also included are a number of bug fixes:
* Closes#1758
* Closes#8513
* Closes#8443
* Fixes handling of field names in tuple structs
* Fixes and re-enables test case for option-like enums that relied on undefined behavior before
* Closes#1339 (should have been closed a while ago)
Cheers,
Michael
When using a `do` block to call an internal iterator, if you forgot to
return a value from the body, it would tell you
error: Do-block body must return bool, but returns () here. Perhaps
you meant to write a `for`-loop?
This advice no longer applies as `for` loops are now for external
iterators. Delete this message outright and let it use the default error
message
error: mismatched types: expected `bool` but found `()`
Retry of PR #8471
Replace the remaining functions marked for issue #8228 with similar functions that are iterator-based.
Change `either::{lefts, rights}` to be iterator-filtering instead of returning a vector.
Replace `map_vec`, `map_vec2`, `iter_vec2` in std::result with three functions:
* `result::collect` gathers `Iterator<Result<V, U>>` to `Result<~[V], U>`
* `result::fold` folds `Iterator<Result<T, E>>` to `Result<V, E>`
* `result::fold_` folds `Iterator<Result<T, E>>` to `Result<(), E>`
Pointers to bound variables shouldn't be stored before checking pattern,
otherwise piped patterns can conflict with each other (issue #6338).
Closes#6338.
Rewriting visit.rs to operate on a borrowed `&mut V` where `<V:Visitor>`
r? @nikomatsakis
r? @pcwalton
This is the first in a planned series of incremental pull requests. (There will probably be five pull requests including this one, though they can be combined or split as necessary.)
Part of #7081. (But definitely does *not* complete it, not on its own, and not even after all five parts land; there are still a few loose ends to tie up or trim afterwards.)
The bulk of this change for this particular PR is pnkfelix@3d83010, which has the changes necessary to visit.rs to support everything else that comes later. The other commits are illustrating the standard mechanical transformation that I am applying.
One important point for nearly *all* of these pull requests: I was deliberately *not* trying to be intelligent in the transformation.
* My goal was to minimize code churn, and make the transformation as mechanical as possible.
* For example, I kept the separation between the Visitor struct (corresponding to the earlier vtable of functions that were potentially closed over local state) and the explicitly passed (and clones) visitor Env. I am certain that this is almost always unnecessary, and a later task will be to go through an meld the Env's into the Visitors as appropriate. (My original goal had been to make such melding part of this task; that's why I turned them into a (Env, vtable) tuple way back when. But I digress.)
* Also, my main goal here was to get rid of the record of `@fn`'s as described by the oldvisit.rs API. (This series gets rid of all but one such case; I'm still investigating that.) There is *still* plenty of `@`-boxing left to be removed, I'm sure, and even still some `@fn`'s too; removing all of those is not the goal here; its just to get rid of the encoded protocol of `@fn`'s in the (old)visit API.
To see where things will be going in the future (i.e., to get a sneak-preview of future pull-requests in the series), see:
* https://github.com/pnkfelix/rust/commits/fsk-visitor-vpar-defaults-step1 (that's this one)
* https://github.com/pnkfelix/rust/commits/fsk-visitor-vpar-defaults-step2
* https://github.com/pnkfelix/rust/commits/fsk-visitor-vpar-defaults-step3
* https://github.com/pnkfelix/rust/commits/fsk-visitor-vpar-defaults-step4
* https://github.com/pnkfelix/rust/commits/fsk-visitor-vpar-defaults-step5
* Note that between step 4 and step 5 there is just a single commit, but its a doozy because its the only case where my mechanical transformation did not apply, and thus more serious rewriting was necessary. See commit pnkfelix@da902b2ff3b1e0bee9fc63cf00c449cceea8abf7
If they are on the trait then it is extremely annoying to use them as
generic parameters to a function, e.g. with the iterator param on the trait
itself, if one was to pass an Extendable<int> to a function that filled it
either from a Range or a Map<VecIterator>, one needs to write something
like:
fn foo<E: Extendable<int, Range<int>> +
Extendable<int, Map<&'self int, int, VecIterator<int>>>
(e: &mut E, ...) { ... }
since using a generic, i.e. `foo<E: Extendable<int, I>, I: Iterator<int>>`
means that `foo` takes 2 type parameters, and the caller has to specify them
(which doesn't work anyway, as they'll mismatch with the iterators used in
`foo` itself).
This patch changes it to:
fn foo<E: Extendable<int>>(e: &mut E, ...) { ... }
LLVMConstStringInContext() doesn't need a null-terminated string. It
takes a length instead. Using .to_c_str() here triggers an ICE whenever
the string literal embeds a null, as in "\x00".
.with_c_str() is a replacement for the old .as_c_str(), to avoid
unnecessary boilerplate.
Replace all usages of .to_c_str().with_ref() with .with_c_str().
Alpha-renamed top-level visit_* functions to walk_*.
(Motivation: Distinguish visit action and recursive traversal.)
Abstract over `&mut self` rather than over `@mut self`.
This required some acrobatics, notably the
`impl<E> Visitor<E> for @mut Visitor<E>`
and corresponding introduction of `@mut Visitor` and some local `let
mut` bindings.
Remove oldvisit reference.
Added default implementations for all of the Visitor trait methods.
Note that both `visit_expr_post` and `visit_ty` are no-op's by
default, just like they are in `oldvisit::default_visitor`.
Refactoring: extract logic to ease swapping visit for oldvisit (hopefully).
Replace these with three functions based on iterators: collect, fold,
and fold_. The mapping part is replaced by iterator .map(), so the part
that these functions do is to accumulate the final Result<,> value.
* `result::collect` gathers `Iterator<Result<V, U>>` to `Result<~[V], U>`
* `result::fold` folds `Iterator<Result<T, E>>` to `Result<V, E>`
* `result::fold_` folds `Iterator<Result<T, E>>` to `Result<(), E>`
While looking over the code for object coercion, I realized that it wasn't quite handling freezing and reborrowing correctly. Tweak the code, adding tests for the relevant cases.
r? @pcwalton
This pull request re-implements handling of visibility scopes and source code positions in debug info. It should now be very stable and properly handle
+ variable shadowing
+ expanded code (macros and the new for-loop de-sugaring, for example)
+ variables in the middle of nested scopes
+ bindings declared in the head of match statement arms.
all of which did not work at all or did not work reliably before. Those interested in a more detailed description of the problems at hand, I kindly refer to http://michaelwoerister.github.io/2013/08/03/visibility-scopes.html
Why doesn't the `populate_scope_map()` function use `syntax::visit`?
Because it would not improve this particular AST walker (see: 69dc790849 (commitcomment-3781426))
Cheers,
Michael
Also cleanup the treatment of mutability in mem_categorization, which still
included the concept of interior mutability. At some point, we should
refactor the types to exclude the possibility of interior mutability rather
than just ignoring the mutability value in those cases.
to favor inherent methods over extension methods.
The reason to favor inherent methods is that otherwise an impl
like
impl Foo for @Foo { fn method(&self) { self.method() } }
causes infinite recursion. The current change to favor inherent methods is
rather hacky; the method resolution code is in need of a refactoring.
what amount a T* pointer must be adjusted to reach the contents
of the box. For `~T` types, this requires knowing the type `T`,
which is not known in the case of objects.
This can be applied to statics and it will indicate that LLVM will attempt to
merge the constant in .data with other statics.
I have preliminarily applied this to all of the statics generated by the new
`ifmt!` syntax extension. I compiled a file with 1000 calls to `ifmt!` and a
separate file with 1000 calls to `fmt!` to compare the sizes, and the results
were:
```
fmt 310k
ifmt (before) 529k
ifmt (after) 202k
```
This now means that ifmt! is both faster and smaller than fmt!, yay!
When there is only a single store to the ret slot that dominates the
load that gets the value for the "ret" instruction, we can elide the
ret slot and directly return the operand of the dominating store
instruction. This is the same thing that clang does, except for a
special case that doesn't seem to affect us.
Fixes#8238
When there is only a single store to the ret slot that dominates the
load that gets the value for the "ret" instruction, we can elide the
ret slot and directly return the operand of the dominating store
instruction. This is the same thing that clang does, except for a
special case that doesn't seem to affect us.
Fixes#8238
r? @graydon Also, notably, make rustpkgtest depend on the rustpkg executable (otherwise, tests that shell out to rustpgk might run when rustpkg doesn't exist).
This commit allows you to write:
extern mod x = "a/b/c";
which means rustc will search in the RUST_PATH for a package with
ID a/b/c, and bind it to the name `x` if it's found.
Incidentally, move get_relative_to from back::rpath into std::path
This can be applied to statics and it will indicate that LLVM will attempt to
merge the constant in .data with other statics.
I have preliminarily applied this to all of the statics generated by the new
`ifmt!` syntax extension. I compiled a file with 1000 calls to `ifmt!` and a
separate file with 1000 calls to `fmt!` to compare the sizes, and the results
were:
fmt 310k
ifmt (before) 529k
ifmt (after) 202k
This now means that ifmt! is both faster and smaller than fmt!, yay!
env! aborts compilation of the specified environment variable is not
defined and takes an optional second argument containing a custom
error message. option_env! creates an Option<&'static str> containing
the value of the environment variable.
There are no run-pass tests that check the behavior when the environment
variable is defined since the test framework doesn't support setting
environment variables at compile time as opposed to runtime. However,
both env! and option_env! are used inside of rustc itself, which should
act as a sufficient test.
Fixes#2248.
Code that collects fields in struct-like patterns used to ignore
wildcard patterns like `Foo{_}`. But `enter_defaults` considered
struct-like patterns as default in order to overcome this
(accoring to my understanding of situation).
However such behaviour caused code like this:
```
enum E {
Foo{f: int},
Bar
}
let e = Bar;
match e {
Foo{f: _f} => { /* do something (1) */ }
_ => { /* do something (2) */ }
}
```
consider pattern `Foo{f: _f}` as default. That caused inproper behaviour
and even segfaults while trying to destruct `Bar` as `Foo{f: _f}`.
Issues: #5625 , #5530.
This patch fixes `collect_record_or_struct_fields` to split cases of
single wildcard struct-like pattern and no struct-like pattern at all.
Former case resolved with `enter_rec_or_struct` (and not with
`enter_defaults`).
Closes#5625.
Closes#5530.
env! aborts compilation of the specified environment variable is not
defined and takes an optional second argument containing a custom
error message. option_env! creates an Option<&'static str> containing
the value of the environment variable.
There are no run-pass tests that check the behavior when the environment
variable is defined since the test framework doesn't support setting
environment variables at compile time as opposed to runtime. However,
both env! and option_env! are used inside of rustc itself, which should
act as a sufficient test.
Close#2248
According to #7887, we've decided to use the syntax of `fn map<U>(f: &fn(&T) -> U) -> U`, which passes a reference to the closure, and to `fn map_move<U>(f: &fn(T) -> U) -> U` which moves the value into the closure. This PR adds these `.map_move()` functions to `Option` and `Result`.
In addition, it has these other minor features:
* Replaces a couple uses of `option.get()`, `result.get()`, and `result.get_err()` with `option.unwrap()`, `result.unwrap()`, and `result.unwrap_err()`. (See #8268 and #8288 for a more thorough adaptation of this functionality.
* Removes `option.take_map()` and `option.take_map_default()`. These two functions can be easily written as `.take().map_move(...)`.
* Adds a better error message to `result.unwrap()` and `result.unwrap_err()`.
Code like this is fixed now:
```
fn foo(p: [u8, ..4]) {
match p {
[a, b, c, d] => {}
};
}
```
Invalid constructors are not reported as errors yet:
```
fn foo(p: [u8, ..4]) {
match p {
[_, _, _] => {} // this should be error
[_, _, _, _, _, .._] => {} // and this
_ => {}
}
}
```
Issue #8311 is partially fixed by this commit. Fixed-length arrays in
let statement are not yet allowed:
```
let [a, b, c] = [1, 2, 3]; // still fails
```
Code that collects fields in struct-like patterns used to ignore
wildcard patterns like `Foo{_}`. But `enter_defaults` considered
struct-like patterns as default in order to overcome this
(accoring to my understanding of situation).
However such behaviour caused code like this:
```
enum E {
Foo{f: int},
Bar
}
let e = Bar;
match e {
Foo{f: _f} => { /* do something (1) */ }
_ => { /* do something (2) */ }
}
```
consider pattern `Foo{f: _f}` as default. That caused inproper behaviour
and even segfaults while trying to destruct `Bar` as `Foo{f: _f}`.
Issues: #5625 , #5530.
This patch fixes `collect_record_or_struct_fields` to split cases of
single wildcard struct-like pattern and no struct-like pattern at all.
Former case resolved with `enter_rec_or_struct` (and not with
`enter_defaults`).
Closes#5625.
Closes#5530.
- Made naming schemes consistent between Option, Result and Either
- Changed Options Add implementation to work like the maybe monad (return None if any of the inputs is None)
- Removed duplicate Option::get and renamed all related functions to use the term `unwrap` instead
When strings lose their trailing null, this pattern will become dangerous:
let foo = "bar";
let foo_ptr: *u8 = &foo[0];
Instead we should use c_strs to handle this correctly.
* LLVM now has a C interface to LLVMBuildAtomicRMW
* The exception handling support for the JIT seems to have been dropped
* Various interfaces have been added or headers have changed
rvalues aren't going to be used anywhere but as the argument, so
there's no point in copying them. LLVM used to eliminate the copy
later, but why bother emitting it in the first place?