Enable verification for 1/32th of queries loaded from disk
This is a limited enabling of incremental verification for query results loaded from disk, which previously did not run without -Zincremental-verify-ich. If enabled for all queries, we see a probably unacceptable hit of ~50% in the worst case, so this pairs back the verification to a more limited set based on the hash key.
Per collected [perf results](https://github.com/rust-lang/rust/pull/84227#issuecomment-953350582), this is a regression of at most 7% on coercions opt incr-unchanged, and typically less than 0.5% on other benchmarks (largely limited to incr-unchanged). I believe this is acceptable performance to land, and we can either ratchet it up or down fairly easily.
We have no real sense of whether this will lead to a large amount of assertions in the wild, but since those assertions may lead to miscompilations today, it seems potentially warranted. We have a good bit of lead time until the next stable release, though the holiday season will also start soon; we may wish to discuss the timing of enabling this and weigh the desire to prevent (possible) miscompilations against assertions.
cc `@rust-lang/wg-incr-comp`
Revert "Add rustc lint, warning when iterating over hashmaps"
Fixes perf regressions introduced in https://github.com/rust-lang/rust/pull/90235 by temporarily reverting the relevant PR.
Build the query vtable directly.
Continuation of https://github.com/rust-lang/rust/pull/89978.
This shrinks the query interface and attempts to reduce the amount of function pointer calls.
Add support for artifact size profiling
This adds support for profiling artifact file sizes (incremental compilation artifacts and query cache to begin with).
Eventually we want to track this in perf.rlo so we can ensure that file sizes do not change dramatically on each pull request.
This relies on support in measureme: https://github.com/rust-lang/measureme/pull/169. Once that lands we can update this PR to not point to a git dependency.
This was worked on together with `@michaelwoerister.`
r? `@wesleywiser`
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
Index and hash HIR as part of lowering
Part of https://github.com/rust-lang/rust/pull/88186
~Based on https://github.com/rust-lang/rust/pull/88880 (see merge commit).~
Once HIR is lowered, it is later indexed by the `index_hir` query and hashed for `crate_hash`. This PR moves those post-processing steps to lowering itself. As a side objective, the HIR crate data structure is refactored as an `IndexVec<LocalDefId, Option<OwnerInfo<'hir>>>` where `OwnerInfo` stores all the relevant information for an HIR owner.
r? `@michaelwoerister`
cc `@petrochenkov`
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
This was already only enabled in debug_assertions builds. Generally, it seems
like most use cases that would use this could also use the -Zself-profile flag
which also tracks cache hits (in all builds), and so the extra cfg's and such
are not really necessary.
This is largely just a small cleanup though, which primarily is intended to make
other changes easier by avoiding the need to deal with this field.
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
Specify a log level in tracing instrument macro explicitly.
Additionally reduce the used log level from a default info level to a
debug level (all of those appear to be developer oriented logs, so there
should be no need to include them in release builds).
Refactor query forcing
The control flow in those functions was very complex, with several layers of continuations.
I tried to simplify the implementation, while keeping essentially the same logic.
Now, all code paths go through `try_execute_query` for the actual query execution.
Communication with the `dep_graph` and the live caches are the only difference between query getting/ensuring/forcing.
Previously, `QueryJobInfo` was composed of two parts: a `QueryInfo` and
a `QueryJob`. However, both `QueryInfo` and `QueryJob` have a `span`
field, which seem to be the same. So, the `span` was recorded twice.
Now, `QueryJobInfo` is composed of a `QueryStackFrame` (the other field
of `QueryInfo`) and a `QueryJob`. So, now, the `span` is only recorded
once.
try_execute_query is now able to centralize the path for query
get/ensure/force.
try_execute_query now takes the dep_node as a parameter, so it can
accommodate `force`. This dep_node is an Option to avoid computing it in
the `get` fast path.
try_execute_query now returns both the result and the dep_node_index to
allow the caller to handle the dep graph.
The caller is responsible for marking the dependency.
`with_taks_impl` is only called from `with_eval_always_task` and
`with_task` . The former is only used in query invocation, while the
latter is also used to start the `tcx` and to trigger codegen.
This move should not change significantly the number of calls to this
assertion.
When an incremental fingerprint mismatch occurs, we debug-print
our `DepNode` and query result. Unfortunately, the debug printing
process may cause us to run additional queries, which can result
in a re-entrant fingerprint mismatch error.
To avoid a double panic, this commit adds a thread-local variable
to detect re-entrant calls.
rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
Make `Step` trait safe to implement
This PR makes a few modifications to the `Step` trait that I believe better position it for stabilization in the short term. In particular,
1. `unsafe trait TrustedStep` is introduced, indicating that the implementation of `Step` for a given type upholds all stated invariants (which have remained unchanged). This is gated behind a new `trusted_step` feature, as stabilization is realistically blocked on min_specialization.
2. The `Step` trait is internally specialized on the `TrustedStep` trait, which avoids a serious performance regression.
3. `TrustedLen` is implemented for `T: TrustedStep` as the latter's invariants subsume the former's.
4. The `Step` trait is no longer `unsafe`, as the invariants must not be relied upon by unsafe code (unless the type implements `TrustedStep`).
5. `TrustedStep` is implemented for all types that implement `Step` in the standard library and compiler.
6. The `step_trait_ext` feature is merged into the `step_trait` feature. I was unable to find any reasoning for the features being split; the `_unchecked` methods need not necessarily be stabilized at the same time, but I think it is useful to have them under the same feature flag.
All existing implementations of `Step` will be broken, as it is not possible to `unsafe impl` a safe trait. Given this trait only exists on nightly, I feel this breakage is acceptable. The blanket `impl<T: Step> TrustedLen for T` will likely cause some minor breakage, but this should be covered by the equivalent impl for `TrustedStep`.
Hopefully these changes are sufficient to place `Step` in decent position for stabilization, which would allow user-defined types to be used with `a..b` syntax.
This means that we're no longer generating the iteration/locking code for each
invocation site of iter_results, rather just once per query.
This is a 15% win in instruction counts when compiling the rustc_query_impl crate.
Found with https://github.com/est31/warnalyzer.
Dubious changes:
- Is anyone else using rustc_apfloat? I feel weird completely deleting
x87 support.
- Maybe some of the dead code in rustc_data_structures, in case someone
wants to use it in the future?
- Don't change rustc_serialize
I plan to scrap most of the json module in the near future (see
https://github.com/rust-lang/compiler-team/issues/418) and fixing the
tests needed more work than I expected.
TODO: check if any of the comments on the deleted code should be kept.
Update to rustc-rayon 0.3.1
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t `@ammaraskar)`
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
Issue #82920 showed that the kind of bugs caught by this flag have
soundness implications.
This causes performance regressions of up to 15.2% during incremental
compilation, but this is necessary to catch miscompilations caused by
bugs in query implementations.
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t @ammaraskar)
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
Check the result cache before the DepGraph when ensuring queries
Split out of https://github.com/rust-lang/rust/pull/70951
Calling `ensure` on already forced queries is a common operation.
Looking at the results cache first is faster than checking the DepGraph for a green node.
[experiment] remove `#[inline]` from rustc_query_system::plumbing
These functions have a ton of generic parameters and are instantiated
over and over again. Hopefully this will reduce binary bloat and speed
up bootstrapping times.
r? `@cjgillot`
These functions have a ton of generic parameters and are instantiated
over and over again. Hopefully this will reduce binary bloat and speed
up bootstrapping times.
Enforce that query results implement Debug
Currently, we require that query keys implement `Debug`, but we do not do the same for query values. This can make incremental compilation bugs difficult to debug - there isn't a good place to print out the result loaded from disk.
This PR adds `Debug` bounds to several query-related functions, allowing us to debug-print the query value when an 'unstable fingerprint' error occurs. This required adding `#[derive(Debug)]` to a fairly large number of types - hopefully, this doesn't have much of an impact on compiler bootstrapping times.
Serialize dependency graph directly from DepGraph
Reduce memory usage by serializing dep graph directly from `DepGraph`,
rather than copying it into `SerializedDepGraph` and serializing that.
Reduce memory consumption by sharing the previous dependency graph's
edges with the current graph when it is known to be valid to do so. It
is known to be valid whenever we mark a node green because all of its
dependencies were green. It is *not* known to be valid when we mark a
node green because we re-executed its query and its result was the same
as in the previous compilation session. In that case, the dependency set
might have changed (we don't try to determine whether or not it changed
and whether or not we can share).
Reduce memory consumption by taking advantage of red/green algorithm
properties to share the previous dependency graph's node data with the
current graph instead of storing node data redundantly. Red nodes can
share the `DepNode`, and green nodes can share the `DepNode` and
`Fingerprint`. Edges will be shared when possible in a later change.
Register nodes that we've reused from the previous session explicitly
with `OnDiskCache`. Previously, we relied on this happening as a side
effect of accessing the nodes in the `PreviousDepGraph`. For the sake of
performance and avoiding unintended side effects, register explictily.
