Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
The scope of these refactorings is a little bit bigger than the title implies. See each commit for details.
I’m submitting this for nitpicking now (the first 4 commits), because I feel the basic idea/implementation is sound and should work. I will eventually expand this PR to cover the translator changes necessary for all this to work (+ tests), ~~and perhaps implement a dynamic dropping scheme while I’m at it as well.~~
r? @nikomatsakis
If a new cleanup is added to a cleanup scope, the cached exits for that
scope are cleared, so all previous cleanups have to be translated
again. In the worst case this means that we get N distinct landing pads
where the last one has N cleanups, then N-1 and so on.
As new cleanups are to be executed before older ones, we can instead
cache the number of already translated cleanups in addition to the
block that contains them, and then only translate new ones, if any and
then jump to the cached ones, getting away with linear growth instead.
For the crate in #31381 this reduces the compile time for an optimized
build from >20 minutes (I cancelled the build at that point) to about 11
seconds. Testing a few crates that come with rustc show compile time
improvements somewhere between 1 and 8%. The "big" winner being
rustc_platform_intrinsics which features code similar to that in #31381.
Fixes#31381
The first commit improves detection of unused imports -- it should have been part of #30325. Right now, the unused import in the changed test would not be reported.
The rest of the commits are miscellaneous, independent clean-ups in resolve that I didn't think warranted individual PRs.
r? @nrc
The structure of the old translator as well as MIR assumed that drop glue cannot possibly panic and
translated the drops accordingly. However, in presence of `Drop::drop` this assumption can be
trivially shown to be untrue. As such, the Rust code like the following would never print number 2:
```rust
struct Droppable(u32);
impl Drop for Droppable {
fn drop(&mut self) {
if self.0 == 1 { panic!("Droppable(1)") } else { println!("{}", self.0) }
}
}
fn main() {
let x = Droppable(2);
let y = Droppable(1);
}
```
While the behaviour is allowed according to the language rules (we allow drops to not run), that’s
a very counter-intuitive behaviour. We fix this in MIR by allowing `Drop` to have a target to take
on divergence and connect the drops in such a way so the leftover drops are executed when some drop
unwinds.
Note, that this commit still does not implement the translator part of changes necessary for the
grand scheme of things to fully work, so the actual observed behaviour does not change yet. Coming
soon™.
See #14875.
We used to have CallKind only because there was a requirement to have all successors in a
contiguous memory block. Now that the requirement is gone, remove the CallKind and instead just
have the necessary information inline.
Awesome!
After the truly incredible and embarrassing mess I managed to make in my last pull request, this should be a bit less messy.
Fixes#31267 - with this change, the code mentioned in the issue compiles.
Found and fixed another issue as well - constants of zero-size types, when used in ExprRepeats inside associated constants, were causing the compiler to crash at the same place as #31267. An example of this:
```
struct Bar;
const BAZ: Bar = Bar;
struct Foo([Bar; 1]);
struct Biz;
impl Biz {
const BAZ: Foo = Foo([BAZ; 1]);
}
fn main() {
let foo = Biz::BAZ;
println!("{:?}", foo);
}
```
However, I'm fairly certain that my fix for this is not as elegant as it could be. The problem seems to occur only with an associated constant of a tuple struct containing a fixed size array which is initialized using a repeat expression, and when the element to be repeated provided to the repeat expression is another constant which is of a zero-sized type. The fix works by looking for constants and associated constants which are zero-width and consequently contain no data, but for which rustc is still attempting to emit an LLVM value; it simply stops rustc from attempting to emit anything. By my logic, this should work fine since the only values that are emitted in this case (according to the comments) are for closures with side effects, and constants will never have side effects, so it's fine to simply get rid of them. It fixes the error and things compile fine with it, but I have a sneaking suspicion that it could be done in a far better manner.
r? @nikomatsakis
If a new cleanup is added to a cleanup scope, the cached exits for that
scope are cleared, so all previous cleanups have to be translated
again. In the worst case this means that we get N distinct landing pads
where the last one has N cleanups, then N-1 and so on.
As new cleanups are to be executed before older ones, we can instead
cache the number of already translated cleanups in addition to the
block that contains them, and then only translate new ones, if any and
then jump to the cached ones, getting away with linear growth instead.
For the crate in #31381 this reduces the compile time for an optimized
build from >20 minutes (I cancelled the build at that point) to about 11
seconds. Testing a few crates that come with rustc show compile time
improvements somewhere between 1 and 8%. The "big" winner being
rustc_platform_intrinsics which features code similar to that in #31381.
Fixes#31381
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
This mirrors the behavior of `clang-cl.exe` by adding a `CodeView` global
variable when emitting debug information. This should in turn help stack traces
that are generated when code is compiled with debuginfo enabled.
Closes#28133
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
Currently the `mipsel-unknown-linux-gnu` target doesn't actually set the
`target_arch` value to `mipsel` but it rather uses `mips`. Alternatively the
`powerpc64le` target does indeed set the `target_arch` as `powerpc64le`,
causing a bit of inconsistency between theset two.
As these are just the same instance of one instruction set, let's use
`target_endian` to switch between them and only set the `target_arch` as one
value. This should cut down on the number of `#[cfg]` annotations necessary and
all around be a little more ergonomic.
This mirrors the behavior of `clang-cl.exe` by adding a `CodeView` global
variable when emitting debug information. This should in turn help stack traces
that are generated when code is compiled with debuginfo enabled.
Closes#28133
These commits perform a few high-level changes with the goal of enabling i686 MSVC unwinding:
* LLVM is upgraded to pick up the new exception handling instructions and intrinsics for MSVC. This puts us somewhere along the 3.8 branch, but we should still be compatible with LLVM 3.7 for non-MSVC targets.
* All unwinding for MSVC targets (both 32 and 64-bit) are implemented in terms of this new LLVM support. I would like to also extend this to Windows GNU targets to drop the runtime dependencies we have on MinGW, but I'd like to land this first.
* Some tests were fixed up for i686 MSVC here and there where necessary. The full test suite should be passing now for that target.
In terms of landing this I plan to have this go through first, then verify that i686 MSVC works, then I'll enable `make check` on the bots for that target instead of just `make` as-is today.
Closes#25869
This commit transitions the compiler to using the new exception handling
instructions in LLVM for implementing unwinding for MSVC. This affects both 32
and 64-bit MSVC as they're both now using SEH-based strategies. In terms of
standard library support, lots more details about how SEH unwinding is
implemented can be found in the commits.
In terms of trans, this change necessitated a few modifications:
* Branches were added to detect when the old landingpad instruction is used or
the new cleanuppad instruction is used to `trans::cleanup`.
* The return value from `cleanuppad` is not stored in an `alloca` (because it
cannot be).
* Each block in trans now has an `Option<LandingPad>` instead of `is_lpad: bool`
for indicating whether it's in a landing pad or not. The new exception
handling intrinsics require that on MSVC each `call` inside of a landing pad
is annotated with which landing pad that it's in. This change to the basic
block means that whenever a `call` or `invoke` instruction is generated we
know whether to annotate it as part of a cleanuppad or not.
* Lots of modifications were made to the instruction builders to construct the
new instructions as well as pass the tagging information for the call/invoke
instructions.
* The translation of the `try` intrinsics for MSVC has been overhauled to use
the new `catchpad` instruction. The filter function is now also a
rustc-generated function instead of a purely libstd-defined function. The
libstd definition still exists, it just has a stable ABI across architectures
and leaves some of the really weird implementation details to the compiler
(e.g. the `localescape` and `localrecover` intrinsics).
This brings some routine upgrades to the bundled LLVM that we're using, the most
notable of which is a bug fix to the way we handle range asserts when loading
the discriminant of an enum. This fix ended up being very similar to f9d4149c
where we basically can't have a range assert when loading a discriminant due to
filling drop, and appropriate flags were added to communicate this to
`trans::adt`.
When cross compiling for a target that has a larger usize type than the
host system, we use a truncated value to mark data as dropped,
eventually leading to drop calls on already dropped data. To properly
handle this, the drop pattern needs to be of type u64.
Since C_integral truncates its given value to the requested size anyway,
we can also drop the function that chose between the u32 and u64 values,
and always use the u64 constant.
Fixes#31139
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
r? @nikomatsakis
cc @rust-lang/compiler
Translation Item Collection
===========================
This module is responsible for discovering all items that will contribute to
to code generation of the crate. The important part here is that it not only
needs to find syntax-level items (functions, structs, etc) but also all
their monomorphized instantiations. Every non-generic, non-const function
maps to one LLVM artifact. Every generic function can produce
from zero to N artifacts, depending on the sets of type arguments it
is instantiated with.
This also applies to generic items from other crates: A generic definition
in crate X might produce monomorphizations that are compiled into crate Y.
We also have to collect these here.
The following kinds of "translation items" are handled here:
- Functions
- Methods
- Closures
- Statics
- Drop glue
The following things also result in LLVM artifacts, but are not collected
here, since we instantiate them locally on demand when needed in a given
codegen unit:
- Constants
- Vtables
- Object Shims
General Algorithm
-----------------
Let's define some terms first:
- A "translation item" is something that results in a function or global in
the LLVM IR of a codegen unit. Translation items do not stand on their
own, they can reference other translation items. For example, if function
`foo()` calls function `bar()` then the translation item for `foo()`
references the translation item for function `bar()`. In general, the
definition for translation item A referencing a translation item B is that
the LLVM artifact produced for A references the LLVM artifact produced
for B.
- Translation items and the references between them for a directed graph,
where the translation items are the nodes and references form the edges.
Let's call this graph the "translation item graph".
- The translation item graph for a program contains all translation items
that are needed in order to produce the complete LLVM IR of the program.
The purpose of the algorithm implemented in this module is to build the
translation item graph for the current crate. It runs in two phases:
1. Discover the roots of the graph by traversing the HIR of the crate.
2. Starting from the roots, find neighboring nodes by inspecting the MIR
representation of the item corresponding to a given node, until no more
new nodes are found.
The roots of the translation item graph correspond to the non-generic
syntactic items in the source code. We find them by walking the HIR of the
crate, and whenever we hit upon a function, method, or static item, we
create a translation item consisting of the items DefId and, since we only
consider non-generic items, an empty type-substitution set.
Given a translation item node, we can discover neighbors by inspecting its
MIR. We walk the MIR and any time we hit upon something that signifies a
reference to another translation item, we have found a neighbor. Since the
translation item we are currently at is always monomorphic, we also know the
concrete type arguments of its neighbors, and so all neighbors again will be
monomorphic. The specific forms a reference to a neighboring node can take
in MIR are quite diverse. Here is an overview:
The most obvious form of one translation item referencing another is a
function or method call (represented by a CALL terminator in MIR). But
calls are not the only thing that might introduce a reference between two
function translation items, and as we will see below, they are just a
specialized of the form described next, and consequently will don't get any
special treatment in the algorithm.
A function does not need to actually be called in order to be a neighbor of
another function. It suffices to just take a reference in order to introduce
an edge. Consider the following example:
```rust
fn print_val<T: Display>(x: T) {
println!("{}", x);
}
fn call_fn(f: &Fn(i32), x: i32) {
f(x);
}
fn main() {
let print_i32 = print_val::<i32>;
call_fn(&print_i32, 0);
}
```
The MIR of none of these functions will contain an explicit call to
`print_val::<i32>`. Nonetheless, in order to translate this program, we need
an instance of this function. Thus, whenever we encounter a function or
method in operand position, we treat it as a neighbor of the current
translation item. Calls are just a special case of that.
In a way, closures are a simple case. Since every closure object needs to be
constructed somewhere, we can reliably discover them by observing
`RValue::Aggregate` expressions with `AggregateKind::Closure`. This is also
true for closures inlined from other crates.
Drop glue translation items are introduced by MIR drop-statements. The
generated translation item will again have drop-glue item neighbors if the
type to be dropped contains nested values that also need to be dropped. It
might also have a function item neighbor for the explicit `Drop::drop`
implementation of its type.
A subtle way of introducing neighbor edges is by casting to a trait object.
Since the resulting fat-pointer contains a reference to a vtable, we need to
instantiate all object-save methods of the trait, as we need to store
pointers to these functions even if they never get called anywhere. This can
be seen as a special case of taking a function reference.
Since `Box` expression have special compiler support, no explicit calls to
`exchange_malloc()` and `exchange_free()` may show up in MIR, even if the
compiler will generate them. We have to observe `Rvalue::Box` expressions
and Box-typed drop-statements for that purpose.
Interaction with Cross-Crate Inlining
-------------------------------------
The binary of a crate will not only contain machine code for the items
defined in the source code of that crate. It will also contain monomorphic
instantiations of any extern generic functions and of functions marked with
The collection algorithm handles this more or less transparently. When
constructing a neighbor node for an item, the algorithm will always call
`inline::get_local_instance()` before proceeding. If no local instance can
be acquired (e.g. for a function that is just linked to) no node is created;
which is exactly what we want, since no machine code should be generated in
the current crate for such an item. On the other hand, if we can
successfully inline the function, we subsequently can just treat it like a
local item, walking it's MIR et cetera.
Eager and Lazy Collection Mode
------------------------------
Translation item collection can be performed in one of two modes:
- Lazy mode means that items will only be instantiated when actually
referenced. The goal is to produce the least amount of machine code
possible.
- Eager mode is meant to be used in conjunction with incremental compilation
where a stable set of translation items is more important than a minimal
one. Thus, eager mode will instantiate drop-glue for every drop-able type
in the crate, even of no drop call for that type exists (yet). It will
also instantiate default implementations of trait methods, something that
otherwise is only done on demand.
Open Issues
-----------
Some things are not yet fully implemented in the current version of this
module.
Since no MIR is constructed yet for initializer expressions of constants and
statics we cannot inspect these properly.
Ideally, no translation item should be generated for const fns unless there
is a call to them that cannot be evaluated at compile time. At the moment
this is not implemented however: a translation item will be produced
regardless of whether it is actually needed or not.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.png" height=40 alt="Review on Reviewable"/>](https://reviewable.io/reviews/rust-lang/rust/30900)
<!-- Reviewable:end -->
This commit removes the `-D warnings` flag being passed through the makefiles to
all crates to instead be a crate attribute. We want these attributes always
applied for all our standard builds, and this is more amenable to Cargo-based
builds as well.
Note that all `deny(warnings)` attributes are gated with a `cfg(stage0)`
attribute currently to match the same semantics we have today
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
LLVM was upgraded to a new version in this commit:
f9d4149c29
which was part of this pull request:
https://github.com/rust-lang/rust/issues/26025
Consider the following two lines from that commit:
f9d4149c29 (diff-a3b24dbe2ea7c1981f9ac79f9745f40aL462)f9d4149c29 (diff-a3b24dbe2ea7c1981f9ac79f9745f40aL469)
The purpose of these lines is to register LLVM passes. Prior to the that
commit, the passes being handled were assumed to be ModulePasses (a
specific type of LLVM pass) since they were being added to a ModulePass
manager. After that commit, both lines were refactored (presumably in an
attempt to DRY out the code), but the ModulePasses were changed to be
registered to a FunctionPass manager. This change resulted in
ModulePasses being run, but a Function object was being passed as a
parameter to the pass instead of a Module, which resulted in
segmentation faults.
In this commit, I changed relevant sections of the code to check the
type of the passes being added and register them to the appropriate pass
manager.
Closes https://github.com/rust-lang/rust/issues/31067
This commit removes the `-D warnings` flag being passed through the makefiles to
all crates to instead be a crate attribute. We want these attributes always
applied for all our standard builds, and this is more amenable to Cargo-based
builds as well.
Note that all `deny(warnings)` attributes are gated with a `cfg(stage0)`
attribute currently to match the same semantics we have today
This is a fix for #30741. It simplifies dep-graph tracking for trait matching. I was experimenting with having a greater resolution here, but decided to pare back to just have one dep node for "trait resolutions on trait `Foo`", which means that adding an impl to the trait `Foo` will invalidate all fns that had to do any trait matching at all on `Foo`. This seems like a reasonable starting place.
Independently, I realized I had neglected to record a dependency from trans on typeck -- this is obviously needed, since trans consumes a bunch of data structures that typeck produces (but which are not currently individually tracked) -- and because trans assumes that typeck has been done. Eventually those are going to go away and be replaced with MIR, which will be tracked, so this edge would presumably be derived automatically then, but it's an obvious enough thing to want for now.
r? @arielb1
cc @michaelwoerister -- this might indirectly fix the problem you observed with the trans cache, though it'd be nice to try and craft an independent test case for that.
