Now that procedural macros can be implemented outside of the compiler,
it's more important to have a reasonable API to work with. Here are the
basic changes:
* Rename SyntaxExpanderTTTrait to MacroExpander, SyntaxExpanderTT to
BasicMacroExpander, etc. I think "procedural macro" is the right
term for these now, right? The other option would be SynExtExpander
or something like that.
* Stop passing the SyntaxContext to extensions. This was only ever used
by macro_rules, which doesn't even use it anymore. I can't think of
a context in which an external extension would need it, and removal
allows the API to be significantly simpler - no more
SyntaxExpanderTTItemExpanderWithoutContext wrappers to worry about.
The following are renamed:
* `min_value` => `MIN`
* `max_value` => `MAX`
* `bits` => `BITS`
* `bytes` => `BYTES`
All tests pass, except for `run-pass/phase-syntax-link-does-resolve.rs`. I doubt that failure is related, though.
Fixes#10010.
The race here happened when a port had its deschedule in select() canceled, but
the other chan had already been dropped. This meant that the DISCONNECTED case
was hit in abort_selection, but the to_wake cell hadn't been emptied yet (this
was done after aborting), causing an assert in abort_selection to trip.
To fix this, the to_wake cell is just emptied before abort_selection is called
(we know that we're the owner of it already).
They all have to go into a single module at the moment unfortunately.
Ideally, the logging macros would live in std::logging, condition! would
live in std::condition, format! in std::fmt, etc. However, this
introduces cyclic dependencies between those modules and the macros they
use which the current expansion system can't deal with. We may be able
to get around this by changing the expansion phase to a two-pass system
but that's for a later PR.
Closes#2247
cc #11763
By default, the compiler and libraries are all still built with rpaths, but this
can be opted out of with --disable-rpath to ./configure or --no-rpath to rustc.
Closes#5219
The race here happened when a port had its deschedule in select() canceled, but
the other chan had already been dropped. This meant that the DISCONNECTED case
was hit in abort_selection, but the to_wake cell hadn't been emptied yet (this
was done after aborting), causing an assert in abort_selection to trip.
To fix this, the to_wake cell is just emptied before abort_selection is called
(we know that we're the owner of it already).
By default, the compiler and libraries are all still built with rpaths, but this
can be opted out of with --disable-rpath to ./configure or --no-rpath to rustc.
cc #5219
This change adds two improvements to docs searching functionality.
First, search results will immediately be displayed when a ?search=searchterm
query string parameter is provided to any docs url.
Second, search results are now inserted into the browser history, allowing for
easier navigation between search results and docs pages.
They all have to go into a single module at the moment unfortunately.
Ideally, the logging macros would live in std::logging, condition! would
live in std::condition, format! in std::fmt, etc. However, this
introduces cyclic dependencies between those modules and the macros they
use which the current expansion system can't deal with. We may be able
to get around this by changing the expansion phase to a two-pass system
but that's for a later PR.
Closes#2247
cc #11763
Before this commit, rustc looked in `dirname $0`/../lib for libraries
but that doesn't work when rustc is invoked through a symlink.
This commit makes rustc look in `dirname $(readlink $0)`/../lib, i.e.
it first canonicalizes the symlink before walking up the directory tree.
Fixes#3632.
On my Gentoo Linux machine, the c-dynamic-dylib test is failing, because libcfoo can't be found. bar has a correct rpath for finding libfoo.so, but libfoo.so's rpath doesn't contain the right entries for finding libcfoo.
Below is the test failure on my machine. This test pass with this commit:
```
maketest: c-dynamic-dylib
----- /storage/home/achin/devel/rust/src/test/run-make/c-dynamic-dylib/ --------------------
------ stdout ---------------------------------------------
make[1]: Entering directory `/storage/home/achin/devel/rust/src/test/run-make/c-dynamic-dylib'
gcc -Wall -Werror -g -fPIC -m64 -L /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib -c -o /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib/libcfoo.o cfoo.c
gcc -Wall -Werror -g -fPIC -m64 -L /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib -o /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib/libcfoo.so /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib/libcfoo.o -shared
/storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/stage2/bin/rustc --out-dir /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib -L /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib foo.rs
/storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/stage2/bin/rustc --out-dir /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib -L /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib bar.rs
/storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib/bar
rm /storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib/libcfoo.o
make[1]: Leaving directory `/storage/home/achin/devel/rust/src/test/run-make/c-dynamic-dylib'
------ stderr ---------------------------------------------
/storage/home/achin/devel/rust/x86_64-unknown-linux-gnu/test/run-make/c-dynamic-dylib/bar: error while loading shared libraries: libcfoo.so: cannot open shared object file: No such file or directory
make[1]: *** [all] Error 127
------ ---------------------------------------------
```
The old method of serializing the AST gives totally bogus spans if the
expansion of an imported macro causes compilation errors. The best
solution seems to be to serialize the actual textual macro definition
and load it the same way the std-macros are. I'm not totally confident
that getting the source from the CodeMap will always do the right thing,
but it seems to work in simple cases.
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
```rust
fn main() {
match true {
true => {
let mut x = 1;
let y = &x;
let z = &mut x;
}
false => ()
}
}
test.rs:6:21: 6:27 error: cannot borrow `x` as mutable because it is already borrowed as immutable
test.rs:6 let z = &mut x;
^~~~~~
test.rs:5:21: 5:23 note: previous borrow of `x` occurs here; the immutable borrow prevents subsequent moves or mutable borrows of `x` until the borrow ends
test.rs:5 let y = &x;
^~
test.rs:7:10: 7:10 note: previous borrow ends here
test.rs:3 true => {
test.rs:4 let mut x = 1;
test.rs:5 let y = &x;
test.rs:6 let z = &mut x;
test.rs:7 }
^
```
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:4:2: 4:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
test.rs:2 let t1 = &mut *t0;
test.rs:3 let p: &int = &**t0;
test.rs:4 }
^
```
For the "previous borrow ends here" note, if the span is too long (has too many lines), then only the first and last lines are printed, and the middle is replaced with dot dot dot:
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:7:2: 7:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
...
test.rs:7 }
^
```
(Sidenote: the `span_end_note` currently also has issue #11715)
Renamed the ```invert()``` function in ```iter.rs``` to ```flip()```, from #10632
Also renamed the ```Invert<T>``` type to ```Flip<T>```.
Some related code comments changed. Documentation that I could find has
been updated, and all the instances I could locate where the
function/type were called have been updated as well.
This is my first contribution to Rust! Apologies in advance if I've snarfed the
PR process, I'm not used to rebase.
I initially had issues with the ```codegen``` section of the tests failing, however
the ```make check``` process is not reporting any failures at this time. I think
that was a local env issue more than me facerolling my changes. :)
This patchset consists of three parts:
- rustpkg doesn't guess crate version if it is not given by user.
- `rustpkg::version::Version` is replaced by `Option<~str>`.
It removes some semantic versioning portions which is not currently used.
(cc #8405 and #11396)
`rustpkg::crate_id::CrateId` is also replaced by `syntax::crateid::CrateId`.
- rustpkg now computes hash to find crate, instead of manual filename parse.
cc @metajack
This change adds two improvements to docs searching functionality.
First, search results will immediately be displayed when a ?search=searchterm
query string parameter is provided to any docs url.
Second, search results are now inserted into the browser history, allowing for
easier navigation between search results and docs pages.
Renamed the invert() function in iter.rs to flip().
Also renamed the Invert<T> type to Flip<T>.
Some related code comments changed. Documentation that I could find has
been updated, and all the instances I could locate where the
function/type were called have been updated as well.
