post-unboxed-closure-conversion. This requires a fair amount of
annoying coercions because all the `map` etc types are defined
generically over the `F`, so the automatic coercions don't propagate;
this is compounded by the need to use `let` and not `as` due to
stage0. That said, this pattern is to a large extent temporary and
unusual.
This commit starts out by consolidating all `str` extension traits into one
`StrExt` trait to be included in the prelude. This means that
`UnicodeStrPrelude`, `StrPrelude`, and `StrAllocating` have all been merged into
one `StrExt` exported by the standard library. Some functionality is currently
duplicated with the `StrExt` present in libcore.
This commit also currently avoids any methods which require any form of pattern
to operate. These functions will be stabilized via a separate RFC.
Next, stability of methods and structures are as follows:
Stable
* from_utf8_unchecked
* CowString - after moving to std::string
* StrExt::as_bytes
* StrExt::as_ptr
* StrExt::bytes/Bytes - also made a struct instead of a typedef
* StrExt::char_indices/CharIndices - CharOffsets was renamed
* StrExt::chars/Chars
* StrExt::is_empty
* StrExt::len
* StrExt::lines/Lines
* StrExt::lines_any/LinesAny
* StrExt::slice_unchecked
* StrExt::trim
* StrExt::trim_left
* StrExt::trim_right
* StrExt::words/Words - also made a struct instead of a typedef
Unstable
* from_utf8 - the error type was changed to a `Result`, but the error type has
yet to prove itself
* from_c_str - this function will be handled by the c_str RFC
* FromStr - this trait will have an associated error type eventually
* StrExt::escape_default - needs iterators at least, unsure if it should make
the cut
* StrExt::escape_unicode - needs iterators at least, unsure if it should make
the cut
* StrExt::slice_chars - this function has yet to prove itself
* StrExt::slice_shift_char - awaiting conventions about slicing and shifting
* StrExt::graphemes/Graphemes - this functionality may only be in libunicode
* StrExt::grapheme_indices/GraphemeIndices - this functionality may only be in
libunicode
* StrExt::width - this functionality may only be in libunicode
* StrExt::utf16_units - this functionality may only be in libunicode
* StrExt::nfd_chars - this functionality may only be in libunicode
* StrExt::nfkd_chars - this functionality may only be in libunicode
* StrExt::nfc_chars - this functionality may only be in libunicode
* StrExt::nfkc_chars - this functionality may only be in libunicode
* StrExt::is_char_boundary - naming is uncertain with container conventions
* StrExt::char_range_at - naming is uncertain with container conventions
* StrExt::char_range_at_reverse - naming is uncertain with container conventions
* StrExt::char_at - naming is uncertain with container conventions
* StrExt::char_at_reverse - naming is uncertain with container conventions
* StrVector::concat - this functionality may be replaced with iterators, but
it's not certain at this time
* StrVector::connect - as with concat, may be deprecated in favor of iterators
Deprecated
* StrAllocating and UnicodeStrPrelude have been merged into StrExit
* eq_slice - compiler implementation detail
* from_str - use the inherent parse() method
* is_utf8 - call from_utf8 instead
* replace - call the method instead
* truncate_utf16_at_nul - this is an implementation detail of windows and does
not need to be exposed.
* utf8_char_width - moved to libunicode
* utf16_items - moved to libunicode
* is_utf16 - moved to libunicode
* Utf16Items - moved to libunicode
* Utf16Item - moved to libunicode
* Utf16Encoder - moved to libunicode
* AnyLines - renamed to LinesAny and made a struct
* SendStr - use CowString<'static> instead
* str::raw - all functionality is deprecated
* StrExt::into_string - call to_string() instead
* StrExt::repeat - use iterators instead
* StrExt::char_len - use .chars().count() instead
* StrExt::is_alphanumeric - use .chars().all(..)
* StrExt::is_whitespace - use .chars().all(..)
Pending deprecation -- while slicing syntax is being worked out, these methods
are all #[unstable]
* Str - while currently used for generic programming, this trait will be
replaced with one of [], deref coercions, or a generic conversion trait.
* StrExt::slice - use slicing syntax instead
* StrExt::slice_to - use slicing syntax instead
* StrExt::slice_from - use slicing syntax instead
* StrExt::lev_distance - deprecated with no replacement
Awaiting stabilization due to patterns and/or matching
* StrExt::contains
* StrExt::contains_char
* StrExt::split
* StrExt::splitn
* StrExt::split_terminator
* StrExt::rsplitn
* StrExt::match_indices
* StrExt::split_str
* StrExt::starts_with
* StrExt::ends_with
* StrExt::trim_chars
* StrExt::trim_left_chars
* StrExt::trim_right_chars
* StrExt::find
* StrExt::rfind
* StrExt::find_str
* StrExt::subslice_offset
This commit collapses the various prelude traits for slices into just one trait:
* SlicePrelude/SliceAllocPrelude => SliceExt
* CloneSlicePrelude/CloneSliceAllocPrelude => CloneSliceExt
* OrdSlicePrelude/OrdSliceAllocPrelude => OrdSliceExt
* PartialEqSlicePrelude => PartialEqSliceExt
This change makes the compiler no longer infer whether types (structures
and enumerations) implement the `Copy` trait (and thus are implicitly
copyable). Rather, you must implement `Copy` yourself via `impl Copy for
MyType {}`.
A new warning has been added, `missing_copy_implementations`, to warn
you if a non-generic public type has been added that could have
implemented `Copy` but didn't.
For convenience, you may *temporarily* opt out of this behavior by using
`#![feature(opt_out_copy)]`. Note though that this feature gate will never be
accepted and will be removed by the time that 1.0 is released, so you should
transition your code away from using it.
This breaks code like:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
Change this code to:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
impl Copy for Point2D {}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
This is the backwards-incompatible part of #13231.
Part of RFC #3.
[breaking-change]
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::* and Result::*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
'Numeric' is the proper name of the unicode character class,
and this frees up the word 'digit' for ascii use in libcore.
Since I'm going to rename `Char::is_digit_radix` to
`is_digit`, I am not leaving a deprecated method in place,
because that would just cause name clashes, as both
`Char` and `UnicodeChar` are in the prelude.
[breaking-change]
This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
This commit renames a number of extension traits for slices and string
slices, now that they have been refactored for DST. In many cases,
multiple extension traits could now be consolidated. Further
consolidation will be possible with generalized where clauses.
The renamings are consistent with the [new `-Prelude`
suffix](https://github.com/rust-lang/rfcs/pull/344). There are probably
a few more candidates for being renamed this way, but that is left for
API stabilization of the relevant modules.
Because this renames traits, it is a:
[breaking-change]
However, I do not expect any code that currently uses the standard
library to actually break.
Closes#17917
Unicode characters and strings.
Use `\u0080`-`\u00ff` instead. ASCII/byte literals are unaffected.
This PR introduces a new function, `escape_default`, into the ASCII
module. This was necessary for the pretty printer to continue to
function.
RFC #326.
Closes#18062.
[breaking-change]
As part of the collections reform RFC, this commit removes all collections
traits in favor of inherent methods on collections themselves. All methods
should continue to be available on all collections.
This is a breaking change with all of the collections traits being removed and
no longer being in the prelude. In order to update old code you should move the
trait implementations to inherent implementations directly on the type itself.
Note that some traits had default methods which will also need to be implemented
to maintain backwards compatibility.
[breaking-change]
cc #18424
This PR changes the signature of several methods from `foo(self, ...)` to
`foo(&self, ...)`/`foo(&mut self, ...)`, but there is no breakage of the usage
of these methods due to the autoref nature of `method.call()`s. This PR also
removes the lifetime parameter from some traits (`Trait<'a>` -> `Trait`). These
changes break any use of the extension traits for generic programming, but
those traits are not meant to be used for generic programming in the first
place. In the whole rust distribution there was only one misuse of a extension
trait as a bound, which got corrected (the bound was unnecessary and got
removed) as part of this PR.
[breaking-change]
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
Closes#17718
[rfc]: https://github.com/rust-lang/rfcs/pull/246
The tables in libunicode are far too large to want to be inlined into any other
program, so these tables are all going to remain `static`. For them to be legal,
they cannot reference one another by value, but instead use references now.
This commit also modifies the src/etc/unicode.py script to generate the right
tables.
This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
These are like the existing bsearch methods but if the search fails,
it returns the next insertion point.
The new `binary_search` returns a `BinarySearchResult` that is either
`Found` or `NotFound`. For convenience, the `found` and `not_found`
methods convert to `Option`, ala `Result`.
Deprecate bsearch and bsearch_elem.
ImmutableVector -> ImmutableSlice
ImmutableEqVector -> ImmutableEqSlice
ImmutableOrdVector -> ImmutableOrdSlice
MutableVector -> MutableSlice
MutableVectorAllocating -> MutableSliceAllocating
MutableCloneableVector -> MutableCloneableSlice
MutableOrdVector -> MutableOrdSlice
These are all in the prelude so most code will not break.
[breaking-change]
