A spec like `#[cfg(foo(bar))]` is not allowed as an attribute. This
makes the same spec be rejected by the compiler if passed in as a
`--cfg` argument.
Fixes#31495
This commit is an implementation of the new compiler flags required by [RFC
1361][rfc]. This specifically adds a new `cfg` option to the `--print` flag to
the compiler. This new directive will print the defined `#[cfg]` directives by
the compiler for the target in question.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/1361-cargo-cfg-dependencies.md
A spec like `#[cfg(foo(bar))]` is not allowed as an attribute. This
makes the same spec be rejected by the compiler if passed in as a
`--cfg` argument.
Fixes#31495
The goal is that the compiler will pass `Result`s around rather than using abort_if_errors. To preserve behaviour we currently abort at the top level. I've removed all other aborts from the driver, but haven't touched any of the nested aborts.
This commit removes the `-D warnings` flag being passed through the makefiles to
all crates to instead be a crate attribute. We want these attributes always
applied for all our standard builds, and this is more amenable to Cargo-based
builds as well.
Note that all `deny(warnings)` attributes are gated with a `cfg(stage0)`
attribute currently to match the same semantics we have today
this makes sure the checks run before typeck (which might use the constant or const
function to calculate an array length) and gives prettier error messages in case of for
loops and such (since they aren't expanded yet).
fixes#30887
r? @pnkfelix
this makes sure the checks run before typeck (which might use the constant or const
function to calculate an array length) and gives prettier error messages in case of for
loops and such (since they aren't expanded yet).
[breaking-change]
`OptLevel` variants are no longer `pub use`ed by rust::session::config. If you are using these variants, you must change your code to prefix the variant name with `OptLevel`.
This commit is the standard API stabilization commit for the 1.6 release cycle.
The list of issues and APIs below have all been through their cycle-long FCP and
the libs team decisions are listed below
Stabilized APIs
* `Read::read_exact`
* `ErrorKind::UnexpectedEof` (renamed from `UnexpectedEOF`)
* libcore -- this was a bit of a nuanced stabilization, the crate itself is now
marked as `#[stable]` and the methods appearing via traits for primitives like
`char` and `str` are now also marked as stable. Note that the extension traits
themeselves are marked as unstable as they're imported via the prelude. The
`try!` macro was also moved from the standard library into libcore to have the
same interface. Otherwise the functions all have copied stability from the
standard library now.
* The `#![no_std]` attribute
* `fs::DirBuilder`
* `fs::DirBuilder::new`
* `fs::DirBuilder::recursive`
* `fs::DirBuilder::create`
* `os::unix::fs::DirBuilderExt`
* `os::unix::fs::DirBuilderExt::mode`
* `vec::Drain`
* `vec::Vec::drain`
* `string::Drain`
* `string::String::drain`
* `vec_deque::Drain`
* `vec_deque::VecDeque::drain`
* `collections::hash_map::Drain`
* `collections::hash_map::HashMap::drain`
* `collections::hash_set::Drain`
* `collections::hash_set::HashSet::drain`
* `collections::binary_heap::Drain`
* `collections::binary_heap::BinaryHeap::drain`
* `Vec::extend_from_slice` (renamed from `push_all`)
* `Mutex::get_mut`
* `Mutex::into_inner`
* `RwLock::get_mut`
* `RwLock::into_inner`
* `Iterator::min_by_key` (renamed from `min_by`)
* `Iterator::max_by_key` (renamed from `max_by`)
Deprecated APIs
* `ErrorKind::UnexpectedEOF` (renamed to `UnexpectedEof`)
* `OsString::from_bytes`
* `OsStr::to_cstring`
* `OsStr::to_bytes`
* `fs::walk_dir` and `fs::WalkDir`
* `path::Components::peek`
* `slice::bytes::MutableByteVector`
* `slice::bytes::copy_memory`
* `Vec::push_all` (renamed to `extend_from_slice`)
* `Duration::span`
* `IpAddr`
* `SocketAddr::ip`
* `Read::tee`
* `io::Tee`
* `Write::broadcast`
* `io::Broadcast`
* `Iterator::min_by` (renamed to `min_by_key`)
* `Iterator::max_by` (renamed to `max_by_key`)
* `net::lookup_addr`
New APIs (still unstable)
* `<[T]>::sort_by_key` (added to mirror `min_by_key`)
Closes#27585Closes#27704Closes#27707Closes#27710Closes#27711Closes#27727Closes#27740Closes#27744Closes#27799Closes#27801
cc #27801 (doesn't close as `Chars` is still unstable)
Closes#28968
Currently the explain command requires full erorr codes, complete with
the leading zeros and the E at the beginning. This commit changes that,
if you don't supply a full erorr code then the error number is padded
out to the required size and the E is added to the beginning.
This means that where previously you would need to write E0001, you can
now write 0001, 001, 01 or jsut 1 to refer to the same error.
Currently the compiler supports the ability to emit multiple output types as
part of one compilation (e.g. asm, LLVM IR, bytecode, link, dep-info, etc). It
does not, however, support the ability to customize the output filename for each
of these output types. The `-o` flag is ignored if multiple emit types are
specified (and the compiler emits a warning about this).
Normally this doesn't matter too much, but in the case of `dep-info` it can lead
to a number of problems (e.g. see #28716). By allowing customization of the
output filename for each emit type we're able to solve the problems in that
issue.
This commit adds support for the `--emit` option to the compiler to look like:
rustc foo.rs --emit dep-info=.deps/foo.d,link
This indicates that the `dep-info` output type will be placed at `.deps/foo.d`
and the `link` output type will otherwise be determined via the `--out-dir` and
`-o` flags.
Closes#28716
Currently, `early_error` and `early_warn` in `librustc::session` always
use `ColorConfig::Auto`. Modify them to follow the color configuration
set by the `--color` option.
As colored output is also printed during the early stage, parsing the
`--color` option should be done as early as possible. However, there are
still some cases when the output needs to be colored before knowing the
exact color settings. In these cases, it will be defaulted to
`ColorConfig::Auto`, which is the same as before.
Fixes#27879.
This commit is an implementation of [RFC 1183][rfc] which allows swapping out
the default allocator on nightly Rust. No new stable surface area should be
added as a part of this commit.
[rfc]: https://github.com/rust-lang/rfcs/pull/1183
Two new attributes have been added to the compiler:
* `#![needs_allocator]` - this is used by liballoc (and likely only liballoc) to
indicate that it requires an allocator crate to be in scope.
* `#![allocator]` - this is a indicator that the crate is an allocator which can
satisfy the `needs_allocator` attribute above.
The ABI of the allocator crate is defined to be a set of symbols that implement
the standard Rust allocation/deallocation functions. The symbols are not
currently checked for exhaustiveness or typechecked. There are also a number of
restrictions on these crates:
* An allocator crate cannot transitively depend on a crate that is flagged as
needing an allocator (e.g. allocator crates can't depend on liballoc).
* There can only be one explicitly linked allocator in a final image.
* If no allocator is explicitly requested one will be injected on behalf of the
compiler. Binaries and Rust dylibs will use jemalloc by default where
available and staticlibs/other dylibs will use the system allocator by
default.
Two allocators are provided by the distribution by default, `alloc_system` and
`alloc_jemalloc` which operate as advertised.
Closes#27389
This commit alters the implementation of multiple codegen units slightly to be
compatible with the MSVC linker. Currently the implementation will take the N
object files created by each codegen unit and will run `ld -r` to create a new
object file which is then passed along. The MSVC linker, however, is not able to
do this operation.
The compiler will now no longer attempt to assemble object files together but
will instead just pass through all the object files as usual. This implies that
rlibs may not contain more than one object file (if the library is compiled with
more than one codegen unit) and the output of `-C save-temps` will have changed
slightly as object files with the extension `0.o` will not be renamed to `o`
unless requested otherwise.
This commit starts passing the `--whole-archive` flag (`-force_load` on OSX) to
the linker when linking rlibs into dylibs. The primary purpose of this commit is
to ensure that the linker doesn't strip out objects from an archive when
creating a dynamic library. Information on how this can go wrong can be found in
issues #14344 and #25185.
The unfortunate part about passing this flag to the linker is that we have to
preprocess the rlib to remove the metadata and compressed bytecode found within.
This means that creating a dylib will now take longer to link as we've got to
copy around the input rlibs to a temporary location, modify them, and then
invoke the linker. This isn't done for executables, however, so the "hello
world" compile time is not affected.
This fix was instigated because of the previous commit where rlibs may not
contain multiple object files instead of one due to codegen units being greater
than one. That change prevented the main distribution from being compiled with
more than one codegen-unit and this commit fixes that.
Closes#14344Closes#25185
