These blocks were required because previously we could only insert
instructions at the end of blocks, but we wanted to have all allocas in
one place, so they can be collapse. But now we have "direct" access the
the LLVM IR builder and can position it freely. This allows us to use
the same trick that clang uses, which means that we insert a dummy
"marker" instruction to identify the spot at which we want to insert
allocas. We can then later position the IR builder at that spot and
insert the alloca instruction, without any dedicated block.
The block for loading the closure environment can now also go away,
because the function context now provides the toplevel block, and the
translation of the loading happens first, so that's good enough.
Makes the LLVM IR a bit more readable, saving a bunch of branches in the
unoptimized code, which benefits unoptimized builds.
Currently, the helper functions in the "build" module can only append
at the end of a block. For certain things we'll want to be able to
insert code at arbitrary locations inside a block though. Although can
we do that by directly calling the LLVM functions, that is rather ugly
and means that somethings need to be implemented twice. Once in terms
of the helper functions and once in terms of low level LLVM functions.
Instead of doing that, we should provide a Builder type that provides
low level access to the builder, and which can be used by both, the
helper functions in the "build" module, as well larger units of
abstractions that combine several LLVM instructions.
Currently, all closures have an llenv block to load values from the
captured environment, but for closure that don't actually capture
anything, that block is useless and can be skipped.
This does a number of things, but especially dramatically reduce the
number of allocations performed for operations involving attributes/
meta items:
- Converts ast::meta_item & ast::attribute and other associated enums
to CamelCase.
- Converts several standalone functions in syntax::attr into methods,
defined on two traits AttrMetaMethods & AttributeMethods. The former
is common to both MetaItem and Attribute since the latter is a thin
wrapper around the former.
- Deletes functions that are unnecessary due to iterators.
- Converts other standalone functions to use iterators and the generic
AttrMetaMethods rather than allocating a lot of new vectors (e.g. the
old code would have to allocate a new vector to use functions that
operated on &[meta_item] on &[attribute].)
- Moves the core algorithm of the #[cfg] matching to syntax::attr,
similar to find_inline_attr and find_linkage_metas.
This doesn't have much of an effect on the speed of #[cfg] stripping,
despite hugely reducing the number of allocations performed; presumably
most of the time is spent in the ast folder rather than doing attribute
checks.
Also fixes the Eq instance of MetaItem_ to correctly ignore spans, so
that `rustc --cfg 'foo(bar)'` now works.
This pull request includes various improvements:
+ Composite types (structs, tuples, boxes, etc) are now handled more cleanly by debuginfo generation. Most notably, field offsets are now extracted directly from LLVM types, as opposed to trying to reconstruct them. This leads to more stable handling of edge cases (e.g. packed structs or structs implementing drop).
+ `debuginfo.rs` in general has seen a major cleanup. This includes better formatting, more readable variable and function names, removal of dead code, and better factoring of functionality.
+ Handling of `VariantInfo` in `ty.rs` has been improved. That is, the `type VariantInfo = @VariantInfo_` typedef has been replaced with explicit uses of @VariantInfo, and the duplicated logic for creating VariantInfo instances in `ty::enum_variants()` and `typeck::check::mod::check_enum_variants()` has been unified into a single constructor function. Both function now look nicer too :)
+ Debug info generation for enum types is now mostly supported. This includes:
+ Good support for C-style enums. Both DWARF and `gdb` know how to handle them.
+ Proper description of tuple- and struct-style enum variants as unions of structs.
+ Proper handling of univariant enums without discriminator field.
+ Unfortunately `gdb` always prints all possible interpretations of a union, so debug output of enums is verbose and unintuitive. Neither `LLVM` nor `gdb` support DWARF's `DW_TAG_variant` which allows to properly describe tagged unions. Adding support for this to `LLVM` seems doable. `gdb` however is another story. In the future we might be able to use `gdb`'s Python scripting support to alleviate this problem. In agreement with @jdm this is not a high priority for now.
+ The debuginfo test suite has been extended with 14 test files including tests for packed structs (with Drop), boxed structs, boxed vecs, vec slices, c-style enums (standalone and embedded), empty enums, tuple- and struct-style enums, and various pointer types to the above.
~~What is not yet included is DI support for some enum edge-cases represented as described in `trans::adt::NullablePointer`.~~
Cheers,
Michael
PS: closes#7819, fixes#7712
This does a bunch of cleanup on the data structures for the trait system. (Unfortunately it doesn't remove `provided_method_sources`. Maybe later.)
It also changes how cross crate methods are handled, so that information about them is exported in metadata, instead of having the methods regenerated by every crate that imports an impl.
r? @nikomatsakis, maybe?
This does a number of things, but especially dramatically reduce the
number of allocations performed for operations involving attributes/
meta items:
- Converts ast::meta_item & ast::attribute and other associated enums
to CamelCase.
- Converts several standalone functions in syntax::attr into methods,
defined on two traits AttrMetaMethods & AttributeMethods. The former
is common to both MetaItem and Attribute since the latter is a thin
wrapper around the former.
- Deletes functions that are unnecessary due to iterators.
- Converts other standalone functions to use iterators and the generic
AttrMetaMethods rather than allocating a lot of new vectors (e.g. the
old code would have to allocate a new vector to use functions that
operated on &[meta_item] on &[attribute].)
- Moves the core algorithm of the #[cfg] matching to syntax::attr,
similar to find_inline_attr and find_linkage_metas.
This doesn't have much of an effect on the speed of #[cfg] stripping,
despite hugely reducing the number of allocations performed; presumably
most of the time is spent in the ast folder rather than doing attribute
checks.
Also fixes the Eq instance of MetaItem_ to correctly ignore spaces, so
that `rustc --cfg 'foo(bar)'` now works.
This is the first of a series of refactorings to get rid of the `codemap::spanned<T>` struct (see this thread for more information: https://mail.mozilla.org/pipermail/rust-dev/2013-July/004798.html).
The changes in this PR should not change any semantics, just rename `ast::blk_` to `ast::blk` and add a span field to it. 95% of the changes were of the form `block.node.id` -> `block.id`. Only some transformations in `libsyntax::fold` where not entirely trivial.
Currently, our intrinsics are generated as functions that have the
usual setup, which means an alloca, and therefore also a jump, for
those intrinsics that return an immediate value. This is especially bad
for unoptimized builds because it means that an intrinsic like
"contains_managed" that should be just "ret 0" or "ret 1" actually ends
up allocating stack space, doing a jump and a store/load sequence
before it finally returns the value.
To fix that, we need a way to stop the generic function declaration
mechanism from allocating stack space for the return value. This
implicitly also kills the jump, because the block for static allocas
isn't required anymore.
Additionally, trans_intrinsic needs to build the return itself instead
of calling finish_fn, because the latter relies on the availability of
the return value pointer.
With these changes, we get the bare minimum code required for our
intrinsics, which makes them small enough that inlining them makes the
resulting code smaller, so we can mark them as "always inline" to get
better performing unoptimized builds.
Optimized builds also benefit slightly from this change as there's less
code for LLVM to translate and the smaller intrinsics help it to make
better inlining decisions for a few code paths.
Building stage2 librustc gets ~1% faster for the optimized version and 5% for
the unoptimized version.
Most arms of the huge match contain the same code, differing only in
small details like the name of the llvm intrinsic that is to be called.
Thus the duplicated code can be factored out into a few functions that
take some parameters to handle the differences.
Whenever a lang_item is required, some relevant message is displayed, often with
a span of what triggered the usage of the lang item.
Now "hello word" is as small as:
```rust
#[no_std];
extern {
fn puts(s: *u8);
}
extern "rust-intrinsic" {
fn transmute<T, U>(t: T) -> U;
}
#[start]
fn main(_: int, _: **u8, _: *u8) -> int {
unsafe {
let (ptr, _): (*u8, uint) = transmute("Hello!");
puts(ptr);
}
return 0;
}
```
Allowing them in type signatures is a significant amount of extra work, unfortunately. This also doesn't apply to static values, which takes a different code path.
As per @pcwalton's request, `debug!(..)` is only activated when the `debug` cfg is set; that is, for `RUST_LOG=some_module=4 ./some_program` to work, it needs to be compiled with `rustc --cfg debug some_program.rs`. (Although, there is the sneaky `__debug!(..)` macro that is always active, if you *really* need it.)
It functions by making `debug!` expand to `if false { __debug!(..) }` (expanding to an `if` like this is required to make sure `debug!` statements are typechecked and to avoid unused variable warnings), and adjusting trans to skip the pointless branches in `if true ...` and `if false ...`.
The conditional expansion change also required moving the inject-std-macros step into a new pass, and makes it actually insert them at the top of the crate; this means that the cfg stripping traverses over the macros and so filters out the unused ones.
This appears to takes an unoptimised build of `librustc` from 65s to 59s; and the full bootstrap from 18m41s to 18m26s on my computer (with general background use).
`./configure --enable-debug` will enable `debug!` statements in the bootstrap build.
That is, the `b` branch in `if true { a } else { b }` will not be
trans'd, and that expression will be exactly the same as `a`. This
means that, for example, macros conditionally expanding to `if false
{ .. }` (like debug!) will not waste time in LLVM (or trans).
An alloca in an unreachable block would shortcircuit with Undef, but with type
`Type`, rather than type `*Type` (i.e. a plain value, not a pointer) but it is
expected to return a pointer into the stack, leading to confusion and LLVM
asserts later.
Similarly, attaching the range metadata to a Load in an unreachable block
makes LLVM unhappy, since the Load returns Undef.
Fixes#7344.
If the TLS key is 0-sized, then the linux linker is apparently smart enough to
put everything at the same pointer. OSX on the other hand, will reserve some
space for all of them. To get around this, the TLS key now actuall consumes
space to ensure that it gets a unique pointer
We used to have concrete types in glue functions, but the way we used
to implement that broke inlining of those functions. To fix that, we
converted all glue to just take an i8* and always casted to that type.
The problem with the old implementation was that we made a wrong
assumption about the glue functions, taking it for granted that they
always take an i8*, because that's the function type expected by the
TyDesc fields. Therefore, we always ended up with some kind of cast.
But actually, we can initially have the glue with concrete types and
only cast the functions to the generic type once we actually emit the
TyDesc data.
That means that for glue calls that can be statically resolved, we don't
need any casts, unless the glue uses a simplified type. In that case we
cast the argument. And for glue calls that are resolved at runtime, we
cast the argument to i8*, because that's what the glue function in the
TyDesc expects.
Since most of out glue calls are static, this saves a lot of bitcasts.
The size of the unoptimized librustc.ll goes down by 240k lines.
Currently, we always create a dedicated "return" basic block, but when
there's only a single predecessor for that block, it can be merged with
that predecessor. We can achieve that merge by only creating the return
block on demand, avoiding its creation when its not required.
Reduces the pre-optimization size of librustc.ll created with --passes ""
by about 90k lines which equals about 4%.
Currently, immediate values are copied into an alloca only to have an
addressable storage so that it can be used with memcpy. Obviously we
can skip the memcpy in this case.
cc #6004 and #3273
This is a rewrite of TLS to get towards not requiring `@` when using task local storage. Most of the rewrite is straightforward, although there are two caveats:
1. Changing `local_set` to not require `@` is blocked on #7673
2. The code in `local_pop` is some of the most unsafe code I've written. A second set of eyes should definitely scrutinize it...
The public-facing interface currently hasn't changed, although it will have to change because `local_data::get` cannot return `Option<T>`, nor can it return `Option<&T>` (the lifetime isn't known). This will have to be changed to be given a closure which yield `&T` (or as an Option). I didn't do this part of the api rewrite in this pull request as I figured that it could wait until when `@` is fully removed.
This also doesn't deal with the issue of using something other than functions as keys, but I'm looking into using static slices (as mentioned in the issues).
