This patch does not make many functional changes, but does a lot of restructuring towards the goals of #5527. This is the biggest patch, basically, that should enable most of the other patches in a relatively straightforward way.
Major changes:
- Do not track impls through trans, instead recompute as needed.
- Isolate trait matching code into its own module, carefully structure to distinguish various phases (selection vs confirmation vs fulfillment)
- Consider where clauses in their more general form
- Integrate checking of builtin bounds into the trait matching process, rather than doing it separately in kind.rs (important for opt-in builtin bounds)
What is not included:
- Where clauses are still not generalized. This should be a straightforward follow-up patch.
- Caching. I did not include much caching. I have plans for various kinds of caching we can do. Should be straightforward. Preliminary perf measurements suggested that this branch keeps compilation times roughly what they are.
- Method resolution. The initial algorithm I proposed for #5527 does not work as well as I hoped. I have a revised plan which is much more similar to what we do today.
- Deref vs deref-mut. The initial fix I had worked great for autoderef, but not for explicit deref.
- Permitting blanket impls to overlap with specific impls. Initial plan to consider all nested obligations before considering an impl to match caused many compilation errors. We have a revised plan but it is not implemented here, should be a relatively straightforward extension.
I would like to map this information back to AST nodes, so that we can print remarks with spans, and so that remarks can be enabled on a per-function basis. Unfortunately, doing this would require a lot more code restructuring — for example, we currently throw away the AST map and lots of other information before LLVM optimizations run. So for the time being, we print the remarks with debug location strings from LLVM. There's a warning if you use `-C remark` without `--debuginfo`.
Fixes#17116.
`Box<[T]>` is created by allocating `Box<[T, ..n]>` and coercing it so
this code path is never used. It's also broken because it clamps the
capacity of the memory allocations to 4 elements and that's incompatible
with sized deallocation. This dates back to when `~[T]` was a growable
vector type implemented as:
*{ { tydesc, ref_count, prev, next }, { length, capacity, data[] } }
Since even empty vectors had to allocate, it started off the capacity of
all vectors at 4 as a heuristic. It's not possible to grow `Box<[T]>`
and there is no need for a memory allocation when it's empty, so it
would be a terrible heuristic today even if it worked.
`Box<[T]>` is created by allocating `Box<[T, ..n]>` and coercing it so
this code path is never used. It's also broken because it clamps the
capacity of the memory allocations to 4 elements and that's incompatible
with sized deallocation. This dates back to when `~[T]` was a growable
vector type implemented as:
*{ { tydesc, ref_count, prev, next }, { length, capacity, data[] } }
Since even empty vectors had to allocate, it started off the capacity of
all vectors at 4 as a heuristic. It's not possible to grow `Box<[T]>`
and there is no need for a memory allocation when it's empty, so it
would be a terrible heuristic today even if it worked.
The pointer in the slice must not be null, because enum representations
make that assumption. The `exchange_malloc` function returns a non-null
sentinel for the zero size case, and it must not be passed to the
`exchange_free` lang item.
Since the length is always equal to the true capacity, a branch on the
length is enough for most types. Slices of zero size types are
statically special cased to never attempt deallocation. This is the same
implementation as `Vec<T>`.
Closes#14395
This allows code to access the fields of tuples and tuple structs:
let x = (1i, 2i);
assert_eq!(x.1, 2);
struct Point(int, int);
let origin = Point(0, 0);
assert_eq!(origin.0, 0);
assert_eq!(origin.1, 0);
The pointer in the slice must not be null, because enum representations
make that assumption. The `exchange_malloc` function returns a non-null
sentinel for the zero size case, and it must not be passed to the
`exchange_free` lang item.
Since the length is always equal to the true capacity, a branch on the
length is enough for most types. Slices of zero size types are
statically special cased to never attempt deallocation. This is the same
implementation as `Vec<T>`.
Closes#14395
A match in callee.rs was recognizing some foreign fns as named tuple constructors. A reproducible test case for this is nearly impossible since it depends on the way NodeIds happen to be assigned in different crates.
Fixes#15913
Adjust the handling of `#[inline]` items so that they get translated into every
compilation unit that uses them. This is necessary to preserve the semantics
of `#[inline(always)]`.
Crate-local `#[inline]` functions and statics are blindly translated into every
compilation unit. Cross-crate inlined items and monomorphizations of
`#[inline]` functions are translated the first time a reference is seen in each
compilation unit. When using multiple compilation units, inlined items are
given `available_externally` linkage whenever possible to avoid duplicating
object code.
Add a post-processing pass to `trans` that converts symbols from external to
internal when possible. Translation with multiple compilation units initially
makes most symbols external, since it is not clear when translating a
definition whether that symbol will need to be accessed from another
compilation unit. This final pass internalizes symbols that are not reachable
from other crates and not referenced from other compilation units, so that LLVM
can perform more aggressive optimizations on those symbols.
Use a shared lookup table of previously-translated monomorphizations/glue
functions to avoid translating those functions in every compilation unit where
they're used. Instead, the function will be translated in whichever
compilation unit uses it first, and the remaining compilation units will link
against that original definition.
Rotate between compilation units while translating. The "worker threads"
commit added support for multiple compilation units, but only translated into
one, leaving the rest empty. With this commit, `trans` rotates between various
compilation units while translating, using a simple stragtegy: upon entering a
module, switch to translating into whichever compilation unit currently
contains the fewest LLVM instructions.
Most of the actual changes here involve getting symbol linkage right, so that
items translated into different compilation units will link together properly
at the end.
When inlining an item from another crate, use the original symbol from that
crate's metadata instead of generating a new symbol using the `ast::NodeId` of
the inlined copy. This requires exporting symbols in the crate metadata in a
few additional cases. Having predictable symbols for inlined items will be
useful later to avoid generating duplicate object code for inlined items.
Refactor the code in `llvm::back` that invokes LLVM optimization and codegen
passes so that it can be called from worker threads. (Previously, it used
`&Session` extensively, and `Session` is not `Share`.) The new code can handle
multiple compilation units, by compiling each unit to `crate.0.o`, `crate.1.o`,
etc., and linking together all the `crate.N.o` files into a single `crate.o`
using `ld -r`. The later linking steps can then be run unchanged.
The new code preserves the behavior of `--emit`/`-o` when building a single
compilation unit. With multiple compilation units, the `--emit=asm/ir/bc`
options produce multiple files, so combinations like `--emit=ir -o foo.ll` will
not actually produce `foo.ll` (they instead produce several `foo.N.ll` files).
The new code supports `-Z lto` only when using a single compilation unit.
Compiling with multiple compilation units and `-Z lto` will produce an error.
(I can't think of any good reason to do such a thing.) Linking with `-Z lto`
against a library that was built as multiple compilation units will also fail,
because the rlib does not contain a `crate.bytecode.deflate` file. This could
be supported in the future by linking together the `crate.N.bc` files produced
when compiling the library into a single `crate.bc`, or by making the LTO code
support multiple `crate.N.bytecode.deflate` files.
Break up `CrateContext` into `SharedCrateContext` and `LocalCrateContext`. The
local piece corresponds to a single compilation unit, and contains all
LLVM-related components. (LLVM data structures are tied to a specific
`LLVMContext`, and we will need separate `LLVMContext`s to safely run
multithreaded optimization.) The shared piece contains data structures that
need to be shared across all compilation units, such as the `ty::ctxt` and some
tables related to crate metadata.
They were only correct in the simplest case. Some of the optimisations
are certainly possible but should be introduced carefully and only
when the whole pattern codegen infrastructure is in a better shape.
Fixes#16648.
For example `let _x: &Trait = &*(box Foo as Box<Trait>);`. There was a bug where no cleanup would be scheduled by the deref.
No test because cleanup-auto-borrow-obj.rs is a test for this once we remove trait cross-borrowing (done on another branch).
They were only correct in the simplest case. Some of the optimisations
are certainly possible but should be introduced carefully and only
when the whole pattern codegen infrastructure is in a better shape.
Fixes#16648.
Fixes#12643
> Say!
> I like labelled breaks/continues!
I will use them with a `for` loop.
And I will use with a `loop` loop.
Say! I will use them ANYWHERE!
… _even_ in a `while` loop.
Because they're now supported there.
This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
Per API meeting
https://github.com/rust-lang/meeting-minutes/blob/master/Meeting-API-review-2014-08-13.md
# Changes to `core::option`
Most of the module is marked as stable or unstable; most of the unstable items are awaiting resolution of conventions issues.
However, a few methods have been deprecated, either due to lack of use or redundancy:
* `take_unwrap`, `get_ref` and `get_mut_ref` (redundant, and we prefer for this functionality to go through an explicit .unwrap)
* `filtered` and `while`
* `mutate` and `mutate_or_set`
* `collect`: this functionality is being moved to a new `FromIterator` impl.
# Changes to `core::result`
Most of the module is marked as stable or unstable; most of the unstable items are awaiting resolution of conventions issues.
* `collect`: this functionality is being moved to a new `FromIterator` impl.
* `fold_` is deprecated due to lack of use
* Several methods found in `core::option` are added here, including `iter`, `as_slice`, and variants.
Due to deprecations, this is a:
[breaking-change]
[breaking-change]
1. The internal layout for traits has changed from (vtable, data) to (data, vtable). If you were relying on this in unsafe transmutes, you might get some very weird and apparently unrelated errors. You should not be doing this! Prefer not to do this at all, but if you must, you should use raw::TraitObject rather than hardcoding rustc's internal representation into your code.
2. The minimal type of reference-to-vec-literals (e.g., `&[1, 2, 3]`) is now a fixed size vec (e.g., `&[int, ..3]`) where it used to be an unsized vec (e.g., `&[int]`). If you want the unszied type, you must explicitly give the type (e.g., `let x: &[_] = &[1, 2, 3]`). Note in particular where multiple blocks must have the same type (e.g., if and else clauses, vec elements), the compiler will not coerce to the unsized type without a hint. E.g., `[&[1], &[1, 2]]` used to be a valid expression of type '[&[int]]'. It no longer type checks since the first element now has type `&[int, ..1]` and the second has type &[int, ..2]` which are incompatible.
3. The type of blocks (including functions) must be coercible to the expected type (used to be a subtype). Mostly this makes things more flexible and not less (in particular, in the case of coercing function bodies to the return type). However, in some rare cases, this is less flexible. TBH, I'm not exactly sure of the exact effects. I think the change causes us to resolve inferred type variables slightly earlier which might make us slightly more restrictive. Possibly it only affects blocks with unreachable code. E.g., `if ... { fail!(); "Hello" }` used to type check, it no longer does. The fix is to add a semicolon after the string.
As of RFC 18, struct layout is undefined. Opting into a C-compatible struct
layout is now down with #[repr(C)]. For consistency, specifying a packed
layout is now also down with #[repr(packed)]. Both can be specified.
To fix errors caused by this, just add #[repr(C)] to the structs, and change
#[packed] to #[repr(packed)]
Closes#14309
[breaking-change]
It's unfortunate that the read+write operands need special treatment in the AST. A separate vec for all expressions is an alternative, but it doesn't play nicely with trans.
Fixes#14936
Stop read+write expressions from expanding into two occurences
in the AST. Add a bool to indicate whether an operand in output
position if read+write or not.
Fixes#14936
declared with the same name in the same scope.
This breaks several common patterns. First are unused imports:
use foo::bar;
use baz::bar;
Change this code to the following:
use baz::bar;
Second, this patch breaks globs that import names that are shadowed by
subsequent imports. For example:
use foo::*; // including `bar`
use baz::bar;
Change this code to remove the glob:
use foo::{boo, quux};
use baz::bar;
Or qualify all uses of `bar`:
use foo::{boo, quux};
use baz;
... baz::bar ...
Finally, this patch breaks code that, at top level, explicitly imports
`std` and doesn't disable the prelude.
extern crate std;
Because the prelude imports `std` implicitly, there is no need to
explicitly import it; just remove such directives.
The old behavior can be opted into via the `import_shadowing` feature
gate. Use of this feature gate is discouraged.
This implements RFC #116.
Closes#16464.
[breaking-change]
These are already marked as `noalias` due to the immutability guarantee
(see 4c2d4cd3de), but more information can
be bubbled up to the caller via `readonly`.
When a struct implements Drop, its fields should still drop in
declaration order (just as they do when the struct does not implement
Drop).
Fixes#16492.
When a struct implements Drop, its fields should still drop in
declaration order (just as they do when the struct does not implement
Drop).
Fixes#16492.
The discriminant for Option values is either 0 or 1, so we can just
truncate the value to an i1, which ends up as a no-op for Options
containing pointers.
These are already marked as `noalias` due to the immutability guarantee
(see 4c2d4cd3de), but more information can
be bubbled up to the caller via `readonly`.
The discriminant for Option values is either 0 or 1, so we can just
truncate the value to an i1, which ends up as a no-op for Options
containing pointers.
These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
r? @nikomatsakis (or whoever)
These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
methods.
This paves the way to associated items by introducing an extra level of
abstraction ("impl-or-trait item") between traits/implementations and
methods. This new abstraction is encoded in the metadata and used
throughout the compiler where appropriate.
There are no functional changes; this is purely a refactoring.
This patch primarily does two things: (1) it prevents lifetimes from
leaking out of unboxed closures; (2) it allows unboxed closure type
notation, call notation, and construction notation to construct closures
matching any of the three traits.
This breaks code that looked like:
let mut f;
{
let x = &5i;
f = |&mut:| *x + 10;
}
Change this code to avoid having a reference escape. For example:
{
let x = &5i;
let mut f; // <-- move here to avoid dangling reference
f = |&mut:| *x + 10;
}
I believe this is enough to consider unboxed closures essentially
implemented. Further issues (for example, higher-rank lifetimes) should
be filed as followups.
Closes#14449.
[breaking-change]
r? @pnkfelix
This patch primarily does two things: (1) it prevents lifetimes from
leaking out of unboxed closures; (2) it allows unboxed closure type
notation, call notation, and construction notation to construct closures
matching any of the three traits.
This breaks code that looked like:
let mut f;
{
let x = &5i;
f = |&mut:| *x + 10;
}
Change this code to avoid having a reference escape. For example:
{
let x = &5i;
let mut f; // <-- move here to avoid dangling reference
f = |&mut:| *x + 10;
}
I believe this is enough to consider unboxed closures essentially
implemented. Further issues (for example, higher-rank lifetimes) should
be filed as followups.
Closes#14449.
[breaking-change]
by-reference upvars.
This partially implements RFC 38. A snapshot will be needed to turn this
on, because stage0 cannot yet parse the keyword.
Part of #12381.
For historical reasons, "Win32" has been used in Rust codebase to mean "Windows OS in general".
This is confusing, especially now, that Rust supports Win64 builds.
[breaking-change]
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
Generic extern functions written in Rust have their names mangled, as well as their internal clownshoe __rust_abi functions. This allows e.g. specific monomorphizations of these functions to be used as callbacks.
Closes#12502.
The `type_overflow` lint, doesn't catch the overflow for `i64` because
the overflow happens earlier in the parse phase when the `u64` as biggest
possible int gets casted to `i64` , without checking the for overflows.
We can't lint in the parse phase, so a refactoring of the `LitInt` type
was necessary.
The types `LitInt`, `LitUint` and `LitIntUnsuffixed` where merged to one
type `LitInt` which stores it's value as `u64`. An additional parameter was
added which indicate the signedness of the type and the sign of the value.
Using the Show impl for Names created global symbols with names like
`"str\"str\"(1027)"`. This adjusts strings, binaries and vtables to
avoid using that impl.
Fixes#15799.
When generating a unique symbol for things like closures or glue_drop,
we call token::gensym() to create a crate-unique Name. Recently, Name
changed its Show impl so it no longer prints as a number. This caused
symbols like glue_drop:1542 to become glue_drop:"glue_drop"(1542), or in
mangled form, glue_drop.$x22glue_drop$x22$LP$1542$RP$.
When generating a unique symbol for things like closures or glue_drop,
we call token::gensym() to create a crate-unique Name. Recently, Name
changed its Show impl so it no longer prints as a number. This caused
symbols like glue_drop:1542 to become glue_drop:"glue_drop"(1542), or in
mangled form, glue_drop.$x22glue_drop$x22$LP$1542$RP$.
Our implementation of ebml has diverged from the standard in order
to better serve the needs of the compiler, so it doesn't make much
sense to call what we have ebml anyore. Furthermore, our implementation
is pretty crufty, and should eventually be rewritten into a format
that better suits the needs of the compiler. This patch factors out
serialize::ebml into librbml, otherwise known as the Really Bad
Markup Language. This is a stopgap library that shouldn't be used
by end users, and will eventually be replaced by something better.
[breaking-change]
Currently we don't emit lifetime end markers when translating the
unwinding code. I omitted that when I added the support for lifetime
intrinsics, because I initially made the mistake of just returning true
in clean_on_unwind(). That caused almost all calls to be translated as
invokes, leading to quite awful results.
To correctly emit the lifetime end markers, we must differentiate
between cleanup that requires unwinding and such cleanup that just wants
to emit code during unwinding.
Currently we don't emit lifetime end markers when translating the
unwinding code. I omitted that when I added the support for lifetime
intrinsics, because I initially made the mistake of just returning true
in clean_on_unwind(). That caused almost all calls to be translated as
invokes, leading to quite awful results.
To correctly emit the lifetime end markers, we must differentiate
between cleanup that requires unwinding and such cleanup that just wants
to emit code during unwinding.
This makes edge cases in which the `Iterator` trait was not in scope
and/or `Option` or its variants were not in scope work properly.
This breaks code that looks like:
struct MyStruct { ... }
impl MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
for x in MyStruct { ... } { ... }
Change ad-hoc `next` methods like the above to implementations of the
`Iterator` trait. For example:
impl Iterator<int> for MyStruct {
fn next(&mut self) -> Option<int> { ... }
}
Closes#15392.
[breaking-change]
The allocas used in match expression currently don't get good lifetime
markers, in fact they only get lifetime start markers, because their
lifetimes don't match to cleanup scopes.
While the bindings themselves are bog standard and just need a matching
pair of start and end markers, they might need them twice, once for a
guard clause and once for the match body.
The __llmatch alloca OTOH needs a single lifetime start marker, but
when there's a guard clause, it needs two end markers, because its
lifetime ends either when the guard doesn't match or after the match
body.
With these intrinsics in place, LLVM can now, for example, optimize
code like this:
````rust
enum E {
A1(int),
A2(int),
A3(int),
A4(int),
}
pub fn variants(x: E) {
match x {
A1(m) => bar(&m),
A2(m) => bar(&m),
A3(m) => bar(&m),
A4(m) => bar(&m),
}
}
````
To a single call to bar, using only a single stack slot. It still fails
to eliminate some of checks.
````gas
.Ltmp5:
.cfi_def_cfa_offset 16
movb (%rdi), %al
testb %al, %al
je .LBB3_5
movzbl %al, %eax
cmpl $1, %eax
je .LBB3_5
cmpl $2, %eax
.LBB3_5:
movq 8(%rdi), %rax
movq %rax, (%rsp)
leaq (%rsp), %rdi
callq _ZN3bar20hcb7a0d8be8e17e37daaE@PLT
popq %rax
retq
````
Lifetime intrinsics help to reduce stack usage, because LLVM can apply
stack coloring to reuse the stack slots of dead allocas for new ones.
For example these functions now both use the same amount of stack, while
previous `bar()` used five times as much as `foo()`:
````rust
fn foo() {
println("{}", 5);
}
fn bar() {
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
}
````
On top of that, LLVM can also optimize out certain operations when it
knows that memory is dead after a certain point. For example, it can
sometimes remove the zeroing used to cancel the drop glue. This is
possible when the glue drop itself was already removed because the
zeroing dominated the drop glue call. For example in:
````rust
pub fn bar(x: (Box<int>, int)) -> (Box<int>, int) {
x
}
````
With optimizations, this currently results in:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.memset.p0i8.i64(i8* %2, i8 0, i64 16, i32 8, i1 false)
ret void
}
````
But with lifetime intrinsics we get:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.lifetime.end(i64 16, i8* %2)
ret void
}
````
Fixes#15665
Lifetime intrinsics help to reduce stack usage, because LLVM can apply
stack coloring to reuse the stack slots of dead allocas for new ones.
For example these functions now both use the same amount of stack, while
previous `bar()` used five times as much as `foo()`:
````rust
fn foo() {
println("{}", 5);
}
fn bar() {
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
println("{}", 5);
}
````
On top of that, LLVM can also optimize out certain operations when it
knows that memory is dead after a certain point. For example, it can
sometimes remove the zeroing used to cancel the drop glue. This is
possible when the glue drop itself was already removed because the
zeroing dominated the drop glue call. For example in:
````rust
pub fn bar(x: (Box<int>, int)) -> (Box<int>, int) {
x
}
````
With optimizations, this currently results in:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.memset.p0i8.i64(i8* %2, i8 0, i64 16, i32 8, i1 false)
ret void
}
````
But with lifetime intrinsics we get:
````llvm
define void @_ZN3bar20h330fa42547df8179niaE({ i64*, i64 }* noalias nocapture nonnull sret, { i64*, i64 }* noalias nocapture nonnull) unnamed_addr #0 {
"_ZN29_$LP$Box$LT$int$GT$$C$int$RP$39glue_drop.$x22glue_drop$x22$LP$1347$RP$17h88cf42702e5a322aE.exit":
%2 = bitcast { i64*, i64 }* %1 to i8*
%3 = bitcast { i64*, i64 }* %0 to i8*
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* %3, i8* %2, i64 16, i32 8, i1 false)
tail call void @llvm.lifetime.end(i64 16, i8* %2)
ret void
}
````
Fixes#15665
`call_visit_glue` is only ever called from trans_intrinsic, and the
block won't be unreachable there. Also, the comment doesn't make sense
anymore. When the code was introduced in 38fee9526a the function was
also responsible for the cleanup glue, which is no longer the case.
While we're at it, also fixed the debug message to output the right
function name.
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
r? @nick29581
This is accomplished by rewriting static expressions into equivalent patterns.
This way, patterns referencing static variables can both participate
in exhaustiveness analysis as well as be compiled down into the appropriate
branch of the decision trees that match expressions are codegened to.
Fixes#6533.
Fixes#13626.
Fixes#13731.
Fixes#14576.
Fixes#15393.
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
This is accomplished by rewriting static expressions into equivalent patterns.
This way, patterns referencing static variables can both participate
in exhaustiveness analysis as well as be compiled down into the appropriate
branch of the decision trees that match expressions are codegened to.
Fixes#6533.
Fixes#13626.
Fixes#13731.
Fixes#14576.
Fixes#15393.
`call_visit_glue` is only ever called from trans_intrinsic, and the
block won't be unreachable there. Also, the comment doesn't make sense
anymore. When the code was introduced in 38fee9526a the function was
also responsible for the cleanup glue, which is no longer the case.
While we're at it, also fixed the debug message to output the right
function name.
This should fix issue #15541. It would be good to have an test case for this would also be nice but I haven't had the time to write one. The change is very small though and it doesn't break anything in the existing test suite, so I guess we can add it without test for now.
except where trait objects are involved.
Part of issue #15349, though I'm leaving it open for trait objects.
Cross borrowing for trait objects remains because it is needed until we
have DST.
This will break code like:
fn foo(x: &int) { ... }
let a = box 3i;
foo(a);
Change this code to:
fn foo(x: &int) { ... }
let a = box 3i;
foo(&*a);
[breaking-change]
This makes two changes to region inference: (1) it allows region
inference to relate early-bound regions; and (2) it allows regions to be
related before variance runs. The former is needed because there is no
relation between the two regions before region substitution happens,
while the latter is needed because type collection has to run before
variance. We assume that, before variance is inferred, that lifetimes
are invariant. This is a conservative overapproximation.
This relates to #13885. This does not remove `~self` from the language
yet, however.
[breaking-change]
Disabling the redzone is required in x86-64's kernel mode to avoid interrupts trashing the stack.
I'm not sure if decl_fn is the right place to tag all functions with noredzone. It might have interactions with external functions when linking with bitcode built without -C no-redzone although I see no reason to do that.
I'm not sure how to write a test inspecting the bitcode output for noredzone attributes on all functions either.
Per @pnkfelix 's suggestion, using a trait to make these
field accesses more readable (and vastly more similar
to the original code.
oops fix new ast_map fix
This change propagates to many locations, but because of the
Macro Exterminator (or, more properly, the invariant that it
protects), macro invocations can't occur downstream of expansion.
This means that in librustc and librustdoc, extracting the
desired field can simply assume that it can't be a macro
invocation. Functions in ast_util abstract over this check.
This removes a bunch of token types. Tokens now store the original, unaltered
numeric literal (that is still checked for correctness), which is parsed into
an actual number later, as needed, when creating the AST.
This can change how syntax extensions work, but otherwise poses no visible
changes.
[breaking-change]
formerly, the self identifier was being discarded during parsing, which
stymies hygiene. The best fix here seems to be to attach a self identifier
to ExplicitSelf_, a change that rippled through the rest of the compiler,
but without any obvious damage.
Extend the null ptr optimization to work with slices, closures, procs, & trait objects by using the internal pointers as the discriminant.
This decreases the size of `Option<&[int]>` (and similar) by one word.
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
r? @nick29581
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
LLVM doesn't handle i1 value in allocas/memory very well and skips a number of optimizations if it hits it. So we have to do the same thing that Clang does, using i1 for SSA values, but storing i8 in memory.
Fixes#15203.
LLVM doesn't really like types with a bit-width that isn't a multiple of
8 and disable various optimizations if it encounters such types used
with loads/stores. OTOH, booleans must be represented as i1 when used as
SSA values. To get the best results, we must use i1 for SSA values, and
i8 when storing the value to memory.
By using range asserts on loads, LLVM can eliminate the required
zero-extend and truncate operations.
Fixes#15203
This comit implements a new flag, --extern, which is used to specify where a
crate is located. The purpose of this flag is to bypass the normal crate
loading/matching of the compiler to point it directly at the right file.
This flag takes the form `--extern foo=bar` where `foo` is the name of a crate
and `bar` is the location at which to find the crate. Multiple `--extern`
directives are allowed with the same crate name to specify the rlib/dylib pair
for a crate. It is invalid to specify more than one rlib or more than one dylib,
and it's required that the crates are valid rust crates.
I have also added some extensive documentation to metadata::loader about how
crate loading should work.
RFC: 0035-remove-crate-id
