Introduce an ArchiveBuilderBuilder
This avoids monomorphizing all linker code for each codegen backend and will allow passing in extra information to the archive builder from the codegen backend. I'm going to use this in https://github.com/rust-lang/rust/pull/97485 to allow passing in the right function to extract symbols from object files to a generic archive builder to be used by cg_llvm, cg_clif and cg_gcc.
Use `impl`'s generics when suggesting fix on bad `impl Copy`
See the UI test for a more complicated example, but we weren't correctly suggesting to add bounds given a manual `impl` whose generics didn't match the struct generics.
```rust
#[derive(Clone)]
struct Wrapper<T>(T);
impl<S> Copy for Wrapper<S> {}
```
Coincidentally this fix didn't cause any regressions for `derive(Copy)` impls, I think because those use the same spans in the impl generics as the struct generics, so the machinery still applies the same change.
Rewrite Windows `compat_fn` macro
This allows using most delay loaded functions before the init code initializes them. It also only preloads a select few functions, rather than all functions.
This is optimized for the common case where a function is used after already being loaded (or failed to load). The only change in codegen at the call site is to use an atomic load instead of a plain load, which should have negligible or no impact.
I've split the old `compat_fn` macro in two so as not to mix two different use cases. If/when Windows 7 support is dropped `compat_fn_optional` can be removed entirely.
r? rust-lang/libs
Fix the size of niche enums with ZST alignment
For enums with an aligned ZST variant, like `[T; 0]`, the niche layout
was not computing a sufficient size to be consistent with alignment. Now
we pad that size up to the alignment, and also make sure to only use the
niche variant's ABI when the size and alignment still match.
Fixes#99836
r? `@eddyb`
Also gate AllocatedPointer and AllocAlign definitions by LLVM_VERSION_GE
Fixes a warning:
```
warning: llvm-wrapper/RustWrapper.cpp:159:11: warning: enumeration values 'AllocatedPointer' and 'AllocAlign' not handled in switch [-Wswitch]
warning: switch (Kind) {
warning: ^
```
Which was fall out from 130a1df71e.
Fixes#99955
For enums with an aligned ZST variant, like `[T; 0]`, the niche layout
was not computing a sufficient size to be consistent with alignment. Now
we pad that size up to the alignment, and also make sure to only use the
niche variant's ABI when the size and alignment still match.
Rollup of 5 pull requests
Successful merges:
- #99311 (change maybe_body_owned_by to take local def id)
- #99862 (Improve type mismatch w/ function signatures)
- #99895 (don't call type ascription "cast")
- #99900 (remove some manual hash stable impls)
- #99903 (Add diagnostic when using public instead of pub)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Fixes a warning:
warning: llvm-wrapper/RustWrapper.cpp:159:11: warning: enumeration values 'AllocatedPointer' and 'AllocAlign' not handled in switch [-Wswitch]
warning: switch (Kind) {
warning: ^
Which was fall out from 130a1df71e.
Add diagnostic when using public instead of pub
Forwarding from https://github.com/rust-lang/rust/pull/99706
I accidentally broke something(??) in git and the commits in that PR are absolutely not what I did in that branch
Anyways, this is the PR for this now. Adding tests again in a minute.
cc `@davidtwco`
Improve type mismatch w/ function signatures
This PR makes use of `note: expected/found` (instead of labeling types in labels) in type mismatch with function signatures. Pros: it's easier to compare the signatures, cons: the error is a little more verbose now.
This is especially nice when
- The signatures differ in a small subset of parameters (same parameters are elided)
- The difference is in details, for example `isize` vs `usize` (there is a better chance that the types align)
Also this PR fixes the inconsistency in variable names in the edited code (`expected` and `found`).
A zulip thread from which this pr started: [[link]](https://rust-lang.zulipchat.com/#narrow/stream/147480-t-compiler.2Fwg-diagnostics/topic/Type.20error.20regression.3F.2E.2E.2E/near/289756602).
An example diagnostic:
<table>
<tr>
<th>this pr</th>
<th>nightly</th>
</tr>
<tr>
<td>
```text
error[E0631]: type mismatch in function arguments
--> ./t.rs:4:12
|
4 | expect(&f);
| ------ ^^ expected due to this
| |
| required by a bound introduced by this call
...
10 | fn f(_: isize, _: u8, _: Vec<u32>) {}
| ---------------------------------- found signature defined here
|
= note: expected function signature `fn(usize, _, Vec<u64>) -> _`
found function signature `fn(isize, _, Vec<u32>) -> _`
note: required because of the requirements on the impl of `Trait` for `fn(isize, u8, Vec<u32>) {f}`
--> ./t.rs:8:9
|
8 | impl<F> Trait for F where F: Fn(usize, u8, Vec<u64>) -> u8 {}
| ^^^^^ ^
= note: required for the cast from `fn(isize, u8, Vec<u32>) {f}` to the object type `dyn Trait`
```
</td>
<td>
```text
error[E0631]: type mismatch in function arguments
--> ./t.rs:4:12
|
4 | expect(&f);
| ------ ^^ expected signature of `fn(usize, u8, Vec<u64>) -> _`
| |
| required by a bound introduced by this call
...
10 | fn f(_: isize, _: u8, _: Vec<u32>) {}
| ---------------------------------- found signature of `fn(isize, u8, Vec<u32>) -> _`
|
note: required because of the requirements on the impl of `Trait` for `fn(isize, u8, Vec<u32>) {f}`
--> ./t.rs:8:9
|
8 | impl<F> Trait for F where F: Fn(usize, u8, Vec<u64>) -> u8 {}
| ^^^^^ ^
= note: required for the cast to the object type `dyn Trait`
```
</td>
</tr>
</table>
<details><summary>code</summary>
<p>
```rust
fn main() {
fn expect(_: &dyn Trait) {}
expect(&f);
}
trait Trait {}
impl<F> Trait for F where F: Fn(usize, u8, Vec<u64>) -> u8 {}
fn f(_: isize, _: u8, _: Vec<u32>) {}
```
</p>
</details>
r? `@compiler-errors`
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
Only __rustc_proc_macro_decls_*__ and rust_metadata_* need to be
exported for proc macros to work. All other symbols only increase binary
size and have the potential to conflict with symbols from the host
compiler.
use `check_region_obligations_and_report_errors` to avoid ICEs
If we don't call `process_registered_region_obligations` before `resolve_regions_and_report_errors` then we'll ICE if we have any region obligations, and `check_region_obligations_and_report_errors` just does both of these for us in a nice convenient function.
Fixes#53475
r? types
proc_macro: use crossbeam channels for the proc_macro cross-thread bridge
This is done by having the crossbeam dependency inserted into the `proc_macro` server code from the server side, to avoid adding a dependency to `proc_macro`.
In addition, this introduces a -Z command-line option which will switch rustc to run proc-macros using this cross-thread executor. With the changes to the bridge in #98186, #98187, #98188 and #98189, the performance of the executor should be much closer to same-thread execution.
In local testing, the crossbeam executor was substantially more performant than either of the two existing `CrossThread` strategies, so they have been removed to keep things simple.
r? `@eddyb`
Rollup of 8 pull requests
Successful merges:
- #99227 (Fix thumbv4t-none-eabi frame pointer setting)
- #99518 (Let-else: break out scopes when a let-else pattern fails to match)
- #99671 (Suggest dereferencing index when trying to use a reference of usize as index)
- #99831 (Add Fuchsia platform support documentation)
- #99881 (fix ICE when computing codegen_fn_attrs on closure with non-fn parent)
- #99888 (Streamline lint checking)
- #99891 (Adjust an expr span to account for macros)
- #99904 (Cleanup html whitespace)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Stage 1 check has been supported since https://github.com/rust-lang/rust/pull/81064.
#81064 changed the error message for this, but I don't think there's any reason we should prevent using it.
I tested locally and `keep-stage` works fine. Don't give a hard error when trying to use it.
Cleanup html whitespace
I realized while looking at the raw HTML that we generated some unwanted white space characters. This PR cleans up the one coming directly from rustdoc. I'll check from `pulldown-cmark` for the remaining ones.
Some numbers now: the difference is small, it goes from `63009` to `62859`. But multiplied by the number of files, it becomes quite interesting overall.
r? `@notriddle`
Adjust an expr span to account for macros
Fix this erroneous suggestion:
```
error[E0529]: expected an array or slice, found `Vec<{integer}>`
--> /home/gh-compiler-errors/test.rs:2:9
|
2 | let [..] = vec![1, 2, 3];
| ^^^^ pattern cannot match with input type `Vec<{integer}>`
|
help: consider slicing here
--> /home/gh-compiler-errors/rust2/library/alloc/src/macros.rs:50:36
|
50~ $crate::__rust_force_expr!(<[_]>::into_vec(
51+ #[rustc_box]
52+ $crate::boxed::Box::new([$($x),+])
53~ )[..])
```
