rfc3052 followup: Remove authors field from Cargo manifests
Since RFC 3052 soft deprecated the authors field, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information for contributors, we may as well
remove it from crates in this repo.
Add documentation for `Ipv6MulticastScope`
Adds basic documentation to the unstable `Ipv6MulticastScope`, as well as marking it `#[non_exhaustive]` because future IETF RFCs may introduce additional scopes. The documentation mentions this in a section "Stability Guarantees":
> /// Not all possible values for a multicast scope have been assigned.
/// Future RFCs may introduce new scopes, which will be added as variants to this enum;
/// because of this the enum is marked as `#[non_exhaustive]`.
Move `os_str_bytes` to `sys::unix`
Followup to #84967, with `OsStrExt` and `OsStringExt` moved out of `sys_common`, there is no reason anymore for `os_str_bytes` to live in `sys_common` and not in sys. This pr moves it to the location `sys::unix::os_str` and reuses the code on other platforms via `#[path]` (as is common in `sys`) instead of importing.
Remove `Ipv4Addr::is_ietf_protocol_assignment`
This PR removes the unstable method `Ipv4Addr::is_ietf_protocol_assignment`, as I suggested in https://github.com/rust-lang/rust/issues/85612#issuecomment-847863404. The method was added in #60145, as far as I can tell primarily for the implementation of `Ipv4Addr::is_global` (addresses reserved for IETF protocol assignment are not globally reachable unless otherwise specified).
The method was added in 2019, but I haven't been able to find any open-source code using this method so far. I'm also having a hard time coming up with a usecase for specifically this method; knowing that an address is reserved for future protocols doesn't allow you to do much with it, especially since now some of those addresses are indeed assigned to a protocol and have their own behaviour (and might even be defined to be globally reachable, so if that is what you care about it is always more accurate to call `!is_global()`, instead of `is_ietf_protocol_assignment()`).
Because of these reasons, I propose removing the method (or alternatively make it a private helper for `is_global`) and also not introduce `Ipv6Addr::is_ietf_protocol_assignment` and `IpAddr::is_ietf_protocol_assignment` in the future.
Change environment variable getters to error recoverably
This PR changes the standard library environment variable getter functions to error recoverably (i.e. not panic) when given an invalid value.
On some platforms, it is invalid for environment variable names to contain `'\0'` or `'='`, or for their values to contain `'\0'`. Currently, the standard library panics when manipulating environment variables with names or values that violate these invariants. However, this behavior doesn't make a lot of sense, at least in the case of getters. If the environment variable is missing, the standard library just returns an error value, rather than panicking. It doesn't make sense to treat the case where the variable is invalid any differently from that. See the [internals thread](https://internals.rust-lang.org/t/why-should-std-var-panic/14847) for discussion. Thus, this PR changes the functions to error recoverably in this case as well.
If desired, I could change the functions that manipulate environment variables in other ways as well. I didn't do that here because it wasn't entirely clear what to change them to. Should they error silently or do something else? If someone tells me how to change them, I'm happy to implement the changes.
This fixes#86082, an ICE that arises from the current behavior. It also adds a regression test to make sure the ICE does not occur again in the future.
`@rustbot` label +T-libs
r? `@joshtriplett`
Bump bootstrap compiler to 1.55
Changing the cfgs for stdarch is missing, but my understanding is that we don't need to do it as part of this PR?
r? `@Mark-Simulacrum`
Add Linux-specific pidfd process extensions (take 2)
Continuation of #77168.
I addressed the following concerns from the original PR:
- make `CommandExt` and `ChildExt` sealed traits
- wrap file descriptors in `PidFd` struct representing ownership over the fd
- add `take_pidfd` to take the fd out of `Child`
- close fd when dropped
Tracking Issue: #82971
Move UnwindSafe, RefUnwindSafe, AssertUnwindSafe to core
They were previously only available in std::panic, not core::panic.
- https://doc.rust-lang.org/1.51.0/std/panic/trait.UnwindSafe.html
- https://doc.rust-lang.org/1.51.0/std/panic/trait.RefUnwindSafe.html
- https://doc.rust-lang.org/1.51.0/std/panic/struct.AssertUnwindSafe.html
Where this is relevant: trait objects! Inside a `#![no_std]` library it's otherwise impossible to have a struct holding a trait object, and at the same time can be used from downstream std crates in a way that doesn't interfere with catch_unwind.
```rust
// common library
#![no_std]
pub struct Thing {
pub(crate) x: &'static (dyn SomeTrait + Send + Sync),
}
pub(crate) trait SomeTrait {...}
```
```rust
// downstream application
fn main() {
let thing: library::Thing = ...;
let _ = std::panic::catch_unwind(|| { let _ = thing; }); // does not work :(
}
```
See a4131708e2/src/gradient.rs (L7-L15) for a real life example of needing to work around this problem. In particular that workaround would not even be viable if implementors of the trait were provided externally by a caller, as the `feature = "std"` would become non-additive in that case.
What happens without the UnwindSafe constraints:
```rust
fn main() {
let gradient = colorous::VIRIDIS;
let _ = std::panic::catch_unwind(|| { let _ = gradient; });
}
```
```console
error[E0277]: the type `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
--> src/main.rs:3:13
|
3 | let _ = std::panic::catch_unwind(|| { let _ = gradient; });
| ^^^^^^^^^^^^^^^^^^^^^^^^ `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)` may contain interior mutability and a reference may not be safely transferrable across a catch_unwind boundary
|
::: .rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/std/src/panic.rs:430:40
|
430 | pub fn catch_unwind<F: FnOnce() -> R + UnwindSafe, R>(f: F) -> Result<R> {
| ---------- required by this bound in `catch_unwind`
|
= help: within `Gradient`, the trait `RefUnwindSafe` is not implemented for `(dyn colorous::gradient::EvalGradient + Send + Sync + 'static)`
= note: required because it appears within the type `&'static (dyn colorous::gradient::EvalGradient + Send + Sync + 'static)`
= note: required because it appears within the type `Gradient`
= note: required because of the requirements on the impl of `UnwindSafe` for `&Gradient`
= note: required because it appears within the type `[closure@src/main.rs:3:38: 3:62]`
```
Make `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` warn by default
This PR makes the `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint warn by default.
To avoid showing a large number of un-actionable warnings to users, we only enable the lint for macros defined in the same crate. This ensures that users will be able to fix the warning by simply removing a semicolon.
In the future, I'd like to enable this lint unconditionally, and eventually make it into a hard error in a future edition. This PR is a step towards that goal.
[backtraces]: look for the `begin` symbol only after seeing `end`
On `x86_64-pc-windows-msvc`, we often get backtraces which look like
this:
```
10: 0x7ff77e0e9be5 - std::panicking::rust_panic_with_hook
11: 0x7ff77e0e11b4 - std::sys_common::backtrace::__rust_begin_short_backtrace::h5769736bdb11136c
12: 0x7ff77e0e116f - std::sys_common::backtrace::__rust_end_short_backtrace::h61c7ecb1b55338ae
13: 0x7ff77e0f89dd - std::panicking::begin_panic::h8e60ef9f82a41805
14: 0x7ff77e0e108c - d
15: 0x7ff77e0e1069 - c
16: 0x7ff77e0e1059 - b
17: 0x7ff77e0e1049 - a
18: 0x7ff77e0e1039 - core::ptr::drop_in_place<std::rt::lang_start<()>::{{closure}}>::h1bfcd14d5e15ba81
19: 0x7ff77e0e1186 - std::sys_common::backtrace::__rust_begin_short_backtrace::h5769736bdb11136c
20: 0x7ff77e0e100c - std::rt::lang_start::{{closure}}::ha054184bbf9921e3
```
Notice that `__rust_begin_short_backtrace` appears on frame 11 before
`__rust_end_short_backtrace` on frame 12. This is because in typical
release binaries without debug symbols, dbghelp.dll, which we use to walk
and symbolize the stack, does not know where CGU internal functions
start or end and so the closure invoked by `__rust_end_short_backtrace`
is incorrectly described as `__rust_begin_short_backtrace` because it
happens to be near that symbol.
While that can obviously change, this has been happening quite
consistently since #75048. Since this is a very small change to the std
and the change makes sense by itself, I think this is worth doing.
This doesn't completely resolve the situation for release binaries on
Windows, since without debug symbols, the stack printed can still show
incorrect symbol names (this is why the test uses `#[no_mangle]`) but it
does slightly improve the situation in that you see the same backtrace
you would see with `RUST_BACKTRACE=full` or in a debugger (without the
uninteresting bits at the top and bottom).
Fixes part of #87481
Fix may not to appropriate might not or must not
I went through and changed occurrences of `may not` to be more explicit with `might not` and `must not`.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
On `x86_64-pc-windows-msvc`, we often get backtraces which look like
this:
```
10: 0x7ff77e0e9be5 - std::panicking::rust_panic_with_hook
11: 0x7ff77e0e11b4 - std::sys_common::backtrace::__rust_begin_short_backtrace::h5769736bdb11136c
12: 0x7ff77e0e116f - std::sys_common::backtrace::__rust_end_short_backtrace::h61c7ecb1b55338ae
13: 0x7ff77e0f89dd - std::panicking::begin_panic::h8e60ef9f82a41805
14: 0x7ff77e0e108c - d
15: 0x7ff77e0e1069 - c
16: 0x7ff77e0e1059 - b
17: 0x7ff77e0e1049 - a
18: 0x7ff77e0e1039 - core::ptr::drop_in_place<std::rt::lang_start<()>::{{closure}}>::h1bfcd14d5e15ba81
19: 0x7ff77e0e1186 - std::sys_common::backtrace::__rust_begin_short_backtrace::h5769736bdb11136c
20: 0x7ff77e0e100c - std::rt::lang_start::{{closure}}::ha054184bbf9921e3
```
Notice that `__rust_begin_short_backtrace` appears on frame 11 before
`__rust_end_short_backtrace` on frame 12. This is because in typical
release binaries without debug symbols, dbghelp.dll, which we use to walk
and symbolize the stack, does not know where CGU internal functions
start or end and so the closure invoked by `__rust_end_short_backtrace`
is incorrectly described as `__rust_begin_short_backtrace` because it
happens to be near that symbol.
While that can obviously change, this has been happening quite
consistently since #75048. Since this is a very small change to the std
and the change makes sense by itself, I think this is worth doing.
This doesn't completely resolve the situation for release binaries on
Windows, since without debug symbols, the stack printed can still show
incorrect symbol names (this is why the test uses `#[no_mangle]`) but it
does slightly improve the situation in that you see the same backtrace
you would see with `RUST_BACKTRACE=full` or in a debugger (without the
uninteresting bits at the top and bottom).
I looked in stdlib and as @BurntSushi thought, `raw` is generally
used for raw pointers, or other hazardous kinds of thing. stdlib does
not have `into_parts` apart from the one I added to `IntoInnerError`.
I did an ad-hoc search of the rustdocs for my current game project
Otter, which includes quite a large number of dependencies.
`into_parts` seems heavily used for things quite like this.
So change this name.
Suggested-by: Andrew Gallant <jamslam@gmail.com>
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
I didn't notice the submodule, which means I failed to re-export this
to make it actually-public.
Reported-by: Andrew Gallant <jamslam@gmail.com>
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Make const panic!("..") work in Rust 2021.
During const eval, this replaces calls to core::panicking::panic_fmt and std::panicking::being_panic_fmt with a call to a new const fn: core::panicking::const_panic_fmt. That function uses fmt::Arguments::as_str() to get the str and calls panic_str with that instead.
panic!() invocations with formatting arguments are still not accepted, as the creation of such a fmt::Arguments cannot be done in constant functions right now.
r? `@RalfJung`
Stabilize core::task::ready!
_Tracking issue: https://github.com/rust-lang/rust/issues/70922_
This PR stabilizes the `task::ready!` macro. Similar to https://github.com/rust-lang/rust/pull/80886, this PR was waiting on https://github.com/rust-lang/rust/issues/74355 to be fixed.
The `task::ready!` API has existed in the futures ecosystem for several years, and was added on nightly last year in https://github.com/rust-lang/rust/pull/70817. The motivation for this macro is the same as it was back then: virtually every single manual future implementation makes use of this; so much so that it's one of the few things included in the [futures-core](https://docs.rs/futures-core/0.3.12/futures_core) library.
r? ``@tmandry``
cc/ ``@rust-lang/wg-async-foundations`` ``@rust-lang/libs``
## Example
```rust
use core::task::{Context, Poll};
use core::future::Future;
use core::pin::Pin;
async fn get_num() -> usize {
42
}
pub fn do_poll(cx: &mut Context<'_>) -> Poll<()> {
let mut f = get_num();
let f = unsafe { Pin::new_unchecked(&mut f) };
let num = ready!(f.poll(cx));
// ... use num
Poll::Ready(())
}
```
During const eval, this replaces calls to core::panicking::panic_fmt and
std::panicking::being_panic_fmt with a call to a new const fn:
core::panicking::const_panic_fmt. That function uses
fmt::Arguments::as_str() to get the str and calls panic_str with that
instead.
panic!() invocations with formatting arguments are still not accepted,
as the creation of such a fmt::Arguments cannot be done in constant
functions right now.
Use hashbrown's `extend_reserve()` in `HashMap`
When we added `extend_reserve()` to our implementation of `Extend` for `HashMap`, hashbrown didn't have a version we could use. Now that hashbrown has added it, we should use its version instead of implementing it ourself.
Update VxWork's UNIX support
1. VxWorks does not provide glibc
2. VxWorks does provide `sigemptyset` and `sigaddset`
Note: these changes are concurrent to [this PR](https://github.com/rust-lang/libc/pull/2295) in libc.
Stabilize `impl From<[(K, V); N]> for HashMap` (and friends)
In addition to allowing HashMap to participate in Into/From conversion, this adds the long-requested ability to use constructor-like syntax for initializing a HashMap:
```rust
let map = HashMap::from([
(1, 2),
(3, 4),
(5, 6)
]);
```
This addition is highly motivated by existing precedence, e.g. it is already possible to similarly construct a Vec from a fixed-size array:
```rust
let vec = Vec::from([1, 2, 3]);
```
...and it is already possible to collect a Vec of tuples into a HashMap (and vice-versa):
```rust
let vec = Vec::from([(1, 2)]);
let map: HashMap<_, _> = vec.into_iter().collect();
let vec: Vec<(_, _)> = map.into_iter().collect();
```
...and of course it is likewise possible to collect a fixed-size array of tuples into a HashMap ([but not vice-versa just yet](https://github.com/rust-lang/rust/issues/81615)):
```rust
let arr = [(1, 2)];
let map: HashMap<_, _> = std::array::IntoIter::new(arr).collect();
```
Therefore this addition seems like a no-brainer.
As for any impl, this would be insta-stable.
Stabilize `into_parts()` and `into_error()`
This stabilizes `IntoInnerError`'s `into_parts()` and `into_error()` methods, currently gated behind the `io_into_inner_error_parts` feature. The FCP has [already completed.](https://github.com/rust-lang/rust/issues/79704#issuecomment-880652967)
Closes#79704.
Document iteration order of `retain` functions
For `HashSet` and `HashMap`, this simply copies the comment from
`BinaryHeap::retain`.
For `BTreeSet` and `BTreeMap`, this adds an additional guarantee that
wasn't previously documented. I think that because these data structures
are inherently ordered and other functions guarantee ordered iteration,
it makes sense to provide this guarantee for `retain` as well.
