Previously, only the end of pass RSS was indicated. This could easily
lead one to believe that the change in RSS from one pass to the next was
attributable to the second pass, when in fact it occurred between the
end of the first pass and the start of the second.
Also, improve alignment of columns.
clean up some const error reporting around promoteds
These are some error reporting simplifications enabled by https://github.com/rust-lang/rust/pull/80579.
Further simplifications are possible but could be blocked on making `const_err` a hard error.
r? ``````@oli-obk``````
Use -target when linking binaries for Mac Catalyst
When running `rustc` with `-target x86_64-apple-ios-macabi`, the linker
eventually gets run with `-arch x86_64`, because the linker back end splits the
LLVM target triple and uses the first token as the target architecture. However,
this does not work for the Mac Catalyst ABI, which is a separate target from
Darwin.
Specifying the full target triple with `-target` allows Mac Catalyst binaries to
link and run.
closes#80202
rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
Refractor a few more types to `rustc_type_ir`
In the continuation of #79169, ~~blocked on that PR~~.
This PR:
- moves `IntVarValue`, `FloatVarValue`, `InferTy` (and friends) and `Variance`
- creates the `IntTy`, `UintTy` and `FloatTy` enums in `rustc_type_ir`, based on their `ast` and `chalk_ir` equilavents, and uses them for types in the rest of the compiler.
~~I will split up that commit to make this easier to review and to have a better commit history.~~
EDIT: done, I split the PR in commits of 200-ish lines each
r? `````@nikomatsakis````` cc `````@jackh726`````
rustc_codegen_ssa: use wall time for codegen_to_LLVM_IR time-passes entry
Use elapsed wall time spent on codegen_to_LLVM_IR for all CGUs as a
whole, rather than the sum for each CGU (the distinction matters for
parallel builds, where some CGUs are processed in parallel).
Use elapsed wall time spent on codegen_to_LLVM_IR for all CGUs as a
whole, rather than the sum for each CGU (the distinction matters for
parallel builds, where some CGUs are processed in parallel).
Fix sysroot option not being honored across rustc
Change link_sanitizer_runtime() to check if the sanitizer library exists in the specified/session sysroot, and if it doesn't exist, use the default sysroot. (See #79253.)
Change link_sanitizer_runtime() to check if the sanitizer library exists
in the specified/session sysroot, and if it doesn't exist, use the
default sysroot.
Optimize DST field access
For
struct X<T: ?Sized>(T)
struct Y<T: ?Sized>(u8, T)
the offset of the unsized field is
0
mem::align_of_val(&self.1)
respectively. This patch changes the expression used to compute these
offsets so that the optimizer can perform this optimization.
Consider
```rust
fn f(x: &X<dyn Any>) -> &dyn Any {
&x.0
}
```
Before:
```asm
test:
movq %rsi, %rdx
movq 16(%rsi), %rax
leaq -1(%rax), %rcx
negq %rax
andq %rcx, %rax
addq %rdi, %rax
retq
```
After:
```asm
test:
movq %rsi, %rdx
movq %rdi, %rax
retq
```
Update and improve `rustc_codegen_{llvm,ssa}` docs
Fixes#75342.
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
r? ``@pnkfelix`` maybe?
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
For
struct X<T: ?Sized>(T)
struct Y<T: ?Sized>(u8, T)
the offset of the unsized field is
0
mem::align_of_val(&self.1)
respectively. This patch changes the expression used to compute these
offsets so that the optimizer can perform this optimization.
Consider
```rust
fn test(x: &X<dyn Any>) -> &dyn Any {
&x.0
}
```
Before:
```asm
test:
movq %rsi, %rdx
movq 16(%rsi), %rax
leaq -1(%rax), %rcx
negq %rax
andq %rcx, %rax
addq %rdi, %rax
retq
```
After:
```asm
test:
movq %rsi, %rdx
movq %rdi, %rax
retq
```
Always run intrinsics lowering pass
Move intrinsics lowering pass from the optimization phase (where it
would not run if -Zmir-opt-level=0), to the drop lowering phase where it
runs unconditionally.
The implementation of those intrinsics in code generation and
interpreter is unnecessary. Remove it.
This commit adds a Split DWARF compare mode to compiletest so that
debuginfo tests are also tested using Split DWARF in split mode (and
manually in single mode).
Signed-off-by: David Wood <david@davidtw.co>
This commit implements Split DWARF support, wiring up the flag (added in
earlier commits) to the modified FFI wrapper (also from earlier
commits).
Signed-off-by: David Wood <david@davidtw.co>
This commit removes the `TargetMachineFactory` struct and adds a
`TargetMachineFactoryFn` type alias which is used everywhere that the
previous, long type was used.
Signed-off-by: David Wood <david@davidtw.co>
This commit changes some comments to documentation comments so that
they can be read on the generated rustdoc.
Signed-off-by: David Wood <david@davidtw.co>
[mir-opt] Allow debuginfo to be generated for a constant or a Place
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Move intrinsics lowering pass from the optimization phase (where it
would not run if -Zmir-opt-level=0), to the drop lowering phase where it
runs unconditionally.
The implementation of those intrinsics in code generation and
interpreter is unnecessary. Remove it.
rustc_codegen_ssa: use bitcasts instead of type punning for scalar transmutes.
This specifically helps with `f32` <-> `u32` (`from_bits`, `to_bits`) in Rust-GPU (`rustc_codegen_spirv`), where (AFAIK) we don't yet have enough infrastructure to turn type punning memory accesses into SSA bitcasts.
(There may be more instances, but the one I've seen myself is `f32::signum` from `num-traits` inspecting e.g. the sign bit)
Sadly I've had to make an exception for `transmute`s between pointers and non-pointers, as LLVM disallows using `bitcast` for them.
r? `@nagisa` cc `@khyperia`
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Fixes multiple issue with counters, with simplification
Includes a change to the implicit else span in ast_lowering, so coverage
of the implicit else no longer spans the `then` block.
Adds coverage for unused closures and async function bodies.
Fixes: #78542
Adding unreachable regions for known MIR missing from coverage map
Cleaned up PR commits, and removed link-dead-code requirement and tests
Coverage no longer depends on Issue #76038 (`-C link-dead-code` is
no longer needed or enforced, so MSVC can use the same tests as
Linux and MacOS now)
Restrict adding unreachable regions to covered files
Improved the code that adds coverage for uncalled functions (with MIR
but not-codegenned) to avoid generating coverage in files not already
included in the files with covered functions.
Resolved last known issue requiring --emit llvm-ir workaround
Fixed bugs in how unreachable code spans were added.
Warn if `dsymutil` returns an error code
This checks the error code returned by `dsymutil` and warns if it failed. It
also provides the stdout and stderr logs from `dsymutil`, similar to the native
linker step.
I tried to think of ways to test this change, but so far I haven't found a good way, as you'd likely need to inject some nonsensical args into `dsymutil` to induce failure, which feels too artificial to me. Also, https://github.com/rust-lang/rust/issues/79361 suggests Rust is on the verge of disabling `dsymutil` by default, so perhaps it's okay for this change to be untested. In any case, I'm happy to add a test if someone sees a good approach.
Fixes https://github.com/rust-lang/rust/issues/78770
Stop adding '*' at the end of slice and str typenames for MSVC case
When computing debug info for MSVC debuggers, Rust compiler emits C++ style type names for compatibility with .natvis visualizers. All Ref types are treated as equivalences of C++ pointers in this process, and, as a result, their type names end with a '\*'. Since Slice and Str are treated as Ref by the compiler, their type names also end with a '\*'. This causes the .natvis engine for WinDbg fails to display data of Slice and Str objects. We addressed this problem simply by removing the '*' at the end of type names for Slice and Str types.
Debug info in WinDbg before the fix:
Debug info in WinDbg after the fix:
This change has also been tested with debuggers for Visual Studio, VS Code C++ and VS Code LLDB to make sure that it does not affect the behavior of other kinds of debugger.
This checks the error code returned by `dsymutil` and warns if it failed. It
also provides the stdout and stderr logs from `dsymutil`, similar to the native
linker step.
Fixes https://github.com/rust-lang/rust/issues/78770
Properly handle attributes on statements
We now collect tokens for the underlying node wrapped by `StmtKind`
nstead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
Add support for Arm64 Catalyst on ARM Macs
This is an iteration on https://github.com/rust-lang/rust/pull/63467 which was merged a while ago. In the aforementioned PR, I added support for the `X86_64-apple-ios-macabi` target triple, which is Catalyst, iOS apps running on macOS.
Very soon, Apple will launch ARM64 based Macs which will introduce `aarch64_apple_darwin.rs`, macOS apps using the Darwin ABI running on ARM. This PR adds support for Catalyst apps on ARM Macs: iOS apps compiled for the darwin ABI.
I don't have access to a Apple Developer Transition Kit (DTK), so I can't really test if the generated binaries work correctly. I'm vaguely hopeful that somebody with access to a DTK could give this a spin.
Updated the list of white-listed target features for x86
This PR both adds in-source documentation on what to look out for when adding a new (X86) feature set and [adds all that are detectable at run-time in Rust stable as of 1.27.0](https://github.com/rust-lang/stdarch/blob/master/crates/std_detect/src/detect/arch/x86.rs).
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
The reference for LLVM's feature names used is [this file](https://github.com/llvm/llvm-project/blob/master/llvm/include/llvm/Support/X86TargetParser.def).
This PR was motivated as the compiler end's part for allowing #67329 to be adressed over on rust-lang/stdarch
rustc_target: Further cleanup use of target options
Follow up to https://github.com/rust-lang/rust/pull/77729.
Implements items 2 and 4 from the list in https://github.com/rust-lang/rust/pull/77729#issue-500228243.
The first commit collapses uses of `target.options.foo` into `target.foo`.
The second commit renames some target options to avoid tautology:
`target.target_endian` -> `target.endian`
`target.target_c_int_width` -> `target.c_int_width`
`target.target_os` -> `target.os`
`target.target_env` -> `target.env`
`target.target_vendor` -> `target.vendor`
`target.target_family` -> `target.os_family`
`target.target_mcount` -> `target.mcount`
r? `@Mark-Simulacrum`
Monomorphize a type argument of size-of operation during codegen
This wasn't necessary until MIR inliner started to consider drop glue as
a candidate for inlining; introducing for the first time a generic use
of size-of operation.
No test at this point since this only happens with a custom inlining
threshold.
inliner: Use substs_for_mir_body
Changes from 68965 extended the kind of instances that are being
inlined. For some of those, the `instance_mir` returns a MIR body that
is already expressed in terms of the types found in substitution array,
and doesn't need further substitution.
Use `substs_for_mir_body` to take that into account.
Resolves#78529.
Resolves#78560.
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
This wasn't necessary until MIR inliner started to consider drop glue as
a candidate for inlining; introducing for the first time a generic use
of size-of operation.
No test at this point since this only happens with a custom inlining
threshold.
Implementing the Graph traits for the BasicCoverageBlock
graph.
optimized replacement of counters with expressions plus new BCB graphviz
* Avoid adding coverage to unreachable blocks.
* Special case for Goto at the end of the body. Make it non-reportable.
Improved debugging and formatting options (from env)
Don't automatically add counters to BCBs without CoverageSpans. They may
still get counters but only if there are dependencies from
other BCBs that have spans, I think.
Make CodeRegions optional for Counters too. It is
possible to inject counters (`llvm.instrprof.increment` intrinsic calls
without corresponding code regions in the coverage map. An expression
can still uses these counter values.
Refactored instrument_coverage.rs -> instrument_coverage/mod.rs, and
then broke up the mod into multiple files.
Compiling with coverage, with the expression optimization, works on
the json5format crate and its dependencies.
Refactored debug features from mod.rs to debug.rs
Changes from 68965 extended the kind of instances that are being
inlined. For some of those, the `instance_mir` returns a MIR body that
is already expressed in terms of the types found in substitution array,
and doesn't need further substitution.
Use `substs_for_mir_body` to take that into account.
foreign_modules query hash table lookups
When compiling a large monolithic crate we're seeing huge times in the `foreign_modules` query due to repeated iteration over foreign modules (in order to find a module by its id). This implements hash table lookups so that which massively reduces time spent in that query in this particular case. We'll need to see if the overhead of creating the hash table has a negative impact on performance in more normal compilation scenarios.
I'm working with `@wesleywiser` on this.
Add compiler support for LLVM's x86_64 ERMSB feature
This change is needed for compiler-builtins to check for this feature
when implementing memcpy/memset. See:
https://github.com/rust-lang/compiler-builtins/pull/365
Without this change, the following code compiles, but does nothing:
```rust
#[cfg(target_feature = "ermsb")]
pub unsafe fn ermsb_memcpy() { ... }
```
The change just does compile-time detection. I think that runtime
detection will have to come in a follow-up CL to std-detect.
Like all the CPU feature flags, this just references #44839
Signed-off-by: Joe Richey <joerichey@google.com>
rustc_mir: track inlined callees in SourceScopeData.
We now record which MIR scopes are the roots of *other* (inlined) functions's scope trees, which allows us to generate the correct debuginfo in codegen, similar to what LLVM inlining generates.
This PR makes the `ui` test `backtrace-debuginfo` pass, if the MIR inliner is turned on by default.
Also, `#[track_caller]` is now correct in the face of MIR inlining (cc `@anp).`
Fixes#76997.
r? `@rust-lang/wg-mir-opt`
This change is needed for compiler-builtins to check for this feature
when implementing memcpy/memset. See:
https://github.com/rust-lang/compiler-builtins/pull/365
The change just does compile-time detection. I think that runtime
detection will have to come in a follow-up CL to std-detect.
Like all the CPU feature flags, this just references #44839
Signed-off-by: Joe Richey <joerichey@google.com>
Updated the added documentation in llvm_util.rs to note which copies of LLVM need to be inspected.
Removed avx512bf16 and avx512vp2intersect because they are unsupported before LLVM 9 with the build with external LLVM 8 being supported
Re-introduced detection testing previously removed for un-requestable features tsc and mmx
This PR both adds in-source documentation on what to look out for
when adding a new (X86) feature set and adds all that are detectable at run-time in Rust stable
as of 1.27.0.
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
Addresses Issue #78286
Libraries compiled with coverage and linked with out enabling coverage
would fail when attempting to add the library's coverage statements to
the codegen coverage context (None).
Now, if coverage statements are encountered while compiling / linking
with `-Z instrument-coverage` disabled, codegen will *not* attempt to
add code regions to a coverage map, and it will not inject the LLVM
instrprof_increment intrinsic calls.
