These are needed to properly express a function call ABI using a clobber
list, even though we don't support passing actual values into/out of
these registers.
Implement the new desugaring from `try_trait_v2`
~~Currently blocked on https://github.com/rust-lang/rust/issues/84782, which has a PR in https://github.com/rust-lang/rust/pull/84811~~ Rebased atop that fix.
`try_trait_v2` tracking issue: https://github.com/rust-lang/rust/issues/84277
Unfortunately this is already touching a ton of things, so if you have suggestions for good ways to split it up, I'd be happy to hear them. (The combination between the use in the library, the compiler changes, the corresponding diagnostic differences, even MIR tests mean that I don't really have a great plan for it other than trying to have decently-readable commits.
r? `@ghost`
~~(This probably shouldn't go in during the last week before the fork anyway.)~~ Fork happened.
Parse unnamed fields of struct and union type
Added the `unnamed_fields` feature gate.
This is a prototype of [RFC 2102](https://github.com/rust-lang/rust/issues/49804), so any suggestions are greatly appreciated.
r? `@petrochenkov`
have on_completion record subcycles
have on_completion record subcycles
Rework `on_completion` method so that it removes all
provisional cache entries that are "below" a completed
node (while leaving those entries that are not below
the node).
This corrects an imprecise result that could in turn lead
to an incremental compilation failure. Under the old
scheme, if you had:
* A depends on...
* B depends on A
* C depends on...
* D depends on C
* T: 'static
then the provisional results for A, B, C, and D would all
be entangled. Thus, if A was `EvaluatedToOkModuloRegions`
(because of that final condition), then the result for C and
D would also be demoted to "ok modulo regions".
In reality, though, the result for C depends only on C and itself,
and is not dependent on regions. If we happen to evaluate the
cycle starting from C, we would never reach A, and hence the
result would be "ok".
Under the new scheme, the provisional results for C and D
are moved to the permanent cache immediately and are not affected
by the result of A.
Fixes#83538
r? `@Aaron1011`
Remove rustc_args_required_const attribute
Now that stdarch no longer needs it (thanks `@Amanieu!),` we can kill the `rustc_args_required_const` attribute. This means that lifetime extension of references to temporaries is the only remaining job that promotion is performing. :-)
r? `@oli-obk`
Fixes https://github.com/rust-lang/rust/issues/69493
This attribute will cause us to invoke evaluate on every where clause of an
invoked function and to generate an error with the result.
Without this, it is very difficult to observe the effects of invoking the trait
evaluator.
Add asm!() support for PowerPC
This includes GPRs and FPRs only.
Note that this does not include PowerPC64.
For my reference, this was mostly duplicated from PR #73214.
Add auto traits and clone trait migrations for RFC2229
This PR
- renames the existent RFC2229 migration `disjoint_capture_drop_reorder` to `disjoint_capture_migration`
- add additional migrations for auto traits and clone trait
Closesrust-lang/project-rfc-2229#29Closesrust-lang/project-rfc-2229#28
r? `@nikomatsakis`
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
Implement RFC 1260 with feature_name `imported_main`.
This is the second extraction part of #84062 plus additional adjustments.
This (mostly) implements RFC 1260.
However there's still one test case failure in the extern crate case. Maybe `LocalDefId` doesn't work here? I'm not sure.
cc https://github.com/rust-lang/rust/issues/28937
r? `@petrochenkov`
The Eq trait has a special hidden function. MIR `InstrumentCoverage`
would add this function to the coverage map, but it is never called, so
the `Eq` trait would always appear uncovered.
Fixes: #83601
The fix required creating a new function attribute `no_coverage` to mark
functions that should be ignored by `InstrumentCoverage` and the
coverage `mapgen` (during codegen).
While testing, I also noticed two other issues:
* spanview debug file output ICEd on a function with no body. The
workaround for this is included in this PR.
* `assert_*!()` macro coverage can appear covered if followed by another
`assert_*!()` macro. Normally they appear uncovered. I submitted a new
Issue #84561, and added a coverage test to demonstrate this issue.
Cautiously add IntoIterator for arrays by value
Add the attribute described in #84133, `#[rustc_skip_array_during_method_dispatch]`, which effectively hides a trait from method dispatch when the receiver type is an array.
Then cherry-pick `IntoIterator for [T; N]` from #65819 and gate it with that attribute. Arrays can now be used as `IntoIterator` normally, but `array.into_iter()` has edition-dependent behavior, returning `slice::Iter` for 2015 and 2018 editions, or `array::IntoIter` for 2021 and later.
r? `@nikomatsakis`
cc `@LukasKalbertodt` `@rust-lang/libs`
further split up const_fn feature flag
This continues the work on splitting up `const_fn` into separate feature flags:
* `const_fn_trait_bound` for `const fn` with trait bounds
* `const_fn_unsize` for unsizing coercions in `const fn` (looks like only `dyn` unsizing is still guarded here)
I don't know if there are even any things left that `const_fn` guards... at least libcore and liballoc do not need it any more.
`@oli-obk` are you currently able to do reviews?
Implement a lint that highlights all moves larger than a configured limit
Tracking issue: #83518
[MCP 420](https://github.com/rust-lang/compiler-team/issues/420) still ~blazing~ in progress
r? ```@pnkfelix```
The main open issue I see with this minimal impl of the feature is that the lint is immediately "stable" (so it can be named on stable), even if it is never executed on stable. I don't think we have the concept of unstable lint names or hiding lint names without an active feature gate, so that would be a bigger change.
This commit updates rustc, with an applicable LLVM version, to use
LLVM's new `llvm.fpto{u,s}i.sat.*.*` intrinsics to implement saturating
floating-point-to-int conversions. This results in a little bit tighter
codegen for x86/x86_64, but the main purpose of this is to prepare for
upcoming changes to the WebAssembly backend in LLVM where wasm's
saturating float-to-int instructions will now be implemented with these
intrinsics.
This change allows simplifying a good deal of surrounding code, namely
removing a lot of wasm-specific behavior. WebAssembly no longer has any
special-casing of saturating arithmetic instructions and the need for
`fptoint_may_trap` is gone and all handling code for that is now
removed. This means that the only wasm-specific logic is in the
`fpto{s,u}i` instructions which only get used for "out of bounds is
undefined behavior". This does mean that for the WebAssembly target
specifically the Rust compiler will no longer be 100% compatible with
pre-LLVM 12 versions, but it seems like that's unlikely to be relied on
by too many folks.
Note that this change does immediately regress the codegen of saturating
float-to-int casts on WebAssembly due to the specialization of the LLVM
intrinsic not being present in our LLVM fork just yet. I'll be following
up with an LLVM update to pull in those patches, but affects a few other
SIMD things in flight for WebAssembly so I wanted to separate this change.
Eventually the entire `cast_float_to_int` function can be removed when
LLVM 12 is the minimum version, but that will require sinking the
complexity of it into other backends such as Cranelfit.
Remove #[main] attribute.
This removes the #[main] attribute support from the compiler according to the decisions within #29634. For existing use cases within test harness generation, replaced it with a newly-introduced internal attribute `#[rustc_main]`.
This is first part extracted from #84062 .
Closes#29634.
r? `@petrochenkov`
Add simd_{round,trunc} intrinsics
LLVM supports many functions from math.h in its IR. Many of these
have SIMD instructions on various platforms. So, let's add round and
trunc so std::arch can use them.
Yes, exact comparison is intentional: rounding must always return a
valid integer-equal value, except for inf/NAN.
LLVM supports many functions from math.h in its IR. Many of these have
single-instruction variants on various platforms. So, let's add them so
std::arch can use them.
Yes, exact comparison is intentional: rounding must always return a
valid integer-equal value, except for inf/NAN.
add lint deref_nullptr detecting when a null ptr is dereferenced
fixes#83856
changelog: add lint that detect code like
```rust
unsafe {
&*core::ptr::null::<i32>()
};
unsafe {
addr_of!(std::ptr::null::<i32>())
};
let x: i32 = unsafe {*core::ptr::null()};
let x: i32 = unsafe {*core::ptr::null_mut()};
unsafe {*(0 as *const i32)};
unsafe {*(core::ptr::null() as *const i32)};
```
```
warning: Dereferencing a null pointer causes undefined behavior
--> src\main.rs:5:26
|
5 | let x: i32 = unsafe {*core::ptr::null()};
| ^^^^^^^^^^^^^^^^^^
| |
| a null pointer is dereferenced
| this code causes undefined behavior when executed
|
= note: `#[warn(deref_nullptr)]` on by default
```
Limitation:
It does not detect code like
```rust
const ZERO: usize = 0;
unsafe {*(ZERO as *const i32)};
```
or code where `0` is not directly a literal
This commit implements the idea of a new ABI for the WebAssembly target,
one called `"wasm"`. This ABI is entirely of my own invention
and has no current precedent, but I think that the addition of this ABI
might help solve a number of issues with the WebAssembly targets.
When `wasm32-unknown-unknown` was first added to Rust I naively
"implemented an abi" for the target. I then went to write `wasm-bindgen`
which accidentally relied on details of this ABI. Turns out the ABI
definition didn't match C, which is causing issues for C/Rust interop.
Currently the compiler has a "wasm32 bindgen compat" ABI which is the
original implementation I added, and it's purely there for, well,
`wasm-bindgen`.
Another issue with the WebAssembly target is that it's not clear to me
when and if the default C ABI will change to account for WebAssembly's
multi-value feature (a feature that allows functions to return multiple
values). Even if this does happen, though, it seems like the C ABI will
be guided based on the performance of WebAssembly code and will likely
not match even what the current wasm-bindgen-compat ABI is today. This
leaves a hole in Rust's expressivity in binding WebAssembly where given
a particular import type, Rust may not be able to import that signature
with an updated C ABI for multi-value.
To fix these issues I had the idea of a new ABI for WebAssembly, one
called `wasm`. The definition of this ABI is "what you write
maps straight to wasm". The goal here is that whatever you write down in
the parameter list or in the return values goes straight into the
function's signature in the WebAssembly file. This special ABI is for
intentionally matching the ABI of an imported function from the
environment or exporting a function with the right signature.
With the addition of a new ABI, this enables rustc to:
* Eventually remove the "wasm-bindgen compat hack". Once this
ABI is stable wasm-bindgen can switch to using it everywhere.
Afterwards the wasm32-unknown-unknown target can have its default ABI
updated to match C.
* Expose the ability to precisely match an ABI signature for a
WebAssembly function, regardless of what the C ABI that clang chooses
turns out to be.
* Continue to evolve the definition of the default C ABI to match what
clang does on all targets, since the purpose of that ABI will be
explicitly matching C rather than generating particular function
imports/exports.
Naturally this is implemented as an unstable feature initially, but it
would be nice for this to get stabilized (if it works) in the near-ish
future to remove the wasm32-unknown-unknown incompatibility with the C
ABI. Doing this, however, requires the feature to be on stable because
wasm-bindgen works with stable Rust.
The addition of `cfg(wasm)` was an oversight on my end that has a number
of downsides:
* It was introduced as an insta-stable addition, forgoing the usual
staging mechanism we use for potentially far-reaching changes;
* It is a breaking change for people who are using `--cfg wasm` either
directly or via cargo for other purposes;
* It is not entirely clear if a bare `wasm` cfg is a right option or
whether `wasm` family of targets are special enough to warrant
special-casing these targets specifically.
As for the last point, there appears to be a fair amount of support for
reducing the boilerplate in specifying architectures from the same
family, while ignoring their pointer width. The suggested way forward
would be to propose such a change as a separate RFC as it is potentially
a quite contentious addition.
Allow specifying alignment for functions
Fixes#75072
This allows the user to specify alignment for functions, which can be useful for low level work where functions need to necessarily be aligned to a specific value.
I believe the error cases not covered in the match are caught earlier based on my testing so I had them just return `None`.
Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
Fixes#80936.
"spotlight" is not a very specific or self-explaining name.
Additionally, the dialog that it triggers is called "Notable traits".
So, "notable trait" is a better name.
* Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
* Rename `#![feature(doc_spotlight)]` to `#![feature(doc_notable_trait)]`
* Update documentation
* Improve documentation
r? `@Manishearth`
This currently creates a field which is always false on GenericParamDefKind for future use when
consts are permitted to have defaults
Update const_generics:default locations
Previously just ignored them, now actually do something about them.
Fix using type check instead of value
Add parsing
This adds all the necessary changes to lower const-generics defaults from parsing.
Change P<Expr> to AnonConst
This matches the arguments passed to instantiations of const generics, and makes it specific to
just anonymous constants.
Attempt to fix lowering bugs
"spotlight" is not a very specific or self-explaining name.
Additionally, the dialog that it triggers is called "Notable traits".
So, "notable trait" is a better name.
* Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
* Rename `#![feature(doc_spotlight)]` to `#![feature(doc_notable_trait)]`
* Update documentation
* Improve documentation
