move required_consts check to general post-mono-check function
This factors some code that is common between the interpreter and the codegen backends into shared helper functions. Also as a side-effect the interpreter now uses the same `eval` functions as everyone else to get the evaluated MIR constants.
Also this is in preparation for another post-mono check that will be needed for (the current hackfix for) https://github.com/rust-lang/rust/issues/115709: ensuring that all locals are dynamically sized.
I didn't expect this to change diagnostics, but it's just cycle errors that change.
r? `@oli-obk`
treat host effect params as erased in codegen
This fixes the changes brought to codegen tests when effect params are added to libcore, by not attempting to monomorphize functions that get the host param by being `const fn`.
r? `@oli-obk`
This fixes the changes brought to codegen tests when effect params are
added to libcore, by not attempting to monomorphize functions that get
the host param by being `const fn`.
Rework `no_coverage` to `coverage(off)`
As discussed at the tail of https://github.com/rust-lang/rust/issues/84605 this replaces the `no_coverage` attribute with a `coverage` attribute that takes sub-parameters (currently `off` and `on`) to control the coverage instrumentation.
Allows future-proofing for things like `coverage(off, reason="Tested live", issue="#12345")` or similar.
Use the same DISubprogram for each instance of the same inlined function within a caller
# Issue Details:
The call to `panic` within a function like `Option::unwrap` is translated to LLVM as a `tail call` (as it will never return), when multiple calls to the same function like this are inlined LLVM will notice the common `tail call` block (i.e., loading the same panic string + location info and then calling `panic`) and merge them together.
When merging these instructions together, LLVM will also attempt to merge the debug locations as well, but this fails (i.e., debug info is dropped) as Rust emits a new `DISubprogram` at each inline site thus LLVM doesn't recognize that these are actually the same function and so thinks that there isn't a common debug location.
As an example of this, consider the following program:
```rust
#[no_mangle]
fn add_numbers(x: &Option<i32>, y: &Option<i32>) -> i32 {
let x1 = x.unwrap();
let y1 = y.unwrap();
x1 + y1
}
```
When building for x86_64 Windows using 1.72 it generates (note the lack of `.cv_loc` before the call to `panic`, thus it will be attributed to the same line at the `addq` instruction):
```llvm
.cv_loc 0 1 3 0 # src\lib.rs:3:0
addq $40, %rsp
retq
leaq .Lalloc_f570dea0a53168780ce9a91e67646421(%rip), %rcx
leaq .Lalloc_629ace53b7e5b76aaa810d549cc84ea3(%rip), %r8
movl $43, %edx
callq _ZN4core9panicking5panic17h12e60b9063f6dee8E
int3
```
# Fix Details:
Cache the `DISubprogram` emitted for each inlined function instance within a caller so that this can be reused if that instance is encountered again.
Ideally, we would also deduplicate child scopes and variables, however my attempt to do that with #114643 resulted in asserts when building for Linux (#115156) which would require some deep changes to Rust to fix (#115455).
Instead, when using an inlined function as a debug scope, we will also create a new child scope such that subsequent child scopes and variables do not collide (from LLVM's perspective).
After this change the above assembly now (with <https://reviews.llvm.org/D159226> as well) shows the `panic!` was inlined from `unwrap` in `option.rs` at line 935 into the current function in `lib.rs` at line 0 (line 0 is emitted since it is ambiguous which line to use as there were two inline sites that lead to this same code):
```llvm
.cv_loc 0 1 3 0 # src\lib.rs:3:0
addq $40, %rsp
retq
.cv_inline_site_id 6 within 0 inlined_at 1 0 0
.cv_loc 6 2 935 0 # library\core\src\option.rs:935:0
leaq .Lalloc_5f55955de67e57c79064b537689facea(%rip), %rcx
leaq .Lalloc_e741d4de8cb5801e1fd7a6c6795c1559(%rip), %r8
movl $43, %edx
callq _ZN4core9panicking5panic17hde1558f32d5b1c04E
int3
```
Add CL and CMD into to pdb debug info
Partial fix for https://github.com/rust-lang/rust/issues/96475
The Arg0 and CommandLineArgs of the MCTargetOptions cpp class are not set within bb548f9645/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp (L378)
This causes LLVM to not neither output any compiler path (cl) nor the arguments that were used when invoking it (cmd) in the PDB file.
This fix adds the missing information to the target machine so LLVM can use it.
Always add LC_BUILD_VERSION for metadata object files
As of Xcode 15 Apple's linker has become a bit more strict about the warnings it produces. One of those new warnings requires all valid Mach-O object files in an archive to have a LC_BUILD_VERSION load command:
```
ld: warning: no platform load command found in 'ARCHIVE[arm64][2106](lib.rmeta)', assuming: iOS-simulator
```
This was already being done for Mac Catalyst so this change expands this logic to include it for all Apple platforms. I filed this behavior change as FB12546320 and was told it was the new intentional behavior.
Use the same DISubprogram for each instance of the same inlined function within a caller
# Issue Details:
The call to `panic` within a function like `Option::unwrap` is translated to LLVM as a `tail call` (as it will never return), when multiple calls to the same function like this is inlined LLVM will notice the common `tail call` block (i.e., loading the same panic string + location info and then calling `panic`) and merge them together.
When merging these instructions together, LLVM will also attempt to merge the debug locations as well, but this fails (i.e., debug info is dropped) as Rust emits a new `DISubprogram` at each inline site thus LLVM doesn't recognize that these are actually the same function and so thinks that there isn't a common debug location.
As an example of this when building for x86_64 Windows (note the lack of `.cv_loc` before the call to `panic`, thus it will be attributed to the same line at the `addq` instruction):
```
.cv_loc 0 1 23 0 # src\lib.rs:23:0
addq $40, %rsp
retq
leaq .Lalloc_f570dea0a53168780ce9a91e67646421(%rip), %rcx
leaq .Lalloc_629ace53b7e5b76aaa810d549cc84ea3(%rip), %r8
movl $43, %edx
callq _ZN4core9panicking5panic17h12e60b9063f6dee8E
int3
```
# Fix Details:
Cache the `DISubprogram` emitted for each inlined function instance within a caller so that this can be reused if that instance is encountered again, this also requires caching the `DILexicalBlock` and `DIVariable` objects to avoid creating duplicates.
After this change the above assembly now looks like:
```
.cv_loc 0 1 23 0 # src\lib.rs:23:0
addq $40, %rsp
retq
.cv_inline_site_id 5 within 0 inlined_at 1 0 0
.cv_inline_site_id 6 within 5 inlined_at 1 12 0
.cv_loc 6 2 935 0 # library\core\src\option.rs:935:0
leaq .Lalloc_5f55955de67e57c79064b537689facea(%rip), %rcx
leaq .Lalloc_e741d4de8cb5801e1fd7a6c6795c1559(%rip), %r8
movl $43, %edx
callq _ZN4core9panicking5panic17hde1558f32d5b1c04E
int3
```
As of Xcode 15 Apple's linker has become a bit more strict about the
warnings it produces. One of those new warnings requires all valid
Mach-O object files in an archive to have a LC_BUILD_VERSION load
command:
```
ld: warning: no platform load command found in 'ARCHIVE[arm64][2106](lib.rmeta)', assuming: iOS-simulator
```
This was already being done for Mac Catalyst so this change expands this
logic to include it for all Apple platforms. I filed this behavior
change as FB12546320 and was told it was the new intentional behavior.
Infer `Lld::No` linker hint when the linker stem is a generic compiler driver
This PR basically reverts the temporary solution in https://github.com/rust-lang/rust/pull/113631 to a more long-term solution.
r? ``@petrochenkov``
In [this comment](https://github.com/rust-lang/rust/pull/113631#issuecomment-1634598238), you had ideas about a long-term solution:
> I wonder what a good non-temporary solution for the inference would look like.
>
> * If the default is `(Cc::No, Lld::Yes)` (e.g. `rust-lld`)
>
> * and we switch to some specific platform compiler (e.g. `-C linker=arm-none-eabi-gcc`), should we change to `Lld::No`? Maybe yes?
> * and we switch to some non-default but generic compiler `-C linker=clang`? Then maybe not?
>
> * If the default is `(Cc::Yes, Lld::Yes)` (e.g. future x86_64 linux with default LLD)
>
> * and we switch to some specific platform compiler (e.g. `-C linker=arm-none-eabi-gcc`), should we change to `Lld::No`? Maybe yes?
> * and we switch to some non-default but generic compiler `-C linker=clang`? Then maybe not?
>
I believe that we should infer the `Lld::No` linker hint for any `-Clinker` override, and all the cases above:
- the linker drivers have their own defaults, so in my mind `-Clinker` is a signal to use its default linker / flavor, rather than ours or the target's. In the case of generic compilers, it's more likely than not going to be `Lld::No`. I would expect this to be the case in general, even when including platform-specific compilers.
- the guess will be wrong if the linker driver uses lld by default (and we also don't want to search for `-fuse-ld` link args), but will work in the more common cases. And the minority of other cases can fix the wrong guess by opting into the precise linker flavor.
- this also ensures backwards-compatibility: today, even on targets with an lld default and overriding the linker, rustc will not use lld. That includes `thumbv6m-none-eabi` where issue #113597 happened.
It looks like the simplest option, and the one with least churn: we maintain the current behavior in ambiguous cases.
I've tested that this works on #113597, as expected from the failure.
(I also have a no-std `run-make` test using a custom target json spec: basically simulating a future `x86_64-unknown-linux-gnu` using an lld flavor by default, to check that e.g. `-Clinker=clang` doesn't use lld. I could add that test to this PR, but IIUC such a custom target requires `cargo -Z build-std` and we have no tests depending on this cargo feature yet. Let me know if you want to add this test of the linker inference for such targets.)
What do you think ?
